1 /*
2 * TI OMAP I2C master mode driver
3 *
4 * Copyright (C) 2003 MontaVista Software, Inc.
5 * Copyright (C) 2005 Nokia Corporation
6 * Copyright (C) 2004 - 2007 Texas Instruments.
7 *
8 * Originally written by MontaVista Software, Inc.
9 * Additional contributions by:
10 * Tony Lindgren <tony@atomide.com>
11 * Imre Deak <imre.deak@nokia.com>
12 * Juha Yrjölä <juha.yrjola@solidboot.com>
13 * Syed Khasim <x0khasim@ti.com>
14 * Nishant Menon <nm@ti.com>
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 */
26
27 #include <linux/module.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/err.h>
31 #include <linux/interrupt.h>
32 #include <linux/completion.h>
33 #include <linux/platform_device.h>
34 #include <linux/clk.h>
35 #include <linux/io.h>
36 #include <linux/of.h>
37 #include <linux/of_device.h>
38 #include <linux/slab.h>
39 #include <linux/i2c-omap.h>
40 #include <linux/pm_runtime.h>
41 #include <linux/pinctrl/consumer.h>
42
43 /* I2C controller revisions */
44 #define OMAP_I2C_OMAP1_REV_2 0x20
45
46 /* I2C controller revisions present on specific hardware */
47 #define OMAP_I2C_REV_ON_2430 0x00000036
48 #define OMAP_I2C_REV_ON_3430_3530 0x0000003C
49 #define OMAP_I2C_REV_ON_3630 0x00000040
50 #define OMAP_I2C_REV_ON_4430_PLUS 0x50400002
51
52 /* timeout waiting for the controller to respond */
53 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
54
55 /* timeout for pm runtime autosuspend */
56 #define OMAP_I2C_PM_TIMEOUT 1000 /* ms */
57
58 /* timeout for making decision on bus free status */
59 #define OMAP_I2C_BUS_FREE_TIMEOUT (msecs_to_jiffies(10))
60
61 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
62 enum {
63 OMAP_I2C_REV_REG = 0,
64 OMAP_I2C_IE_REG,
65 OMAP_I2C_STAT_REG,
66 OMAP_I2C_IV_REG,
67 OMAP_I2C_WE_REG,
68 OMAP_I2C_SYSS_REG,
69 OMAP_I2C_BUF_REG,
70 OMAP_I2C_CNT_REG,
71 OMAP_I2C_DATA_REG,
72 OMAP_I2C_SYSC_REG,
73 OMAP_I2C_CON_REG,
74 OMAP_I2C_OA_REG,
75 OMAP_I2C_SA_REG,
76 OMAP_I2C_PSC_REG,
77 OMAP_I2C_SCLL_REG,
78 OMAP_I2C_SCLH_REG,
79 OMAP_I2C_SYSTEST_REG,
80 OMAP_I2C_BUFSTAT_REG,
81 /* only on OMAP4430 */
82 OMAP_I2C_IP_V2_REVNB_LO,
83 OMAP_I2C_IP_V2_REVNB_HI,
84 OMAP_I2C_IP_V2_IRQSTATUS_RAW,
85 OMAP_I2C_IP_V2_IRQENABLE_SET,
86 OMAP_I2C_IP_V2_IRQENABLE_CLR,
87 };
88
89 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
90 #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */
91 #define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */
92 #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */
93 #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */
94 #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */
95 #define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */
96 #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */
97
98 /* I2C Status Register (OMAP_I2C_STAT): */
99 #define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */
100 #define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */
101 #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */
102 #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */
103 #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
104 #define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */
105 #define OMAP_I2C_STAT_BF (1 << 8) /* Bus Free */
106 #define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
107 #define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */
108 #define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */
109 #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */
110 #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */
111
112 /* I2C WE wakeup enable register */
113 #define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */
114 #define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */
115 #define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/
116 #define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */
117 #define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */
118 #define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */
119 #define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */
120 #define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */
121 #define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */
122 #define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */
123
124 #define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
125 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
126 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
127 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
128 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
129
130 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
131 #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */
132 #define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */
133 #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */
134 #define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */
135
136 /* I2C Configuration Register (OMAP_I2C_CON): */
137 #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */
138 #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */
139 #define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */
140 #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */
141 #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */
142 #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */
143 #define OMAP_I2C_CON_XA (1 << 8) /* Expand address */
144 #define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */
145 #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */
146 #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */
147
148 /* I2C SCL time value when Master */
149 #define OMAP_I2C_SCLL_HSSCLL 8
150 #define OMAP_I2C_SCLH_HSSCLH 8
151
152 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
153 #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
154 #define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */
155 #define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
156 #define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
157 /* Functional mode */
158 #define OMAP_I2C_SYSTEST_SCL_I_FUNC (1 << 8) /* SCL line input value */
159 #define OMAP_I2C_SYSTEST_SCL_O_FUNC (1 << 7) /* SCL line output value */
160 #define OMAP_I2C_SYSTEST_SDA_I_FUNC (1 << 6) /* SDA line input value */
161 #define OMAP_I2C_SYSTEST_SDA_O_FUNC (1 << 5) /* SDA line output value */
162 /* SDA/SCL IO mode */
163 #define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */
164 #define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */
