• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
3  *
4  * The probing code is heavily inspired by cdc_ether, which is:
5  * Copyright (C) 2003-2005 by David Brownell
6  * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  */
12 
13 #include <linux/module.h>
14 #include <linux/netdevice.h>
15 #include <linux/ethtool.h>
16 #include <linux/etherdevice.h>
17 #include <linux/if_arp.h>
18 #include <linux/mii.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/usb.h>
21 #include <linux/usb/cdc.h>
22 #include <linux/usb/usbnet.h>
23 #include <linux/usb/cdc-wdm.h>
24 
25 /* This driver supports wwan (3G/LTE/?) devices using a vendor
26  * specific management protocol called Qualcomm MSM Interface (QMI) -
27  * in addition to the more common AT commands over serial interface
28  * management
29  *
30  * QMI is wrapped in CDC, using CDC encapsulated commands on the
31  * control ("master") interface of a two-interface CDC Union
32  * resembling standard CDC ECM.  The devices do not use the control
33  * interface for any other CDC messages.  Most likely because the
34  * management protocol is used in place of the standard CDC
35  * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
36  *
37  * Alternatively, control and data functions can be combined in a
38  * single USB interface.
39  *
40  * Handling a protocol like QMI is out of the scope for any driver.
41  * It is exported as a character device using the cdc-wdm driver as
42  * a subdriver, enabling userspace applications ("modem managers") to
43  * handle it.
44  *
45  * These devices may alternatively/additionally be configured using AT
46  * commands on a serial interface
47  */
48 
49 /* driver specific data */
50 struct qmi_wwan_state {
51 	struct usb_driver *subdriver;
52 	atomic_t pmcount;
53 	unsigned long flags;
54 	struct usb_interface *control;
55 	struct usb_interface *data;
56 };
57 
58 enum qmi_wwan_flags {
59 	QMI_WWAN_FLAG_RAWIP = 1 << 0,
60 };
61 
62 enum qmi_wwan_quirks {
63 	QMI_WWAN_QUIRK_DTR = 1 << 0,	/* needs "set DTR" request */
64 };
65 
qmi_wwan_netdev_setup(struct net_device * net)66 static void qmi_wwan_netdev_setup(struct net_device *net)
67 {
68 	struct usbnet *dev = netdev_priv(net);
69 	struct qmi_wwan_state *info = (void *)&dev->data;
70 
71 	if (info->flags & QMI_WWAN_FLAG_RAWIP) {
72 		net->header_ops      = NULL;  /* No header */
73 		net->type            = ARPHRD_NONE;
74 		net->hard_header_len = 0;
75 		net->addr_len        = 0;
76 		net->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
77 		set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
78 		netdev_dbg(net, "mode: raw IP\n");
79 	} else if (!net->header_ops) { /* don't bother if already set */
80 		ether_setup(net);
81 		clear_bit(EVENT_NO_IP_ALIGN, &dev->flags);
82 		netdev_dbg(net, "mode: Ethernet\n");
83 	}
84 
85 	/* recalculate buffers after changing hard_header_len */
86 	usbnet_change_mtu(net, net->mtu);
87 }
88 
raw_ip_show(struct device * d,struct device_attribute * attr,char * buf)89 static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
90 {
91 	struct usbnet *dev = netdev_priv(to_net_dev(d));
92 	struct qmi_wwan_state *info = (void *)&dev->data;
93 
94 	return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
95 }
96 
raw_ip_store(struct device * d,struct device_attribute * attr,const char * buf,size_t len)97 static ssize_t raw_ip_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
98 {
99 	struct usbnet *dev = netdev_priv(to_net_dev(d));
100 	struct qmi_wwan_state *info = (void *)&dev->data;
101 	bool enable;
102 	int ret;
103 
104 	if (strtobool(buf, &enable))
105 		return -EINVAL;
106 
107 	/* no change? */
108 	if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
109 		return len;
110 
111 	if (!rtnl_trylock())
112 		return restart_syscall();
113 
114 	/* we don't want to modify a running netdev */
115 	if (netif_running(dev->net)) {
116 		netdev_err(dev->net, "Cannot change a running device\n");
117 		ret = -EBUSY;
118 		goto err;
119 	}
120 
121 	/* let other drivers deny the change */
122 	ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
123 	ret = notifier_to_errno(ret);
124 	if (ret) {
125 		netdev_err(dev->net, "Type change was refused\n");
126 		goto err;
127 	}
128 
129 	if (enable)
130 		info->flags |= QMI_WWAN_FLAG_RAWIP;
131 	else
132 		info->flags &= ~QMI_WWAN_FLAG_RAWIP;
133 	qmi_wwan_netdev_setup(dev->net);
134 	call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
135 	ret = len;
136 err:
137 	rtnl_unlock();
138 	return ret;
139 }
140 
141 static DEVICE_ATTR_RW(raw_ip);
142 
143 static struct attribute *qmi_wwan_sysfs_attrs[] = {
144 	&dev_attr_raw_ip.attr,
145 	NULL,
146 };
147 
148 static struct attribute_group qmi_wwan_sysfs_attr_group = {
149 	.name = "qmi",
150 	.attrs = qmi_wwan_sysfs_attrs,
151 };
152 
153 /* default ethernet address used by the modem */
154 static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
155 
156 static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
157 
158 /* Make up an ethernet header if the packet doesn't have one.
