• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /**************************************************************************
2  * Copyright (c) 2011, Intel Corporation.
3  * All Rights Reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms and conditions of the GNU General Public License,
7  * version 2, as published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
17  *
18  **************************************************************************/
19 
20 #include <linux/backlight.h>
21 #include <linux/module.h>
22 #include <linux/dmi.h>
23 #include <drm/drmP.h>
24 #include <drm/drm.h>
25 #include <drm/gma_drm.h>
26 #include "psb_drv.h"
27 #include "psb_reg.h"
28 #include "psb_intel_reg.h"
29 #include <asm/intel-mid.h>
30 #include <asm/intel_scu_ipc.h>
31 #include "mid_bios.h"
32 #include "intel_bios.h"
33 
oaktrail_output_init(struct drm_device * dev)34 static int oaktrail_output_init(struct drm_device *dev)
35 {
36 	struct drm_psb_private *dev_priv = dev->dev_private;
37 	if (dev_priv->iLVDS_enable)
38 		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
39 	else
40 		dev_err(dev->dev, "DSI is not supported\n");
41 	if (dev_priv->hdmi_priv)
42 		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
43 
44 	psb_intel_sdvo_init(dev, SDVOB);
45 
46 	return 0;
47 }
48 
49 /*
50  *	Provide the low level interfaces for the Moorestown backlight
51  */
52 
53 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
54 
55 #define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
56 #define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
57 #define BLC_PWM_FREQ_CALC_CONSTANT 32
58 #define MHz 1000000
59 #define BLC_ADJUSTMENT_MAX 100
60 
61 static struct backlight_device *oaktrail_backlight_device;
62 static int oaktrail_brightness;
63 
oaktrail_set_brightness(struct backlight_device * bd)64 static int oaktrail_set_brightness(struct backlight_device *bd)
65 {
66 	struct drm_device *dev = bl_get_data(oaktrail_backlight_device);
67 	struct drm_psb_private *dev_priv = dev->dev_private;
68 	int level = bd->props.brightness;
69 	u32 blc_pwm_ctl;
70 	u32 max_pwm_blc;
71 
72 	/* Percentage 1-100% being valid */
73 	if (level < 1)
74 		level = 1;
75 
76 	if (gma_power_begin(dev, 0)) {
77 		/* Calculate and set the brightness value */
78 		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
79 		blc_pwm_ctl = level * max_pwm_blc / 100;
80 
81 		/* Adjust the backlight level with the percent in
82 		 * dev_priv->blc_adj1;
83 		 */
84 		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
85 		blc_pwm_ctl = blc_pwm_ctl / 100;
86 
87 		/* Adjust the backlight level with the percent in
88 		 * dev_priv->blc_adj2;
89 		 */
90 		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
91 		blc_pwm_ctl = blc_pwm_ctl / 100;
92 
93 		/* force PWM bit on */
94 		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
95 		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
96 		gma_power_end(dev);
97 	}
98 	oaktrail_brightness = level;
99 	return 0;
100 }
101 
oaktrail_get_brightness(struct backlight_device * bd)102 static int oaktrail_get_brightness(struct backlight_device *bd)
103 {
104 	/* return locally cached var instead of HW read (due to DPST etc.) */
105 	/* FIXME: ideally return actual value in case firmware fiddled with
106 	   it */
107 	return oaktrail_brightness;
108 }
109 
device_backlight_init(struct drm_device * dev)110 static int device_backlight_init(struct drm_device *dev)
111 {
112 	struct drm_psb_private *dev_priv = dev->dev_private;
113 	unsigned long core_clock;
114 	u16 bl_max_freq;
115 	uint32_t value;
116 	uint32_t blc_pwm_precision_factor;
117 
118 	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
119 	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
120 	bl_max_freq = 256;