165 #define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */
166 #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */
167
168 /* OCP_SYSSTATUS bit definitions */
169 #define SYSS_RESETDONE_MASK (1 << 0)
170
171 /* OCP_SYSCONFIG bit definitions */
172 #define SYSC_CLOCKACTIVITY_MASK (0x3 << 8)
173 #define SYSC_SIDLEMODE_MASK (0x3 << 3)
174 #define SYSC_ENAWAKEUP_MASK (1 << 2)
175 #define SYSC_SOFTRESET_MASK (1 << 1)
176 #define SYSC_AUTOIDLE_MASK (1 << 0)
177
178 #define SYSC_IDLEMODE_SMART 0x2
179 #define SYSC_CLOCKACTIVITY_FCLK 0x2
180
181 /* Errata definitions */
182 #define I2C_OMAP_ERRATA_I207 (1 << 0)
183 #define I2C_OMAP_ERRATA_I462 (1 << 1)
184
185 #define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF
186
187 struct omap_i2c_dev {
188 struct device *dev;
189 void __iomem *base; /* virtual */
190 int irq;
191 int reg_shift; /* bit shift for I2C register addresses */
192 struct completion cmd_complete;
193 struct resource *ioarea;
194 u32 latency; /* maximum mpu wkup latency */
195 void (*set_mpu_wkup_lat)(struct device *dev,
196 long latency);
197 u32 speed; /* Speed of bus in kHz */
198 u32 flags;
199 u16 scheme;
200 u16 cmd_err;
201 u8 *buf;
202 u8 *regs;
203 size_t buf_len;
204 struct i2c_adapter adapter;
205 u8 threshold;
206 u8 fifo_size; /* use as flag and value
207 * fifo_size==0 implies no fifo
208 * if set, should be trsh+1
209 */
210 u32 rev;
211 unsigned b_hw:1; /* bad h/w fixes */
212 unsigned bb_valid:1; /* true when BB-bit reflects
213 * the I2C bus state
214 */
215 unsigned receiver:1; /* true when we're in receiver mode */
216 u16 iestate; /* Saved interrupt register */
217 u16 pscstate;
218 u16 scllstate;
219 u16 sclhstate;
220 u16 syscstate;
221 u16 westate;
222 u16 errata;
223 };
224
225 static const u8 reg_map_ip_v1[] = {
226 [OMAP_I2C_REV_REG] = 0x00,
227 [OMAP_I2C_IE_REG] = 0x01,
228 [OMAP_I2C_STAT_REG] = 0x02,
229 [OMAP_I2C_IV_REG] = 0x03,
230 [OMAP_I2C_WE_REG] = 0x03,
231 [OMAP_I2C_SYSS_REG] = 0x04,
232 [OMAP_I2C_BUF_REG] = 0x05,
233 [OMAP_I2C_CNT_REG] = 0x06,
234 [OMAP_I2C_DATA_REG] = 0x07,
235 [OMAP_I2C_SYSC_REG] = 0x08,
236 [OMAP_I2C_CON_REG] = 0x09,
237 [OMAP_I2C_OA_REG] = 0x0a,
238 [OMAP_I2C_SA_REG] = 0x0b,
239 [OMAP_I2C_PSC_REG] = 0x0c,
240 [OMAP_I2C_SCLL_REG] = 0x0d,
241 [OMAP_I2C_SCLH_REG] = 0x0e,
242 [OMAP_I2C_SYSTEST_REG] = 0x0f,
243 [OMAP_I2C_BUFSTAT_REG] = 0x10,
244 };
245
246 static const u8 reg_map_ip_v2[] = {
247 [OMAP_I2C_REV_REG] = 0x04,
248 [OMAP_I2C_IE_REG] = 0x2c,
249 [OMAP_I2C_STAT_REG] = 0x28,
250 [OMAP_I2C_IV_REG] = 0x34,
251 [OMAP_I2C_WE_REG] = 0x34,
252 [OMAP_I2C_SYSS_REG] = 0x90,
253 [OMAP_I2C_BUF_REG] = 0x94,
254 [OMAP_I2C_CNT_REG] = 0x98,
255 [OMAP_I2C_DATA_REG] = 0x9c,
256 [OMAP_I2C_SYSC_REG] = 0x10,
257 [OMAP_I2C_CON_REG] = 0xa4,
258 [OMAP_I2C_OA_REG] = 0xa8,
259 [OMAP_I2C_SA_REG] = 0xac,
260 [OMAP_I2C_PSC_REG] = 0xb0,
261 [OMAP_I2C_SCLL_REG] = 0xb4,
262 [OMAP_I2C_SCLH_REG] = 0xb8,
263 [OMAP_I2C_SYSTEST_REG] = 0xbC,
264 [OMAP_I2C_BUFSTAT_REG] = 0xc0,
265 [OMAP_I2C_IP_V2_REVNB_LO] = 0x00,
266 [OMAP_I2C_IP_V2_REVNB_HI] = 0x04,
267 [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24,
268 [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c,
269 [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30,
270 };
271
omap_i2c_write_reg(struct omap_i2c_dev * omap,int reg,u16 val)272 static inline void omap_i2c_write_reg(struct omap_i2c_dev *omap,
273 int reg, u16 val)
274 {
275 writew_relaxed(val, omap->base +
276 (omap->regs[reg] << omap->reg_shift));
277 }
278
omap_i2c_read_reg(struct omap_i2c_dev * omap,int reg)279 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg)
280 {
281 return readw_relaxed(omap->base +
282 (omap->regs[reg] << omap->reg_shift));
283 }
284
__omap_i2c_init(struct omap_i2c_dev * omap)285 static void __omap_i2c_init(struct omap_i2c_dev *omap)
286 {
287
288 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
289
290 /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
291 omap_i2c_write_reg(omap, OMAP_I2C_PSC_REG, omap->pscstate);
292
293 /* SCL low and high time values */
294 omap_i2c_write_reg(omap, OMAP_I2C_SCLL_REG, omap->scllstate);
295 omap_i2c_write_reg(omap, OMAP_I2C_SCLH_REG, omap->sclhstate);
296 if (omap->rev >= OMAP_I2C_REV_ON_3430_3530)
297 omap_i2c_write_reg(omap, OMAP_I2C_WE_REG, omap->westate);
298
299 /* Take the I2C module out of reset: */
300 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
301
302 /*
303 * NOTE: right after setting CON_EN, STAT_BB could be 0 while the
304 * bus is busy. It will be changed to 1 on the next IP FCLK clock.
305 * udelay(1) will be enough to fix that.
306 */
307
308 /*
309 * Don't write to this register if the IE state is 0 as it can
310 * cause deadlock.
311 */
312 if (omap->iestate)
313 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate);
314 }
315
omap_i2c_reset(struct omap_i2c_dev * omap)316 static int omap_i2c_reset(struct omap_i2c_dev *omap)
317 {
318 unsigned long timeout;
319 u16 sysc;
320
321 if (omap->rev >= OMAP_I2C_OMAP1_REV_2) {
322 sysc = omap_i2c_read_reg(omap, OMAP_I2C_SYSC_REG);
323
324 /* Disable I2C controller before soft reset */
325 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG,
326 omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) &
327 ~(OMAP_I2C_CON_EN));
328
329 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
330 /* For some reason we need to set the EN bit before the
331 * reset done bit gets set. */
332 timeout = jiffies + OMAP_I2C_TIMEOUT;
333 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
334 while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) &
335 SYSS_RESETDONE_MASK)) {
336 if (time_after(jiffies, timeout)) {
337 dev_warn(omap->dev, "timeout waiting "
338 "for controller reset\n");
339 return -ETIMEDOUT;
340 }
341 msleep(1);
342 }
343
344 /* SYSC register is cleared by the reset; rewrite it */
345 omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, sysc);
346
347 if (omap->rev > OMAP_I2C_REV_ON_3430_3530) {
348 /* Schedule I2C-bus monitoring on the next transfer */
349 omap->bb_valid = 0;
350 }
351 }
352
353 return 0;
354 }
355
omap_i2c_init(struct omap_i2c_dev * omap)356 static int omap_i2c_init(struct omap_i2c_dev *omap)
357 {
358 u16 psc = 0, scll = 0, sclh = 0;
359 u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
360 unsigned long fclk_rate = 12000000;
361 unsigned long internal_clk = 0;
362 struct clk *fclk;
363
364 if (omap->rev >= OMAP_I2C_REV_ON_3430_3530) {
365 /*
366 * Enabling all wakup sources to stop I2C freezing on
367 * WFI instruction.