159  *
160  * A firmware bug common among several devices cause them to send raw
161  * IP packets under some circumstances.  There is no way for the
162  * driver/host to know when this will happen.  And even when the bug
163  * hits, some packets will still arrive with an intact header.
164  *
165  * The supported devices are only capably of sending IPv4, IPv6 and
166  * ARP packets on a point-to-point link. Any packet with an ethernet
167  * header will have either our address or a broadcast/multicast
168  * address as destination.  ARP packets will always have a header.
169  *
170  * This means that this function will reliably add the appropriate
171  * header iff necessary, provided our hardware address does not start
172  * with 4 or 6.
173  *
174  * Another common firmware bug results in all packets being addressed
175  * to 00:a0:c6:00:00:00 despite the host address being different.
176  * This function will also fixup such packets.
177  */
qmi_wwan_rx_fixup(struct usbnet * dev,struct sk_buff * skb)178 static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
179 {
180 	struct qmi_wwan_state *info = (void *)&dev->data;
181 	bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
182 	__be16 proto;
183 
184 	/* This check is no longer done by usbnet */
185 	if (skb->len < dev->net->hard_header_len)
186 		return 0;
187 
188 	switch (skb->data[0] & 0xf0) {
189 	case 0x40:
190 		proto = htons(ETH_P_IP);
191 		break;
192 	case 0x60:
193 		proto = htons(ETH_P_IPV6);
194 		break;
195 	case 0x00:
196 		if (rawip)
197 			return 0;
198 		if (is_multicast_ether_addr(skb->data))
199 			return 1;
200 		/* possibly bogus destination - rewrite just in case */
201 		skb_reset_mac_header(skb);
202 		goto fix_dest;
203 	default:
204 		if (rawip)
205 			return 0;
206 		/* pass along other packets without modifications */
207 		return 1;
208 	}
209 	if (rawip) {
210 		skb_reset_mac_header(skb);
211 		skb->dev = dev->net; /* normally set by eth_type_trans */
212 		skb->protocol = proto;
213 		return 1;
214 	}
215 
216 	if (skb_headroom(skb) < ETH_HLEN)
217 		return 0;
218 	skb_push(skb, ETH_HLEN);
219 	skb_reset_mac_header(skb);
220 	eth_hdr(skb)->h_proto = proto;
221 	eth_zero_addr(eth_hdr(skb)->h_source);
222 fix_dest:
223 	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
224 	return 1;
225 }
226 
227 /* very simplistic detection of IPv4 or IPv6 headers */
possibly_iphdr(const char * data)228 static bool possibly_iphdr(const char *data)
229 {
230 	return (data[0] & 0xd0) == 0x40;
231 }
232 
233 /* disallow addresses which may be confused with IP headers */
qmi_wwan_mac_addr(struct net_device * dev,void * p)234 static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
235 {
236 	int ret;
237 	struct sockaddr *addr = p;
238 
239 	ret = eth_prepare_mac_addr_change(dev, p);
240 	if (ret < 0)
241 		return ret;
242 	if (possibly_iphdr(addr->sa_data))
243 		return -EADDRNOTAVAIL;
244 	eth_commit_mac_addr_change(dev, p);
245 	return 0;
246 }
247 
248 static const struct net_device_ops qmi_wwan_netdev_ops = {
249 	.ndo_open		= usbnet_open,
250 	.ndo_stop		= usbnet_stop,
251 	.ndo_start_xmit		= usbnet_start_xmit,
252 	.ndo_tx_timeout		= usbnet_tx_timeout,
253 	.ndo_change_mtu		= usbnet_change_mtu,
254 	.ndo_set_mac_address	= qmi_wwan_mac_addr,
255 	.ndo_validate_addr	= eth_validate_addr,
256 };
257 
258 /* using a counter to merge subdriver requests with our own into a
259  * combined state
260  */
qmi_wwan_manage_power(struct usbnet * dev,int on)261 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
262 {
263 	struct qmi_wwan_state *info = (void *)&dev->data;
264 	int rv;
265 
266 	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
267 		atomic_read(&info->pmcount), on);
268 
269 	if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
270 	    (!on && atomic_dec_and_test(&info->pmcount))) {
271 		/* need autopm_get/put here to ensure the usbcore sees
272 		 * the new value
273 		 */
274 		rv = usb_autopm_get_interface(dev->intf);
275 		dev->intf->needs_remote_wakeup = on;
276 		if (!rv)
277 			usb_autopm_put_interface(dev->intf);
278 	}
279 	return 0;
280 }
281 
qmi_wwan_cdc_wdm_manage_power(struct usb_interface * intf,int on)282 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
283 {
284 	struct usbnet *dev = usb_get_intfdata(intf);
285 
286 	/* can be called while disconnecting */
287 	if (!dev)
288 		return 0;
289 	return qmi_wwan_manage_power(dev, on);
290 }
291 
292 /* collect all three endpoints and register subdriver */
qmi_wwan_register_subdriver(struct usbnet * dev)293 static int qmi_wwan_register_subdriver(struct usbnet *dev)
294 {
295 	int rv;
296 	struct usb_driver *subdriver = NULL;
297 	struct qmi_wwan_state *info = (void *)&dev->data;
298 
299 	/* collect bulk endpoints */
300 	rv = usbnet_get_endpoints(dev, info->data);
301 	if (rv < 0)
302 		goto err;
303 
304 	/* update status endpoint if separate control interface */
305 	if (info->control != info->data)
306 		dev->status = &info->control->cur_altsetting->endpoint[0];
307 
308 	/* require interrupt endpoint for subdriver */
309 	if (!dev->status) {
310 		rv = -EINVAL;
311 		goto err;
312 	}
313 
314 	/* for subdriver power management */
315 	atomic_set(&info->pmcount, 0);
316 
317 	/* register subdriver */
318 	subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
319 					 4096, &qmi_wwan_cdc_wdm_manage_power);
320 	if (IS_ERR(subdriver)) {
321 		dev_err(&info->control->dev, "subdriver registration failed\n");
322 		rv = PTR_ERR(subdriver);
323 		goto err;
324 	}
325 
326 	/* prevent usbnet from using status endpoint */
327 	dev->status = NULL;
328 
329 	/* save subdriver struct for suspend/resume wrappers */
330 	info->subdriver = subdriver;
331 
332 err:
333 	return rv;
334 }
335 
336 /* Send CDC SetControlLineState request, setting or clearing the DTR.