121 	/* this needs to be set elsewhere */
122 	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
123 
124 	core_clock = dev_priv->core_freq;
125 
126 	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
127 	value *= blc_pwm_precision_factor;
128 	value /= bl_max_freq;
129 	value /= blc_pwm_precision_factor;
130 
131 	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
132 			return -ERANGE;
133 
134 	if (gma_power_begin(dev, false)) {
135 		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
136 		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
137 		gma_power_end(dev);
138 	}
139 	return 0;
140 }
141 
142 static const struct backlight_ops oaktrail_ops = {
143 	.get_brightness = oaktrail_get_brightness,
144 	.update_status  = oaktrail_set_brightness,
145 };
146 
oaktrail_backlight_init(struct drm_device * dev)147 static int oaktrail_backlight_init(struct drm_device *dev)
148 {
149 	struct drm_psb_private *dev_priv = dev->dev_private;
150 	int ret;
151 	struct backlight_properties props;
152 
153 	memset(&props, 0, sizeof(struct backlight_properties));
154 	props.max_brightness = 100;
155 	props.type = BACKLIGHT_PLATFORM;
156 
157 	oaktrail_backlight_device = backlight_device_register("oaktrail-bl",
158 				NULL, (void *)dev, &oaktrail_ops, &props);
159 
160 	if (IS_ERR(oaktrail_backlight_device))
161 		return PTR_ERR(oaktrail_backlight_device);
162 
163 	ret = device_backlight_init(dev);
164 	if (ret < 0) {
165 		backlight_device_unregister(oaktrail_backlight_device);
166 		return ret;
167 	}
168 	oaktrail_backlight_device->props.brightness = 100;
169 	oaktrail_backlight_device->props.max_brightness = 100;
170 	backlight_update_status(oaktrail_backlight_device);
171 	dev_priv->backlight_device = oaktrail_backlight_device;
172 	return 0;
173 }
174 
175 #endif
176 
177 /*
178  *	Provide the Moorestown specific chip logic and low level methods
179  *	for power management
180  */
181 
182 /**
183  *	oaktrail_save_display_registers	-	save registers lost on suspend
184  *	@dev: our DRM device
185  *
186  *	Save the state we need in order to be able to restore the interface
187  *	upon resume from suspend
188  */
oaktrail_save_display_registers(struct drm_device * dev)189 static int oaktrail_save_display_registers(struct drm_device *dev)
190 {
191 	struct drm_psb_private *dev_priv = dev->dev_private;
192 	struct psb_save_area *regs = &dev_priv->regs;
193 	struct psb_pipe *p = &regs->pipe[0];
194 	int i;
195 	u32 pp_stat;
196 
197 	/* Display arbitration control + watermarks */
198 	regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
199 	regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
200 	regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
201 	regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
202 	regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
203 	regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
204 	regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
205 	regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
206 
207 	/* Pipe & plane A info */
208 	p->conf = PSB_RVDC32(PIPEACONF);
209 	p->src = PSB_RVDC32(PIPEASRC);
210 	p->fp0 = PSB_RVDC32(MRST_FPA0);
211 	p->fp1 = PSB_RVDC32(MRST_FPA1);
212 	p->dpll = PSB_RVDC32(MRST_DPLL_A);
213 	p->htotal = PSB_RVDC32(HTOTAL_A);
214 	p->hblank = PSB_RVDC32(HBLANK_A);
215 	p->hsync = PSB_RVDC32(HSYNC_A);
216 	p->vtotal = PSB_RVDC32(VTOTAL_A);
217 	p->vblank = PSB_RVDC32(VBLANK_A);
218 	p->vsync = PSB_RVDC32(VSYNC_A);
219 	regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
220 	p->cntr = PSB_RVDC32(DSPACNTR);
221 	p->stride = PSB_RVDC32(DSPASTRIDE);
222 	p->addr = PSB_RVDC32(DSPABASE);
223 	p->surf = PSB_RVDC32(DSPASURF);
224 	p->linoff = PSB_RVDC32(DSPALINOFF);
225 	p->tileoff = PSB_RVDC32(DSPATILEOFF);