368 * REVISIT: Some wkup sources might not be needed.
369 */
370 omap->westate = OMAP_I2C_WE_ALL;
371 }
372
373 if (omap->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
374 /*
375 * The I2C functional clock is the armxor_ck, so there's
376 * no need to get "armxor_ck" separately. Now, if OMAP2420
377 * always returns 12MHz for the functional clock, we can
378 * do this bit unconditionally.
379 */
380 fclk = clk_get(omap->dev, "fck");
381 fclk_rate = clk_get_rate(fclk);
382 clk_put(fclk);
383
384 /* TRM for 5912 says the I2C clock must be prescaled to be
385 * between 7 - 12 MHz. The XOR input clock is typically
386 * 12, 13 or 19.2 MHz. So we should have code that produces:
387 *
388 * XOR MHz Divider Prescaler
389 * 12 1 0
390 * 13 2 1
391 * 19.2 2 1
392 */
393 if (fclk_rate > 12000000)
394 psc = fclk_rate / 12000000;
395 }
396
397 if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
398
399 /*
400 * HSI2C controller internal clk rate should be 19.2 Mhz for
401 * HS and for all modes on 2430. On 34xx we can use lower rate
402 * to get longer filter period for better noise suppression.
403 * The filter is iclk (fclk for HS) period.
404 */
405 if (omap->speed > 400 ||
406 omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
407 internal_clk = 19200;
408 else if (omap->speed > 100)
409 internal_clk = 9600;
410 else
411 internal_clk = 4000;
412 fclk = clk_get(omap->dev, "fck");
413 fclk_rate = clk_get_rate(fclk) / 1000;
414 clk_put(fclk);
415
416 /* Compute prescaler divisor */
417 psc = fclk_rate / internal_clk;
418 psc = psc - 1;
419
420 /* If configured for High Speed */
421 if (omap->speed > 400) {
422 unsigned long scl;
423
424 /* For first phase of HS mode */
425 scl = internal_clk / 400;
426 fsscll = scl - (scl / 3) - 7;
427 fssclh = (scl / 3) - 5;
428
429 /* For second phase of HS mode */
430 scl = fclk_rate / omap->speed;
431 hsscll = scl - (scl / 3) - 7;
432 hssclh = (scl / 3) - 5;
433 } else if (omap->speed > 100) {
434 unsigned long scl;
435
436 /* Fast mode */
437 scl = internal_clk / omap->speed;
438 fsscll = scl - (scl / 3) - 7;
439 fssclh = (scl / 3) - 5;
440 } else {
441 /* Standard mode */
442 fsscll = internal_clk / (omap->speed * 2) - 7;
443 fssclh = internal_clk / (omap->speed * 2) - 5;
444 }
445 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
446 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
447 } else {
448 /* Program desired operating rate */
449 fclk_rate /= (psc + 1) * 1000;
450 if (psc > 2)
451 psc = 2;
452 scll = fclk_rate / (omap->speed * 2) - 7 + psc;
453 sclh = fclk_rate / (omap->speed * 2) - 7 + psc;
454 }
455
456 omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
457 OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
458 OMAP_I2C_IE_AL) | ((omap->fifo_size) ?
459 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
460
461 omap->pscstate = psc;
462 omap->scllstate = scll;
463 omap->sclhstate = sclh;
464
465 if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) {
466 /* Not implemented */
467 omap->bb_valid = 1;
468 }
469
470 __omap_i2c_init(omap);
471
472 return 0;
473 }
474
475 /*
476 * Waiting on Bus Busy
477 */
omap_i2c_wait_for_bb(struct omap_i2c_dev * omap)478 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *omap)
479 {
480 unsigned long timeout;
481
482 timeout = jiffies + OMAP_I2C_TIMEOUT;
483 while (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
484 if (time_after(jiffies, timeout))
485 return i2c_recover_bus(&omap->adapter);
486 msleep(1);
487 }
488
489 return 0;
490 }
491
492 /*
493 * Wait while BB-bit doesn't reflect the I2C bus state
494 *
495 * In a multimaster environment, after IP software reset, BB-bit value doesn't
496 * correspond to the current bus state. It may happen what BB-bit will be 0,
497 * while the bus is busy due to another I2C master activity.
498 * Here are BB-bit values after reset:
499 * SDA SCL BB NOTES
500 * 0 0 0 1, 2
501 * 1 0 0 1, 2
502 * 0 1 1
503 * 1 1 0 3
504 * Later, if IP detect SDA=0 and SCL=1 (ACK) or SDA 1->0 while SCL=1 (START)
505 * combinations on the bus, it set BB-bit to 1.
506 * If IP detect SDA 0->1 while SCL=1 (STOP) combination on the bus,
507 * it set BB-bit to 0 and BF to 1.
508 * BB and BF bits correctly tracks the bus state while IP is suspended
509 * BB bit became valid on the next FCLK clock after CON_EN bit set
510 *
511 * NOTES:
512 * 1. Any transfer started when BB=0 and bus is busy wouldn't be
513 * completed by IP and results in controller timeout.
514 * 2. Any transfer started when BB=0 and SCL=0 results in IP
515 * starting to drive SDA low. In that case IP corrupt data
516 * on the bus.
517 * 3. Any transfer started in the middle of another master's transfer
518 * results in unpredictable results and data corruption
519 */
omap_i2c_wait_for_bb_valid(struct omap_i2c_dev * omap)520 static int omap_i2c_wait_for_bb_valid(struct omap_i2c_dev *omap)
521 {
522 unsigned long bus_free_timeout = 0;
523 unsigned long timeout;
524 int bus_free = 0;
525 u16 stat, systest;
526
527 if (omap->bb_valid)
528 return 0;
529
530 timeout = jiffies + OMAP_I2C_TIMEOUT;
531 while (1) {
532 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
533 /*
534 * We will see BB or BF event in a case IP had detected any
535 * activity on the I2C bus. Now IP correctly tracks the bus
536 * state. BB-bit value is valid.
537 */
538 if (stat & (OMAP_I2C_STAT_BB | OMAP_I2C_STAT_BF))
539 break;
540
541 /*
542 * Otherwise, we must look signals on the bus to make
543 * the right decision.
544 */
545 systest = omap_i2c_read_reg(omap, OMAP_I2C_SYSTEST_REG);
546 if ((systest & OMAP_I2C_SYSTEST_SCL_I_FUNC) &&
547 (systest & OMAP_I2C_SYSTEST_SDA_I_FUNC)) {
548 if (!bus_free) {
549 bus_free_timeout = jiffies +
550 OMAP_I2C_BUS_FREE_TIMEOUT;
551 bus_free = 1;
552 }
553
554 /*
555 * SDA and SCL lines was high for 10 ms without bus
556 * activity detected. The bus is free. Consider
557 * BB-bit value is valid.
