1 /*
2 * cx18 ADEC audio functions
3 *
4 * Derived from cx25840-core.c
5 *
6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
22 * 02110-1301, USA.
23 */
24
25 #include "cx18-driver.h"
26 #include "cx18-io.h"
27 #include "cx18-cards.h"
28
cx18_av_write(struct cx18 * cx,u16 addr,u8 value)29 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
30 {
31 u32 reg = 0xc40000 + (addr & ~3);
32 u32 mask = 0xff;
33 int shift = (addr & 3) * 8;
34 u32 x = cx18_read_reg(cx, reg);
35
36 x = (x & ~(mask << shift)) | ((u32)value << shift);
37 cx18_write_reg(cx, x, reg);
38 return 0;
39 }
40
cx18_av_write_expect(struct cx18 * cx,u16 addr,u8 value,u8 eval,u8 mask)41 int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask)
42 {
43 u32 reg = 0xc40000 + (addr & ~3);
44 int shift = (addr & 3) * 8;
45 u32 x = cx18_read_reg(cx, reg);
46
47 x = (x & ~((u32)0xff << shift)) | ((u32)value << shift);
48 cx18_write_reg_expect(cx, x, reg,
49 ((u32)eval << shift), ((u32)mask << shift));
50 return 0;
51 }
52
cx18_av_write4(struct cx18 * cx,u16 addr,u32 value)53 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value)
54 {
55 cx18_write_reg(cx, value, 0xc40000 + addr);
56 return 0;
57 }
58
59 int
cx18_av_write4_expect(struct cx18 * cx,u16 addr,u32 value,u32 eval,u32 mask)60 cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask)
61 {
62 cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask);
63 return 0;
64 }
65
cx18_av_write4_noretry(struct cx18 * cx,u16 addr,u32 value)66 int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value)
67 {
68 cx18_write_reg_noretry(cx, value, 0xc40000 + addr);
69 return 0;
70 }
71
cx18_av_read(struct cx18 * cx,u16 addr)72 u8 cx18_av_read(struct cx18 *cx, u16 addr)
73 {
74 u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3));
75 int shift = (addr & 3) * 8;
76
77 return (x >> shift) & 0xff;
78 }
79
cx18_av_read4(struct cx18 * cx,u16 addr)80 u32 cx18_av_read4(struct cx18 *cx, u16 addr)
81 {
82 return cx18_read_reg(cx, 0xc40000 + addr);
83 }
84
cx18_av_and_or(struct cx18 * cx,u16 addr,unsigned and_mask,u8 or_value)85 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask,
86 u8 or_value)
87 {
88 return cx18_av_write(cx, addr,
89 (cx18_av_read(cx, addr) & and_mask) |
90 or_value);
91 }
92
cx18_av_and_or4(struct cx18 * cx,u16 addr,u32 and_mask,u32 or_value)93 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask,
94 u32 or_value)
95 {
96 return cx18_av_write4(cx, addr,
97 (cx18_av_read4(cx, addr) & and_mask) |
98 or_value);
99 }
100
cx18_av_init(struct cx18 * cx)101 static void cx18_av_init(struct cx18 *cx)
102 {
103 /*
104 * The crystal freq used in calculations in this driver will be
105 * 28.636360 MHz.
106 * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
107 */
108
109 /*
110 * VDCLK Integer = 0x0f, Post Divider = 0x04
111 * AIMCLK Integer = 0x0e, Post Divider = 0x16
112 */
113 cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
114
115 /* VDCLK Fraction = 0x2be2fe */
116 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
117 cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
118
119 /* AIMCLK Fraction = 0x05227ad */
120 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
121 cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
122
123 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
124 cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
125 }
126
cx18_av_initialize(struct v4l2_subdev * sd)127 static void cx18_av_initialize(struct v4l2_subdev *sd)
128 {
129 struct cx18_av_state *state = to_cx18_av_state(sd);
130 struct cx18 *cx = v4l2_get_subdevdata(sd);
131 int default_volume;
132 u32 v;
133
134 cx18_av_loadfw(cx);
135 /* Stop 8051 code execution */
136 cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000,
137 0x03000000, 0x13000000);
138
139 /* initallize the PLL by toggling sleep bit */
140 v = cx18_av_read4(cx, CXADEC_HOST_REG1);
141 /* enable sleep mode - register appears to be read only... */
142 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe);
143 /* disable sleep mode */
144 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe,
145 v & 0xfffe, 0xffff);
146
147 /* initialize DLLs */
148 v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF;
149 /* disable FLD */
150 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v);
151 /* enable FLD */
152 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100);
153
154 v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF;
155 /* disable FLD */
156 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v);
157 /* enable FLD */
158 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100);
159
160 /* set analog bias currents. Set Vreg to 1.20V. */
161 cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802);
162
163 v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1;
164 /* enable TUNE_FIL_RST */
165 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F);
166 /* disable TUNE_FIL_RST */
167 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3,
168 v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F);
169
170 /* enable 656 output */
171 cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00);
172
173 /* video output drive strength */
174 cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2);
175
176 /* reset video */
177 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000);
178 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0);
179
180 /*
181 * Disable Video Auto-config of the Analog Front End and Video PLL.
182 *
183 * Since we only use BT.656 pixel mode, which works for both 525 and 625
184 * line systems, it's just easier for us to set registers
185 * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL),
186 * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC)
187 * ourselves, than to run around cleaning up after the auto-config.
188 *
189 * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit
190 * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL
191 * autoconfig either.)
192 *
193 * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3.
194 */
195 cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000);
196
197 /* Setup the Video and and Aux/Audio PLLs */
198 cx18_av_init(cx);
199
200 /* set video to auto-detect */
201 /* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */
202 /* set the comb notch = 1 */
203 cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800);
204
205 /* Enable wtw_en in CRUSH_CTRL (Set bit 22) */
206 /* Enable maj_sel in CRUSH_CTRL (Set bit 20) */
207 cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000);
208
209 /* Set VGA_TRACK_RANGE to 0x20 */
210 cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000);
211
212 /*
213 * Initial VBI setup
214 * VIP-1.1, 10 bit mode, enable Raw, disable sliced,
215 * don't clamp raw samples when codes are in use, 1 byte user D-words,
216 * IDID0 has line #, RP code V bit transition on VBLANK, data during
217 * blanking intervals
218 */
219 cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e);
220
221 /* Set the video input.
