1menu "Infrared-port device drivers" 2 depends on IRDA!=n 3 4comment "SIR device drivers" 5 6config IRTTY_SIR 7 tristate "IrTTY (uses Linux serial driver)" 8 depends on IRDA && TTY 9 help 10 Say Y here if you want to build support for the IrTTY line 11 discipline. To compile it as a module, choose M here: the module 12 will be called irtty-sir. IrTTY makes it possible to use Linux's 13 own serial driver for all IrDA ports that are 16550 compatible. 14 Most IrDA chips are 16550 compatible so you should probably say Y 15 to this option. Using IrTTY will however limit the speed of the 16 connection to 115200 bps (IrDA SIR mode). 17 18 If unsure, say Y. 19 20config BFIN_SIR 21 tristate "Blackfin SIR on UART" 22 depends on BLACKFIN && IRDA 23 default n 24 help 25 Say Y here if your want to enable SIR function on Blackfin UART 26 devices. 27 28 To activate this driver you can start irattach like: 29 "irattach irda0 -s" 30 31 Saying M, it will be built as a module named bfin_sir. 32 33 Note that you need to turn off one of the serial drivers for SIR 34 to use that UART. 35 36config BFIN_SIR0 37 bool "Blackfin SIR on UART0" 38 depends on BFIN_SIR && !SERIAL_BFIN_UART0 39 40config BFIN_SIR1 41 bool "Blackfin SIR on UART1" 42 depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561) 43 44config BFIN_SIR2 45 bool "Blackfin SIR on UART2" 46 depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539) 47 48config BFIN_SIR3 49 bool "Blackfin SIR on UART3" 50 depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x) 51 52choice 53 prompt "SIR Mode" 54 depends on BFIN_SIR 55 default SIR_BFIN_DMA 56 57config SIR_BFIN_DMA 58 bool "DMA mode" 59 depends on !DMA_UNCACHED_NONE 60 61config SIR_BFIN_PIO 62 bool "PIO mode" 63endchoice 64 65config SH_SIR 66 tristate "SuperH SIR on UART" 67 depends on IRDA && SUPERH && \ 68 (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \ 69 CPU_SUBTYPE_SH7724) 70 default n 71 help 72 Say Y here if your want to enable SIR function on SuperH UART 73 devices. 74 75comment "Dongle support" 76 77config DONGLE 78 bool "Serial dongle support" 79 depends on IRTTY_SIR 80 help 81 Say Y here if you have an infrared device that connects to your 82 computer's serial port. These devices are called dongles. Then say Y 83 or M to the driver for your particular dongle below. 84 85 Note that the answer to this question won't directly affect the 86 kernel: saying N will just cause the configurator to skip all 87 the questions about serial dongles. 88 89config ESI_DONGLE 90 tristate "ESI JetEye PC dongle" 91 depends on IRTTY_SIR && DONGLE && IRDA 92 help 93 Say Y here if you want to build support for the Extended Systems 94 JetEye PC dongle. To compile it as a module, choose M here. The ESI 95 dongle attaches to the normal 9-pin serial port connector, and can 96 currently only be used by IrTTY. To activate support for ESI 97 dongles you will have to start irattach like this: 98 "irattach -d esi". 99 100config ACTISYS_DONGLE 101 tristate "ACTiSYS IR-220L and IR220L+ dongle" 102 depends on IRTTY_SIR && DONGLE && IRDA 103 help 104 Say Y here if you want to build support for the ACTiSYS IR-220L and 105 IR220L+ dongles. To compile it as a module, choose M here. The 106 ACTiSYS dongles attaches to the normal 9-pin serial port connector, 107 and can currently only be used by IrTTY. To activate support for 108 ACTiSYS dongles you will have to start irattach like this: 109 "irattach -d actisys" or "irattach -d actisys+". 