558 */
559 if (time_after(jiffies, bus_free_timeout))
560 break;
561 } else {
562 bus_free = 0;
563 }
564
565 if (time_after(jiffies, timeout)) {
566 dev_warn(omap->dev, "timeout waiting for bus ready\n");
567 return -ETIMEDOUT;
568 }
569
570 msleep(1);
571 }
572
573 omap->bb_valid = 1;
574 return 0;
575 }
576
omap_i2c_resize_fifo(struct omap_i2c_dev * omap,u8 size,bool is_rx)577 static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx)
578 {
579 u16 buf;
580
581 if (omap->flags & OMAP_I2C_FLAG_NO_FIFO)
582 return;
583
584 /*
585 * Set up notification threshold based on message size. We're doing
586 * this to try and avoid draining feature as much as possible. Whenever
587 * we have big messages to transfer (bigger than our total fifo size)
588 * then we might use draining feature to transfer the remaining bytes.
589 */
590
591 omap->threshold = clamp(size, (u8) 1, omap->fifo_size);
592
593 buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
594
595 if (is_rx) {
596 /* Clear RX Threshold */
597 buf &= ~(0x3f << 8);
598 buf |= ((omap->threshold - 1) << 8) | OMAP_I2C_BUF_RXFIF_CLR;
599 } else {
600 /* Clear TX Threshold */
601 buf &= ~0x3f;
602 buf |= (omap->threshold - 1) | OMAP_I2C_BUF_TXFIF_CLR;
603 }
604
605 omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, buf);
606
607 if (omap->rev < OMAP_I2C_REV_ON_3630)
608 omap->b_hw = 1; /* Enable hardware fixes */
609
610 /* calculate wakeup latency constraint for MPU */
611 if (omap->set_mpu_wkup_lat != NULL)
612 omap->latency = (1000000 * omap->threshold) /
613 (1000 * omap->speed / 8);
614 }
615
616 /*
617 * Low level master read/write transaction.
618 */
omap_i2c_xfer_msg(struct i2c_adapter * adap,struct i2c_msg * msg,int stop)619 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
620 struct i2c_msg *msg, int stop)
621 {
622 struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
623 unsigned long timeout;
624 u16 w;
625
626 dev_dbg(omap->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
627 msg->addr, msg->len, msg->flags, stop);
628
629 if (msg->len == 0)
630 return -EINVAL;
631
632 omap->receiver = !!(msg->flags & I2C_M_RD);
633 omap_i2c_resize_fifo(omap, msg->len, omap->receiver);
634
635 omap_i2c_write_reg(omap, OMAP_I2C_SA_REG, msg->addr);
636
637 /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
638 omap->buf = msg->buf;
639 omap->buf_len = msg->len;
640
641 /* make sure writes to omap->buf_len are ordered */
642 barrier();
643
644 omap_i2c_write_reg(omap, OMAP_I2C_CNT_REG, omap->buf_len);
645
646 /* Clear the FIFO Buffers */
647 w = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG);
648 w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
649 omap_i2c_write_reg(omap, OMAP_I2C_BUF_REG, w);
650
651 reinit_completion(&omap->cmd_complete);
652 omap->cmd_err = 0;
653
654 w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
655
656 /* High speed configuration */
657 if (omap->speed > 400)
658 w |= OMAP_I2C_CON_OPMODE_HS;
659
660 if (msg->flags & I2C_M_STOP)
661 stop = 1;
662 if (msg->flags & I2C_M_TEN)
663 w |= OMAP_I2C_CON_XA;
664 if (!(msg->flags & I2C_M_RD))
665 w |= OMAP_I2C_CON_TRX;
666
667 if (!omap->b_hw && stop)
668 w |= OMAP_I2C_CON_STP;
669 /*
670 * NOTE: STAT_BB bit could became 1 here if another master occupy
671 * the bus. IP successfully complete transfer when the bus will be
672 * free again (BB reset to 0).
673 */
674 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
675
676 /*
677 * Don't write stt and stp together on some hardware.
678 */
679 if (omap->b_hw && stop) {
680 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
681 u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
682 while (con & OMAP_I2C_CON_STT) {
683 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
684
685 /* Let the user know if i2c is in a bad state */
686 if (time_after(jiffies, delay)) {
687 dev_err(omap->dev, "controller timed out "
688 "waiting for start condition to finish\n");
689 return -ETIMEDOUT;
690 }
691 cpu_relax();
692 }
693
694 w |= OMAP_I2C_CON_STP;
695 w &= ~OMAP_I2C_CON_STT;
696 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
697 }
698
699 /*
700 * REVISIT: We should abort the transfer on signals, but the bus goes
701 * into arbitration and we're currently unable to recover from it.
702 */
703 timeout = wait_for_completion_timeout(&omap->cmd_complete,
704 OMAP_I2C_TIMEOUT);
705 if (timeout == 0) {
706 dev_err(omap->dev, "controller timed out\n");
707 omap_i2c_reset(omap);
708 __omap_i2c_init(omap);
709 return -ETIMEDOUT;
710 }
711
712 if (likely(!omap->cmd_err))
713 return 0;
714
715 /* We have an error */
716 if (omap->cmd_err & (OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)) {
717 omap_i2c_reset(omap);
718 __omap_i2c_init(omap);
719 return -EIO;
720 }
721
722 if (omap->cmd_err & OMAP_I2C_STAT_AL)
723 return -EAGAIN;
724
725 if (omap->cmd_err & OMAP_I2C_STAT_NACK) {
726 if (msg->flags & I2C_M_IGNORE_NAK)
727 return 0;
728
729 w = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG);
730 w |= OMAP_I2C_CON_STP;
731 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, w);
732 return -EREMOTEIO;
733 }
734 return -EIO;
735 }
736
737
738 /*
739 * Prepare controller for a transaction and call omap_i2c_xfer_msg
740 * to do the work during IRQ processing.