222 The setting in MODE_CTRL gets lost when we do the above setup */
223 /* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */
224 /* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */
225
226 /*
227 * Analog Front End (AFE)
228 * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2
229 * bypass_ch[1-3] use filter
230 * droop_comp_ch[1-3] disable
231 * clamp_en_ch[1-3] disable
232 * aud_in_sel ADC2
233 * luma_in_sel ADC1
234 * chroma_in_sel ADC2
235 * clamp_sel_ch[2-3] midcode
236 * clamp_sel_ch1 video decoder
237 * vga_sel_ch3 audio decoder
238 * vga_sel_ch[1-2] video decoder
239 * half_bw_ch[1-3] disable
240 * +12db_ch[1-3] disable
241 */
242 cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00);
243
244 /* if(dwEnable && dw3DCombAvailable) { */
245 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */
246 /* } else { */
247 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */
248 /* } */
249 cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F);
250 default_volume = cx18_av_read(cx, 0x8d4);
251 /*
252 * Enforce the legacy volume scale mapping limits to avoid
253 * -ERANGE errors when initializing the volume control
254 */
255 if (default_volume > 228) {
256 /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
257 default_volume = 228;
258 cx18_av_write(cx, 0x8d4, 228);
259 } else if (default_volume < 20) {
260 /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
261 default_volume = 20;
262 cx18_av_write(cx, 0x8d4, 20);
263 }
264 default_volume = (((228 - default_volume) >> 1) + 23) << 9;
265 state->volume->cur.val = state->volume->default_value = default_volume;
266 v4l2_ctrl_handler_setup(&state->hdl);
267 }
268
cx18_av_reset(struct v4l2_subdev * sd,u32 val)269 static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
270 {
271 cx18_av_initialize(sd);
272 return 0;
273 }
274
cx18_av_load_fw(struct v4l2_subdev * sd)275 static int cx18_av_load_fw(struct v4l2_subdev *sd)
276 {
277 struct cx18_av_state *state = to_cx18_av_state(sd);
278
279 if (!state->is_initialized) {
280 /* initialize on first use */
281 state->is_initialized = 1;
282 cx18_av_initialize(sd);
283 }
284 return 0;
285 }
286
cx18_av_std_setup(struct cx18 * cx)287 void cx18_av_std_setup(struct cx18 *cx)
288 {
289 struct cx18_av_state *state = &cx->av_state;
290 struct v4l2_subdev *sd = &state->sd;
291 v4l2_std_id std = state->std;
292
293 /*
294 * Video ADC crystal clock to pixel clock SRC decimation ratio
295 * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b
296 */
297 const int src_decimation = 0x21f;
298
299 int hblank, hactive, burst, vblank, vactive, sc;
300 int vblank656;
301 int luma_lpf, uv_lpf, comb;
302 u32 pll_int, pll_frac, pll_post;
303
304 /* datasheet startup, step 8d */
305 if (std & ~V4L2_STD_NTSC)
306 cx18_av_write(cx, 0x49f, 0x11);
307 else
308 cx18_av_write(cx, 0x49f, 0x14);
309
310 /*
311 * Note: At the end of a field, there are 3 sets of half line duration
312 * (double horizontal rate) pulses:
313 *
314 * 5 (625) or 6 (525) half-lines to blank for the vertical retrace
315 * 5 (625) or 6 (525) vertical sync pulses of half line duration
316 * 5 (625) or 6 (525) half-lines of equalization pulses
317 */
318 if (std & V4L2_STD_625_50) {
319 /*
320 * The following relationships of half line counts should hold:
321 * 625 = vblank656 + vactive
322 * 10 = vblank656 - vblank = vsync pulses + equalization pulses
323 *
324 * vblank656: half lines after line 625/mid-313 of blanked video
325 * vblank: half lines, after line 5/317, of blanked video
326 * vactive: half lines of active video +
327 * 5 half lines after the end of active video
328 *
329 * As far as I can tell:
330 * vblank656 starts counting from the falling edge of the first
331 * vsync pulse (start of line 1 or mid-313)
332 * vblank starts counting from the after the 5 vsync pulses and
333 * 5 or 4 equalization pulses (start of line 6 or 318)
334 *
335 * For 625 line systems the driver will extract VBI information
336 * from lines 6-23 and lines 318-335 (but the slicer can only
337 * handle 17 lines, not the 18 in the vblank region).
338 * In addition, we need vblank656 and vblank to be one whole
339 * line longer, to cover line 24 and 336, so the SAV/EAV RP
340 * codes get generated such that the encoder can actually
341 * extract line 23 & 335 (WSS). We'll lose 1 line in each field
342 * at the top of the screen.
343 *
344 * It appears the 5 half lines that happen after active
345 * video must be included in vactive (579 instead of 574),
346 * otherwise the colors get badly displayed in various regions
347 * of the screen. I guess the chroma comb filter gets confused
348 * without them (at least when a PVR-350 is the PAL source).
349 */
350 vblank656 = 48; /* lines 1 - 24 & 313 - 336 */
351 vblank = 38; /* lines 6 - 24 & 318 - 336 */
352 vactive = 579; /* lines 24 - 313 & 337 - 626 */
353
354 /*
355 * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is
356 * is 864 pixels = 720 active + 144 blanking. ITU-R BT.601
357 * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after
358 * the end of active video to start a horizontal line, so that
359 * leaves 132 pixels of hblank to ignore.
360 */
361 hblank = 132;
362 hactive = 720;
363
364 /*
365 * Burst gate delay (for 625 line systems)
366 * Hsync leading edge to color burst rise = 5.6 us
367 * Color burst width = 2.25 us
368 * Gate width = 4 pixel clocks
369 * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks
370 */
371 burst = 93;
372 luma_lpf = 2;
373 if (std & V4L2_STD_PAL) {
374 uv_lpf = 1;
375 comb = 0x20;
376 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
377 sc = 688700;
378 } else if (std == V4L2_STD_PAL_Nc) {
379 uv_lpf = 1;
380 comb = 0x20;
381 /* sc = 3582056.25 * src_decimation/28636360 * 2^13 */
382 sc = 556422;
383 } else { /* SECAM */
384 uv_lpf = 0;
385 comb = 0;
386 /* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */
387 /* sc = 4328130 * src_decimation/28636360 * 2^13 */
388 sc = 672314;
389 }
390 } else {
391 /*
392 * The following relationships of half line counts should hold:
393 * 525 = prevsync + vblank656 + vactive
394 * 12 = vblank656 - vblank = vsync pulses + equalization pulses
395 *
396 * prevsync: 6 half-lines before the vsync pulses
397 * vblank656: half lines, after line 3/mid-266, of blanked video
398 * vblank: half lines, after line 9/272, of blanked video
399 * vactive: half lines of active video
400 *
401 * As far as I can tell:
402 * vblank656 starts counting from the falling edge of the first
403 * vsync pulse (start of line 4 or mid-266)
404 * vblank starts counting from the after the 6 vsync pulses and
405 * 6 or 5 equalization pulses (start of line 10 or 272)
406 *
407 * For 525 line systems the driver will extract VBI information
408 * from lines 10-21 and lines 273-284.