337  * "Required for Autoconnect and 9x30 to wake up" according to the
338  * GobiNet driver. The requirement has been verified on an MDM9230
339  * based Sierra Wireless MC7455
340  */
qmi_wwan_change_dtr(struct usbnet * dev,bool on)341 static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
342 {
343 	u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
344 
345 	return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
346 				USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
347 				on ? 0x01 : 0x00, intf, NULL, 0);
348 }
349 
qmi_wwan_bind(struct usbnet * dev,struct usb_interface * intf)350 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
351 {
352 	int status = -1;
353 	u8 *buf = intf->cur_altsetting->extra;
354 	int len = intf->cur_altsetting->extralen;
355 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
356 	struct usb_cdc_union_desc *cdc_union;
357 	struct usb_cdc_ether_desc *cdc_ether;
358 	struct usb_driver *driver = driver_of(intf);
359 	struct qmi_wwan_state *info = (void *)&dev->data;
360 	struct usb_cdc_parsed_header hdr;
361 
362 	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
363 		      sizeof(struct qmi_wwan_state)));
364 
365 	/* set up initial state */
366 	info->control = intf;
367 	info->data = intf;
368 
369 	/* and a number of CDC descriptors */
370 	cdc_parse_cdc_header(&hdr, intf, buf, len);
371 	cdc_union = hdr.usb_cdc_union_desc;
372 	cdc_ether = hdr.usb_cdc_ether_desc;
373 
374 	/* Use separate control and data interfaces if we found a CDC Union */
375 	if (cdc_union) {
376 		info->data = usb_ifnum_to_if(dev->udev,
377 					     cdc_union->bSlaveInterface0);
378 		if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
379 		    !info->data) {
380 			dev_err(&intf->dev,
381 				"bogus CDC Union: master=%u, slave=%u\n",
382 				cdc_union->bMasterInterface0,
383 				cdc_union->bSlaveInterface0);
384 
385 			/* ignore and continue... */
386 			cdc_union = NULL;
387 			info->data = intf;
388 		}
389 	}
390 
391 	/* errors aren't fatal - we can live with the dynamic address */
392 	if (cdc_ether && cdc_ether->wMaxSegmentSize) {
393 		dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
394 		usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
395 	}
396 
397 	/* claim data interface and set it up */
398 	if (info->control != info->data) {
399 		status = usb_driver_claim_interface(driver, info->data, dev);
400 		if (status < 0)
401 			goto err;
402 	}
403 
404 	status = qmi_wwan_register_subdriver(dev);
405 	if (status < 0 && info->control != info->data) {
406 		usb_set_intfdata(info->data, NULL);
407 		usb_driver_release_interface(driver, info->data);
408 	}
409 
410 	/* disabling remote wakeup on MDM9x30 devices has the same
411 	 * effect as clearing DTR. The device will not respond to QMI
412 	 * requests until we set DTR again.  This is similar to a
413 	 * QMI_CTL SYNC request, clearing a lot of firmware state
414 	 * including the client ID allocations.
415 	 *
416 	 * Our usage model allows a session to span multiple
417 	 * open/close events, so we must prevent the firmware from
418 	 * clearing out state the clients might need.
419 	 *
420 	 * MDM9x30 is the first QMI chipset with USB3 support. Abuse
421 	 * this fact to enable the quirk for all USB3 devices.
422 	 *
423 	 * There are also chipsets with the same "set DTR" requirement
424 	 * but without USB3 support.  Devices based on these chips
425 	 * need a quirk flag in the device ID table.
