1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
4 *
5 * Renesas Solutions sh7763rdp board
6 *
7 * Copyright (C) 2008 Renesas Solutions Corp.
8 * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9 */
10 #include <linux/init.h>
11 #include <linux/platform_device.h>
12 #include <linux/interrupt.h>
13 #include <linux/input.h>
14 #include <linux/mtd/physmap.h>
15 #include <linux/fb.h>
16 #include <linux/io.h>
17 #include <linux/sh_eth.h>
18 #include <linux/sh_intc.h>
19 #include <mach/sh7763rdp.h>
20 #include <asm/sh7760fb.h>
21
22 /* NOR Flash */
23 static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
24 {
25 .name = "U-Boot",
26 .offset = 0,
27 .size = (2 * 128 * 1024),
28 .mask_flags = MTD_WRITEABLE, /* Read-only */
29 }, {
30 .name = "Linux-Kernel",
31 .offset = MTDPART_OFS_APPEND,
32 .size = (20 * 128 * 1024),
33 }, {
34 .name = "Root Filesystem",
35 .offset = MTDPART_OFS_APPEND,
36 .size = MTDPART_SIZ_FULL,
37 },
38 };
39
40 static struct physmap_flash_data sh7763rdp_nor_flash_data = {
41 .width = 2,
42 .parts = sh7763rdp_nor_flash_partitions,
43 .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
44 };
45
46 static struct resource sh7763rdp_nor_flash_resources[] = {
47 [0] = {
48 .name = "NOR Flash",
49 .start = 0,
50 .end = (64 * 1024 * 1024),
51 .flags = IORESOURCE_MEM,
52 },
53 };
54
55 static struct platform_device sh7763rdp_nor_flash_device = {
56 .name = "physmap-flash",
57 .resource = sh7763rdp_nor_flash_resources,
58 .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
59 .dev = {
60 .platform_data = &sh7763rdp_nor_flash_data,
61 },
62 };
63
64 /*
65 * SH-Ether
66 *
67 * SH Ether of SH7763 has multi IRQ handling.
68 * (0x920,0x940,0x960 -> 0x920)
69 */
70 static struct resource sh_eth_resources[] = {
71 {
72 .start = 0xFEE00800, /* use eth1 */
73 .end = 0xFEE00F7C - 1,
74 .flags = IORESOURCE_MEM,
75 }, {
76 .start = 0xFEE01800, /* TSU */
77 .end = 0xFEE01FFF,
78 .flags = IORESOURCE_MEM,
79 }, {
80 .start = evt2irq(0x920), /* irq number */
81 .flags = IORESOURCE_IRQ,
82 },
83 };
84
85 static struct sh_eth_plat_data sh7763_eth_pdata = {
86 .phy = 1,
87 .phy_interface = PHY_INTERFACE_MODE_MII,
88 };
89
90 static struct platform_device sh7763rdp_eth_device = {
91 .name = "sh7763-gether",
92 .resource = sh_eth_resources,
93 .num_resources = ARRAY_SIZE(sh_eth_resources),
94 .dev = {
95 .platform_data = &sh7763_eth_pdata,
96 },
97 };
98
99 /* SH7763 LCDC */
100 static struct resource sh7763rdp_fb_resources[] = {
101 {
102 .start = 0xFFE80000,
103 .end = 0xFFE80442 - 1,
104 .flags = IORESOURCE_MEM,
105 },
106 };
107
108 static struct fb_videomode sh7763fb_videomode = {
109 .refresh = 60,
110 .name = "VGA Monitor",
111 .xres = 640,
112 .yres = 480,
113 .pixclock = 10000,
114 .left_margin = 80,
115 .right_margin = 24,
116 .upper_margin = 30,
117 .lower_margin = 1,
118 .hsync_len = 96,
119 .vsync_len = 1,
120 .sync = 0,
121 .vmode = FB_VMODE_NONINTERLACED,
122 .flag = FBINFO_FLAG_DEFAULT,
123 };
124
125 static struct sh7760fb_platdata sh7763fb_def_pdata = {
126 .def_mode = &sh7763fb_videomode,
127 .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
128 .lddfr = LDDFR_16BPP_RGB565,
129 .ldpmmr = 0x0000,
130 .ldpspr = 0xFFFF,
131 .ldaclnr = 0x0001,
132 .ldickr = 0x1102,
133 .rotate = 0,
134 .novsync = 0,
135 .blank = NULL,
136 };
137
138 static struct platform_device sh7763rdp_fb_device = {
139 .name = "sh7760-lcdc",
140 .resource = sh7763rdp_fb_resources,
141 .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
142 .dev = {
143 .platform_data = &sh7763fb_def_pdata,
144 },
145 };
146
147 static struct platform_device *sh7763rdp_devices[] __initdata = {
148 &sh7763rdp_nor_flash_device,
149 &sh7763rdp_eth_device,
150 &sh7763rdp_fb_device,
151 };
152
sh7763rdp_devices_setup(void)153 static int __init sh7763rdp_devices_setup(void)
154 {
155 return platform_add_devices(sh7763rdp_devices,
156 ARRAY_SIZE(sh7763rdp_devices));
157 }
158 device_initcall(sh7763rdp_devices_setup);
159
sh7763rdp_setup(char ** cmdline_p)160 static void __init sh7763rdp_setup(char **cmdline_p)
161 {
162 /* Board version check */
163 if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
164 printk(KERN_INFO "RTE Standard Configuration\n");
165 else
166 printk(KERN_INFO "RTA Standard Configuration\n");
167
168 /* USB pin select bits (clear bit 5-2 to 0) */
169 __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
170 /* USBH setup port I controls to other (clear bits 4-9 to 0) */
171 __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
172
173 /* Select USB Host controller */
174 __raw_writew(0x00, USB_USBHSC);
175
176 /* For LCD */
177 /* set PTJ7-1, bits 15-2 of PJCR to 0 */
178 __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
179 /* set PTI5, bits 11-10 of PICR to 0 */
180 __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
181 __raw_writew(0, PORT_PKCR);
182 __raw_writew(0, PORT_PLCR);
183 /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
184 __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
185 /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
186 __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
187
188 /* For HAC */
189 /* bit3-0 0100:HAC & SSI1 enable */
190 __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
191 /* bit14 1:SSI_HAC_CLK enable */
192 __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
193
194 /* SH-Ether */
195 __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
196 __raw_writew(0x0, PORT_PFCR);
197 __raw_writew(0x0, PORT_PFCR);
198 __raw_writew(0x0, PORT_PFCR);
199
200 /* MMC */
201 /*selects SCIF and MMC other functions */
202 __raw_writew(0x0001, PORT_PSEL0);
203 /* MMC clock operates */
204 __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
205 __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
206 __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
207 }
208
209 static struct sh_machine_vector mv_sh7763rdp __initmv = {
210 .mv_name = "sh7763drp",
211 .mv_setup = sh7763rdp_setup,
212 .mv_init_irq = init_sh7763rdp_IRQ,
213 };
214