226 
227 	/* Save cursor regs */
228 	regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
229 	regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
230 	regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
231 
232 	/* Save palette (gamma) */
233 	for (i = 0; i < 256; i++)
234 		p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2));
235 
236 	if (dev_priv->hdmi_priv)
237 		oaktrail_hdmi_save(dev);
238 
239 	/* Save performance state */
240 	regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
241 
242 	/* LVDS state */
243 	regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
244 	regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
245 	regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
246 	regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
247 	regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
248 	regs->psb.saveLVDS = PSB_RVDC32(LVDS);
249 	regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
250 	regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
251 	regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
252 	regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
253 
254 	/* HW overlay */
255 	regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
256 	regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
257 	regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
258 	regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
259 	regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
260 	regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
261 	regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
262 
263 	/* DPST registers */
264 	regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
265 					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
266 	regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
267 					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
268 	regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
269 
270 	if (dev_priv->iLVDS_enable) {
271 		/* Shut down the panel */
272 		PSB_WVDC32(0, PP_CONTROL);
273 
274 		do {
275 			pp_stat = PSB_RVDC32(PP_STATUS);
276 		} while (pp_stat & 0x80000000);
277 
278 		/* Turn off the plane */
279 		PSB_WVDC32(0x58000000, DSPACNTR);
280 		/* Trigger the plane disable */
281 		PSB_WVDC32(0, DSPASURF);
282 
283 		/* Wait ~4 ticks */
284 		msleep(4);
285 
286 		/* Turn off pipe */
287 		PSB_WVDC32(0x0, PIPEACONF);
288 		/* Wait ~8 ticks */
289 		msleep(8);
290 
291 		/* Turn off PLLs */
292 		PSB_WVDC32(0, MRST_DPLL_A);
293 	}
294 	return 0;
295 }
296 
297 /**
298  *	oaktrail_restore_display_registers	-	restore lost register state
299  *	@dev: our DRM device
300  *
301  *	Restore register state that was lost during suspend and resume.
302  */
oaktrail_restore_display_registers(struct drm_device * dev)303 static int oaktrail_restore_display_registers(struct drm_device *dev)
304 {
305 	struct drm_psb_private *dev_priv = dev->dev_private;
306 	struct psb_save_area *regs = &dev_priv->regs;
307 	struct psb_pipe *p = &regs->pipe[0];
308 	u32 pp_stat;
309 	int i;
310 
311 	/* Display arbitration + watermarks */
312 	PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
313 	PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
314 	PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
315 	PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
316 	PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
317 	PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
318 	PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
319 	PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
320 
321 	/* Make sure VGA plane is off. it initializes to on after reset!*/
322 	PSB_WVDC32(0x80000000, VGACNTRL);
323 
324 	/* set the plls */