426 	 */
427 	if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
428 	    le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
429 		qmi_wwan_manage_power(dev, 1);
430 		qmi_wwan_change_dtr(dev, true);
431 	}
432 
433 	/* Never use the same address on both ends of the link, even if the
434 	 * buggy firmware told us to. Or, if device is assigned the well-known
435 	 * buggy firmware MAC address, replace it with a random address,
436 	 */
437 	if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
438 	    ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
439 		eth_hw_addr_random(dev->net);
440 
441 	/* make MAC addr easily distinguishable from an IP header */
442 	if (possibly_iphdr(dev->net->dev_addr)) {
443 		dev->net->dev_addr[0] |= 0x02;	/* set local assignment bit */
444 		dev->net->dev_addr[0] &= 0xbf;	/* clear "IP" bit */
445 	}
446 	dev->net->netdev_ops = &qmi_wwan_netdev_ops;
447 	dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
448 err:
449 	return status;
450 }
451 
qmi_wwan_unbind(struct usbnet * dev,struct usb_interface * intf)452 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
453 {
454 	struct qmi_wwan_state *info = (void *)&dev->data;
455 	struct usb_driver *driver = driver_of(intf);
456 	struct usb_interface *other;
457 
458 	if (info->subdriver && info->subdriver->disconnect)
459 		info->subdriver->disconnect(info->control);
460 
461 	/* disable MDM9x30 quirk */
462 	if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
463 		qmi_wwan_change_dtr(dev, false);
464 		qmi_wwan_manage_power(dev, 0);
465 	}
466 
467 	/* allow user to unbind using either control or data */
468 	if (intf == info->control)
469 		other = info->data;
470 	else
471 		other = info->control;
472 
473 	/* only if not shared */
474 	if (other && intf != other) {
475 		usb_set_intfdata(other, NULL);
476 		usb_driver_release_interface(driver, other);
477 	}
478 
479 	info->subdriver = NULL;
480 	info->data = NULL;
481 	info->control = NULL;
482 }
483 
484 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
485  * subdriver if present.
486  *
487  * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
488  * wrappers for those without adding usbnet reset support first.
489  */
qmi_wwan_suspend(struct usb_interface * intf,pm_message_t message)490 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
491 {
492 	struct usbnet *dev = usb_get_intfdata(intf);
493 	struct qmi_wwan_state *info = (void *)&dev->data;
494 	int ret;
495 
496 	/* Both usbnet_suspend() and subdriver->suspend() MUST return 0
497 	 * in system sleep context, otherwise, the resume callback has
498 	 * to recover device from previous suspend failure.
499 	 */
500 	ret = usbnet_suspend(intf, message);
501 	if (ret < 0)
502 		goto err;
503 
504 	if (intf == info->control && info->subdriver &&
505 	    info->subdriver->suspend)
506 		ret = info->subdriver->suspend(intf, message);
507 	if (ret < 0)
508 		usbnet_resume(intf);
509 err:
510 	return ret;
511 }
512 
qmi_wwan_resume(struct usb_interface * intf)513 static int qmi_wwan_resume(struct usb_interface *intf)
514 {
515 	struct usbnet *dev = usb_get_intfdata(intf);
516 	struct qmi_wwan_state *info = (void *)&dev->data;
517 	int ret = 0;
518 	bool callsub = (intf == info->control && info->subdriver &&
519 			info->subdriver->resume);
520 
521 	if (callsub)
522 		ret = info->subdriver->resume(intf);
523 	if (ret < 0)
524 		goto err;
525 	ret = usbnet_resume(intf);
526 	if (ret < 0 && callsub)
527 		info->subdriver->suspend(intf, PMSG_SUSPEND);
528 err:
529 	return ret;
530 }
531 
532 static const struct driver_info	qmi_wwan_info = {
533 	.description	= "WWAN/QMI device",
534 	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
535 	.bind		= qmi_wwan_bind,
536 	.unbind		= qmi_wwan_unbind,
537 	.manage_power	= qmi_wwan_manage_power,
538 	.rx_fixup       = qmi_wwan_rx_fixup,
539 };
540 
541 static const struct driver_info	qmi_wwan_info_quirk_dtr = {
542 	.description	= "WWAN/QMI device",
543 	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
544 	.bind		= qmi_wwan_bind,
545 	.unbind		= qmi_wwan_unbind,
546 	.manage_power	= qmi_wwan_manage_power,
547 	.rx_fixup       = qmi_wwan_rx_fixup,
548 	.data           = QMI_WWAN_QUIRK_DTR,
549 };
550 
551 #define HUAWEI_VENDOR_ID	0x12D1
552 
553 /* map QMI/wwan function by a fixed interface number */
554 #define QMI_FIXED_INTF(vend, prod, num) \
555 	USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
556 	.driver_info = (unsigned long)&qmi_wwan_info
557 
558 /* devices requiring "set DTR" quirk */
559 #define QMI_QUIRK_SET_DTR(vend, prod, num) \
560 	USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
561 	.driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
562 
563 /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
564 #define QMI_GOBI1K_DEVICE(vend, prod) \
565 	QMI_FIXED_INTF(vend, prod, 3)
566 
567 /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
568 #define QMI_GOBI_DEVICE(vend, prod) \
569 	QMI_FIXED_INTF(vend, prod, 0)
570 
571 static const struct usb_device_id products[] = {
572 	/* 1. CDC ECM like devices match on the control interface */
573 	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */
574 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
575 		.driver_info        = (unsigned long)&qmi_wwan_info,
576 	},
577 	{	/* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
578 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
579 		.driver_info        = (unsigned long)&qmi_wwan_info,
580 	},
581 	{	/* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
582 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
583 		.driver_info        = (unsigned long)&qmi_wwan_info,
584 	},
585 	{	/* Motorola Mapphone devices with MDM6600 */
586 		USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff),
587 		.driver_info        = (unsigned long)&qmi_wwan_info,
588 	},
589 
590 	/* 2. Combined interface devices matching on class+protocol */
591 	{	/* Huawei E367 and possibly others in "Windows mode" */
592 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
593 		.driver_info        = (unsigned long)&qmi_wwan_info,
594 	},
595 	{	/* Huawei E392, E398 and possibly others in "Windows mode" */
596 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
597 		.driver_info        = (unsigned long)&qmi_wwan_info,
598 	},
599 	{	/* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
600 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
601 		.driver_info        = (unsigned long)&qmi_wwan_info,
602 	},
603 	{	/* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
