1 /*
2 * Wacom protocol 4 serial tablet driver
3 *
4 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
5 * Copyright 2011-2012 Julian Squires <julian@cipht.net>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version of 2 of the License, or (at your
10 * option) any later version. See the file COPYING in the main directory of
11 * this archive for more details.
12 *
13 * Many thanks to Bill Seremetis, without whom PenPartner support
14 * would not have been possible. Thanks to Patrick Mahoney.
15 *
16 * This driver was developed with reference to much code written by others,
17 * particularly:
18 * - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
19 * - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
20 * - the USB wacom input driver, credited to many people
21 * (see drivers/input/tablet/wacom.h);
22 * - new and old versions of linuxwacom / xf86-input-wacom credited to
23 * Frederic Lepied, France. <Lepied@XFree86.org> and
24 * Ping Cheng, Wacom. <pingc@wacom.com>;
25 * - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
26 * by Frederic Lepied and Raph Levien <raph@gtk.org>.
27 *
28 * To do:
29 * - support pad buttons; (requires access to a model with pad buttons)
30 * - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
31 */
32
33 /*
34 * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
35 * protocol 4 uses 7 or 9 byte of data in the following format:
36 *
37 * Byte 1
38 * bit 7 Sync bit always 1
39 * bit 6 Pointing device detected
40 * bit 5 Cursor = 0 / Stylus = 1
41 * bit 4 Reserved
42 * bit 3 1 if a button on the pointing device has been pressed
43 * bit 2 P0 (optional)
44 * bit 1 X15
45 * bit 0 X14
46 *
47 * Byte 2
48 * bit 7 Always 0
49 * bits 6-0 = X13 - X7
50 *
51 * Byte 3
52 * bit 7 Always 0
53 * bits 6-0 = X6 - X0
54 *
55 * Byte 4
56 * bit 7 Always 0
57 * bit 6 B3
58 * bit 5 B2
59 * bit 4 B1
60 * bit 3 B0
61 * bit 2 P1 (optional)
62 * bit 1 Y15
63 * bit 0 Y14
64 *
65 * Byte 5
66 * bit 7 Always 0
67 * bits 6-0 = Y13 - Y7
68 *
69 * Byte 6
70 * bit 7 Always 0
71 * bits 6-0 = Y6 - Y0
72 *
73 * Byte 7
74 * bit 7 Always 0
75 * bit 6 Sign of pressure data; or wheel-rel for cursor tool
76 * bit 5 P7; or REL1 for cursor tool
77 * bit 4 P6; or REL0 for cursor tool
78 * bit 3 P5
79 * bit 2 P4
80 * bit 1 P3
81 * bit 0 P2
82 *
83 * byte 8 and 9 are optional and present only
84 * in tilt mode.
85 *
86 * Byte 8
87 * bit 7 Always 0
88 * bit 6 Sign of tilt X
89 * bit 5 Xt6
90 * bit 4 Xt5
91 * bit 3 Xt4
92 * bit 2 Xt3
93 * bit 1 Xt2
94 * bit 0 Xt1
95 *
96 * Byte 9
97 * bit 7 Always 0
98 * bit 6 Sign of tilt Y
99 * bit 5 Yt6
100 * bit 4 Yt5
101 * bit 3 Yt4
102 * bit 2 Yt3
103 * bit 1 Yt2
104 * bit 0 Yt1
105 */
106
107 #include <linux/completion.h>
108 #include <linux/init.h>
109 #include <linux/input.h>
110 #include <linux/interrupt.h>
111 #include <linux/kernel.h>
112 #include <linux/module.h>
113 #include <linux/serio.h>
114 #include <linux/slab.h>
115 #include <linux/string.h>
116
117 MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
118 MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
119 MODULE_LICENSE("GPL");
120
121 #define REQUEST_MODEL_AND_ROM_VERSION "~#"
122 #define REQUEST_MAX_COORDINATES "~C\r"
123 #define REQUEST_CONFIGURATION_STRING "~R\r"
124 #define REQUEST_RESET_TO_PROTOCOL_IV "\r#"
125 /*
126 * Note: sending "\r$\r" causes at least the Digitizer II to send
127 * packets in ASCII instead of binary. "\r#" seems to undo that.
