1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 * Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
5 *
6 * TODO: Need a big cleanup here. Basically, we need to have different
7 * cpufreq_driver structures for the different type of HW instead of the
8 * current mess. We also need to better deal with the detection of the
9 * type of machine.
10 */
11
12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
13
14 #include <linux/module.h>
15 #include <linux/types.h>
16 #include <linux/errno.h>
17 #include <linux/kernel.h>
18 #include <linux/delay.h>
19 #include <linux/sched.h>
20 #include <linux/adb.h>
21 #include <linux/pmu.h>
22 #include <linux/cpufreq.h>
23 #include <linux/init.h>
24 #include <linux/device.h>
25 #include <linux/hardirq.h>
26 #include <linux/of_device.h>
27 #include <asm/prom.h>
28 #include <asm/machdep.h>
29 #include <asm/irq.h>
30 #include <asm/pmac_feature.h>
31 #include <asm/mmu_context.h>
32 #include <asm/sections.h>
33 #include <asm/cputable.h>
34 #include <asm/time.h>
35 #include <asm/mpic.h>
36 #include <asm/keylargo.h>
37 #include <asm/switch_to.h>
38
39 /* WARNING !!! This will cause calibrate_delay() to be called,
40 * but this is an __init function ! So you MUST go edit
41 * init/main.c to make it non-init before enabling DEBUG_FREQ
42 */
43 #undef DEBUG_FREQ
44
45 extern void low_choose_7447a_dfs(int dfs);
46 extern void low_choose_750fx_pll(int pll);
47 extern void low_sleep_handler(void);
48
49 /*
50 * Currently, PowerMac cpufreq supports only high & low frequencies
51 * that are set by the firmware
52 */
53 static unsigned int low_freq;
54 static unsigned int hi_freq;
55 static unsigned int cur_freq;
56 static unsigned int sleep_freq;
57 static unsigned long transition_latency;
58
59 /*
60 * Different models uses different mechanisms to switch the frequency
61 */
62 static int (*set_speed_proc)(int low_speed);
63 static unsigned int (*get_speed_proc)(void);
64
65 /*
66 * Some definitions used by the various speedprocs
67 */
68 static u32 voltage_gpio;
69 static u32 frequency_gpio;
70 static u32 slew_done_gpio;
71 static int no_schedule;
72 static int has_cpu_l2lve;
73 static int is_pmu_based;
74
75 /* There are only two frequency states for each processor. Values
76 * are in kHz for the time being.
77 */
78 #define CPUFREQ_HIGH 0
79 #define CPUFREQ_LOW 1
80
81 static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
82 {0, CPUFREQ_HIGH, 0},
83 {0, CPUFREQ_LOW, 0},
84 {0, 0, CPUFREQ_TABLE_END},
85 };
86
local_delay(unsigned long ms)87 static inline void local_delay(unsigned long ms)
88 {
89 if (no_schedule)
90 mdelay(ms);
91 else
92 msleep(ms);
93 }
94
95 #ifdef DEBUG_FREQ
debug_calc_bogomips(void)96 static inline void debug_calc_bogomips(void)
97 {
98 /* This will cause a recalc of bogomips and display the
99 * result. We backup/restore the value to avoid affecting the
100 * core cpufreq framework's own calculation.
101 */
102 unsigned long save_lpj = loops_per_jiffy;
103 calibrate_delay();
104 loops_per_jiffy = save_lpj;
105 }
106 #endif /* DEBUG_FREQ */
107
108 /* Switch CPU speed under 750FX CPU control
109 */
cpu_750fx_cpu_speed(int low_speed)110 static int cpu_750fx_cpu_speed(int low_speed)
111 {
112 u32 hid2;
113
114 if (low_speed == 0) {
115 /* ramping up, set voltage first */
116 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
117 /* Make sure we sleep for at least 1ms */
118 local_delay(10);
119
120 /* tweak L2 for high voltage */
121 if (has_cpu_l2lve) {
122 hid2 = mfspr(SPRN_HID2);
123 hid2 &= ~0x2000;
124 mtspr(SPRN_HID2, hid2);
125 }
126 }
127 #ifdef CONFIG_PPC_BOOK3S_32
128 low_choose_750fx_pll(low_speed);
129 #endif
130 if (low_speed == 1) {
131 /* tweak L2 for low voltage */
132 if (has_cpu_l2lve) {
133 hid2 = mfspr(SPRN_HID2);
134 hid2 |= 0x2000;
135 mtspr(SPRN_HID2, hid2);
136 }
137
138 /* ramping down, set voltage last */
139 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
140 local_delay(10);
141 }
142
143 return 0;
144 }
145
cpu_750fx_get_cpu_speed(void)146 static unsigned int cpu_750fx_get_cpu_speed(void)
147 {
148 if (mfspr(SPRN_HID1) & HID1_PS)
149 return low_freq;
150 else
151 return hi_freq;
152 }
153
154 /* Switch CPU speed using DFS */
dfs_set_cpu_speed(int low_speed)155 static int dfs_set_cpu_speed(int low_speed)
156 {