604 		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
605 		.driver_info        = (unsigned long)&qmi_wwan_info,
606 	},
607 	{	/* Pantech UML290, P4200 and more */
608 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
609 		.driver_info        = (unsigned long)&qmi_wwan_info,
610 	},
611 	{	/* Pantech UML290 - newer firmware */
612 		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
613 		.driver_info        = (unsigned long)&qmi_wwan_info,
614 	},
615 	{	/* Novatel USB551L and MC551 */
616 		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
617 		                              USB_CLASS_COMM,
618 		                              USB_CDC_SUBCLASS_ETHERNET,
619 		                              USB_CDC_PROTO_NONE),
620 		.driver_info        = (unsigned long)&qmi_wwan_info,
621 	},
622 	{	/* Novatel E362 */
623 		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
624 		                              USB_CLASS_COMM,
625 		                              USB_CDC_SUBCLASS_ETHERNET,
626 		                              USB_CDC_PROTO_NONE),
627 		.driver_info        = (unsigned long)&qmi_wwan_info,
628 	},
629 	{	/* Novatel Expedite E371 */
630 		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
631 		                              USB_CLASS_COMM,
632 		                              USB_CDC_SUBCLASS_ETHERNET,
633 		                              USB_CDC_PROTO_NONE),
634 		.driver_info        = (unsigned long)&qmi_wwan_info,
635 	},
636 	{	/* Dell Wireless 5800 (Novatel E362) */
637 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
638 					      USB_CLASS_COMM,
639 					      USB_CDC_SUBCLASS_ETHERNET,
640 					      USB_CDC_PROTO_NONE),
641 		.driver_info        = (unsigned long)&qmi_wwan_info,
642 	},
643 	{	/* Dell Wireless 5800 V2 (Novatel E362) */
644 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
645 					      USB_CLASS_COMM,
646 					      USB_CDC_SUBCLASS_ETHERNET,
647 					      USB_CDC_PROTO_NONE),
648 		.driver_info        = (unsigned long)&qmi_wwan_info,
649 	},
650 	{	/* Dell Wireless 5804 (Novatel E371) */
651 		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
652 					      USB_CLASS_COMM,
653 					      USB_CDC_SUBCLASS_ETHERNET,
654 					      USB_CDC_PROTO_NONE),
655 		.driver_info        = (unsigned long)&qmi_wwan_info,
656 	},
657 	{	/* ADU960S */
658 		USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
659 					      USB_CLASS_COMM,
660 					      USB_CDC_SUBCLASS_ETHERNET,
661 					      USB_CDC_PROTO_NONE),
662 		.driver_info        = (unsigned long)&qmi_wwan_info,
663 	},
664 	{	/* HP lt2523 (Novatel E371) */
665 		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d,
666 					      USB_CLASS_COMM,
667 					      USB_CDC_SUBCLASS_ETHERNET,
668 					      USB_CDC_PROTO_NONE),
669 		.driver_info        = (unsigned long)&qmi_wwan_info,
670 	},
671 	{	/* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
672 		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
673 		.driver_info = (unsigned long)&qmi_wwan_info,
674 	},
675 
676 	/* 3. Combined interface devices matching on interface number */
677 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
678 	{QMI_FIXED_INTF(0x05c6, 0x6001, 3)},	/* 4G LTE usb-modem U901 */
679 	{QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
680 	{QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
681 	{QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
682 	{QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
683 	{QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
684 	{QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
685 	{QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
686 	{QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
687 	{QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
688 	{QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
689 	{QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
690 	{QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
691 	{QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
692 	{QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
693 	{QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
694 	{QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
695 	{QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
696 	{QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
697 	{QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
698 	{QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
699 	{QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
700 	{QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
701 	{QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
702 	{QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
703 	{QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
704 	{QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
705 	{QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
706 	{QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
707 	{QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
708 	{QMI_FIXED_INTF(0x05c6, 0x9025, 4)},	/* Alcatel-sbell ASB TL131 TDD LTE  (China Mobile) */
709 	{QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
710 	{QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
711 	{QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
712 	{QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
713 	{QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
714 	{QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
715 	{QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
716 	{QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
717 	{QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
718 	{QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
719 	{QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
720 	{QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
721 	{QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
722 	{QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
723 	{QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
724 	{QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
725 	{QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
726 	{QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
727 	{QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
728 	{QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
729 	{QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
730 	{QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
731 	{QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
732 	{QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
733 	{QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
