• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16 
17 #include <linux/module.h>
18 #include <linux/pci.h>
19 #include <linux/moduleparam.h>
20 #include <linux/interrupt.h>
21 #include <linux/suspend.h>
22 #include "wil6210.h"
23 #include <linux/rtnetlink.h>
24 
25 static bool use_msi = true;
26 module_param(use_msi, bool, S_IRUGO);
27 MODULE_PARM_DESC(use_msi, " Use MSI interrupt, default - true");
28 
29 #ifdef CONFIG_PM
30 #ifdef CONFIG_PM_SLEEP
31 static int wil6210_pm_notify(struct notifier_block *notify_block,
32 			     unsigned long mode, void *unused);
33 #endif /* CONFIG_PM_SLEEP */
34 #endif /* CONFIG_PM */
35 
36 static
wil_set_capabilities(struct wil6210_priv * wil)37 void wil_set_capabilities(struct wil6210_priv *wil)
38 {
39 	u32 rev_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
40 
41 	bitmap_zero(wil->hw_capabilities, hw_capability_last);
42 	bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
43 
44 	switch (rev_id) {
45 	case JTAG_DEV_ID_SPARROW_B0:
46 		wil->hw_name = "Sparrow B0";
47 		wil->hw_version = HW_VER_SPARROW_B0;
48 		break;
49 	default:
50 		wil_err(wil, "Unknown board hardware 0x%08x\n", rev_id);
51 		wil->hw_name = "Unknown";
52 		wil->hw_version = HW_VER_UNKNOWN;
53 	}
54 
55 	wil_info(wil, "Board hardware is %s\n", wil->hw_name);
56 
57 	/* extract FW capabilities from file without loading the FW */
58 	wil_request_firmware(wil, WIL_FW_NAME, false);
59 }
60 
wil_disable_irq(struct wil6210_priv * wil)61 void wil_disable_irq(struct wil6210_priv *wil)
62 {
63 	disable_irq(wil->pdev->irq);
64 }
65 
wil_enable_irq(struct wil6210_priv * wil)66 void wil_enable_irq(struct wil6210_priv *wil)
67 {
68 	enable_irq(wil->pdev->irq);
69 }
70 
71 /* Bus ops */
wil_if_pcie_enable(struct wil6210_priv * wil)72 static int wil_if_pcie_enable(struct wil6210_priv *wil)
73 {
74 	struct pci_dev *pdev = wil->pdev;
75 	int rc;
76 	/* on platforms with buggy ACPI, pdev->msi_enabled may be set to
77 	 * allow pci_enable_device to work. This indicates INTx was not routed
78 	 * and only MSI should be used
79 	 */
80 	int msi_only = pdev->msi_enabled;
81 	bool _use_msi = use_msi;
82 
83 	wil_dbg_misc(wil, "%s()\n", __func__);
84 
85 	pdev->msi_enabled = 0;
86 
87 	pci_set_master(pdev);
88 
89 	wil_dbg_misc(wil, "Setup %s interrupt\n", use_msi ? "MSI" : "INTx");
90 
91 	if (use_msi && pci_enable_msi(pdev)) {
92 		wil_err(wil, "pci_enable_msi failed, use INTx\n");
93 		_use_msi = false;
94 	}
95 
96 	if (!_use_msi && msi_only) {
97 		wil_err(wil, "Interrupt pin not routed, unable to use INTx\n");
98 		rc = -ENODEV;
99 		goto stop_master;
100 	}
101 
102 	rc = wil6210_init_irq(wil, pdev->irq, _use_msi);
103 	if (rc)
104 		goto stop_master;
105 
106 	/* need reset here to obtain MAC */
107 	mutex_lock(&wil->mutex);
108 	rc = wil_reset(wil, false);
109 	mutex_unlock(&wil->mutex);
110 	if (rc)
111 		goto release_irq;
112 
113 	return 0;
114 
115  release_irq:
116 	wil6210_fini_irq(wil, pdev->irq);
117 	/* safe to call if no MSI */
118 	pci_disable_msi(pdev);
119  stop_master:
120 	pci_clear_master(pdev);
121 	return rc;
122 }
123 