741 */
742 static int
omap_i2c_xfer(struct i2c_adapter * adap,struct i2c_msg msgs[],int num)743 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
744 {
745 struct omap_i2c_dev *omap = i2c_get_adapdata(adap);
746 int i;
747 int r;
748
749 r = pm_runtime_get_sync(omap->dev);
750 if (r < 0)
751 goto out;
752
753 r = omap_i2c_wait_for_bb_valid(omap);
754 if (r < 0)
755 goto out;
756
757 r = omap_i2c_wait_for_bb(omap);
758 if (r < 0)
759 goto out;
760
761 if (omap->set_mpu_wkup_lat != NULL)
762 omap->set_mpu_wkup_lat(omap->dev, omap->latency);
763
764 for (i = 0; i < num; i++) {
765 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
766 if (r != 0)
767 break;
768 }
769
770 if (r == 0)
771 r = num;
772
773 omap_i2c_wait_for_bb(omap);
774
775 if (omap->set_mpu_wkup_lat != NULL)
776 omap->set_mpu_wkup_lat(omap->dev, -1);
777
778 out:
779 pm_runtime_mark_last_busy(omap->dev);
780 pm_runtime_put_autosuspend(omap->dev);
781 return r;
782 }
783
784 static u32
omap_i2c_func(struct i2c_adapter * adap)785 omap_i2c_func(struct i2c_adapter *adap)
786 {
787 return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
788 I2C_FUNC_PROTOCOL_MANGLING;
789 }
790
791 static inline void
omap_i2c_complete_cmd(struct omap_i2c_dev * omap,u16 err)792 omap_i2c_complete_cmd(struct omap_i2c_dev *omap, u16 err)
793 {
794 omap->cmd_err |= err;
795 complete(&omap->cmd_complete);
796 }
797
798 static inline void
omap_i2c_ack_stat(struct omap_i2c_dev * omap,u16 stat)799 omap_i2c_ack_stat(struct omap_i2c_dev *omap, u16 stat)
800 {
801 omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, stat);
802 }
803
i2c_omap_errata_i207(struct omap_i2c_dev * omap,u16 stat)804 static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat)
805 {
806 /*
807 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
808 * Not applicable for OMAP4.
809 * Under certain rare conditions, RDR could be set again
810 * when the bus is busy, then ignore the interrupt and
811 * clear the interrupt.
812 */
813 if (stat & OMAP_I2C_STAT_RDR) {
814 /* Step 1: If RDR is set, clear it */
815 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
816
817 /* Step 2: */
818 if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
819 & OMAP_I2C_STAT_BB)) {
820
821 /* Step 3: */
822 if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG)
823 & OMAP_I2C_STAT_RDR) {
824 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
825 dev_dbg(omap->dev, "RDR when bus is busy.\n");
826 }
827
828 }
829 }
830 }
831
832 /* rev1 devices are apparently only on some 15xx */
833 #ifdef CONFIG_ARCH_OMAP15XX
834
835 static irqreturn_t
omap_i2c_omap1_isr(int this_irq,void * dev_id)836 omap_i2c_omap1_isr(int this_irq, void *dev_id)
837 {
838 struct omap_i2c_dev *omap = dev_id;
839 u16 iv, w;
840
841 if (pm_runtime_suspended(omap->dev))
842 return IRQ_NONE;
843
844 iv = omap_i2c_read_reg(omap, OMAP_I2C_IV_REG);
845 switch (iv) {
846 case 0x00: /* None */
847 break;
848 case 0x01: /* Arbitration lost */
849 dev_err(omap->dev, "Arbitration lost\n");
850 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL);
851 break;
852 case 0x02: /* No acknowledgement */
853 omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK);
854 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
855 break;
856 case 0x03: /* Register access ready */
857 omap_i2c_complete_cmd(omap, 0);
858 break;
859 case 0x04: /* Receive data ready */
860 if (omap->buf_len) {
861 w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
862 *omap->buf++ = w;
863 omap->buf_len--;
864 if (omap->buf_len) {
865 *omap->buf++ = w >> 8;
866 omap->buf_len--;
867 }
868 } else
869 dev_err(omap->dev, "RRDY IRQ while no data requested\n");
870 break;
871 case 0x05: /* Transmit data ready */
872 if (omap->buf_len) {
873 w = *omap->buf++;
874 omap->buf_len--;
875 if (omap->buf_len) {
876 w |= *omap->buf++ << 8;
877 omap->buf_len--;
878 }
879 omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
880 } else
881 dev_err(omap->dev, "XRDY IRQ while no data to send\n");
882 break;
883 default:
884 return IRQ_NONE;
885 }
886
887 return IRQ_HANDLED;
888 }
889 #else
890 #define omap_i2c_omap1_isr NULL
891 #endif
892
893 /*
894 * OMAP3430 Errata i462: When an XRDY/XDR is hit, wait for XUDF before writing
895 * data to DATA_REG. Otherwise some data bytes can be lost while transferring
896 * them from the memory to the I2C interface.
897 */
errata_omap3_i462(struct omap_i2c_dev * omap)898 static int errata_omap3_i462(struct omap_i2c_dev *omap)
899 {
900 unsigned long timeout = 10000;
901 u16 stat;
902
903 do {
904 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
905 if (stat & OMAP_I2C_STAT_XUDF)
906 break;
907
908 if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
909 omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_XRDY |
910 OMAP_I2C_STAT_XDR));
911 if (stat & OMAP_I2C_STAT_NACK) {
912 omap->cmd_err |= OMAP_I2C_STAT_NACK;
913 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
914 }
915
916 if (stat & OMAP_I2C_STAT_AL) {
917 dev_err(omap->dev, "Arbitration lost\n");
918 omap->cmd_err |= OMAP_I2C_STAT_AL;
919 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
920 }
921
922 return -EIO;
923 }
924
925 cpu_relax();
926 } while (--timeout);
927
928 if (!timeout) {
929 dev_err(omap->dev, "timeout waiting on XUDF bit\n");
930 return 0;
931 }
932
933 return 0;
934 }
935
omap_i2c_receive_data(struct omap_i2c_dev * omap,u8 num_bytes,bool is_rdr)936 static void omap_i2c_receive_data(struct omap_i2c_dev *omap, u8 num_bytes,
937 bool is_rdr)
938 {
939 u16 w;
940
941 while (num_bytes--) {
942 w = omap_i2c_read_reg(omap, OMAP_I2C_DATA_REG);
943 *omap->buf++ = w;
944 omap->buf_len--;
945
946 /*
947 * Data reg in 2430, omap3 and
948 * omap4 is 8 bit wide
949 */
950 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
951 *omap->buf++ = w >> 8;
952 omap->buf_len--;
953 }
954 }
955 }
956
omap_i2c_transmit_data(struct omap_i2c_dev * omap,u8 num_bytes,bool is_xdr)957 static int omap_i2c_transmit_data(struct omap_i2c_dev *omap, u8 num_bytes,
958 bool is_xdr)
959 {
960 u16 w;
961
962 while (num_bytes--) {
963 w = *omap->buf++;
964 omap->buf_len--;
965
966 /*