734 	{QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
735 	{QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
736 	{QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
737 	{QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
738 	{QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
739 	{QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
740 	{QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
741 	{QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
742 	{QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
743 	{QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
744 	{QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
745 	{QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
746 	{QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
747 	{QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
748 	{QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
749 	{QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
750 	{QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
751 	{QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
752 	{QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
753 	{QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
754 	{QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
755 	{QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
756 	{QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
757 	{QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
758 	{QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
759 	{QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
760 	{QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
761 	{QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
762 	{QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
763 	{QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
764 	{QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
765 	{QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
766 	{QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
767 	{QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
768 	{QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
769 	{QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
770 	{QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
771 	{QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
772 	{QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
773 	{QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
774 	{QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
775 	{QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
776 	{QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
777 	{QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
778 	{QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
779 	{QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
780 	{QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
781 	{QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
782 	{QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
783 	{QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
784 	{QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
785 	{QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
786 	{QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
787 	{QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
788 	{QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
789 	{QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
790 	{QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
791 	{QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
792 	{QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
793 	{QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
794 	{QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
795 	{QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
796 	{QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
797 	{QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
798 	{QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
799 	{QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
800 	{QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
801 	{QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
802 	{QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
803 	{QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
804 	{QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
805 	{QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
806 	{QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
807 	{QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
808 	{QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)},	/* YUGA CLM920-NC5 */
809 	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
810 	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
811 	{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */
812 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
813 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
814 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */
815 	{QMI_FIXED_INTF(0x16d8, 0x6280, 0)},	/* CMOTech CHU-628 */
816 	{QMI_FIXED_INTF(0x16d8, 0x7001, 0)},	/* CMOTech CHU-720S */
817 	{QMI_FIXED_INTF(0x16d8, 0x7002, 0)},	/* CMOTech 7002 */
818 	{QMI_FIXED_INTF(0x16d8, 0x7003, 4)},	/* CMOTech CHU-629K */
819 	{QMI_FIXED_INTF(0x16d8, 0x7004, 3)},	/* CMOTech 7004 */
820 	{QMI_FIXED_INTF(0x16d8, 0x7006, 5)},	/* CMOTech CGU-629 */
821 	{QMI_FIXED_INTF(0x16d8, 0x700a, 4)},	/* CMOTech CHU-629S */
822 	{QMI_FIXED_INTF(0x16d8, 0x7211, 0)},	/* CMOTech CHU-720I */
823 	{QMI_FIXED_INTF(0x16d8, 0x7212, 0)},	/* CMOTech 7212 */
824 	{QMI_FIXED_INTF(0x16d8, 0x7213, 0)},	/* CMOTech 7213 */
825 	{QMI_FIXED_INTF(0x16d8, 0x7251, 1)},	/* CMOTech 7251 */
826 	{QMI_FIXED_INTF(0x16d8, 0x7252, 1)},	/* CMOTech 7252 */
827 	{QMI_FIXED_INTF(0x16d8, 0x7253, 1)},	/* CMOTech 7253 */
828 	{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
829 	{QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
830 	{QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
831 	{QMI_FIXED_INTF(0x19d2, 0x0019, 3)},	/* ONDA MT689DC */
832 	{QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
833 	{QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
834 	{QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
835 	{QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
836 	{QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
837 	{QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
838 	{QMI_FIXED_INTF(0x19d2, 0x0055, 1)},	/* ZTE (Vodafone) K3520-Z */
839 	{QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
840 	{QMI_FIXED_INTF(0x19d2, 0x0063, 4)},	/* ZTE (Vodafone) K3565-Z */