409 */
410 vblank656 = 38; /* lines 4 - 22 & 266 - 284 */
411 vblank = 26; /* lines 10 - 22 & 272 - 284 */
412 vactive = 481; /* lines 23 - 263 & 285 - 525 */
413
414 /*
415 * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is
416 * is 858 pixels = 720 active + 138 blanking. The Hsync leading
417 * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the
418 * end of active video, leaving 122 pixels of hblank to ignore
419 * before active video starts.
420 */
421 hactive = 720;
422 hblank = 122;
423 luma_lpf = 1;
424 uv_lpf = 1;
425
426 /*
427 * Burst gate delay (for 525 line systems)
428 * Hsync leading edge to color burst rise = 5.3 us
429 * Color burst width = 2.5 us
430 * Gate width = 4 pixel clocks
431 * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks
432 */
433 if (std == V4L2_STD_PAL_60) {
434 burst = 90;
435 luma_lpf = 2;
436 comb = 0x20;
437 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */
438 sc = 688700;
439 } else if (std == V4L2_STD_PAL_M) {
440 /* The 97 needs to be verified against PAL-M timings */
441 burst = 97;
442 comb = 0x20;
443 /* sc = 3575611.49 * src_decimation/28636360 * 2^13 */
444 sc = 555421;
445 } else {
446 burst = 90;
447 comb = 0x66;
448 /* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */
449 sc = 556032;
450 }
451 }
452
453 /* DEBUG: Displays configured PLL frequency */
454 pll_int = cx18_av_read(cx, 0x108);
455 pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff;
456 pll_post = cx18_av_read(cx, 0x109);
457 CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n",
458 pll_int, pll_frac, pll_post);
459
460 if (pll_post) {
461 int fsc, pll;
462 u64 tmp;
463
464 pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25;
465 pll /= pll_post;
466 CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n",
467 pll / 1000000, pll % 1000000);
468 CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
469 pll / 8000000, (pll / 8) % 1000000);
470
471 CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio "
472 "= %d.%03d\n", src_decimation / 256,
473 ((src_decimation % 256) * 1000) / 256);
474
475 tmp = 28636360 * (u64) sc;
476 do_div(tmp, src_decimation);
477 fsc = tmp >> 13;
478 CX18_DEBUG_INFO_DEV(sd,
479 "Chroma sub-carrier initial freq = %d.%06d "
480 "MHz\n", fsc / 1000000, fsc % 1000000);
481
482 CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, "
483 "vactive %i, vblank656 %i, src_dec %i, "
484 "burst 0x%02x, luma_lpf %i, uv_lpf %i, "
485 "comb 0x%02x, sc 0x%06x\n",
486 hblank, hactive, vblank, vactive, vblank656,
487 src_decimation, burst, luma_lpf, uv_lpf,
488 comb, sc);
489 }
490
491 /* Sets horizontal blanking delay and active lines */
492 cx18_av_write(cx, 0x470, hblank);
493 cx18_av_write(cx, 0x471,
494 (((hblank >> 8) & 0x3) | (hactive << 4)) & 0xff);
495 cx18_av_write(cx, 0x472, hactive >> 4);
496
497 /* Sets burst gate delay */
498 cx18_av_write(cx, 0x473, burst);
499
500 /* Sets vertical blanking delay and active duration */
501 cx18_av_write(cx, 0x474, vblank);
502 cx18_av_write(cx, 0x475,
503 (((vblank >> 8) & 0x3) | (vactive << 4)) & 0xff);
504 cx18_av_write(cx, 0x476, vactive >> 4);
505 cx18_av_write(cx, 0x477, vblank656);
506
507 /* Sets src decimation rate */
508 cx18_av_write(cx, 0x478, src_decimation & 0xff);
509 cx18_av_write(cx, 0x479, (src_decimation >> 8) & 0xff);
510
511 /* Sets Luma and UV Low pass filters */
512 cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
513
514 /* Enables comb filters */
515 cx18_av_write(cx, 0x47b, comb);
516
517 /* Sets SC Step*/
518 cx18_av_write(cx, 0x47c, sc);
519 cx18_av_write(cx, 0x47d, (sc >> 8) & 0xff);
520 cx18_av_write(cx, 0x47e, (sc >> 16) & 0xff);
521
522 if (std & V4L2_STD_625_50) {
523 state->slicer_line_delay = 1;
524 state->slicer_line_offset = (6 + state->slicer_line_delay - 2);
525 } else {
526 state->slicer_line_delay = 0;
527 state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
528 }
529 cx18_av_write(cx, 0x47f, state->slicer_line_delay);
530 }
531
input_change(struct cx18 * cx)532 static void input_change(struct cx18 *cx)
533 {
534 struct cx18_av_state *state = &cx->av_state;
535 v4l2_std_id std = state->std;
536 u8 v;
537
538 /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */
539 cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
540 cx18_av_and_or(cx, 0x401, ~0x60, 0);
541 cx18_av_and_or(cx, 0x401, ~0x60, 0x60);
542
543 if (std & V4L2_STD_525_60) {
544 if (std == V4L2_STD_NTSC_M_JP) {
545 /* Japan uses EIAJ audio standard */
546 cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff);
547 cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f);
548 } else if (std == V4L2_STD_NTSC_M_KR) {
549 /* South Korea uses A2 audio standard */
550 cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff);
551 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
552 } else {
553 /* Others use the BTSC audio standard */
554 cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff);
555 cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f);
556 }