128 */
129
130 #define COMMAND_START_SENDING_PACKETS "ST\r"
131 #define COMMAND_STOP_SENDING_PACKETS "SP\r"
132 #define COMMAND_MULTI_MODE_INPUT "MU1\r"
133 #define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r"
134 #define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r"
135 #define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r"
136 #define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r"
137 #define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r"
138 #define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r"
139 #define COMMAND_ENABLE_PRESSURE_MODE "PH1\r"
140 #define COMMAND_Z_FILTER "ZF1\r"
141
142 /* Note that this is a protocol 4 packet without tilt information. */
143 #define PACKET_LENGTH 7
144 #define DATA_SIZE 32
145
146 /* flags */
147 #define F_COVERS_SCREEN 0x01
148 #define F_HAS_STYLUS2 0x02
149 #define F_HAS_SCROLLWHEEL 0x04
150
151 /* device IDs */
152 #define STYLUS_DEVICE_ID 0x02
153 #define CURSOR_DEVICE_ID 0x06
154 #define ERASER_DEVICE_ID 0x0A
155
156 enum { STYLUS = 1, ERASER, CURSOR };
157
158 static const struct {
159 int device_id;
160 int input_id;
161 } tools[] = {
162 { 0, 0 },
163 { STYLUS_DEVICE_ID, BTN_TOOL_PEN },
164 { ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
165 { CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
166 };
167
168 struct wacom {
169 struct input_dev *dev;
170 struct completion cmd_done;
171 int result;
172 u8 expect;
173 u8 eraser_mask;
174 unsigned int extra_z_bits;
175 unsigned int flags;
176 unsigned int res_x, res_y;
177 unsigned int max_x, max_y;
178 unsigned int tool;
179 unsigned int idx;
180 u8 data[DATA_SIZE];
181 char phys[32];
182 };
183
184 enum {
185 MODEL_CINTIQ = 0x504C, /* PL */
186 MODEL_CINTIQ2 = 0x4454, /* DT */
187 MODEL_DIGITIZER_II = 0x5544, /* UD */
188 MODEL_GRAPHIRE = 0x4554, /* ET */
189 MODEL_PENPARTNER = 0x4354, /* CT */
190 };
191
wacom_handle_model_response(struct wacom * wacom)192 static void wacom_handle_model_response(struct wacom *wacom)
193 {
194 int major_v, minor_v, r = 0;
195 char *p;
196
197 p = strrchr(wacom->data, 'V');
198 if (p)
199 r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
200 if (r != 2)
201 major_v = minor_v = 0;
202
203 switch (wacom->data[2] << 8 | wacom->data[3]) {
204 case MODEL_CINTIQ: /* UNTESTED */
205 case MODEL_CINTIQ2:
206 if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
207 wacom->dev->name = "Wacom Cintiq";
208 wacom->dev->id.version = MODEL_CINTIQ;
209 } else {
210 wacom->dev->name = "Wacom Cintiq II";
211 wacom->dev->id.version = MODEL_CINTIQ2;
212 }
213 wacom->res_x = 508;
214 wacom->res_y = 508;
215
216 switch (wacom->data[5] << 8 | wacom->data[6]) {
217 case 0x3731: /* PL-710 */
218 wacom->res_x = 2540;
219 wacom->res_y = 2540;
220 /* fall through */
221 case 0x3535: /* PL-550 */
222 case 0x3830: /* PL-800 */
223 wacom->extra_z_bits = 2;
224 }
225
226 wacom->flags = F_COVERS_SCREEN;
227 break;
228
229 case MODEL_PENPARTNER:
230 wacom->dev->name = "Wacom Penpartner";
231 wacom->dev->id.version = MODEL_PENPARTNER;
232 wacom->res_x = 1000;
233 wacom->res_y = 1000;
234 break;
235
236 case MODEL_GRAPHIRE:
237 wacom->dev->name = "Wacom Graphire";
238 wacom->dev->id.version = MODEL_GRAPHIRE;
239 wacom->res_x = 1016;
240 wacom->res_y = 1016;
241 wacom->max_x = 5103;
242 wacom->max_y = 3711;
243 wacom->extra_z_bits = 2;
244 wacom->eraser_mask = 0x08;
245 wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
246 break;
247
248 case MODEL_DIGITIZER_II:
249 wacom->dev->name = "Wacom Digitizer II";
250 wacom->dev->id.version = MODEL_DIGITIZER_II;
251 if (major_v == 1 && minor_v <= 2)
252 wacom->extra_z_bits = 0; /* UNTESTED */
253 break;
254
255 default:
256 dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
257 wacom->data);
258 wacom->result = -ENODEV;
259 return;
260 }
261
262 dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
263 wacom->dev->name, major_v, minor_v);