841 	{QMI_FIXED_INTF(0x19d2, 0x0104, 4)},	/* ZTE (Vodafone) K4505-Z */
842 	{QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
843 	{QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
844 	{QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
845 	{QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
846 	{QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
847 	{QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
848 	{QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
849 	{QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
850 	{QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
851 	{QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
852 	{QMI_FIXED_INTF(0x19d2, 0x0157, 5)},	/* ZTE MF683 */
853 	{QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
854 	{QMI_FIXED_INTF(0x19d2, 0x0167, 4)},	/* ZTE MF820D */
855 	{QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
856 	{QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
857 	{QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
858 	{QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */
859 	{QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */
860 	{QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
861 	{QMI_FIXED_INTF(0x19d2, 0x0257, 3)},	/* ZTE MF821 */
862 	{QMI_FIXED_INTF(0x19d2, 0x0265, 4)},	/* ONDA MT8205 4G LTE */
863 	{QMI_FIXED_INTF(0x19d2, 0x0284, 4)},	/* ZTE MF880 */
864 	{QMI_FIXED_INTF(0x19d2, 0x0326, 4)},	/* ZTE MF821D */
865 	{QMI_FIXED_INTF(0x19d2, 0x0412, 4)},	/* Telewell TW-LTE 4G */
866 	{QMI_FIXED_INTF(0x19d2, 0x1008, 4)},	/* ZTE (Vodafone) K3570-Z */
867 	{QMI_FIXED_INTF(0x19d2, 0x1010, 4)},	/* ZTE (Vodafone) K3571-Z */
868 	{QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
869 	{QMI_FIXED_INTF(0x19d2, 0x1018, 3)},	/* ZTE (Vodafone) K5006-Z */
870 	{QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
871 	{QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
872 	{QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
873 	{QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
874 	{QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
875 	{QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
876 	{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
877 	{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
878 	{QMI_FIXED_INTF(0x19d2, 0x1270, 5)},	/* ZTE MF667 */
879 	{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
880 	{QMI_FIXED_INTF(0x19d2, 0x1402, 2)},	/* ZTE MF60 */
881 	{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
882 	{QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
883 	{QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */
884 	{QMI_FIXED_INTF(0x19d2, 0x1428, 2)},	/* Telewell TW-LTE 4G v2 */
885 	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */
886 	{QMI_FIXED_INTF(0x2001, 0x7e19, 4)},	/* D-Link DWM-221 B1 */
887 	{QMI_FIXED_INTF(0x2001, 0x7e35, 4)},	/* D-Link DWM-222 */
888 	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
889 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
890 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */
891 	{QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */
892 	{QMI_FIXED_INTF(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354 */
893 	{QMI_FIXED_INTF(0x1199, 0x68c0, 10)},	/* Sierra Wireless MC7304/MC7354 */
894 	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
895 	{QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
896 	{QMI_FIXED_INTF(0x1199, 0x9041, 8)},	/* Sierra Wireless MC7305/MC7355 */
897 	{QMI_FIXED_INTF(0x1199, 0x9041, 10)},	/* Sierra Wireless MC7305/MC7355 */
898 	{QMI_FIXED_INTF(0x1199, 0x9051, 8)},	/* Netgear AirCard 340U */
899 	{QMI_FIXED_INTF(0x1199, 0x9053, 8)},	/* Sierra Wireless Modem */
900 	{QMI_FIXED_INTF(0x1199, 0x9054, 8)},	/* Sierra Wireless Modem */
901 	{QMI_FIXED_INTF(0x1199, 0x9055, 8)},	/* Netgear AirCard 341U */
902 	{QMI_FIXED_INTF(0x1199, 0x9056, 8)},	/* Sierra Wireless Modem */
903 	{QMI_FIXED_INTF(0x1199, 0x9057, 8)},
904 	{QMI_FIXED_INTF(0x1199, 0x9061, 8)},	/* Sierra Wireless Modem */
905 	{QMI_FIXED_INTF(0x1199, 0x9071, 8)},	/* Sierra Wireless MC74xx */
906 	{QMI_FIXED_INTF(0x1199, 0x9071, 10)},	/* Sierra Wireless MC74xx */
907 	{QMI_FIXED_INTF(0x1199, 0x9079, 8)},	/* Sierra Wireless EM74xx */
908 	{QMI_FIXED_INTF(0x1199, 0x9079, 10)},	/* Sierra Wireless EM74xx */
909 	{QMI_FIXED_INTF(0x1199, 0x907b, 8)},	/* Sierra Wireless EM74xx */
910 	{QMI_FIXED_INTF(0x1199, 0x907b, 10)},	/* Sierra Wireless EM74xx */
911 	{QMI_FIXED_INTF(0x1199, 0x9091, 8)},	/* Sierra Wireless EM7565 */
912 	{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
913 	{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)},	/* Alcatel L800MA */
914 	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
915 	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
916 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
917 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
918 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
919 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
920 	{QMI_FIXED_INTF(0x1bc7, 0x1201, 2)},	/* Telit LE920 */
921 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
922 	{QMI_FIXED_INTF(0x0b3c, 0xc000, 4)},	/* Olivetti Olicard 100 */
923 	{QMI_FIXED_INTF(0x0b3c, 0xc001, 4)},	/* Olivetti Olicard 120 */
924 	{QMI_FIXED_INTF(0x0b3c, 0xc002, 4)},	/* Olivetti Olicard 140 */
925 	{QMI_FIXED_INTF(0x0b3c, 0xc004, 6)},	/* Olivetti Olicard 155 */
926 	{QMI_FIXED_INTF(0x0b3c, 0xc005, 6)},	/* Olivetti Olicard 200 */
927 	{QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)},	/* Olivetti Olicard 160 */
928 	{QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)},	/* Olivetti Olicard 500 */
929 	{QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},	/* Cinterion PLxx */
930 	{QMI_FIXED_INTF(0x1e2d, 0x0053, 4)},	/* Cinterion PHxx,PXxx */
931 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},	/* Cinterion PHxx,PXxx (2 RmNet) */
932 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},	/* Cinterion PHxx,PXxx (2 RmNet) */
933 	{QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},	/* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
934 	{QMI_FIXED_INTF(0x413c, 0x81a2, 8)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
935 	{QMI_FIXED_INTF(0x413c, 0x81a3, 8)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
936 	{QMI_FIXED_INTF(0x413c, 0x81a4, 8)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
937 	{QMI_FIXED_INTF(0x413c, 0x81a8, 8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
938 	{QMI_FIXED_INTF(0x413c, 0x81a9, 8)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