110 111config TEKRAM_DONGLE 112 tristate "Tekram IrMate 210B dongle" 113 depends on IRTTY_SIR && DONGLE && IRDA 114 help 115 Say Y here if you want to build support for the Tekram IrMate 210B 116 dongle. To compile it as a module, choose M here. The Tekram dongle 117 attaches to the normal 9-pin serial port connector, and can 118 currently only be used by IrTTY. To activate support for Tekram 119 dongles you will have to start irattach like this: 120 "irattach -d tekram". 121 122config TOIM3232_DONGLE 123 tristate "TOIM3232 IrDa dongle" 124 depends on IRTTY_SIR && DONGLE && IRDA 125 help 126 Say Y here if you want to build support for the Vishay/Temic 127 TOIM3232 and TOIM4232 based dongles. 128 To compile it as a module, choose M here. 129 130config LITELINK_DONGLE 131 tristate "Parallax LiteLink dongle" 132 depends on IRTTY_SIR && DONGLE && IRDA 133 help 134 Say Y here if you want to build support for the Parallax Litelink 135 dongle. To compile it as a module, choose M here. The Parallax 136 dongle attaches to the normal 9-pin serial port connector, and can 137 currently only be used by IrTTY. To activate support for Parallax 138 dongles you will have to start irattach like this: 139 "irattach -d litelink". 140 141config MA600_DONGLE 142 tristate "Mobile Action MA600 dongle" 143 depends on IRTTY_SIR && DONGLE && IRDA 144 help 145 Say Y here if you want to build support for the Mobile Action MA600 146 dongle. To compile it as a module, choose M here. The MA600 dongle 147 attaches to the normal 9-pin serial port connector, and can 148 currently only be used by IrTTY. The driver should also support 149 the MA620 USB version of the dongle, if the integrated USB-to-RS232 150 converter is supported by usbserial. To activate support for 151 MA600 dongle you will have to start irattach like this: 152 "irattach -d ma600". 153 154config GIRBIL_DONGLE 155 tristate "Greenwich GIrBIL dongle" 156 depends on IRTTY_SIR && DONGLE && IRDA 157 help 158 Say Y here if you want to build support for the Greenwich GIrBIL 159 dongle. If you want to compile it as a module, choose M here. 160 The Greenwich dongle attaches to the normal 9-pin serial port 161 connector, and can currently only be used by IrTTY. To activate 162 support for Greenwich dongles you will have to start irattach 163 like this: "irattach -d girbil". 164 165config MCP2120_DONGLE 166 tristate "Microchip MCP2120" 167 depends on IRTTY_SIR && DONGLE && IRDA 168 help 169 Say Y here if you want to build support for the Microchip MCP2120 170 dongle. If you want to compile it as a module, choose M here. 171 The MCP2120 dongle attaches to the normal 9-pin serial port 172 connector, and can currently only be used by IrTTY. To activate 173 support for MCP2120 dongles you will have to start irattach 174 like this: "irattach -d mcp2120". 175 176 You must build this dongle yourself. For more information see: 177 <http://www.eyetap.org/~tangf/irda_sir_linux.html> 178 179config OLD_BELKIN_DONGLE 180 tristate "Old Belkin dongle" 181 depends on IRTTY_SIR && DONGLE && IRDA 182 help 183 Say Y here if you want to build support for the Adaptec Airport 1000 184 and 2000 dongles. If you want to compile it as a module, choose 185 M here. Some information is contained in the comments 186 at the top of <file:drivers/net/irda/old_belkin-sir.c>. 187 188config ACT200L_DONGLE 189 tristate "ACTiSYS IR-200L dongle" 190 depends on IRTTY_SIR && DONGLE && IRDA 191 help 192 Say Y here if you want to build support for the ACTiSYS IR-200L 193 dongle. If you want to compile it as a module, choose M here. 194 The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial 195 port connector, and can currently only be used by IrTTY. 196 To activate support for ACTiSYS IR-200L dongle you will have to 197 start irattach like this: "irattach -d act200l". 