1 // SPDX-License-Identifier: GPL-2.0
2
3 #include <linux/blk-mq.h>
4 #include <linux/blk-pm.h>
5 #include <linux/blkdev.h>
6 #include <linux/pm_runtime.h>
7 #include "blk-mq.h"
8 #include "blk-mq-tag.h"
9
10 /**
11 * blk_pm_runtime_init - Block layer runtime PM initialization routine
12 * @q: the queue of the device
13 * @dev: the device the queue belongs to
14 *
15 * Description:
16 * Initialize runtime-PM-related fields for @q and start auto suspend for
17 * @dev. Drivers that want to take advantage of request-based runtime PM
18 * should call this function after @dev has been initialized, and its
19 * request queue @q has been allocated, and runtime PM for it can not happen
20 * yet(either due to disabled/forbidden or its usage_count > 0). In most
21 * cases, driver should call this function before any I/O has taken place.
22 *
23 * This function takes care of setting up using auto suspend for the device,
24 * the autosuspend delay is set to -1 to make runtime suspend impossible
25 * until an updated value is either set by user or by driver. Drivers do
26 * not need to touch other autosuspend settings.
27 *
28 * The block layer runtime PM is request based, so only works for drivers
29 * that use request as their IO unit instead of those directly use bio's.
30 */
blk_pm_runtime_init(struct request_queue * q,struct device * dev)31 void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
32 {
33 q->dev = dev;
34 q->rpm_status = RPM_ACTIVE;
35 pm_runtime_set_autosuspend_delay(q->dev, -1);
36 pm_runtime_use_autosuspend(q->dev);
37 }
38 EXPORT_SYMBOL(blk_pm_runtime_init);
39
40 /**
41 * blk_pre_runtime_suspend - Pre runtime suspend check
42 * @q: the queue of the device
43 *
44 * Description:
45 * This function will check if runtime suspend is allowed for the device
46 * by examining if there are any requests pending in the queue. If there
47 * are requests pending, the device can not be runtime suspended; otherwise,
48 * the queue's status will be updated to SUSPENDING and the driver can
49 * proceed to suspend the device.
50 *
51 * For the not allowed case, we mark last busy for the device so that
52 * runtime PM core will try to autosuspend it some time later.
53 *
54 * This function should be called near the start of the device's
55 * runtime_suspend callback.
56 *
57 * Return:
58 * 0 - OK to runtime suspend the device
59 * -EBUSY - Device should not be runtime suspended
60 */
blk_pre_runtime_suspend(struct request_queue * q)61 int blk_pre_runtime_suspend(struct request_queue *q)
62 {
63 int ret = 0;
64
65 if (!q->dev)
66 return ret;
67
68 WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE);
69
70 /*
71 * Increase the pm_only counter before checking whether any
72 * non-PM blk_queue_enter() calls are in progress to avoid that any
73 * new non-PM blk_queue_enter() calls succeed before the pm_only
74 * counter is decreased again.
75 */
76 blk_set_pm_only(q);
77 ret = -EBUSY;
78 /* Switch q_usage_counter from per-cpu to atomic mode. */
79 blk_freeze_queue_start(q);
80 /*
81 * Wait until atomic mode has been reached. Since that
82 * involves calling call_rcu(), it is guaranteed that later
83 * blk_queue_enter() calls see the pm-only state. See also
84 * http://lwn.net/Articles/573497/.
85 */
86 percpu_ref_switch_to_atomic_sync(&q->q_usage_counter);
87 if (percpu_ref_is_zero(&q->q_usage_counter))
88 ret = 0;
89 /* Switch q_usage_counter back to per-cpu mode. */
90 blk_mq_unfreeze_queue(q);
91
92 spin_lock_irq(&q->queue_lock);
93 if (ret < 0)
94 pm_runtime_mark_last_busy(q->dev);
95 else
96 q->rpm_status = RPM_SUSPENDING;
97 spin_unlock_irq(&q->queue_lock);
98
99 if (ret)
100 blk_clear_pm_only(q);
101
102 return ret;
103 }
104 EXPORT_SYMBOL(blk_pre_runtime_suspend);
105
106 /**
107 * blk_post_runtime_suspend - Post runtime suspend processing
108 * @q: the queue of the device
109 * @err: return value of the device's runtime_suspend function
110 *
111 * Description:
112 * Update the queue's runtime status according to the return value of the
113 * device's runtime suspend function and mark last busy for the device so
114 * that PM core will try to auto suspend the device at a later time.
