1 /*
2 * linux/arch/unicore32/kernel/pci.c
3 *
4 * Code specific to PKUnity SoC and UniCore ISA
5 *
6 * Copyright (C) 2001-2010 GUAN Xue-tao
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 *
12 * PCI bios-type initialisation for PCI machines
13 *
14 */
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/interrupt.h>
18 #include <linux/pci.h>
19 #include <linux/slab.h>
20 #include <linux/init.h>
21 #include <linux/io.h>
22
23 static int debug_pci;
24
25 #define CONFIG_CMD(bus, devfn, where) \
26 (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
27
28 static int
puv3_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)29 puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
30 int size, u32 *value)
31 {
32 writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
33 switch (size) {
34 case 1:
35 *value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
36 break;
37 case 2:
38 *value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
39 break;
40 case 4:
41 *value = readl(PCICFG_DATA);
42 break;
43 }
44 return PCIBIOS_SUCCESSFUL;
45 }
46
47 static int
puv3_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)48 puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
49 int size, u32 value)
50 {
51 writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
52 switch (size) {
53 case 1:
54 writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
55 | FIELD(value, 8, (where&3)*8), PCICFG_DATA);
56 break;
57 case 2:
58 writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
59 | FIELD(value, 16, (where&2)*8), PCICFG_DATA);
60 break;
61 case 4:
62 writel(value, PCICFG_DATA);
63 break;
64 }
65 return PCIBIOS_SUCCESSFUL;
66 }
67
68 struct pci_ops pci_puv3_ops = {
69 .read = puv3_read_config,
70 .write = puv3_write_config,
71 };
72
pci_puv3_preinit(void)73 void pci_puv3_preinit(void)
74 {
75 printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
76 /* config PCI bridge base */
77 writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
78
79 writel(0, PCIBRI_AHBCTL0);
80 writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
81 writel(0xFFFF0000, PCIBRI_AHBAMR0);
82 writel(0, PCIBRI_AHBTAR0);
83
84 writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
85 writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
86 writel(0xFFFF0000, PCIBRI_AHBAMR1);
87 writel(0x00000000, PCIBRI_AHBTAR1);
88
89 writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
90 writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
91 writel(0xF8000000, PCIBRI_AHBAMR2);
92 writel(0, PCIBRI_AHBTAR2);
93
94 writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
95
96 writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
97 writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
98 writel(0xF8000000, PCIBRI_PCIAMR0);
99 writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
100
101 writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
102 }
103
pci_puv3_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)104 static int __init pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
105 {
106 if (dev->bus->number == 0) {
107 #ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
108 if (dev->devfn == 0x00)
109 return IRQ_PCIINTA;
110 else if (dev->devfn == 0x08)
111 return IRQ_PCIINTB;
112 else if (dev->devfn == 0x10)
113 return IRQ_PCIINTC;
114 else if (dev->devfn == 0x18)
115 return IRQ_PCIINTD;
116 #endif
117 #ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
118 if (dev->devfn == 0x30)
119 return IRQ_PCIINTB;
120 else if (dev->devfn == 0x60)
121 return IRQ_PCIINTC;
122 else if (dev->devfn == 0x58)
123 return IRQ_PCIINTD;
124 #endif
125 #if defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
126 /* only support 2 pci devices */
127 if (dev->devfn == 0x00)
128 return IRQ_PCIINTC; /* sata */
129 #endif
130 }
131 return -1;
132 }
133
134 /*
135 * Only first 128MB of memory can be accessed via PCI.
136 * We use GFP_DMA to allocate safe buffers to do map/unmap.
137 * This is really ugly and we need a better way of specifying
138 * DMA-capable regions of memory.