325 	PSB_WVDC32(p->fp0, MRST_FPA0);
326 	PSB_WVDC32(p->fp1, MRST_FPA1);
327 
328 	/* Actually enable it */
329 	PSB_WVDC32(p->dpll, MRST_DPLL_A);
330 	DRM_UDELAY(150);
331 
332 	/* Restore mode */
333 	PSB_WVDC32(p->htotal, HTOTAL_A);
334 	PSB_WVDC32(p->hblank, HBLANK_A);
335 	PSB_WVDC32(p->hsync, HSYNC_A);
336 	PSB_WVDC32(p->vtotal, VTOTAL_A);
337 	PSB_WVDC32(p->vblank, VBLANK_A);
338 	PSB_WVDC32(p->vsync, VSYNC_A);
339 	PSB_WVDC32(p->src, PIPEASRC);
340 	PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
341 
342 	/* Restore performance mode*/
343 	PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
344 
345 	/* Enable the pipe*/
346 	if (dev_priv->iLVDS_enable)
347 		PSB_WVDC32(p->conf, PIPEACONF);
348 
349 	/* Set up the plane*/
350 	PSB_WVDC32(p->linoff, DSPALINOFF);
351 	PSB_WVDC32(p->stride, DSPASTRIDE);
352 	PSB_WVDC32(p->tileoff, DSPATILEOFF);
353 
354 	/* Enable the plane */
355 	PSB_WVDC32(p->cntr, DSPACNTR);
356 	PSB_WVDC32(p->surf, DSPASURF);
357 
358 	/* Enable Cursor A */
359 	PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
360 	PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
361 	PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
362 
363 	/* Restore palette (gamma) */
364 	for (i = 0; i < 256; i++)
365 		PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2));
366 
367 	if (dev_priv->hdmi_priv)
368 		oaktrail_hdmi_restore(dev);
369 
370 	if (dev_priv->iLVDS_enable) {
371 		PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
372 		PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
373 		PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
374 		PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
375 		PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
376 		PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
377 		PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
378 		PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
379 		PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
380 		PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
381 	}
382 
383 	/* Wait for cycle delay */
384 	do {
385 		pp_stat = PSB_RVDC32(PP_STATUS);
386 	} while (pp_stat & 0x08000000);
387 
388 	/* Wait for panel power up */
389 	do {
390 		pp_stat = PSB_RVDC32(PP_STATUS);
391 	} while (pp_stat & 0x10000000);
392 
393 	/* Restore HW overlay */
394 	PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
395 	PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
396 	PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
397 	PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
398 	PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
399 	PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
400 	PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
401 
402 	/* DPST registers */
403 	PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
404 						HISTOGRAM_INT_CONTROL);
405 	PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
406 						HISTOGRAM_LOGIC_CONTROL);
407 	PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
408 
409 	return 0;
410 }
411 
412 /**
413  *	oaktrail_power_down	-	power down the display island
414  *	@dev: our DRM device
415  *
416  *	Power down the display interface of our device
417  */
oaktrail_power_down(struct drm_device * dev)418 static int oaktrail_power_down(struct drm_device *dev)
419 {
420 	struct drm_psb_private *dev_priv = dev->dev_private;
421 	u32 pwr_mask ;
422 	u32 pwr_sts;
423 
424 	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
425 	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
426 
427 	while (true) {
428 		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
429 		if ((pwr_sts & pwr_mask) == pwr_mask)
430 			break;
431 		else
432 			udelay(10);
433 	}
434 	return 0;
435 }
436 
437 /*