198 199config KINGSUN_DONGLE 200 tristate "KingSun/DonShine DS-620 IrDA-USB dongle" 201 depends on IRDA && USB 202 help 203 Say Y or M here if you want to build support for the KingSun/DonShine 204 DS-620 IrDA-USB bridge device driver. 205 206 This USB bridge does not conform to the IrDA-USB device class 207 specification, and therefore needs its own specific driver. This 208 dongle supports SIR speed only (9600 bps). 209 210 To compile it as a module, choose M here: the module will be called 211 kingsun-sir. 212 213config KSDAZZLE_DONGLE 214 tristate "KingSun Dazzle IrDA-USB dongle" 215 depends on IRDA && USB 216 help 217 Say Y or M here if you want to build support for the KingSun Dazzle 218 IrDA-USB bridge device driver. 219 220 This USB bridge does not conform to the IrDA-USB device class 221 specification, and therefore needs its own specific driver. This 222 dongle supports SIR speeds only (9600 through 115200 bps). 223 224 To compile it as a module, choose M here: the module will be called 225 ksdazzle-sir. 226 227config KS959_DONGLE 228 tristate "KingSun KS-959 IrDA-USB dongle" 229 depends on IRDA && USB 230 help 231 Say Y or M here if you want to build support for the KingSun KS-959 232 IrDA-USB bridge device driver. 233 234 This USB bridge does not conform to the IrDA-USB device class 235 specification, and therefore needs its own specific driver. This 236 dongle supports SIR speeds only (9600 through 57600 bps). 237 238 To compile it as a module, choose M here: the module will be called 239 ks959-sir. 240 241comment "FIR device drivers" 242 243config USB_IRDA 244 tristate "IrDA USB dongles" 245 depends on IRDA && USB 246 select FW_LOADER 247 ---help--- 248 Say Y here if you want to build support for the USB IrDA FIR Dongle 249 device driver. To compile it as a module, choose M here: the module 250 will be called irda-usb. IrDA-USB support the various IrDA USB 251 dongles available and most of their peculiarities. Those dongles 252 plug in the USB port of your computer, are plug and play, and 253 support SIR and FIR (4Mbps) speeds. On the other hand, those 254 dongles tend to be less efficient than a FIR chipset. 255 256 Please note that the driver is still experimental. And of course, 257 you will need both USB and IrDA support in your kernel... 258 259config SIGMATEL_FIR 260 tristate "SigmaTel STIr4200 bridge" 261 depends on IRDA && USB 262 select CRC32 263 ---help--- 264 Say Y here if you want to build support for the SigmaTel STIr4200 265 USB IrDA FIR bridge device driver. 266 267 USB bridge based on the SigmaTel STIr4200 don't conform to the 268 IrDA-USB device class specification, and therefore need their 269 own specific driver. Those dongles support SIR and FIR (4Mbps) 270 speeds. 271 272 To compile it as a module, choose M here: the module will be called 273 stir4200. 274 275config NSC_FIR 276 tristate "NSC PC87108/PC87338" 277 depends on IRDA && ISA_DMA_API 278 help 279 Say Y here if you want to build support for the NSC PC87108 and 280 PC87338 IrDA chipsets. This driver supports SIR, 281 MIR and FIR (4Mbps) speeds. 282 283 To compile it as a module, choose M here: the module will be called 284 nsc-ircc. 285 286config WINBOND_FIR 287 tristate "Winbond W83977AF (IR)" 288 depends on IRDA && ISA_DMA_API 289 help 290 Say Y here if you want to build IrDA support for the Winbond 291 W83977AF super-io chipset. This driver should be used for the IrDA 292 chipset in the Corel NetWinder. The driver supports SIR, MIR and 293 FIR (4Mbps) speeds. 