• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * LCD panel driver for Sharp LS037V7DW01
3  *
4  * Copyright (C) 2013 Texas Instruments
5  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License version 2 as published by
9  * the Free Software Foundation.
10  */
11 
12 #include <linux/delay.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <linux/of.h>
16 #include <linux/platform_device.h>
17 #include <linux/slab.h>
18 #include <linux/regulator/consumer.h>
19 
20 #include "../dss/omapdss.h"
21 
22 struct panel_drv_data {
23 	struct omap_dss_device dssdev;
24 	struct omap_dss_device *in;
25 	struct regulator *vcc;
26 
27 	int data_lines;
28 
29 	struct omap_video_timings videomode;
30 
31 	struct gpio_desc *resb_gpio;	/* low = reset active min 20 us */
32 	struct gpio_desc *ini_gpio;	/* high = power on */
33 	struct gpio_desc *mo_gpio;	/* low = 480x640, high = 240x320 */
34 	struct gpio_desc *lr_gpio;	/* high = conventional horizontal scanning */
35 	struct gpio_desc *ud_gpio;	/* high = conventional vertical scanning */
36 };
37 
38 static const struct omap_video_timings sharp_ls_timings = {
39 	.x_res = 480,
40 	.y_res = 640,
41 
42 	.pixelclock	= 19200000,
43 
44 	.hsw		= 2,
45 	.hfp		= 1,
46 	.hbp		= 28,
47 
48 	.vsw		= 1,
49 	.vfp		= 1,
50 	.vbp		= 1,
51 
52 	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
53 	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
54 	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
55 	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
56 	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
57 };
58 
59 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
60 
sharp_ls_connect(struct omap_dss_device * dssdev)61 static int sharp_ls_connect(struct omap_dss_device *dssdev)
62 {
63 	struct panel_drv_data *ddata = to_panel_data(dssdev);
64 	struct omap_dss_device *in = ddata->in;
65 	int r;
66 
67 	if (omapdss_device_is_connected(dssdev))
68 		return 0;
69 
70 	r = in->ops.dpi->connect(in, dssdev);
71 	if (r)
72 		return r;
73 
74 	return 0;
75 }
76 
sharp_ls_disconnect(struct omap_dss_device * dssdev)77 static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
78 {
79 	struct panel_drv_data *ddata = to_panel_data(dssdev);
80 	struct omap_dss_device *in = ddata->in;
81 
82 	if (!omapdss_device_is_connected(dssdev))
83 		return;
84 
85 	in->ops.dpi->disconnect(in, dssdev);
86 }
87 
sharp_ls_enable(struct omap_dss_device * dssdev)88 static int sharp_ls_enable(struct omap_dss_device *dssdev)
89 {
90 	struct panel_drv_data *ddata = to_panel_data(dssdev);
91 	struct omap_dss_device *in = ddata->in;
92 	int r;
93 
94 	if (!omapdss_device_is_connected(dssdev))
95 		return -ENODEV;
96 
97 	if (omapdss_device_is_enabled(dssdev))
98 		return 0;
99 
100 	if (ddata->data_lines)
101 		in->ops.dpi->set_data_lines(in, ddata->data_lines);
102 	in->ops.dpi->set_timings(in, &ddata->videomode);
103 
104 	if (ddata->vcc) {
105 		r = regulator_enable(ddata->vcc);
106 		if (r != 0)
107 			return r;
108 	}
109 
110 	r = in->ops.dpi->enable(in);
111 	if (r) {
112 		regulator_disable(ddata->vcc);
113 		return r;
114 	}
115 
116 	/* wait couple of vsyncs until enabling the LCD */
117 	msleep(50);
118 
119 	if (ddata->resb_gpio)
120 		gpiod_set_value_cansleep(ddata->resb_gpio, 1);
121 
122 	if (ddata->ini_gpio)
123 		gpiod_set_value_cansleep(ddata->ini_gpio, 1);
124 
125 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
126 
127 	return 0;
128 }
129 
sharp_ls_disable(struct omap_dss_device * dssdev)130 static void sharp_ls_disable(struct omap_dss_device *dssdev)
131 {
132 	struct panel_drv_data *ddata = to_panel_data(dssdev);
133 	struct omap_dss_device *in = ddata->in;
134 
135 	if (!omapdss_device_is_enabled(dssdev))
136 		return;
137 
138 	if (ddata->ini_gpio)
139 		gpiod_set_value_cansleep(ddata->ini_gpio, 0);
140 
141 	if (ddata->resb_gpio)
142 		gpiod_set_value_cansleep(ddata->resb_gpio, 0);
143 
144 	/* wait at least 5 vsyncs after disabling the LCD */
145 
146 	msleep(100);
147 
148 	in->ops.dpi->disable(in);
149 
150 	if (ddata->vcc)
151 		regulator_disable(ddata->vcc);
152 
153 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
154 }
155 
sharp_ls_set_timings(struct omap_dss_device * dssdev,struct omap_video_timings * timings)156 static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
157 		struct omap_video_timings *timings)
158 {
159 	struct panel_drv_data *ddata = to_panel_data(dssdev);
160 	struct omap_dss_device *in = ddata->in;
161 
162 	ddata->videomode = *timings;
163 	dssdev->panel.timings = *timings;
164 
165 	in->ops.dpi->set_timings(in, timings);
166 }
167 
sharp_ls_get_timings(struct omap_dss_device * dssdev,struct omap_video_timings * timings)168 static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
169 		struct omap_video_timings *timings)