557 } else if (std & V4L2_STD_PAL) {
558 /* Follow tuner change procedure for PAL */
559 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
560 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
561 } else if (std & V4L2_STD_SECAM) {
562 /* Select autodetect for SECAM */
563 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff);
564 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f);
565 }
566
567 v = cx18_av_read(cx, 0x803);
568 if (v & 0x10) {
569 /* restart audio decoder microcontroller */
570 v &= ~0x10;
571 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
572 v |= 0x10;
573 cx18_av_write_expect(cx, 0x803, v, v, 0x1f);
574 }
575 }
576
cx18_av_s_frequency(struct v4l2_subdev * sd,const struct v4l2_frequency * freq)577 static int cx18_av_s_frequency(struct v4l2_subdev *sd,
578 const struct v4l2_frequency *freq)
579 {
580 struct cx18 *cx = v4l2_get_subdevdata(sd);
581 input_change(cx);
582 return 0;
583 }
584
set_input(struct cx18 * cx,enum cx18_av_video_input vid_input,enum cx18_av_audio_input aud_input)585 static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
586 enum cx18_av_audio_input aud_input)
587 {
588 struct cx18_av_state *state = &cx->av_state;
589 struct v4l2_subdev *sd = &state->sd;
590
591 enum analog_signal_type {
592 NONE, CVBS, Y, C, SIF, Pb, Pr
593 } ch[3] = {NONE, NONE, NONE};
594
595 u8 afe_mux_cfg;
596 u8 adc2_cfg;
597 u8 input_mode;
598 u32 afe_cfg;
599 int i;
600
601 CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n",
602 vid_input, aud_input);
603
604 if (vid_input >= CX18_AV_COMPOSITE1 &&
605 vid_input <= CX18_AV_COMPOSITE8) {
606 afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
607 ch[0] = CVBS;
608 input_mode = 0x0;
609 } else if (vid_input >= CX18_AV_COMPONENT_LUMA1) {
610 int luma = vid_input & 0xf000;
611 int r_chroma = vid_input & 0xf0000;
612 int b_chroma = vid_input & 0xf00000;
613
614 if ((vid_input & ~0xfff000) ||
615 luma < CX18_AV_COMPONENT_LUMA1 ||
616 luma > CX18_AV_COMPONENT_LUMA8 ||
617 r_chroma < CX18_AV_COMPONENT_R_CHROMA4 ||
618 r_chroma > CX18_AV_COMPONENT_R_CHROMA6 ||
619 b_chroma < CX18_AV_COMPONENT_B_CHROMA7 ||
620 b_chroma > CX18_AV_COMPONENT_B_CHROMA8) {
621 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
622 vid_input);
623 return -EINVAL;
624 }
625 afe_mux_cfg = (luma - CX18_AV_COMPONENT_LUMA1) >> 12;
626 ch[0] = Y;
627 afe_mux_cfg |= (r_chroma - CX18_AV_COMPONENT_R_CHROMA4) >> 12;
628 ch[1] = Pr;
629 afe_mux_cfg |= (b_chroma - CX18_AV_COMPONENT_B_CHROMA7) >> 14;
630 ch[2] = Pb;
631 input_mode = 0x6;
632 } else {
633 int luma = vid_input & 0xf0;
634 int chroma = vid_input & 0xf00;
635
636 if ((vid_input & ~0xff0) ||
637 luma < CX18_AV_SVIDEO_LUMA1 ||
638 luma > CX18_AV_SVIDEO_LUMA8 ||
639 chroma < CX18_AV_SVIDEO_CHROMA4 ||
640 chroma > CX18_AV_SVIDEO_CHROMA8) {
641 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n",
642 vid_input);
643 return -EINVAL;
644 }
645 afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
646 ch[0] = Y;
647 if (chroma >= CX18_AV_SVIDEO_CHROMA7) {
648 afe_mux_cfg &= 0x3f;
649 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2;
650 ch[2] = C;
651 } else {
652 afe_mux_cfg &= 0xcf;
653 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4;
654 ch[1] = C;
655 }
656 input_mode = 0x2;
657 }
658
659 switch (aud_input) {
660 case CX18_AV_AUDIO_SERIAL1:
661 case CX18_AV_AUDIO_SERIAL2:
662 /* do nothing, use serial audio input */
663 break;
664 case CX18_AV_AUDIO4:
665 afe_mux_cfg &= ~0x30;
666 ch[1] = SIF;
667 break;
668 case CX18_AV_AUDIO5:
669 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10;
670 ch[1] = SIF;
671 break;
672 case CX18_AV_AUDIO6:
673 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20;
674 ch[1] = SIF;
675 break;
676 case CX18_AV_AUDIO7:
677 afe_mux_cfg &= ~0xc0;
678 ch[2] = SIF;
679 break;
680 case CX18_AV_AUDIO8:
681 afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40;
682 ch[2] = SIF;
683 break;
684
685 default:
686 CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n",
687 aud_input);
688 return -EINVAL;
689 }
690
691 /* Set up analog front end multiplexers */
692 cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7);
693 /* Set INPUT_MODE to Composite, S-Video, or Component */
694 cx18_av_and_or(cx, 0x401, ~0x6, input_mode);
695
696 /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
697 adc2_cfg = cx18_av_read(cx, 0x102);
698 if (ch[2] == NONE)
699 adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */
700 else
701 adc2_cfg |= 0x2; /* Signal on CH3, set ADC2 to CH3 for input */
702
703 /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */
704 if (ch[1] != NONE && ch[2] != NONE)
705 adc2_cfg |= 0x4; /* Set dual mode */
706 else
707 adc2_cfg &= ~0x4; /* Clear dual mode */
708 cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17);
709
710 /* Configure the analog front end */
711 afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL);
712 afe_cfg &= 0xff000000;
713 afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */
714 if (ch[1] != NONE && ch[2] != NONE)
715 afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */
716
717 for (i = 0; i < 3; i++) {
718 switch (ch[i]) {
719 default:
720 case NONE:
721 /* CLAMP_SEL = Fixed to midcode clamp level */
722 afe_cfg |= (0x00000200 << i);
723 break;
724 case CVBS:
725 case Y:
726 if (i > 0)
727 afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */
728 break;
729 case C:
730 case Pb:
731 case Pr:
732 /* CLAMP_SEL = Fixed to midcode clamp level */
733 afe_cfg |= (0x00000200 << i);
734 if (i == 0 && ch[i] == C)
735 afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */
736 break;
737 case SIF:
738 /*
739 * VGA_GAIN_SEL = Audio Decoder
740 * CLAMP_SEL = Fixed to midcode clamp level
741 */
742 afe_cfg |= (0x00000240 << i);
743 if (i == 0)
744 afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */
745 break;
746 }
747 }
748
749 cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg);
750
751 state->vid_input = vid_input;
752 state->aud_input = aud_input;
753 cx18_av_audio_set_path(cx);
754 input_change(cx);
755 return 0;
756 }
757
cx18_av_s_video_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)758 static int cx18_av_s_video_routing(struct v4l2_subdev *sd,
759 u32 input, u32 output, u32 config)
760 {
761 struct cx18_av_state *state = to_cx18_av_state(sd);
762 struct cx18 *cx = v4l2_get_subdevdata(sd);
763 return set_input(cx, input, state->aud_input);
764 }
765
cx18_av_s_audio_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)766 static int cx18_av_s_audio_routing(struct v4l2_subdev *sd,
767 u32 input, u32 output, u32 config)
768 {
769 struct cx18_av_state *state = to_cx18_av_state(sd);
770 struct cx18 *cx = v4l2_get_subdevdata(sd);
771 return set_input(cx, state->vid_input, input);
772 }
773
cx18_av_g_tuner(struct v4l2_subdev * sd,struct v4l2_tuner * vt)774 static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
775 {
776 struct cx18_av_state *state = to_cx18_av_state(sd);
777 struct cx18 *cx = v4l2_get_subdevdata(sd);
778 u8 vpres;
779 u8 mode;
780 int val = 0;
781
782 if (state->radio)
783 return 0;
784
785 vpres = cx18_av_read(cx, 0x40e) & 0x20;
786 vt->signal = vpres ? 0xffff : 0x0;
787
788 vt->capability |=
789 V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
790 V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
791
792 mode = cx18_av_read(cx, 0x804);
793
794 /* get rxsubchans and audmode */
795 if ((mode & 0xf) == 1)
796 val |= V4L2_TUNER_SUB_STEREO;
797 else
798 val |= V4L2_TUNER_SUB_MONO;
799
800 if (mode == 2 || mode == 4)
801 val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
802
803 if (mode & 0x10)
804 val |= V4L2_TUNER_SUB_SAP;
805
806 vt->rxsubchans = val;
807 vt->audmode = state->audmode;
808 return 0;
809 }
810
cx18_av_s_tuner(struct v4l2_subdev * sd,const struct v4l2_tuner * vt)811 static int cx18_av_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt)
812 {
813 struct cx18_av_state *state = to_cx18_av_state(sd);
814 struct cx18 *cx = v4l2_get_subdevdata(sd);
815 u8 v;
816
817 if (state->radio)
818 return 0;
819
820 v = cx18_av_read(cx, 0x809);
821 v &= ~0xf;
822
823 switch (vt->audmode) {
824 case V4L2_TUNER_MODE_MONO:
825 /* mono -> mono
826 stereo -> mono
827 bilingual -> lang1 */
828 break;
829 case V4L2_TUNER_MODE_STEREO:
830 case V4L2_TUNER_MODE_LANG1:
831 /* mono -> mono
832 stereo -> stereo
833 bilingual -> lang1 */
834 v |= 0x4;
835 break;
836 case V4L2_TUNER_MODE_LANG1_LANG2:
837 /* mono -> mono
838 stereo -> stereo
839 bilingual -> lang1/lang2 */
840 v |= 0x7;
841 break;
842 case V4L2_TUNER_MODE_LANG2:
843 /* mono -> mono
844 stereo -> stereo
845 bilingual -> lang2 */
846 v |= 0x1;
847 break;
848 default:
849 return -EINVAL;
850 }
851 cx18_av_write_expect(cx, 0x809, v, v, 0xff);
852 state->audmode = vt->audmode;
853 return 0;
854 }
855
cx18_av_s_std(struct v4l2_subdev * sd,v4l2_std_id norm)856 static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
857 {
858 struct cx18_av_state *state = to_cx18_av_state(sd);
859 struct cx18 *cx = v4l2_get_subdevdata(sd);
860
861 u8 fmt = 0; /* zero is autodetect */
862 u8 pal_m = 0;
863
864 if (state->radio == 0 && state->std == norm)
865 return 0;
866
867 state->radio = 0;
868 state->std = norm;
869
870 /* First tests should be against specific std */
871 if (state->std == V4L2_STD_NTSC_M_JP) {
872 fmt = 0x2;
873 } else if (state->std == V4L2_STD_NTSC_443) {
874 fmt = 0x3;
875 } else if (state->std == V4L2_STD_PAL_M) {
876 pal_m = 1;
877 fmt = 0x5;
878 } else if (state->std == V4L2_STD_PAL_N) {
879 fmt = 0x6;
880 } else if (state->std == V4L2_STD_PAL_Nc) {
881 fmt = 0x7;
882 } else if (state->std == V4L2_STD_PAL_60) {
883 fmt = 0x8;
884 } else {
885 /* Then, test against generic ones */
886 if (state->std & V4L2_STD_NTSC)
887 fmt = 0x1;
888 else if (state->std & V4L2_STD_PAL)
889 fmt = 0x4;
890 else if (state->std & V4L2_STD_SECAM)
891 fmt = 0xc;
892 }
893
894 CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt);
895
896 /* Follow step 9 of section 3.16 in the cx18_av datasheet.
