• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* linux/spi/ads7846.h */
2 
3 /* Touchscreen characteristics vary between boards and models.  The
4  * platform_data for the device's "struct device" holds this information.
5  *
6  * It's OK if the min/max values are zero.
7  */
8 enum ads7846_filter {
9 	ADS7846_FILTER_OK,
10 	ADS7846_FILTER_REPEAT,
11 	ADS7846_FILTER_IGNORE,
12 };
13 
14 struct ads7846_platform_data {
15 	u16	model;			/* 7843, 7845, 7846, 7873. */
16 	u16	vref_delay_usecs;	/* 0 for external vref; etc */
17 	u16	vref_mv;		/* external vref value, milliVolts
18 					 * ads7846: if 0, use internal vref */
19 	bool	keep_vref_on;		/* set to keep vref on for differential
20 					 * measurements as well */
21 	bool	swap_xy;		/* swap x and y axes */
22 
23 	/* Settling time of the analog signals; a function of Vcc and the
24 	 * capacitance on the X/Y drivers.  If set to non-zero, two samples
25 	 * are taken with settle_delay us apart, and the second one is used.
26 	 * ~150 uSec with 0.01uF caps.
27 	 */
28 	u16	settle_delay_usecs;
29 
30 	/* If set to non-zero, after samples are taken this delay is applied
31 	 * and penirq is rechecked, to help avoid false events.  This value
32 	 * is affected by the material used to build the touch layer.
33 	 */
34 	u16	penirq_recheck_delay_usecs;
35 
36 	u16	x_plate_ohms;
37 	u16	y_plate_ohms;
38 
39 	u16	x_min, x_max;
40 	u16	y_min, y_max;
41 	u16	pressure_min, pressure_max;
42 
43 	u16	debounce_max;		/* max number of additional readings
44 					 * per sample */
45 	u16	debounce_tol;		/* tolerance used for filtering */
46 	u16	debounce_rep;		/* additional consecutive good readings
47 					 * required after the first two */
48 	int	gpio_pendown;		/* the GPIO used to decide the pendown
49 					 * state if get_pendown_state == NULL */
50 	int	gpio_pendown_debounce;	/* platform specific debounce time for
51 					 * the gpio_pendown */
52 	int	(*get_pendown_state)(void);
53 	int	(*filter_init)	(const struct ads7846_platform_data *pdata,
54 				 void **filter_data);
55 	int	(*filter)	(void *filter_data, int data_idx, int *val);
56 	void	(*filter_cleanup)(void *filter_data);
57 	void	(*wait_for_sync)(void);
58 	bool	wakeup;
59 	unsigned long irq_flags;
60 };
61 
62