157 if (low_speed == 0) {
158 /* ramping up, set voltage first */
159 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
160 /* Make sure we sleep for at least 1ms */
161 local_delay(1);
162 }
163
164 /* set frequency */
165 #ifdef CONFIG_PPC_BOOK3S_32
166 low_choose_7447a_dfs(low_speed);
167 #endif
168 udelay(100);
169
170 if (low_speed == 1) {
171 /* ramping down, set voltage last */
172 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
173 local_delay(1);
174 }
175
176 return 0;
177 }
178
dfs_get_cpu_speed(void)179 static unsigned int dfs_get_cpu_speed(void)
180 {
181 if (mfspr(SPRN_HID1) & HID1_DFS)
182 return low_freq;
183 else
184 return hi_freq;
185 }
186
187
188 /* Switch CPU speed using slewing GPIOs
189 */
gpios_set_cpu_speed(int low_speed)190 static int gpios_set_cpu_speed(int low_speed)
191 {
192 int gpio, timeout = 0;
193
194 /* If ramping up, set voltage first */
195 if (low_speed == 0) {
196 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
197 /* Delay is way too big but it's ok, we schedule */
198 local_delay(10);
199 }
200
201 /* Set frequency */
202 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
203 if (low_speed == ((gpio & 0x01) == 0))
204 goto skip;
205
206 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
207 low_speed ? 0x04 : 0x05);
208 udelay(200);
209 do {
210 if (++timeout > 100)
211 break;
212 local_delay(1);
213 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
214 } while((gpio & 0x02) == 0);
215 skip:
216 /* If ramping down, set voltage last */
217 if (low_speed == 1) {
218 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
219 /* Delay is way too big but it's ok, we schedule */
220 local_delay(10);
221 }
222
223 #ifdef DEBUG_FREQ
224 debug_calc_bogomips();
225 #endif
226
227 return 0;
228 }
229
230 /* Switch CPU speed under PMU control
231 */
pmu_set_cpu_speed(int low_speed)232 static int pmu_set_cpu_speed(int low_speed)
233 {
234 struct adb_request req;
235 unsigned long save_l2cr;
236 unsigned long save_l3cr;
237 unsigned int pic_prio;
238 unsigned long flags;
239
240 preempt_disable();
241
242 #ifdef DEBUG_FREQ
243 printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
244 #endif
245 pmu_suspend();
246
247 /* Disable all interrupt sources on openpic */
248 pic_prio = mpic_cpu_get_priority();
249 mpic_cpu_set_priority(0xf);
250
251 /* Make sure the decrementer won't interrupt us */
252 asm volatile("mtdec %0" : : "r" (0x7fffffff));
253 /* Make sure any pending DEC interrupt occurring while we did
254 * the above didn't re-enable the DEC */
255 mb();
256 asm volatile("mtdec %0" : : "r" (0x7fffffff));
257
258 /* We can now disable MSR_EE */
259 local_irq_save(flags);
260
261 /* Giveup the FPU & vec */
262 enable_kernel_fp();
263
264 #ifdef CONFIG_ALTIVEC
265 if (cpu_has_feature(CPU_FTR_ALTIVEC))
266 enable_kernel_altivec();
267 #endif /* CONFIG_ALTIVEC */
268
269 /* Save & disable L2 and L3 caches */
270 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
271 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
272
273 /* Send the new speed command. My assumption is that this command
274 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
275 */
276 pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
277 while (!req.complete)
278 pmu_poll();
279
280 /* Prepare the northbridge for the speed transition */
281 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
282
283 /* Call low level code to backup CPU state and recover from
284 * hardware reset
285 */
286 low_sleep_handler();
287
288 /* Restore the northbridge */
289 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
290
291 /* Restore L2 cache */
292 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
293 _set_L2CR(save_l2cr);
294 /* Restore L3 cache */
295 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
296 _set_L3CR(save_l3cr);
297
298 /* Restore userland MMU context */
299 switch_mmu_context(NULL, current->active_mm, NULL);
300
301 #ifdef DEBUG_FREQ
302 printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
303 #endif
304
305 /* Restore low level PMU operations */
306 pmu_unlock();
307
308 /*
309 * Restore decrementer; we'll take a decrementer interrupt
310 * as soon as interrupts are re-enabled and the generic
311 * clockevents code will reprogram it with the right value.