897 Without this PAL may display a vertical ghosting effect.
898 This happens for example with the Yuan MPC622. */
899 if (fmt >= 4 && fmt < 8) {
900 /* Set format to NTSC-M */
901 cx18_av_and_or(cx, 0x400, ~0xf, 1);
902 /* Turn off LCOMB */
903 cx18_av_and_or(cx, 0x47b, ~6, 0);
904 }
905 cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20);
906 cx18_av_and_or(cx, 0x403, ~0x3, pal_m);
907 cx18_av_std_setup(cx);
908 input_change(cx);
909 return 0;
910 }
911
cx18_av_s_radio(struct v4l2_subdev * sd)912 static int cx18_av_s_radio(struct v4l2_subdev *sd)
913 {
914 struct cx18_av_state *state = to_cx18_av_state(sd);
915 state->radio = 1;
916 return 0;
917 }
918
cx18_av_s_ctrl(struct v4l2_ctrl * ctrl)919 static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl)
920 {
921 struct v4l2_subdev *sd = to_sd(ctrl);
922 struct cx18 *cx = v4l2_get_subdevdata(sd);
923
924 switch (ctrl->id) {
925 case V4L2_CID_BRIGHTNESS:
926 cx18_av_write(cx, 0x414, ctrl->val - 128);
927 break;
928
929 case V4L2_CID_CONTRAST:
930 cx18_av_write(cx, 0x415, ctrl->val << 1);
931 break;
932
933 case V4L2_CID_SATURATION:
934 cx18_av_write(cx, 0x420, ctrl->val << 1);
935 cx18_av_write(cx, 0x421, ctrl->val << 1);
936 break;
937
938 case V4L2_CID_HUE:
939 cx18_av_write(cx, 0x422, ctrl->val);
940 break;
941
942 default:
943 return -EINVAL;
944 }
945 return 0;
946 }
947
cx18_av_set_fmt(struct v4l2_subdev * sd,struct v4l2_subdev_pad_config * cfg,struct v4l2_subdev_format * format)948 static int cx18_av_set_fmt(struct v4l2_subdev *sd,
949 struct v4l2_subdev_pad_config *cfg,
950 struct v4l2_subdev_format *format)
951 {
952 struct v4l2_mbus_framefmt *fmt = &format->format;
953 struct cx18_av_state *state = to_cx18_av_state(sd);
954 struct cx18 *cx = v4l2_get_subdevdata(sd);
955 int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
956 int is_50Hz = !(state->std & V4L2_STD_525_60);
957
958 if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED)
959 return -EINVAL;
960
961 fmt->field = V4L2_FIELD_INTERLACED;
962 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
963
964 Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4;
965 Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4;
966
967 Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
968 Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
969
970 /*
971 * This adjustment reflects the excess of vactive, set in
972 * cx18_av_std_setup(), above standard values:
973 *
974 * 480 + 1 for 60 Hz systems
975 * 576 + 3 for 50 Hz systems
976 */
977 Vlines = fmt->height + (is_50Hz ? 3 : 1);
978
979 /*
980 * Invalid height and width scaling requests are:
981 * 1. width less than 1/16 of the source width
982 * 2. width greater than the source width
983 * 3. height less than 1/8 of the source height
984 * 4. height greater than the source height
985 */
986 if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
987 (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
988 CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
989 fmt->width, fmt->height);
990 return -ERANGE;
991 }
992
993 if (format->which == V4L2_SUBDEV_FORMAT_TRY)
994 return 0;
995
996 HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
997 VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
998 VSC &= 0x1fff;
999
1000 if (fmt->width >= 385)
1001 filter = 0;
1002 else if (fmt->width > 192)
1003 filter = 1;
1004 else if (fmt->width > 96)
1005 filter = 2;
1006 else
1007 filter = 3;
1008
1009 CX18_DEBUG_INFO_DEV(sd,
1010 "decoder set size %dx%d -> scale %ux%u\n",
1011 fmt->width, fmt->height, HSC, VSC);
1012
1013 /* HSCALE=HSC */
1014 cx18_av_write(cx, 0x418, HSC & 0xff);
1015 cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff);
1016 cx18_av_write(cx, 0x41a, HSC >> 16);
1017 /* VSCALE=VSC */
1018 cx18_av_write(cx, 0x41c, VSC & 0xff);
1019 cx18_av_write(cx, 0x41d, VSC >> 8);
1020 /* VS_INTRLACE=1 VFILT=filter */
1021 cx18_av_write(cx, 0x41e, 0x8 | filter);
1022 return 0;
1023 }
1024
cx18_av_s_stream(struct v4l2_subdev * sd,int enable)1025 static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable)
1026 {
1027 struct cx18 *cx = v4l2_get_subdevdata(sd);
1028
1029 CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable");
1030 if (enable) {
1031 cx18_av_write(cx, 0x115, 0x8c);
1032 cx18_av_write(cx, 0x116, 0x07);
1033 } else {
1034 cx18_av_write(cx, 0x115, 0x00);
1035 cx18_av_write(cx, 0x116, 0x00);
1036 }
1037 return 0;
1038 }
1039
log_video_status(struct cx18 * cx)1040 static void log_video_status(struct cx18 *cx)
1041 {
1042 static const char *const fmt_strs[] = {
1043 "0x0",
1044 "NTSC-M", "NTSC-J", "NTSC-4.43",
1045 "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60",
1046 "0x9", "0xA", "0xB",
1047 "SECAM",
1048 "0xD", "0xE", "0xF"
1049 };
1050
1051 struct cx18_av_state *state = &cx->av_state;
1052 struct v4l2_subdev *sd = &state->sd;
1053 u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf;
1054 u8 gen_stat1 = cx18_av_read(cx, 0x40d);
1055 u8 gen_stat2 = cx18_av_read(cx, 0x40e);
1056 int vid_input = state->vid_input;
1057
1058 CX18_INFO_DEV(sd, "Video signal: %spresent\n",
1059 (gen_stat2 & 0x20) ? "" : "not ");
1060 CX18_INFO_DEV(sd, "Detected format: %s\n",
1061 fmt_strs[gen_stat1 & 0xf]);
1062
1063 CX18_INFO_DEV(sd, "Specified standard: %s\n",
1064 vidfmt_sel ? fmt_strs[vidfmt_sel]
1065 : "automatic detection");
1066
1067 if (vid_input >= CX18_AV_COMPOSITE1 &&