115 *
116 * This function should be called near the end of the device's
117 * runtime_suspend callback.
118 */
blk_post_runtime_suspend(struct request_queue * q,int err)119 void blk_post_runtime_suspend(struct request_queue *q, int err)
120 {
121 if (!q->dev)
122 return;
123
124 spin_lock_irq(&q->queue_lock);
125 if (!err) {
126 q->rpm_status = RPM_SUSPENDED;
127 } else {
128 q->rpm_status = RPM_ACTIVE;
129 pm_runtime_mark_last_busy(q->dev);
130 }
131 spin_unlock_irq(&q->queue_lock);
132
133 if (err)
134 blk_clear_pm_only(q);
135 }
136 EXPORT_SYMBOL(blk_post_runtime_suspend);
137
138 /**
139 * blk_pre_runtime_resume - Pre runtime resume processing
140 * @q: the queue of the device
141 *
142 * Description:
143 * Update the queue's runtime status to RESUMING in preparation for the
144 * runtime resume of the device.
145 *
146 * This function should be called near the start of the device's
147 * runtime_resume callback.
148 */
blk_pre_runtime_resume(struct request_queue * q)149 void blk_pre_runtime_resume(struct request_queue *q)
150 {
151 if (!q->dev)
152 return;
153
154 spin_lock_irq(&q->queue_lock);
155 q->rpm_status = RPM_RESUMING;
156 spin_unlock_irq(&q->queue_lock);
157 }
158 EXPORT_SYMBOL(blk_pre_runtime_resume);
159
160 /**
161 * blk_post_runtime_resume - Post runtime resume processing
162 * @q: the queue of the device
163 * @err: return value of the device's runtime_resume function
164 *
165 * Description:
166 * Update the queue's runtime status according to the return value of the
167 * device's runtime_resume function. If it is successfully resumed, process
168 * the requests that are queued into the device's queue when it is resuming
169 * and then mark last busy and initiate autosuspend for it.
170 *
171 * This function should be called near the end of the device's
172 * runtime_resume callback.
173 */
blk_post_runtime_resume(struct request_queue * q,int err)174 void blk_post_runtime_resume(struct request_queue *q, int err)
175 {
176 if (!q->dev)
177 return;
178
179 spin_lock_irq(&q->queue_lock);
180 if (!err) {
181 q->rpm_status = RPM_ACTIVE;
182 pm_runtime_mark_last_busy(q->dev);
183 pm_request_autosuspend(q->dev);
184 } else {
185 q->rpm_status = RPM_SUSPENDED;
186 }
187 spin_unlock_irq(&q->queue_lock);
188
189 if (!err)
190 blk_clear_pm_only(q);
191 }
192 EXPORT_SYMBOL(blk_post_runtime_resume);
193
194 /**
195 * blk_set_runtime_active - Force runtime status of the queue to be active
196 * @q: the queue of the device
197 *
198 * If the device is left runtime suspended during system suspend the resume
199 * hook typically resumes the device and corrects runtime status
200 * accordingly. However, that does not affect the queue runtime PM status
201 * which is still "suspended". This prevents processing requests from the
202 * queue.
203 *
204 * This function can be used in driver's resume hook to correct queue
205 * runtime PM status and re-enable peeking requests from the queue. It
206 * should be called before first request is added to the queue.
207 */
blk_set_runtime_active(struct request_queue * q)208 void blk_set_runtime_active(struct request_queue *q)
209 {
210 if (q->dev) {
211 spin_lock_irq(&q->queue_lock);
212 q->rpm_status = RPM_ACTIVE;
213 pm_runtime_mark_last_busy(q->dev);
214 pm_request_autosuspend(q->dev);
215 spin_unlock_irq(&q->queue_lock);
216 }
217 }
218 EXPORT_SYMBOL(blk_set_runtime_active);
219