967 * Data reg in 2430, omap3 and
968 * omap4 is 8 bit wide
969 */
970 if (omap->flags & OMAP_I2C_FLAG_16BIT_DATA_REG) {
971 w |= *omap->buf++ << 8;
972 omap->buf_len--;
973 }
974
975 if (omap->errata & I2C_OMAP_ERRATA_I462) {
976 int ret;
977
978 ret = errata_omap3_i462(omap);
979 if (ret < 0)
980 return ret;
981 }
982
983 omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w);
984 }
985
986 return 0;
987 }
988
989 static irqreturn_t
omap_i2c_isr(int irq,void * dev_id)990 omap_i2c_isr(int irq, void *dev_id)
991 {
992 struct omap_i2c_dev *omap = dev_id;
993 irqreturn_t ret = IRQ_HANDLED;
994 u16 mask;
995 u16 stat;
996
997 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
998 mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
999
1000 if (stat & mask)
1001 ret = IRQ_WAKE_THREAD;
1002
1003 return ret;
1004 }
1005
1006 static irqreturn_t
omap_i2c_isr_thread(int this_irq,void * dev_id)1007 omap_i2c_isr_thread(int this_irq, void *dev_id)
1008 {
1009 struct omap_i2c_dev *omap = dev_id;
1010 u16 bits;
1011 u16 stat;
1012 int err = 0, count = 0;
1013
1014 do {
1015 bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
1016 stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
1017 stat &= bits;
1018
1019 /* If we're in receiver mode, ignore XDR/XRDY */
1020 if (omap->receiver)
1021 stat &= ~(OMAP_I2C_STAT_XDR | OMAP_I2C_STAT_XRDY);
1022 else
1023 stat &= ~(OMAP_I2C_STAT_RDR | OMAP_I2C_STAT_RRDY);
1024
1025 if (!stat) {
1026 /* my work here is done */
1027 goto out;
1028 }
1029
1030 dev_dbg(omap->dev, "IRQ (ISR = 0x%04x)\n", stat);
1031 if (count++ == 100) {
1032 dev_warn(omap->dev, "Too much work in one IRQ\n");
1033 break;
1034 }
1035
1036 if (stat & OMAP_I2C_STAT_NACK) {
1037 err |= OMAP_I2C_STAT_NACK;
1038 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_NACK);
1039 }
1040
1041 if (stat & OMAP_I2C_STAT_AL) {
1042 dev_err(omap->dev, "Arbitration lost\n");
1043 err |= OMAP_I2C_STAT_AL;
1044 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AL);
1045 }
1046
1047 /*
1048 * ProDB0017052: Clear ARDY bit twice
1049 */
1050 if (stat & OMAP_I2C_STAT_ARDY)
1051 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ARDY);
1052
1053 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
1054 OMAP_I2C_STAT_AL)) {
1055 omap_i2c_ack_stat(omap, (OMAP_I2C_STAT_RRDY |
1056 OMAP_I2C_STAT_RDR |
1057 OMAP_I2C_STAT_XRDY |
1058 OMAP_I2C_STAT_XDR |
1059 OMAP_I2C_STAT_ARDY));
1060 break;
1061 }
1062
1063 if (stat & OMAP_I2C_STAT_RDR) {
1064 u8 num_bytes = 1;
1065
1066 if (omap->fifo_size)
1067 num_bytes = omap->buf_len;
1068
1069 if (omap->errata & I2C_OMAP_ERRATA_I207) {
1070 i2c_omap_errata_i207(omap, stat);
1071 num_bytes = (omap_i2c_read_reg(omap,
1072 OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
1073 }
1074
1075 omap_i2c_receive_data(omap, num_bytes, true);
1076 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR);
1077 continue;
1078 }
1079
1080 if (stat & OMAP_I2C_STAT_RRDY) {
1081 u8 num_bytes = 1;
1082
1083 if (omap->threshold)
1084 num_bytes = omap->threshold;
1085
1086 omap_i2c_receive_data(omap, num_bytes, false);
1087 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RRDY);
1088 continue;
1089 }
1090
1091 if (stat & OMAP_I2C_STAT_XDR) {
1092 u8 num_bytes = 1;
1093 int ret;
1094
1095 if (omap->fifo_size)
1096 num_bytes = omap->buf_len;
1097
1098 ret = omap_i2c_transmit_data(omap, num_bytes, true);
1099 if (ret < 0)
1100 break;
1101
1102 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XDR);
1103 continue;
1104 }
1105
1106 if (stat & OMAP_I2C_STAT_XRDY) {
1107 u8 num_bytes = 1;
1108 int ret;
1109
1110 if (omap->threshold)
1111 num_bytes = omap->threshold;
1112
1113 ret = omap_i2c_transmit_data(omap, num_bytes, false);
1114 if (ret < 0)
1115 break;
1116
1117 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XRDY);
1118 continue;
1119 }
1120
1121 if (stat & OMAP_I2C_STAT_ROVR) {
1122 dev_err(omap->dev, "Receive overrun\n");
1123 err |= OMAP_I2C_STAT_ROVR;
1124 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_ROVR);
1125 break;
1126 }
1127
1128 if (stat & OMAP_I2C_STAT_XUDF) {
1129 dev_err(omap->dev, "Transmit underflow\n");
1130 err |= OMAP_I2C_STAT_XUDF;
1131 omap_i2c_ack_stat(omap, OMAP_I2C_STAT_XUDF);
1132 break;
1133 }
1134 } while (stat);
1135
1136 omap_i2c_complete_cmd(omap, err);
1137
1138 out:
1139 return IRQ_HANDLED;
1140 }
1141
1142 static const struct i2c_algorithm omap_i2c_algo = {
1143 .master_xfer = omap_i2c_xfer,
1144 .functionality = omap_i2c_func,
1145 };
1146
1147 #ifdef CONFIG_OF
1148 static struct omap_i2c_bus_platform_data omap2420_pdata = {
1149 .rev = OMAP_I2C_IP_VERSION_1,
1150 .flags = OMAP_I2C_FLAG_NO_FIFO |
1151 OMAP_I2C_FLAG_SIMPLE_CLOCK |
1152 OMAP_I2C_FLAG_16BIT_DATA_REG |
1153 OMAP_I2C_FLAG_BUS_SHIFT_2,
1154 };
1155
1156 static struct omap_i2c_bus_platform_data omap2430_pdata = {
1157 .rev = OMAP_I2C_IP_VERSION_1,
1158 .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
1159 OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
1160 };
1161
1162 static struct omap_i2c_bus_platform_data omap3_pdata = {
1163 .rev = OMAP_I2C_IP_VERSION_1,
1164 .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
1165 };
1166
1167 static struct omap_i2c_bus_platform_data omap4_pdata = {
1168 .rev = OMAP_I2C_IP_VERSION_2,
1169 };
1170
1171 static const struct of_device_id omap_i2c_of_match[] = {
1172 {
1173 .compatible = "ti,omap4-i2c",
1174 .data = &omap4_pdata,
1175 },
1176 {
1177 .compatible = "ti,omap3-i2c",
1178 .data = &omap3_pdata,
1179 },
1180 {
1181 .compatible = "ti,omap2430-i2c",
1182 .data = &omap2430_pdata,
1183 },
1184 {
1185 .compatible = "ti,omap2420-i2c",
1186 .data = &omap2420_pdata,
1187 },
1188 { },
1189 };
1190 MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
1191 #endif
1192
1193 #define OMAP_I2C_SCHEME(rev) ((rev & 0xc000) >> 14)
1194
1195 #define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4)
1196 #define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf)
1197
1198 #define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7)
1199 #define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f)
1200 #define OMAP_I2C_SCHEME_0 0