1068 vid_input <= CX18_AV_COMPOSITE8) {
1069 CX18_INFO_DEV(sd, "Specified video input: Composite %d\n",
1070 vid_input - CX18_AV_COMPOSITE1 + 1);
1071 } else {
1072 CX18_INFO_DEV(sd, "Specified video input: "
1073 "S-Video (Luma In%d, Chroma In%d)\n",
1074 (vid_input & 0xf0) >> 4,
1075 (vid_input & 0xf00) >> 8);
1076 }
1077
1078 CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n",
1079 state->audclk_freq);
1080 }
1081
log_audio_status(struct cx18 * cx)1082 static void log_audio_status(struct cx18 *cx)
1083 {
1084 struct cx18_av_state *state = &cx->av_state;
1085 struct v4l2_subdev *sd = &state->sd;
1086 u8 download_ctl = cx18_av_read(cx, 0x803);
1087 u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
1088 u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
1089 u8 audio_config = cx18_av_read(cx, 0x808);
1090 u8 pref_mode = cx18_av_read(cx, 0x809);
1091 u8 afc0 = cx18_av_read(cx, 0x80b);
1092 u8 mute_ctl = cx18_av_read(cx, 0x8d3);
1093 int aud_input = state->aud_input;
1094 char *p;
1095
1096 switch (mod_det_stat0) {
1097 case 0x00: p = "mono"; break;
1098 case 0x01: p = "stereo"; break;
1099 case 0x02: p = "dual"; break;
1100 case 0x04: p = "tri"; break;
1101 case 0x10: p = "mono with SAP"; break;
1102 case 0x11: p = "stereo with SAP"; break;
1103 case 0x12: p = "dual with SAP"; break;
1104 case 0x14: p = "tri with SAP"; break;
1105 case 0xfe: p = "forced mode"; break;
1106 default: p = "not defined"; break;
1107 }
1108 CX18_INFO_DEV(sd, "Detected audio mode: %s\n", p);
1109
1110 switch (mod_det_stat1) {
1111 case 0x00: p = "not defined"; break;
1112 case 0x01: p = "EIAJ"; break;
1113 case 0x02: p = "A2-M"; break;
1114 case 0x03: p = "A2-BG"; break;
1115 case 0x04: p = "A2-DK1"; break;
1116 case 0x05: p = "A2-DK2"; break;
1117 case 0x06: p = "A2-DK3"; break;
1118 case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
1119 case 0x08: p = "AM-L"; break;
1120 case 0x09: p = "NICAM-BG"; break;
1121 case 0x0a: p = "NICAM-DK"; break;
1122 case 0x0b: p = "NICAM-I"; break;
1123 case 0x0c: p = "NICAM-L"; break;
1124 case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
1125 case 0x0e: p = "IF FM Radio"; break;
1126 case 0x0f: p = "BTSC"; break;
1127 case 0x10: p = "detected chrominance"; break;
1128 case 0xfd: p = "unknown audio standard"; break;
1129 case 0xfe: p = "forced audio standard"; break;
1130 case 0xff: p = "no detected audio standard"; break;
1131 default: p = "not defined"; break;
1132 }
1133 CX18_INFO_DEV(sd, "Detected audio standard: %s\n", p);
1134 CX18_INFO_DEV(sd, "Audio muted: %s\n",
1135 (mute_ctl & 0x2) ? "yes" : "no");
1136 CX18_INFO_DEV(sd, "Audio microcontroller: %s\n",
1137 (download_ctl & 0x10) ? "running" : "stopped");
1138
1139 switch (audio_config >> 4) {
1140 case 0x00: p = "undefined"; break;
1141 case 0x01: p = "BTSC"; break;
1142 case 0x02: p = "EIAJ"; break;
1143 case 0x03: p = "A2-M"; break;
1144 case 0x04: p = "A2-BG"; break;
1145 case 0x05: p = "A2-DK1"; break;
1146 case 0x06: p = "A2-DK2"; break;
1147 case 0x07: p = "A2-DK3"; break;
1148 case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
1149 case 0x09: p = "AM-L"; break;
1150 case 0x0a: p = "NICAM-BG"; break;
1151 case 0x0b: p = "NICAM-DK"; break;
1152 case 0x0c: p = "NICAM-I"; break;
1153 case 0x0d: p = "NICAM-L"; break;
1154 case 0x0e: p = "FM radio"; break;
1155 case 0x0f: p = "automatic detection"; break;
1156 default: p = "undefined"; break;
1157 }
1158 CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p);
1159
1160 if ((audio_config >> 4) < 0xF) {
1161 switch (audio_config & 0xF) {
1162 case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break;
1163 case 0x01: p = "MONO2 (LANGUAGE B)"; break;
1164 case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
1165 case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
1166 case 0x04: p = "STEREO"; break;
1167 case 0x05: p = "DUAL1 (AC)"; break;
1168 case 0x06: p = "DUAL2 (BC)"; break;
1169 case 0x07: p = "DUAL3 (AB)"; break;
1170 default: p = "undefined";
1171 }
1172 CX18_INFO_DEV(sd, "Configured audio mode: %s\n", p);
1173 } else {
1174 switch (audio_config & 0xF) {
1175 case 0x00: p = "BG"; break;
1176 case 0x01: p = "DK1"; break;
1177 case 0x02: p = "DK2"; break;
1178 case 0x03: p = "DK3"; break;
1179 case 0x04: p = "I"; break;
1180 case 0x05: p = "L"; break;
1181 case 0x06: p = "BTSC"; break;
1182 case 0x07: p = "EIAJ"; break;
1183 case 0x08: p = "A2-M"; break;
1184 case 0x09: p = "FM Radio (4.5 MHz)"; break;
1185 case 0x0a: p = "FM Radio (5.5 MHz)"; break;
1186 case 0x0b: p = "S-Video"; break;
1187 case 0x0f: p = "automatic standard and mode detection"; break;
1188 default: p = "undefined"; break;
1189 }
1190 CX18_INFO_DEV(sd, "Configured audio system: %s\n", p);
1191 }
1192
1193 if (aud_input)
1194 CX18_INFO_DEV(sd, "Specified audio input: Tuner (In%d)\n",
1195 aud_input);
1196 else
1197 CX18_INFO_DEV(sd, "Specified audio input: External\n");
1198
1199 switch (pref_mode & 0xf) {
1200 case 0: p = "mono/language A"; break;
1201 case 1: p = "language B"; break;
1202 case 2: p = "language C"; break;
1203 case 3: p = "analog fallback"; break;
1204 case 4: p = "stereo"; break;
1205 case 5: p = "language AC"; break;
1206 case 6: p = "language BC"; break;
1207 case 7: p = "language AB"; break;
1208 default: p = "undefined"; break;
1209 }
1210 CX18_INFO_DEV(sd, "Preferred audio mode: %s\n", p);
1211