294 295 To compile it as a module, choose M here: the module will be called 296 w83977af_ir. 297 298config TOSHIBA_FIR 299 tristate "Toshiba Type-O IR Port" 300 depends on IRDA && PCI && !64BIT && VIRT_TO_BUS 301 help 302 Say Y here if you want to build support for the Toshiba Type-O IR 303 and Donau oboe chipsets. These chipsets are used by the Toshiba 304 Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops. 305 To compile it as a module, choose M here: the module will be called 306 donauboe. 307 308config AU1000_FIR 309 tristate "Alchemy IrDA SIR/FIR" 310 depends on IRDA && MIPS_ALCHEMY 311 help 312 Say Y/M here to build support the IrDA peripheral on the 313 Alchemy Au1000 and Au1100 SoCs. 314 Say M to build a module; it will be called au1k_ir.ko 315 316config SMC_IRCC_FIR 317 tristate "SMSC IrCC" 318 depends on IRDA && ISA_DMA_API 319 help 320 Say Y here if you want to build support for the SMC Infrared 321 Communications Controller. It is used in a wide variety of 322 laptops (Fujitsu, Sony, Compaq and some Toshiba). 323 To compile it as a module, choose M here: the module will be called 324 smsc-ircc2.o. 325 326config ALI_FIR 327 tristate "ALi M5123 FIR" 328 depends on IRDA && ISA_DMA_API 329 help 330 Say Y here if you want to build support for the ALi M5123 FIR 331 Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, 332 M1535, M1535D, M1535+, M1535D South Bridge. This driver supports 333 SIR, MIR and FIR (4Mbps) speeds. 334 335 To compile it as a module, choose M here: the module will be called 336 ali-ircc. 337 338config VLSI_FIR 339 tristate "VLSI 82C147 SIR/MIR/FIR" 340 depends on IRDA && PCI 341 help 342 Say Y here if you want to build support for the VLSI 82C147 343 PCI-IrDA Controller. This controller is used by the HP OmniBook 800 344 and 5500 notebooks. The driver provides support for SIR, MIR and 345 FIR (4Mbps) speeds. 346 347 To compile it as a module, choose M here: the module will be called 348 vlsi_ir. 349 350config SA1100_FIR 351 tristate "SA1100 Internal IR" 352 depends on ARCH_SA1100 && IRDA && DMA_SA11X0 353 354config VIA_FIR 355 tristate "VIA VT8231/VT1211 SIR/MIR/FIR" 356 depends on IRDA && ISA_DMA_API 357 help 358 Say Y here if you want to build support for the VIA VT8231 359 and VIA VT1211 IrDA controllers, found on the motherboards using 360 those VIA chipsets. To use this controller, you will need 361 to plug a specific 5 pins FIR IrDA dongle in the specific 362 motherboard connector. The driver provides support for SIR, MIR 363 and FIR (4Mbps) speeds. 364 365 You will need to specify the 'dongle_id' module parameter to 366 indicate the FIR dongle attached to the controller. 367 368 To compile it as a module, choose M here: the module will be called 369 via-ircc. 370 371config PXA_FICP 372 tristate "Intel PXA2xx Internal FICP" 373 depends on ARCH_PXA && IRDA 374 help 375 Say Y or M here if you want to build support for the PXA2xx 376 built-in IRDA interface which can support both SIR and FIR. 377 This driver relies on platform specific helper routines so 378 available capabilities may vary from one PXA2xx target to 379 another. 380 381config MCS_FIR 382 tristate "MosChip MCS7780 IrDA-USB dongle" 383 depends on IRDA && USB 384 select CRC32 385 help 386 Say Y or M here if you want to build support for the MosChip 387 MCS7780 IrDA-USB bridge device driver. 388 389 USB bridge based on the MosChip MCS7780 don't conform to the 390 IrDA-USB device class specification, and therefore need their 391 own specific driver. Those dongles support SIR and FIR (4Mbps) 392 speeds. 393 394 To compile it as a module, choose M here: the module will be called 395 mcs7780. 396 397endmenu 398 399