438  * oaktrail_power_up
439  *
440  * Restore power to the specified island(s) (powergating)
441  */
oaktrail_power_up(struct drm_device * dev)442 static int oaktrail_power_up(struct drm_device *dev)
443 {
444 	struct drm_psb_private *dev_priv = dev->dev_private;
445 	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
446 	u32 pwr_sts, pwr_cnt;
447 
448 	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
449 	pwr_cnt &= ~pwr_mask;
450 	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
451 
452 	while (true) {
453 		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
454 		if ((pwr_sts & pwr_mask) == 0)
455 			break;
456 		else
457 			udelay(10);
458 	}
459 	return 0;
460 }
461 
462 /* Oaktrail */
463 static const struct psb_offset oaktrail_regmap[2] = {
464 	{
465 		.fp0 = MRST_FPA0,
466 		.fp1 = MRST_FPA1,
467 		.cntr = DSPACNTR,
468 		.conf = PIPEACONF,
469 		.src = PIPEASRC,
470 		.dpll = MRST_DPLL_A,
471 		.htotal = HTOTAL_A,
472 		.hblank = HBLANK_A,
473 		.hsync = HSYNC_A,
474 		.vtotal = VTOTAL_A,
475 		.vblank = VBLANK_A,
476 		.vsync = VSYNC_A,
477 		.stride = DSPASTRIDE,
478 		.size = DSPASIZE,
479 		.pos = DSPAPOS,
480 		.surf = DSPASURF,
481 		.addr = MRST_DSPABASE,
482 		.base = MRST_DSPABASE,
483 		.status = PIPEASTAT,
484 		.linoff = DSPALINOFF,
485 		.tileoff = DSPATILEOFF,
486 		.palette = PALETTE_A,
487 	},
488 	{
489 		.fp0 = FPB0,
490 		.fp1 = FPB1,
491 		.cntr = DSPBCNTR,
492 		.conf = PIPEBCONF,
493 		.src = PIPEBSRC,
494 		.dpll = DPLL_B,
495 		.htotal = HTOTAL_B,
496 		.hblank = HBLANK_B,
497 		.hsync = HSYNC_B,
498 		.vtotal = VTOTAL_B,
499 		.vblank = VBLANK_B,
500 		.vsync = VSYNC_B,
501 		.stride = DSPBSTRIDE,
502 		.size = DSPBSIZE,
503 		.pos = DSPBPOS,
504 		.surf = DSPBSURF,
505 		.addr = DSPBBASE,
506 		.base = DSPBBASE,
507 		.status = PIPEBSTAT,
508 		.linoff = DSPBLINOFF,
509 		.tileoff = DSPBTILEOFF,
510 		.palette = PALETTE_B,
511 	},
512 };
513 
oaktrail_chip_setup(struct drm_device * dev)514 static int oaktrail_chip_setup(struct drm_device *dev)
515 {
516 	struct drm_psb_private *dev_priv = dev->dev_private;
517 	int ret;
518 
519 	if (pci_enable_msi(dev->pdev))
520 		dev_warn(dev->dev, "Enabling MSI failed!\n");
521 
522 	dev_priv->regmap = oaktrail_regmap;
523 
524 	ret = mid_chip_setup(dev);
525 	if (ret < 0)
526 		return ret;
527 	if (!dev_priv->has_gct) {
528 		/* Now pull the BIOS data */
529 		psb_intel_opregion_init(dev);
530 		psb_intel_init_bios(dev);
531 	}
532 	gma_intel_setup_gmbus(dev);
533 	oaktrail_hdmi_setup(dev);
534 	return 0;
535 }
536 
oaktrail_teardown(struct drm_device * dev)537 static void oaktrail_teardown(struct drm_device *dev)
538 {
539 	struct drm_psb_private *dev_priv = dev->dev_private;
540 
541 	gma_intel_teardown_gmbus(dev);
542 	oaktrail_hdmi_teardown(dev);
543 	if (!dev_priv->has_gct)
544 		psb_intel_destroy_bios(dev);
545 }
546 
547 const struct psb_ops oaktrail_chip_ops = {
548 	.name = "Oaktrail",
549 	.accel_2d = 1,
550 	.pipes = 2,
551 	.crtcs = 2,
552 	.hdmi_mask = (1 << 1),
553 	.lvds_mask = (1 << 0),
554 	.sdvo_mask = (1 << 1),
555 	.cursor_needs_phys = 0,
556 	.sgx_offset = MRST_SGX_OFFSET,
557 
558 	.chip_setup = oaktrail_chip_setup,
559 	.chip_teardown = oaktrail_teardown,
560 	.crtc_helper = &oaktrail_helper_funcs,
561 	.crtc_funcs = &psb_intel_crtc_funcs,
562 
563 	.output_init = oaktrail_output_init,
564 
565 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
566 	.backlight_init = oaktrail_backlight_init,
567 #endif
568 
569 	.save_regs = oaktrail_save_display_registers,
570 	.restore_regs = oaktrail_restore_display_registers,
571 	.save_crtc = gma_crtc_save,
572 	.restore_crtc = gma_crtc_restore,
573 	.power_down = oaktrail_power_down,
574 	.power_up = oaktrail_power_up,
575 
576 	.i2c_bus = 1,
577 };
578