139 */
puv3_pci_adjust_zones(unsigned long * zone_size,unsigned long * zhole_size)140 void __init puv3_pci_adjust_zones(unsigned long *zone_size,
141 unsigned long *zhole_size)
142 {
143 unsigned int sz = SZ_128M >> PAGE_SHIFT;
144
145 /*
146 * Only adjust if > 128M on current system
147 */
148 if (zone_size[0] <= sz)
149 return;
150
151 zone_size[1] = zone_size[0] - sz;
152 zone_size[0] = sz;
153 zhole_size[1] = zhole_size[0];
154 zhole_size[0] = 0;
155 }
156
157 /*
158 * If the bus contains any of these devices, then we must not turn on
159 * parity checking of any kind.
160 */
pdev_bad_for_parity(struct pci_dev * dev)161 static inline int pdev_bad_for_parity(struct pci_dev *dev)
162 {
163 return 0;
164 }
165
166 /*
167 * pcibios_fixup_bus - Called after each bus is probed,
168 * but before its children are examined.
169 */
pcibios_fixup_bus(struct pci_bus * bus)170 void pcibios_fixup_bus(struct pci_bus *bus)
171 {
172 struct pci_dev *dev;
173 u16 features = PCI_COMMAND_SERR
174 | PCI_COMMAND_PARITY
175 | PCI_COMMAND_FAST_BACK;
176
177 bus->resource[0] = &ioport_resource;
178 bus->resource[1] = &iomem_resource;
179
180 /*
181 * Walk the devices on this bus, working out what we can
182 * and can't support.
183 */
184 list_for_each_entry(dev, &bus->devices, bus_list) {
185 u16 status;
186
187 pci_read_config_word(dev, PCI_STATUS, &status);
188
189 /*
190 * If any device on this bus does not support fast back
191 * to back transfers, then the bus as a whole is not able
192 * to support them. Having fast back to back transfers
193 * on saves us one PCI cycle per transaction.
194 */
195 if (!(status & PCI_STATUS_FAST_BACK))
196 features &= ~PCI_COMMAND_FAST_BACK;
197
198 if (pdev_bad_for_parity(dev))
199 features &= ~(PCI_COMMAND_SERR
200 | PCI_COMMAND_PARITY);
201
202 switch (dev->class >> 8) {
203 case PCI_CLASS_BRIDGE_PCI:
204 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
205 status |= PCI_BRIDGE_CTL_PARITY
206 | PCI_BRIDGE_CTL_MASTER_ABORT;
207 status &= ~(PCI_BRIDGE_CTL_BUS_RESET
208 | PCI_BRIDGE_CTL_FAST_BACK);
209 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
210 break;
211
212 case PCI_CLASS_BRIDGE_CARDBUS:
213 pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
214 &status);
215 status |= PCI_CB_BRIDGE_CTL_PARITY
216 | PCI_CB_BRIDGE_CTL_MASTER_ABORT;
217 pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
218 status);
219 break;
220 }
221 }
222
223 /*
224 * Now walk the devices again, this time setting them up.
225 */
226 list_for_each_entry(dev, &bus->devices, bus_list) {
227 u16 cmd;
228
229 pci_read_config_word(dev, PCI_COMMAND, &cmd);
230 cmd |= features;
231 pci_write_config_word(dev, PCI_COMMAND, cmd);
232
233 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
234 L1_CACHE_BYTES >> 2);
235 }
236
237 /*
238 * Propagate the flags to the PCI bridge.