939 	{QMI_FIXED_INTF(0x413c, 0x81b1, 8)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
940 	{QMI_FIXED_INTF(0x413c, 0x81b3, 8)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
941 	{QMI_FIXED_INTF(0x413c, 0x81b6, 8)},	/* Dell Wireless 5811e */
942 	{QMI_FIXED_INTF(0x413c, 0x81b6, 10)},	/* Dell Wireless 5811e */
943 	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
944 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
945 	{QMI_FIXED_INTF(0x1e0e, 0x9001, 5)},	/* SIMCom 7230E */
946 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
947 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)},	/* Quectel EC21 Mini PCIe */
948 	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
949 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0306, 4)},	/* Quectel EP06 Mini PCIe */
950 
951 	/* 4. Gobi 1000 devices */
952 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
953 	{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
954 	{QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
955 	{QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
956 	{QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */
957 	{QMI_GOBI1K_DEVICE(0x1410, 0xa002)},	/* Novatel Gobi Modem device */
958 	{QMI_GOBI1K_DEVICE(0x1410, 0xa003)},	/* Novatel Gobi Modem device */
959 	{QMI_GOBI1K_DEVICE(0x1410, 0xa004)},	/* Novatel Gobi Modem device */
960 	{QMI_GOBI1K_DEVICE(0x1410, 0xa005)},	/* Novatel Gobi Modem device */
961 	{QMI_GOBI1K_DEVICE(0x1410, 0xa006)},	/* Novatel Gobi Modem device */
962 	{QMI_GOBI1K_DEVICE(0x1410, 0xa007)},	/* Novatel Gobi Modem device */
963 	{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
964 	{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
965 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
966 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
967 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
968 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
969 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
970 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
971 
972 	/* 5. Gobi 2000 and 3000 devices */
973 	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
974 	{QMI_GOBI_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
975 	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
976 	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
977 	{QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
978 	{QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
979 	{QMI_GOBI_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
980 	{QMI_FIXED_INTF(0x05c6, 0x9215, 4)},	/* Quectel EC20 Mini PCIe */
981 	{QMI_GOBI_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
982 	{QMI_GOBI_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
983 	{QMI_GOBI_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
984 	{QMI_GOBI_DEVICE(0x0af0, 0x8120)},	/* Option GTM681W */
985 	{QMI_GOBI_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */
986 	{QMI_GOBI_DEVICE(0x1199, 0x68a9)},	/* Sierra Wireless Modem */
987 	{QMI_GOBI_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
988 	{QMI_GOBI_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
989 	{QMI_GOBI_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
990 	{QMI_GOBI_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
991 	{QMI_GOBI_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
992 	{QMI_GOBI_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
993 	{QMI_GOBI_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
994 	{QMI_GOBI_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
995 	{QMI_GOBI_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
996 	{QMI_GOBI_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
997 	{QMI_GOBI_DEVICE(0x1199, 0x9011)},	/* Sierra Wireless Gobi 2000 Modem device (MC8305) */
998 	{QMI_GOBI_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
999 	{QMI_GOBI_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
1000 	{QMI_GOBI_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
1001 	{QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
1002 	{QMI_GOBI_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
1003 	{QMI_GOBI_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
1004 	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
1005 	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */
1006 	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel E396) */
1007 
1008 	{ }					/* END */
1009 };
1010 MODULE_DEVICE_TABLE(usb, products);
1011 
quectel_ec20_detected(struct usb_interface * intf)1012 static bool quectel_ec20_detected(struct usb_interface *intf)
1013 {
1014 	struct usb_device *dev = interface_to_usbdev(intf);
1015 
1016 	if (dev->actconfig &&
1017 	    le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
1018 	    le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
1019 	    dev->actconfig->desc.bNumInterfaces == 5)
1020 		return true;
1021 
1022 	return false;
1023 }
1024 
qmi_wwan_probe(struct usb_interface * intf,const struct usb_device_id * prod)1025 static int qmi_wwan_probe(struct usb_interface *intf,
1026 			  const struct usb_device_id *prod)
1027 {
1028 	struct usb_device_id *id = (struct usb_device_id *)prod;
1029 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
1030 
1031 	/* Workaround to enable dynamic IDs.  This disables usbnet
1032 	 * blacklisting functionality.  Which, if required, can be
1033 	 * reimplemented here by using a magic "blacklist" value
1034 	 * instead of 0 in the static device id table
1035 	 */
1036 	if (!id->driver_info) {
1037 		dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
1038 		id->driver_info = (unsigned long)&qmi_wwan_info;
1039 	}
1040 
1041 	/* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
1042 	if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
1043 		dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
1044 		return -ENODEV;
1045 	}
1046 
1047 	return usbnet_probe(intf, id);
1048 }
1049 
1050 static struct usb_driver qmi_wwan_driver = {
1051 	.name		      = "qmi_wwan",
1052 	.id_table	      = products,
1053 	.probe		      = qmi_wwan_probe,
1054 	.disconnect	      = usbnet_disconnect,
1055 	.suspend	      = qmi_wwan_suspend,
1056 	.resume		      =	qmi_wwan_resume,
1057 	.reset_resume         = qmi_wwan_resume,
1058 	.supports_autosuspend = 1,
1059 	.disable_hub_initiated_lpm = 1,
1060 };
1061 
1062 module_usb_driver(qmi_wwan_driver);
1063 
1064 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
1065 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
1066 MODULE_LICENSE("GPL");
1067