1201 #define OMAP_I2C_SCHEME_1 1
1202
omap_i2c_get_scl(struct i2c_adapter * adap)1203 static int omap_i2c_get_scl(struct i2c_adapter *adap)
1204 {
1205 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1206 u32 reg;
1207
1208 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1209
1210 return reg & OMAP_I2C_SYSTEST_SCL_I_FUNC;
1211 }
1212
omap_i2c_get_sda(struct i2c_adapter * adap)1213 static int omap_i2c_get_sda(struct i2c_adapter *adap)
1214 {
1215 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1216 u32 reg;
1217
1218 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1219
1220 return reg & OMAP_I2C_SYSTEST_SDA_I_FUNC;
1221 }
1222
omap_i2c_set_scl(struct i2c_adapter * adap,int val)1223 static void omap_i2c_set_scl(struct i2c_adapter *adap, int val)
1224 {
1225 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1226 u32 reg;
1227
1228 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1229 if (val)
1230 reg |= OMAP_I2C_SYSTEST_SCL_O;
1231 else
1232 reg &= ~OMAP_I2C_SYSTEST_SCL_O;
1233 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1234 }
1235
omap_i2c_prepare_recovery(struct i2c_adapter * adap)1236 static void omap_i2c_prepare_recovery(struct i2c_adapter *adap)
1237 {
1238 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1239 u32 reg;
1240
1241 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1242 /* enable test mode */
1243 reg |= OMAP_I2C_SYSTEST_ST_EN;
1244 /* select SDA/SCL IO mode */
1245 reg |= 3 << OMAP_I2C_SYSTEST_TMODE_SHIFT;
1246 /* set SCL to high-impedance state (reset value is 0) */
1247 reg |= OMAP_I2C_SYSTEST_SCL_O;
1248 /* set SDA to high-impedance state (reset value is 0) */
1249 reg |= OMAP_I2C_SYSTEST_SDA_O;
1250 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1251 }
1252
omap_i2c_unprepare_recovery(struct i2c_adapter * adap)1253 static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap)
1254 {
1255 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
1256 u32 reg;
1257
1258 reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
1259 /* restore reset values */
1260 reg &= ~OMAP_I2C_SYSTEST_ST_EN;
1261 reg &= ~OMAP_I2C_SYSTEST_TMODE_MASK;
1262 reg &= ~OMAP_I2C_SYSTEST_SCL_O;
1263 reg &= ~OMAP_I2C_SYSTEST_SDA_O;
1264 omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
1265 }
1266
1267 static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = {
1268 .get_scl = omap_i2c_get_scl,
1269 .get_sda = omap_i2c_get_sda,
1270 .set_scl = omap_i2c_set_scl,
1271 .prepare_recovery = omap_i2c_prepare_recovery,
1272 .unprepare_recovery = omap_i2c_unprepare_recovery,
1273 .recover_bus = i2c_generic_scl_recovery,
1274 };
1275
1276 static int
omap_i2c_probe(struct platform_device * pdev)1277 omap_i2c_probe(struct platform_device *pdev)
1278 {
1279 struct omap_i2c_dev *omap;
1280 struct i2c_adapter *adap;
1281 struct resource *mem;
1282 const struct omap_i2c_bus_platform_data *pdata =
1283 dev_get_platdata(&pdev->dev);
1284 struct device_node *node = pdev->dev.of_node;
1285 const struct of_device_id *match;
1286 int irq;
1287 int r;
1288 u32 rev;
1289 u16 minor, major;
1290
1291 irq = platform_get_irq(pdev, 0);
1292 if (irq < 0) {
1293 dev_err(&pdev->dev, "no irq resource?\n");
1294 return irq;
1295 }
1296
1297 omap = devm_kzalloc(&pdev->dev, sizeof(struct omap_i2c_dev), GFP_KERNEL);
1298 if (!omap)
1299 return -ENOMEM;
1300
1301 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1302 omap->base = devm_ioremap_resource(&pdev->dev, mem);
1303 if (IS_ERR(omap->base))
1304 return PTR_ERR(omap->base);
1305
1306 match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev);
1307 if (match) {
1308 u32 freq = 100000; /* default to 100000 Hz */
1309
1310 pdata = match->data;
1311 omap->flags = pdata->flags;
1312
1313 of_property_read_u32(node, "clock-frequency", &freq);
1314 /* convert DT freq value in Hz into kHz for speed */
1315 omap->speed = freq / 1000;
1316 } else if (pdata != NULL) {
1317 omap->speed = pdata->clkrate;
1318 omap->flags = pdata->flags;
1319 omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
1320 }
1321
1322 omap->dev = &pdev->dev;
1323 omap->irq = irq;
1324
1325 platform_set_drvdata(pdev, omap);
1326 init_completion(&omap->cmd_complete);
1327
1328 omap->reg_shift = (omap->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
1329
1330 pm_runtime_enable(omap->dev);
1331 pm_runtime_set_autosuspend_delay(omap->dev, OMAP_I2C_PM_TIMEOUT);
1332 pm_runtime_use_autosuspend(omap->dev);
1333
1334 r = pm_runtime_get_sync(omap->dev);
1335 if (r < 0)
1336 goto err_free_mem;
1337
1338 /*
1339 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
1340 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
1341 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
1342 * readw_relaxed is done.
1343 */
1344 rev = readw_relaxed(omap->base + 0x04);
1345
1346 omap->scheme = OMAP_I2C_SCHEME(rev);
1347 switch (omap->scheme) {
1348 case OMAP_I2C_SCHEME_0:
1349 omap->regs = (u8 *)reg_map_ip_v1;
1350 omap->rev = omap_i2c_read_reg(omap, OMAP_I2C_REV_REG);
1351 minor = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
1352 major = OMAP_I2C_REV_SCHEME_0_MAJOR(omap->rev);
1353 break;
1354 case OMAP_I2C_SCHEME_1:
1355 /* FALLTHROUGH */
1356 default:
1357 omap->regs = (u8 *)reg_map_ip_v2;
1358 rev = (rev << 16) |
1359 omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_REVNB_LO);
1360 minor = OMAP_I2C_REV_SCHEME_1_MINOR(rev);
1361 major = OMAP_I2C_REV_SCHEME_1_MAJOR(rev);
1362 omap->rev = rev;
1363 }
1364
1365 omap->errata = 0;
1366
1367 if (omap->rev >= OMAP_I2C_REV_ON_2430 &&
1368 omap->rev < OMAP_I2C_REV_ON_4430_PLUS)
1369 omap->errata |= I2C_OMAP_ERRATA_I207;
1370
1371 if (omap->rev <= OMAP_I2C_REV_ON_3430_3530)
1372 omap->errata |= I2C_OMAP_ERRATA_I462;
1373
1374 if (!(omap->flags & OMAP_I2C_FLAG_NO_FIFO)) {
1375 u16 s;
1376
1377 /* Set up the fifo size - Get total size */
1378 s = (omap_i2c_read_reg(omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
1379 omap->fifo_size = 0x8 << s;
1380
1381 /*
1382 * Set up notification threshold as half the total available
1383 * size. This is to ensure that we can handle the status on int
1384 * call back latencies.