170 {
171 	struct panel_drv_data *ddata = to_panel_data(dssdev);
172 
173 	*timings = ddata->videomode;
174 }
175 
sharp_ls_check_timings(struct omap_dss_device * dssdev,struct omap_video_timings * timings)176 static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
177 		struct omap_video_timings *timings)
178 {
179 	struct panel_drv_data *ddata = to_panel_data(dssdev);
180 	struct omap_dss_device *in = ddata->in;
181 
182 	return in->ops.dpi->check_timings(in, timings);
183 }
184 
185 static struct omap_dss_driver sharp_ls_ops = {
186 	.connect	= sharp_ls_connect,
187 	.disconnect	= sharp_ls_disconnect,
188 
189 	.enable		= sharp_ls_enable,
190 	.disable	= sharp_ls_disable,
191 
192 	.set_timings	= sharp_ls_set_timings,
193 	.get_timings	= sharp_ls_get_timings,
194 	.check_timings	= sharp_ls_check_timings,
195 
196 	.get_resolution	= omapdss_default_get_resolution,
197 };
198 
sharp_ls_get_gpio_of(struct device * dev,int index,int val,const char * desc,struct gpio_desc ** gpiod)199 static  int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
200 	const char *desc, struct gpio_desc **gpiod)
201 {
202 	struct gpio_desc *gd;
203 
204 	*gpiod = NULL;
205 
206 	gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
207 	if (IS_ERR(gd))
208 		return PTR_ERR(gd);
209 
210 	*gpiod = gd;
211 	return 0;
212 }
213 
sharp_ls_probe_of(struct platform_device * pdev)214 static int sharp_ls_probe_of(struct platform_device *pdev)
215 {
216 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
217 	struct device_node *node = pdev->dev.of_node;
218 	struct omap_dss_device *in;
219 	int r;
220 
221 	ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
222 	if (IS_ERR(ddata->vcc)) {
223 		dev_err(&pdev->dev, "failed to get regulator\n");
224 		return PTR_ERR(ddata->vcc);
225 	}
226 
227 	/* lcd INI */
228 	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
229 	if (r)
230 		return r;
231 
232 	/* lcd RESB */
233 	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
234 	if (r)
235 		return r;
236 
237 	/* lcd MO */
238 	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
239 	if (r)
240 		return r;
241 
242 	/* lcd LR */
243 	r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
244 	if (r)
245 		return r;
246 
247 	/* lcd UD */
248 	r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
249 	if (r)
250 		return r;
251 
252 	in = omapdss_of_find_source_for_first_ep(node);
253 	if (IS_ERR(in)) {
254 		dev_err(&pdev->dev, "failed to find video source\n");
255 		return PTR_ERR(in);
256 	}
257 
258 	ddata->in = in;
259 
260 	return 0;
261 }
262 
sharp_ls_probe(struct platform_device * pdev)263 static int sharp_ls_probe(struct platform_device *pdev)
264 {
265 	struct panel_drv_data *ddata;
266 	struct omap_dss_device *dssdev;
267 	int r;
268 
269 	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
270 	if (ddata == NULL)
271 		return -ENOMEM;
272 
273 	platform_set_drvdata(pdev, ddata);
274 
275 	if (!pdev->dev.of_node)
276 		return -ENODEV;
277 
278 	r = sharp_ls_probe_of(pdev);
279 	if (r)
280 		return r;
281 
282 	ddata->videomode = sharp_ls_timings;
283 
284 	dssdev = &ddata->dssdev;
285 	dssdev->dev = &pdev->dev;
286 	dssdev->driver = &sharp_ls_ops;
287 	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
288 	dssdev->owner = THIS_MODULE;
289 	dssdev->panel.timings = ddata->videomode;
290 	dssdev->phy.dpi.data_lines = ddata->data_lines;
291 
292 	r = omapdss_register_display(dssdev);
293 	if (r) {
294 		dev_err(&pdev->dev, "Failed to register panel\n");
295 		goto err_reg;
296 	}
297 
298 	return 0;
299 
300 err_reg:
301 	omap_dss_put_device(ddata->in);
302 	return r;
303 }
304 
sharp_ls_remove(struct platform_device * pdev)305 static int __exit sharp_ls_remove(struct platform_device *pdev)
306 {
307 	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
308 	struct omap_dss_device *dssdev = &ddata->dssdev;
309 	struct omap_dss_device *in = ddata->in;
310 
311 	omapdss_unregister_display(dssdev);
312 
313 	sharp_ls_disable(dssdev);
314 	sharp_ls_disconnect(dssdev);
315 
316 	omap_dss_put_device(in);
317 
318 	return 0;
319 }
320 
321 static const struct of_device_id sharp_ls_of_match[] = {
322 	{ .compatible = "omapdss,sharp,ls037v7dw01", },
323 	{},
324 };
325 
326 MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
327 
328 static struct platform_driver sharp_ls_driver = {
329 	.probe = sharp_ls_probe,
330 	.remove = __exit_p(sharp_ls_remove),
331 	.driver = {
332 		.name = "panel-sharp-ls037v7dw01",
333 		.of_match_table = sharp_ls_of_match,
334 		.suppress_bind_attrs = true,
335 	},
336 };
337 
338 module_platform_driver(sharp_ls_driver);
339 
340 MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
341 MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
342 MODULE_LICENSE("GPL");
343