239 */
240 if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
241 if (features & PCI_COMMAND_FAST_BACK)
242 bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
243 if (features & PCI_COMMAND_PARITY)
244 bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
245 }
246
247 /*
248 * Report what we did for this bus
249 */
250 printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
251 bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
252 }
253 EXPORT_SYMBOL(pcibios_fixup_bus);
254
pci_common_init(void)255 static int __init pci_common_init(void)
256 {
257 struct pci_bus *puv3_bus;
258
259 pci_puv3_preinit();
260
261 puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL);
262
263 if (!puv3_bus)
264 panic("PCI: unable to scan bus!");
265
266 pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
267
268 pci_bus_size_bridges(puv3_bus);
269 pci_bus_assign_resources(puv3_bus);
270 pci_bus_add_devices(puv3_bus);
271 return 0;
272 }
273 subsys_initcall(pci_common_init);
274
pcibios_setup(char * str)275 char * __init pcibios_setup(char *str)
276 {
277 if (!strcmp(str, "debug")) {
278 debug_pci = 1;
279 return NULL;
280 }
281 return str;
282 }
283
pcibios_set_master(struct pci_dev * dev)284 void pcibios_set_master(struct pci_dev *dev)
285 {
286 /* No special bus mastering setup handling */
287 }
288
289 /*
290 * From arch/i386/kernel/pci-i386.c:
291 *
292 * We need to avoid collisions with `mirrored' VGA ports
293 * and other strange ISA hardware, so we always want the
294 * addresses to be allocated in the 0x000-0x0ff region
295 * modulo 0x400.
296 *
297 * Why? Because some silly external IO cards only decode
298 * the low 10 bits of the IO address. The 0x00-0xff region
299 * is reserved for motherboard devices that decode all 16
300 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
301 * but we want to try to avoid allocating at 0x2900-0x2bff
302 * which might be mirrored at 0x0100-0x03ff..
303 */
pcibios_align_resource(void * data,const struct resource * res,resource_size_t size,resource_size_t align)304 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
305 resource_size_t size, resource_size_t align)
306 {
307 resource_size_t start = res->start;
308
309 if (res->flags & IORESOURCE_IO && start & 0x300)
310 start = (start + 0x3ff) & ~0x3ff;
311
312 start = (start + align - 1) & ~(align - 1);
313
314 return start;
315 }
316
317 /**
318 * pcibios_enable_device - Enable I/O and memory.
319 * @dev: PCI device to be enabled
320 */
pcibios_enable_device(struct pci_dev * dev,int mask)321 int pcibios_enable_device(struct pci_dev *dev, int mask)
322 {
323 u16 cmd, old_cmd;
324 int idx;
325 struct resource *r;
326
327 pci_read_config_word(dev, PCI_COMMAND, &cmd);
328 old_cmd = cmd;
329 for (idx = 0; idx < 6; idx++) {
330 /* Only set up the requested stuff */
331 if (!(mask & (1 << idx)))
332 continue;
333
334 r = dev->resource + idx;
335 if (!r->start && r->end) {
336 printk(KERN_ERR "PCI: Device %s not available because"
337 " of resource collisions\n", pci_name(dev));
338 return -EINVAL;
339 }
340 if (r->flags & IORESOURCE_IO)
341 cmd |= PCI_COMMAND_IO;
342 if (r->flags & IORESOURCE_MEM)
343 cmd |= PCI_COMMAND_MEMORY;
344 }
345
346 /*
347 * Bridges (eg, cardbus bridges) need to be fully enabled
348 */
349 if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
350 cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
351
352 if (cmd != old_cmd) {
353 printk("PCI: enabling device %s (%04x -> %04x)\n",
354 pci_name(dev), old_cmd, cmd);
355 pci_write_config_word(dev, PCI_COMMAND, cmd);
356 }
357 return 0;
358 }
359
pci_mmap_page_range(struct pci_dev * dev,struct vm_area_struct * vma,enum pci_mmap_state mmap_state,int write_combine)360 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
361 enum pci_mmap_state mmap_state, int write_combine)
362 {
363 unsigned long phys;
364
365 if (mmap_state == pci_mmap_io)
366 return -EINVAL;
367
368 phys = vma->vm_pgoff;
369
370 /*
371 * Mark this as IO
372 */
373 vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
374
375 if (remap_pfn_range(vma, vma->vm_start, phys,
376 vma->vm_end - vma->vm_start,
377 vma->vm_page_prot))
378 return -EAGAIN;
379
380 return 0;
381 }
382