264 }
265
wacom_handle_configuration_response(struct wacom * wacom)266 static void wacom_handle_configuration_response(struct wacom *wacom)
267 {
268 int r, skip;
269
270 dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
271 r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
272 &wacom->res_x, &wacom->res_y);
273 if (r != 5)
274 dev_warn(&wacom->dev->dev, "could not get resolution\n");
275 }
276
wacom_handle_coordinates_response(struct wacom * wacom)277 static void wacom_handle_coordinates_response(struct wacom *wacom)
278 {
279 int r;
280
281 dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
282 r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
283 if (r != 2)
284 dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
285 }
286
wacom_handle_response(struct wacom * wacom)287 static void wacom_handle_response(struct wacom *wacom)
288 {
289 if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
290 dev_err(&wacom->dev->dev,
291 "Wacom got an unexpected response: %s\n", wacom->data);
292 wacom->result = -EIO;
293 } else {
294 wacom->result = 0;
295
296 switch (wacom->data[1]) {
297 case '#':
298 wacom_handle_model_response(wacom);
299 break;
300 case 'R':
301 wacom_handle_configuration_response(wacom);
302 break;
303 case 'C':
304 wacom_handle_coordinates_response(wacom);
305 break;
306 }
307 }
308
309 complete(&wacom->cmd_done);
310 }
311
wacom_handle_packet(struct wacom * wacom)312 static void wacom_handle_packet(struct wacom *wacom)
313 {
314 u8 in_proximity_p, stylus_p, button;
315 unsigned int tool;
316 int x, y, z;
317
318 in_proximity_p = wacom->data[0] & 0x40;
319 stylus_p = wacom->data[0] & 0x20;
320 button = (wacom->data[3] & 0x78) >> 3;
321 x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
322 y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
323
324 if (in_proximity_p && stylus_p) {
325 z = wacom->data[6] & 0x7f;
326 if (wacom->extra_z_bits >= 1)
327 z = z << 1 | (wacom->data[3] & 0x4) >> 2;
328 if (wacom->extra_z_bits > 1)
329 z = z << 1 | (wacom->data[0] & 0x4) >> 2;
330 z = z ^ (0x40 << wacom->extra_z_bits);
331 } else {
332 z = -1;
333 }
334
335 if (stylus_p)
336 tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
337 else
338 tool = CURSOR;
339
340 if (tool != wacom->tool && wacom->tool != 0) {
341 input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
342 input_sync(wacom->dev);
343 }
344 wacom->tool = tool;
345
346 input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
347 input_report_abs(wacom->dev, ABS_MISC,
348 in_proximity_p ? tools[tool].device_id : 0);
349 input_report_abs(wacom->dev, ABS_X, x);
350 input_report_abs(wacom->dev, ABS_Y, y);
351 input_report_abs(wacom->dev, ABS_PRESSURE, z);
352 if (stylus_p) {
353 input_report_key(wacom->dev, BTN_TOUCH, button & 1);
354 input_report_key(wacom->dev, BTN_STYLUS, button & 2);
355 input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
356 } else {
357 input_report_key(wacom->dev, BTN_LEFT, button & 1);
358 input_report_key(wacom->dev, BTN_RIGHT, button & 2);
359 input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
360 /* handle relative wheel for non-stylus device */
361 z = (wacom->data[6] & 0x30) >> 4;
362 if (wacom->data[6] & 0x40)
363 z = -z;
364 input_report_rel(wacom->dev, REL_WHEEL, z);
365 }
366 input_sync(wacom->dev);
367 }
368
wacom_clear_data_buf(struct wacom * wacom)369 static void wacom_clear_data_buf(struct wacom *wacom)
370 {
371 memset(wacom->data, 0, DATA_SIZE);
372 wacom->idx = 0;
373 }
374
wacom_interrupt(struct serio * serio,unsigned char data,unsigned int flags)375 static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
376 unsigned int flags)
377 {
378 struct wacom *wacom = serio_get_drvdata(serio);
379
380 if (data & 0x80)
381 wacom->idx = 0;
382
383 /*
384 * We're either expecting a carriage return-terminated ASCII
385 * response string, or a seven-byte packet with the MSB set on
386 * the first byte.