1385 */
1386
1387 omap->fifo_size = (omap->fifo_size / 2);
1388
1389 if (omap->rev < OMAP_I2C_REV_ON_3630)
1390 omap->b_hw = 1; /* Enable hardware fixes */
1391
1392 /* calculate wakeup latency constraint for MPU */
1393 if (omap->set_mpu_wkup_lat != NULL)
1394 omap->latency = (1000000 * omap->fifo_size) /
1395 (1000 * omap->speed / 8);
1396 }
1397
1398 /* reset ASAP, clearing any IRQs */
1399 omap_i2c_init(omap);
1400
1401 if (omap->rev < OMAP_I2C_OMAP1_REV_2)
1402 r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr,
1403 IRQF_NO_SUSPEND, pdev->name, omap);
1404 else
1405 r = devm_request_threaded_irq(&pdev->dev, omap->irq,
1406 omap_i2c_isr, omap_i2c_isr_thread,
1407 IRQF_NO_SUSPEND | IRQF_ONESHOT,
1408 pdev->name, omap);
1409
1410 if (r) {
1411 dev_err(omap->dev, "failure requesting irq %i\n", omap->irq);
1412 goto err_unuse_clocks;
1413 }
1414
1415 adap = &omap->adapter;
1416 i2c_set_adapdata(adap, omap);
1417 adap->owner = THIS_MODULE;
1418 adap->class = I2C_CLASS_DEPRECATED;
1419 strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
1420 adap->algo = &omap_i2c_algo;
1421 adap->dev.parent = &pdev->dev;
1422 adap->dev.of_node = pdev->dev.of_node;
1423 adap->bus_recovery_info = &omap_i2c_bus_recovery_info;
1424
1425 /* i2c device drivers may be active on return from add_adapter() */
1426 adap->nr = pdev->id;
1427 r = i2c_add_numbered_adapter(adap);
1428 if (r)
1429 goto err_unuse_clocks;
1430
1431 dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
1432 major, minor, omap->speed);
1433
1434 pm_runtime_mark_last_busy(omap->dev);
1435 pm_runtime_put_autosuspend(omap->dev);
1436
1437 return 0;
1438
1439 err_unuse_clocks:
1440 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
1441 pm_runtime_dont_use_autosuspend(omap->dev);
1442 pm_runtime_put_sync(omap->dev);
1443 pm_runtime_disable(&pdev->dev);
1444 err_free_mem:
1445
1446 return r;
1447 }
1448
omap_i2c_remove(struct platform_device * pdev)1449 static int omap_i2c_remove(struct platform_device *pdev)
1450 {
1451 struct omap_i2c_dev *omap = platform_get_drvdata(pdev);
1452 int ret;
1453
1454 i2c_del_adapter(&omap->adapter);
1455 ret = pm_runtime_get_sync(&pdev->dev);
1456 if (ret < 0)
1457 return ret;
1458
1459 omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0);
1460 pm_runtime_dont_use_autosuspend(&pdev->dev);
1461 pm_runtime_put_sync(&pdev->dev);
1462 pm_runtime_disable(&pdev->dev);
1463 return 0;
1464 }
1465
1466 #ifdef CONFIG_PM
omap_i2c_runtime_suspend(struct device * dev)1467 static int omap_i2c_runtime_suspend(struct device *dev)
1468 {
1469 struct omap_i2c_dev *omap = dev_get_drvdata(dev);
1470
1471 omap->iestate = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
1472
1473 if (omap->scheme == OMAP_I2C_SCHEME_0)
1474 omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, 0);
1475 else
1476 omap_i2c_write_reg(omap, OMAP_I2C_IP_V2_IRQENABLE_CLR,
1477 OMAP_I2C_IP_V2_INTERRUPTS_MASK);
1478
1479 if (omap->rev < OMAP_I2C_OMAP1_REV_2) {
1480 omap_i2c_read_reg(omap, OMAP_I2C_IV_REG); /* Read clears */
1481 } else {
1482 omap_i2c_write_reg(omap, OMAP_I2C_STAT_REG, omap->iestate);
1483
1484 /* Flush posted write */
1485 omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG);
1486 }
1487
1488 pinctrl_pm_select_sleep_state(dev);
1489
1490 return 0;
1491 }
1492
omap_i2c_runtime_resume(struct device * dev)1493 static int omap_i2c_runtime_resume(struct device *dev)
1494 {
1495 struct omap_i2c_dev *omap = dev_get_drvdata(dev);
1496
1497 pinctrl_pm_select_default_state(dev);
1498
1499 if (!omap->regs)
1500 return 0;
1501
1502 __omap_i2c_init(omap);
1503
1504 return 0;
1505 }
1506
1507 static struct dev_pm_ops omap_i2c_pm_ops = {
1508 SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
1509 omap_i2c_runtime_resume, NULL)
1510 };
1511 #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
1512 #else
1513 #define OMAP_I2C_PM_OPS NULL
1514 #endif /* CONFIG_PM */
1515
1516 static struct platform_driver omap_i2c_driver = {
1517 .probe = omap_i2c_probe,
1518 .remove = omap_i2c_remove,
1519 .driver = {
1520 .name = "omap_i2c",
1521 .pm = OMAP_I2C_PM_OPS,
1522 .of_match_table = of_match_ptr(omap_i2c_of_match),
1523 },
1524 };
1525
1526 /* I2C may be needed to bring up other drivers */
1527 static int __init
omap_i2c_init_driver(void)1528 omap_i2c_init_driver(void)
1529 {
1530 return platform_driver_register(&omap_i2c_driver);
1531 }
1532 subsys_initcall(omap_i2c_init_driver);
1533
omap_i2c_exit_driver(void)1534 static void __exit omap_i2c_exit_driver(void)
1535 {
1536 platform_driver_unregister(&omap_i2c_driver);
1537 }
1538 module_exit(omap_i2c_exit_driver);
1539
1540 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
1541 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
1542 MODULE_LICENSE("GPL");
1543 MODULE_ALIAS("platform:omap_i2c");
1544