wil_if_pcie_disable(struct wil6210_priv * wil)124 static int wil_if_pcie_disable(struct wil6210_priv *wil)
125 {
126 	struct pci_dev *pdev = wil->pdev;
127 
128 	wil_dbg_misc(wil, "%s()\n", __func__);
129 
130 	pci_clear_master(pdev);
131 	/* disable and release IRQ */
132 	wil6210_fini_irq(wil, pdev->irq);
133 	/* safe to call if no MSI */
134 	pci_disable_msi(pdev);
135 	/* TODO: disable HW */
136 
137 	return 0;
138 }
139 
wil_platform_rop_ramdump(void * wil_handle,void * buf,uint32_t size)140 static int wil_platform_rop_ramdump(void *wil_handle, void *buf, uint32_t size)
141 {
142 	struct wil6210_priv *wil = wil_handle;
143 
144 	if (!wil)
145 		return -EINVAL;
146 
147 	return wil_fw_copy_crash_dump(wil, buf, size);
148 }
149 
wil_platform_rop_fw_recovery(void * wil_handle)150 static int wil_platform_rop_fw_recovery(void *wil_handle)
151 {
152 	struct wil6210_priv *wil = wil_handle;
153 
154 	if (!wil)
155 		return -EINVAL;
156 
157 	wil_fw_error_recovery(wil);
158 
159 	return 0;
160 }
161 
wil_pcie_probe(struct pci_dev * pdev,const struct pci_device_id * id)162 static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
163 {
164 	struct wil6210_priv *wil;
165 	struct device *dev = &pdev->dev;
166 	int rc;
167 	const struct wil_platform_rops rops = {
168 		.ramdump = wil_platform_rop_ramdump,
169 		.fw_recovery = wil_platform_rop_fw_recovery,
170 	};
171 
172 	/* check HW */
173 	dev_info(&pdev->dev, WIL_NAME
174 		 " device found [%04x:%04x] (rev %x)\n",
175 		 (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
176 
177 	if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
178 		dev_err(&pdev->dev, "Not " WIL_NAME "? "
179 			"BAR0 size is %lu while expecting %lu\n",
180 			(ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
181 		return -ENODEV;
182 	}
183 
184 	wil = wil_if_alloc(dev);
185 	if (IS_ERR(wil)) {
186 		rc = (int)PTR_ERR(wil);
187 		dev_err(dev, "wil_if_alloc failed: %d\n", rc);
188 		return rc;
189 	}
190 	wil->pdev = pdev;
191 	pci_set_drvdata(pdev, wil);
192 	/* rollback to if_free */
193 
194 	wil->platform_handle =
195 		wil_platform_init(&pdev->dev, &wil->platform_ops, &rops, wil);
196 	if (!wil->platform_handle) {
197 		rc = -ENODEV;
198 		wil_err(wil, "wil_platform_init failed\n");
199 		goto if_free;
200 	}
201 	/* rollback to err_plat */
202 
203 	rc = pci_enable_device(pdev);
204 	if (rc) {
205 		wil_err(wil,
206 			"pci_enable_device failed, retry with MSI only\n");
207 		/* Work around for platforms that can't allocate IRQ:
208 		 * retry with MSI only
209 		 */
210 		pdev->msi_enabled = 1;
211 		rc = pci_enable_device(pdev);
212 	}
213 	if (rc) {
214 		wil_err(wil,
215 			"pci_enable_device failed, even with MSI only\n");
216 		goto err_plat;
217 	}
218 	/* rollback to err_disable_pdev */
219 
220 	rc = pci_request_region(pdev, 0, WIL_NAME);
221 	if (rc) {
222 		wil_err(wil, "pci_request_region failed\n");
223 		goto err_disable_pdev;
224 	}
225 	/* rollback to err_release_reg */
226 
227 	wil->csr = pci_ioremap_bar(pdev, 0);
228 	if (!wil->csr) {
229 		wil_err(wil, "pci_ioremap_bar failed\n");
230 		rc = -ENODEV;
231 		goto err_release_reg;
232 	}
233 	/* rollback to err_iounmap */