387 *
388 * Note however that some tablets (the PenPartner, for
389 * example) don't send a carriage return at the end of a
390 * command. We handle these by waiting for timeout.
391 */
392 if (data == '\r' && !(wacom->data[0] & 0x80)) {
393 wacom_handle_response(wacom);
394 wacom_clear_data_buf(wacom);
395 return IRQ_HANDLED;
396 }
397
398 /* Leave place for 0 termination */
399 if (wacom->idx > (DATA_SIZE - 2)) {
400 dev_dbg(&wacom->dev->dev,
401 "throwing away %d bytes of garbage\n", wacom->idx);
402 wacom_clear_data_buf(wacom);
403 }
404 wacom->data[wacom->idx++] = data;
405
406 if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
407 wacom_handle_packet(wacom);
408 wacom_clear_data_buf(wacom);
409 }
410
411 return IRQ_HANDLED;
412 }
413
wacom_disconnect(struct serio * serio)414 static void wacom_disconnect(struct serio *serio)
415 {
416 struct wacom *wacom = serio_get_drvdata(serio);
417
418 serio_close(serio);
419 serio_set_drvdata(serio, NULL);
420 input_unregister_device(wacom->dev);
421 kfree(wacom);
422 }
423
wacom_send(struct serio * serio,const u8 * command)424 static int wacom_send(struct serio *serio, const u8 *command)
425 {
426 int err = 0;
427
428 for (; !err && *command; command++)
429 err = serio_write(serio, *command);
430
431 return err;
432 }
433
wacom_send_setup_string(struct wacom * wacom,struct serio * serio)434 static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
435 {
436 const u8 *cmd;
437
438 switch (wacom->dev->id.version) {
439 case MODEL_CINTIQ: /* UNTESTED */
440 cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
441 COMMAND_TRANSMIT_AT_MAX_RATE
442 COMMAND_ENABLE_CONTINUOUS_MODE
443 COMMAND_START_SENDING_PACKETS;
444 break;
445
446 case MODEL_PENPARTNER:
447 cmd = COMMAND_ENABLE_PRESSURE_MODE
448 COMMAND_START_SENDING_PACKETS;
449 break;
450
451 default:
452 cmd = COMMAND_MULTI_MODE_INPUT
453 COMMAND_ORIGIN_IN_UPPER_LEFT
454 COMMAND_ENABLE_ALL_MACRO_BUTTONS
455 COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
456 COMMAND_TRANSMIT_AT_MAX_RATE
457 COMMAND_DISABLE_INCREMENTAL_MODE
458 COMMAND_ENABLE_CONTINUOUS_MODE
459 COMMAND_Z_FILTER
460 COMMAND_START_SENDING_PACKETS;
461 break;
462 }
463
464 return wacom_send(serio, cmd);
465 }
466
wacom_send_and_wait(struct wacom * wacom,struct serio * serio,const u8 * cmd,const char * desc)467 static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
468 const u8 *cmd, const char *desc)
469 {
470 int err;
471 unsigned long u;
472
473 wacom->expect = cmd[1];
474 init_completion(&wacom->cmd_done);
475
476 err = wacom_send(serio, cmd);
477 if (err)
478 return err;
479
480 u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
481 if (u == 0) {
482 /* Timeout, process what we've received. */
483 wacom_handle_response(wacom);
484 }
485
486 wacom->expect = 0;
487 return wacom->result;
488 }
489
wacom_setup(struct wacom * wacom,struct serio * serio)490 static int wacom_setup(struct wacom *wacom, struct serio *serio)
491 {
492 int err;
493
494 /* Note that setting the link speed is the job of inputattach.