1212 if ((audio_config & 0xf) == 0xf) {
1213 switch ((afc0 >> 3) & 0x1) {
1214 case 0: p = "system DK"; break;
1215 case 1: p = "system L"; break;
1216 }
1217 CX18_INFO_DEV(sd, "Selected 65 MHz format: %s\n", p);
1218
1219 switch (afc0 & 0x7) {
1220 case 0: p = "Chroma"; break;
1221 case 1: p = "BTSC"; break;
1222 case 2: p = "EIAJ"; break;
1223 case 3: p = "A2-M"; break;
1224 case 4: p = "autodetect"; break;
1225 default: p = "undefined"; break;
1226 }
1227 CX18_INFO_DEV(sd, "Selected 45 MHz format: %s\n", p);
1228 }
1229 }
1230
cx18_av_log_status(struct v4l2_subdev * sd)1231 static int cx18_av_log_status(struct v4l2_subdev *sd)
1232 {
1233 struct cx18 *cx = v4l2_get_subdevdata(sd);
1234 log_video_status(cx);
1235 log_audio_status(cx);
1236 return 0;
1237 }
1238
1239 #ifdef CONFIG_VIDEO_ADV_DEBUG
cx18_av_g_register(struct v4l2_subdev * sd,struct v4l2_dbg_register * reg)1240 static int cx18_av_g_register(struct v4l2_subdev *sd,
1241 struct v4l2_dbg_register *reg)
1242 {
1243 struct cx18 *cx = v4l2_get_subdevdata(sd);
1244
1245 if ((reg->reg & 0x3) != 0)
1246 return -EINVAL;
1247 reg->size = 4;
1248 reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc);
1249 return 0;
1250 }
1251
cx18_av_s_register(struct v4l2_subdev * sd,const struct v4l2_dbg_register * reg)1252 static int cx18_av_s_register(struct v4l2_subdev *sd,
1253 const struct v4l2_dbg_register *reg)
1254 {
1255 struct cx18 *cx = v4l2_get_subdevdata(sd);
1256
1257 if ((reg->reg & 0x3) != 0)
1258 return -EINVAL;
1259 cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val);
1260 return 0;
1261 }
1262 #endif
1263
1264 static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = {
1265 .s_ctrl = cx18_av_s_ctrl,
1266 };
1267
1268 static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
1269 .log_status = cx18_av_log_status,
1270 .load_fw = cx18_av_load_fw,
1271 .reset = cx18_av_reset,
1272 #ifdef CONFIG_VIDEO_ADV_DEBUG
1273 .g_register = cx18_av_g_register,
1274 .s_register = cx18_av_s_register,
1275 #endif
1276 };
1277
1278 static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = {
1279 .s_radio = cx18_av_s_radio,
1280 .s_frequency = cx18_av_s_frequency,
1281 .g_tuner = cx18_av_g_tuner,
1282 .s_tuner = cx18_av_s_tuner,
1283 };
1284
1285 static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = {
1286 .s_clock_freq = cx18_av_s_clock_freq,
1287 .s_routing = cx18_av_s_audio_routing,
1288 };
1289
1290 static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
1291 .s_std = cx18_av_s_std,
1292 .s_routing = cx18_av_s_video_routing,
1293 .s_stream = cx18_av_s_stream,
1294 };
1295
1296 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = {
1297 .decode_vbi_line = cx18_av_decode_vbi_line,
1298 .g_sliced_fmt = cx18_av_g_sliced_fmt,
1299 .s_sliced_fmt = cx18_av_s_sliced_fmt,
1300 .s_raw_fmt = cx18_av_s_raw_fmt,
1301 };
1302
1303 static const struct v4l2_subdev_pad_ops cx18_av_pad_ops = {
1304 .set_fmt = cx18_av_set_fmt,
1305 };
1306
1307 static const struct v4l2_subdev_ops cx18_av_ops = {
1308 .core = &cx18_av_general_ops,
1309 .tuner = &cx18_av_tuner_ops,
1310 .audio = &cx18_av_audio_ops,
1311 .video = &cx18_av_video_ops,
1312 .vbi = &cx18_av_vbi_ops,
1313 .pad = &cx18_av_pad_ops,
1314 };
1315
cx18_av_probe(struct cx18 * cx)1316 int cx18_av_probe(struct cx18 *cx)
1317 {
1318 struct cx18_av_state *state = &cx->av_state;
1319 struct v4l2_subdev *sd;
1320 int err;
1321
1322 state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
1323
1324 state->vid_input = CX18_AV_COMPOSITE7;
1325 state->aud_input = CX18_AV_AUDIO8;
1326 state->audclk_freq = 48000;
1327 state->audmode = V4L2_TUNER_MODE_LANG1;
1328 state->slicer_line_delay = 0;
1329 state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
1330
1331 sd = &state->sd;
1332 v4l2_subdev_init(sd, &cx18_av_ops);
1333 v4l2_set_subdevdata(sd, cx);
1334 snprintf(sd->name, sizeof(sd->name),
1335 "%s %03x", cx->v4l2_dev.name, (state->rev >> 4));
1336 sd->grp_id = CX18_HW_418_AV;
1337 v4l2_ctrl_handler_init(&state->hdl, 9);
1338 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1339 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1340 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1341 V4L2_CID_CONTRAST, 0, 127, 1, 64);
1342 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1343 V4L2_CID_SATURATION, 0, 127, 1, 64);
1344 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops,
1345 V4L2_CID_HUE, -128, 127, 1, 0);
1346
1347 state->volume = v4l2_ctrl_new_std(&state->hdl,
1348 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
1349 0, 65535, 65535 / 100, 0);
1350 v4l2_ctrl_new_std(&state->hdl,
1351 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
1352 0, 1, 1, 0);
1353 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1354 V4L2_CID_AUDIO_BALANCE,
1355 0, 65535, 65535 / 100, 32768);
1356 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1357 V4L2_CID_AUDIO_BASS,
1358 0, 65535, 65535 / 100, 32768);
1359 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops,
1360 V4L2_CID_AUDIO_TREBLE,
1361 0, 65535, 65535 / 100, 32768);
1362 sd->ctrl_handler = &state->hdl;
1363 if (state->hdl.error) {
1364 int err = state->hdl.error;
1365
1366 v4l2_ctrl_handler_free(&state->hdl);
1367 return err;
1368 }
1369 err = v4l2_device_register_subdev(&cx->v4l2_dev, sd);
1370 if (err)
1371 v4l2_ctrl_handler_free(&state->hdl);
1372 else
1373 cx18_av_init(cx);
1374 return err;
1375 }
1376