234 	wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
235 
236 	wil_set_capabilities(wil);
237 	wil6210_clear_irq(wil);
238 
239 	/* FW should raise IRQ when ready */
240 	rc = wil_if_pcie_enable(wil);
241 	if (rc) {
242 		wil_err(wil, "Enable device failed\n");
243 		goto err_iounmap;
244 	}
245 	/* rollback to bus_disable */
246 
247 	rc = wil_if_add(wil);
248 	if (rc) {
249 		wil_err(wil, "wil_if_add failed: %d\n", rc);
250 		goto bus_disable;
251 	}
252 
253 #ifdef CONFIG_PM
254 #ifdef CONFIG_PM_SLEEP
255 	wil->pm_notify.notifier_call = wil6210_pm_notify;
256 	rc = register_pm_notifier(&wil->pm_notify);
257 	if (rc)
258 		/* Do not fail the driver initialization, as suspend can
259 		 * be prevented in a later phase if needed
260 		 */
261 		wil_err(wil, "register_pm_notifier failed: %d\n", rc);
262 #endif /* CONFIG_PM_SLEEP */
263 #endif /* CONFIG_PM */
264 
265 	wil6210_debugfs_init(wil);
266 
267 
268 	return 0;
269 
270 bus_disable:
271 	wil_if_pcie_disable(wil);
272 err_iounmap:
273 	pci_iounmap(pdev, wil->csr);
274 err_release_reg:
275 	pci_release_region(pdev, 0);
276 err_disable_pdev:
277 	pci_disable_device(pdev);
278 err_plat:
279 	if (wil->platform_ops.uninit)
280 		wil->platform_ops.uninit(wil->platform_handle);
281 if_free:
282 	wil_if_free(wil);
283 
284 	return rc;
285 }
286 
wil_pcie_remove(struct pci_dev * pdev)287 static void wil_pcie_remove(struct pci_dev *pdev)
288 {
289 	struct wil6210_priv *wil = pci_get_drvdata(pdev);
290 	void __iomem *csr = wil->csr;
291 
292 	wil_dbg_misc(wil, "%s()\n", __func__);
293 
294 #ifdef CONFIG_PM
295 #ifdef CONFIG_PM_SLEEP
296 	unregister_pm_notifier(&wil->pm_notify);
297 #endif /* CONFIG_PM_SLEEP */
298 #endif /* CONFIG_PM */
299 
300 	wil6210_debugfs_remove(wil);
301 	rtnl_lock();
302 	wil_p2p_wdev_free(wil);
303 	rtnl_unlock();
304 	wil_if_remove(wil);
305 	wil_if_pcie_disable(wil);
306 	pci_iounmap(pdev, csr);
307 	pci_release_region(pdev, 0);
308 	pci_disable_device(pdev);
309 	if (wil->platform_ops.uninit)
310 		wil->platform_ops.uninit(wil->platform_handle);
311 	wil_if_free(wil);
312 }
313 
314 static const struct pci_device_id wil6210_pcie_ids[] = {
315 	{ PCI_DEVICE(0x1ae9, 0x0310) },
316 	{ PCI_DEVICE(0x1ae9, 0x0302) }, /* same as above, firmware broken */
317 	{ /* end: all zeroes */	},
318 };
319 MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
320 
321 #ifdef CONFIG_PM
322 #ifdef CONFIG_PM_SLEEP
323 
wil6210_suspend(struct device * dev,bool is_runtime)324 static int wil6210_suspend(struct device *dev, bool is_runtime)
325 {
326 	int rc = 0;
327 	struct pci_dev *pdev = to_pci_dev(dev);
328 	struct wil6210_priv *wil = pci_get_drvdata(pdev);
329 
330 	wil_dbg_pm(wil, "%s(%s)\n", __func__,
331 		   is_runtime ? "runtime" : "system");
332 
333 	rc = wil_can_suspend(wil, is_runtime);
334 	if (rc)
335 		goto out;
336 
337 	rc = wil_suspend(wil, is_runtime);
338 	if (rc)
339 		goto out;
340 
341 	/* TODO: how do I bring card in low power state? */
342 
343 	/* disable bus mastering */
344 	pci_clear_master(pdev);
345 	/* PCI will call pci_save_state(pdev) and pci_prepare_to_sleep(pdev) */
346 
347 out:
348 	return rc;
349 }
350 