495 * We assume that reset negotiation has already happened,
496 * here. */
497 err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
498 "model and version");
499 if (err)
500 return err;
501
502 if (!(wacom->res_x && wacom->res_y)) {
503 err = wacom_send_and_wait(wacom, serio,
504 REQUEST_CONFIGURATION_STRING,
505 "configuration string");
506 if (err)
507 return err;
508 }
509
510 if (!(wacom->max_x && wacom->max_y)) {
511 err = wacom_send_and_wait(wacom, serio,
512 REQUEST_MAX_COORDINATES,
513 "coordinates string");
514 if (err)
515 return err;
516 }
517
518 return wacom_send_setup_string(wacom, serio);
519 }
520
wacom_connect(struct serio * serio,struct serio_driver * drv)521 static int wacom_connect(struct serio *serio, struct serio_driver *drv)
522 {
523 struct wacom *wacom;
524 struct input_dev *input_dev;
525 int err = -ENOMEM;
526
527 wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
528 input_dev = input_allocate_device();
529 if (!wacom || !input_dev)
530 goto free_device;
531
532 wacom->dev = input_dev;
533 wacom->extra_z_bits = 1;
534 wacom->eraser_mask = 0x04;
535 wacom->tool = wacom->idx = 0;
536 snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
537 input_dev->phys = wacom->phys;
538 input_dev->id.bustype = BUS_RS232;
539 input_dev->id.vendor = SERIO_WACOM_IV;
540 input_dev->id.product = serio->id.extra;
541 input_dev->dev.parent = &serio->dev;
542
543 input_dev->evbit[0] =
544 BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
545 set_bit(ABS_MISC, input_dev->absbit);
546 set_bit(BTN_TOOL_PEN, input_dev->keybit);
547 set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
548 set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
549 set_bit(BTN_TOUCH, input_dev->keybit);
550 set_bit(BTN_STYLUS, input_dev->keybit);
551 set_bit(BTN_LEFT, input_dev->keybit);
552 set_bit(BTN_RIGHT, input_dev->keybit);
553 set_bit(BTN_MIDDLE, input_dev->keybit);
554
555 serio_set_drvdata(serio, wacom);
556
557 err = serio_open(serio, drv);
558 if (err)
559 goto free_device;
560
561 err = wacom_setup(wacom, serio);
562 if (err)
563 goto close_serio;
564
565 set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
566 if (!(wacom->flags & F_COVERS_SCREEN))
567 __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
568
569 if (wacom->flags & F_HAS_STYLUS2)
570 __set_bit(BTN_STYLUS2, input_dev->keybit);
571
572 if (wacom->flags & F_HAS_SCROLLWHEEL)
573 __set_bit(REL_WHEEL, input_dev->relbit);
574
575 input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
576 input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
577 input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
578 input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
579 input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
580 (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
581
582 err = input_register_device(wacom->dev);
583 if (err)
584 goto close_serio;
585
586 return 0;
587
588 close_serio:
589 serio_close(serio);
590 free_device:
591 serio_set_drvdata(serio, NULL);
592 input_free_device(input_dev);
593 kfree(wacom);
594 return err;
595 }
596
597 static struct serio_device_id wacom_serio_ids[] = {
598 {
599 .type = SERIO_RS232,
600 .proto = SERIO_WACOM_IV,
601 .id = SERIO_ANY,
602 .extra = SERIO_ANY,
603 },
604 { 0 }
605 };
606
607 MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
608
609 static struct serio_driver wacom_drv = {
610 .driver = {
611 .name = "wacom_serial4",
612 },
613 .description = "Wacom protocol 4 serial tablet driver",
614 .id_table = wacom_serio_ids,
615 .interrupt = wacom_interrupt,
616 .connect = wacom_connect,
617 .disconnect = wacom_disconnect,
618 };
619
620 module_serio_driver(wacom_drv);
621