wil6210_resume(struct device * dev,bool is_runtime)351 static int wil6210_resume(struct device *dev, bool is_runtime)
352 {
353 	int rc = 0;
354 	struct pci_dev *pdev = to_pci_dev(dev);
355 	struct wil6210_priv *wil = pci_get_drvdata(pdev);
356 
357 	wil_dbg_pm(wil, "%s(%s)\n", __func__,
358 		   is_runtime ? "runtime" : "system");
359 
360 	/* allow master */
361 	pci_set_master(pdev);
362 
363 	rc = wil_resume(wil, is_runtime);
364 	if (rc)
365 		pci_clear_master(pdev);
366 
367 	return rc;
368 }
369 
wil6210_pm_notify(struct notifier_block * notify_block,unsigned long mode,void * unused)370 static int wil6210_pm_notify(struct notifier_block *notify_block,
371 			     unsigned long mode, void *unused)
372 {
373 	struct wil6210_priv *wil = container_of(
374 		notify_block, struct wil6210_priv, pm_notify);
375 	int rc = 0;
376 	enum wil_platform_event evt;
377 
378 	wil_dbg_pm(wil, "%s: mode (%ld)\n", __func__, mode);
379 
380 	switch (mode) {
381 	case PM_HIBERNATION_PREPARE:
382 	case PM_SUSPEND_PREPARE:
383 	case PM_RESTORE_PREPARE:
384 		rc = wil_can_suspend(wil, false);
385 		if (rc)
386 			break;
387 		evt = WIL_PLATFORM_EVT_PRE_SUSPEND;
388 		if (wil->platform_ops.notify)
389 			rc = wil->platform_ops.notify(wil->platform_handle,
390 						      evt);
391 		break;
392 	case PM_POST_SUSPEND:
393 	case PM_POST_HIBERNATION:
394 	case PM_POST_RESTORE:
395 		evt = WIL_PLATFORM_EVT_POST_SUSPEND;
396 		if (wil->platform_ops.notify)
397 			rc = wil->platform_ops.notify(wil->platform_handle,
398 						      evt);
399 		break;
400 	default:
401 		wil_dbg_pm(wil, "unhandled notify mode %ld\n", mode);
402 		break;
403 	}
404 
405 	wil_dbg_pm(wil, "notification mode %ld: rc (%d)\n", mode, rc);
406 	return rc;
407 }
408 
wil6210_pm_suspend(struct device * dev)409 static int wil6210_pm_suspend(struct device *dev)
410 {
411 	return wil6210_suspend(dev, false);
412 }
413 
wil6210_pm_resume(struct device * dev)414 static int wil6210_pm_resume(struct device *dev)
415 {
416 	return wil6210_resume(dev, false);
417 }
418 #endif /* CONFIG_PM_SLEEP */
419 
420 #endif /* CONFIG_PM */
421 
422 static const struct dev_pm_ops wil6210_pm_ops = {
423 	SET_SYSTEM_SLEEP_PM_OPS(wil6210_pm_suspend, wil6210_pm_resume)
424 };
425 
426 static struct pci_driver wil6210_driver = {
427 	.probe		= wil_pcie_probe,
428 	.remove		= wil_pcie_remove,
429 	.id_table	= wil6210_pcie_ids,
430 	.name		= WIL_NAME,
431 	.driver		= {
432 		.pm = &wil6210_pm_ops,
433 	},
434 };
435 
wil6210_driver_init(void)436 static int __init wil6210_driver_init(void)
437 {
438 	int rc;
439 
440 	rc = wil_platform_modinit();
441 	if (rc)
442 		return rc;
443 
444 	rc = pci_register_driver(&wil6210_driver);
445 	if (rc)
446 		wil_platform_modexit();
447 	return rc;
448 }
449 module_init(wil6210_driver_init);
450 
wil6210_driver_exit(void)451 static void __exit wil6210_driver_exit(void)
452 {
453 	pci_unregister_driver(&wil6210_driver);
454 	wil_platform_modexit();
455 }
456 module_exit(wil6210_driver_exit);
457 
458 MODULE_LICENSE("Dual BSD/GPL");
459 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
460 MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");
461