312 */
313 set_dec(1);
314
315 /* Restore interrupts */
316 mpic_cpu_set_priority(pic_prio);
317
318 /* Let interrupts flow again ... */
319 local_irq_restore(flags);
320
321 #ifdef DEBUG_FREQ
322 debug_calc_bogomips();
323 #endif
324
325 pmu_resume();
326
327 preempt_enable();
328
329 return 0;
330 }
331
do_set_cpu_speed(struct cpufreq_policy * policy,int speed_mode)332 static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode)
333 {
334 unsigned long l3cr;
335 static unsigned long prev_l3cr;
336
337 if (speed_mode == CPUFREQ_LOW &&
338 cpu_has_feature(CPU_FTR_L3CR)) {
339 l3cr = _get_L3CR();
340 if (l3cr & L3CR_L3E) {
341 prev_l3cr = l3cr;
342 _set_L3CR(0);
343 }
344 }
345 set_speed_proc(speed_mode == CPUFREQ_LOW);
346 if (speed_mode == CPUFREQ_HIGH &&
347 cpu_has_feature(CPU_FTR_L3CR)) {
348 l3cr = _get_L3CR();
349 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
350 _set_L3CR(prev_l3cr);
351 }
352 cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
353
354 return 0;
355 }
356
pmac_cpufreq_get_speed(unsigned int cpu)357 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
358 {
359 return cur_freq;
360 }
361
pmac_cpufreq_target(struct cpufreq_policy * policy,unsigned int index)362 static int pmac_cpufreq_target( struct cpufreq_policy *policy,
363 unsigned int index)
364 {
365 int rc;
366
367 rc = do_set_cpu_speed(policy, index);
368
369 ppc_proc_freq = cur_freq * 1000ul;
370 return rc;
371 }
372
pmac_cpufreq_cpu_init(struct cpufreq_policy * policy)373 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
374 {
375 cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency);
376 return 0;
377 }
378
read_gpio(struct device_node * np)379 static u32 read_gpio(struct device_node *np)
380 {
381 const u32 *reg = of_get_property(np, "reg", NULL);
382 u32 offset;
383
384 if (reg == NULL)
385 return 0;
386 /* That works for all keylargos but shall be fixed properly
387 * some day... The problem is that it seems we can't rely
388 * on the "reg" property of the GPIO nodes, they are either
389 * relative to the base of KeyLargo or to the base of the
390 * GPIO space, and the device-tree doesn't help.
391 */
392 offset = *reg;
393 if (offset < KEYLARGO_GPIO_LEVELS0)
394 offset += KEYLARGO_GPIO_LEVELS0;
395 return offset;
396 }
397
pmac_cpufreq_suspend(struct cpufreq_policy * policy)398 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
399 {
400 /* Ok, this could be made a bit smarter, but let's be robust for now. We
401 * always force a speed change to high speed before sleep, to make sure
402 * we have appropriate voltage and/or bus speed for the wakeup process,
403 * and to make sure our loops_per_jiffies are "good enough", that is will
404 * not cause too short delays if we sleep in low speed and wake in high
405 * speed..
406 */
407 no_schedule = 1;
408 sleep_freq = cur_freq;
409 if (cur_freq == low_freq && !is_pmu_based)
410 do_set_cpu_speed(policy, CPUFREQ_HIGH);
411 return 0;
412 }
413
pmac_cpufreq_resume(struct cpufreq_policy * policy)414 static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
415 {
416 /* If we resume, first check if we have a get() function */
417 if (get_speed_proc)
418 cur_freq = get_speed_proc();
419 else
420 cur_freq = 0;
421
422 /* We don't, hrm... we don't really know our speed here, best
423 * is that we force a switch to whatever it was, which is
424 * probably high speed due to our suspend() routine
425 */
426 do_set_cpu_speed(policy, sleep_freq == low_freq ?
427 CPUFREQ_LOW : CPUFREQ_HIGH);
428
429 ppc_proc_freq = cur_freq * 1000ul;
430
431 no_schedule = 0;
432 return 0;
433 }
434
435 static struct cpufreq_driver pmac_cpufreq_driver = {
436 .verify = cpufreq_generic_frequency_table_verify,
437 .target_index = pmac_cpufreq_target,
438 .get = pmac_cpufreq_get_speed,
439 .init = pmac_cpufreq_cpu_init,
440 .suspend = pmac_cpufreq_suspend,
441 .resume = pmac_cpufreq_resume,
442 .flags = CPUFREQ_PM_NO_WARN |
443 CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
444 .attr = cpufreq_generic_attr,
445 .name = "powermac",
446 };
447
448
pmac_cpufreq_init_MacRISC3(struct device_node * cpunode)449 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
450 {
451 struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
452 "voltage-gpio");
453 struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
454 "frequency-gpio");
455 struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
456 "slewing-done");
457 const u32 *value;
458
459 /*
460 * Check to see if it's GPIO driven or PMU only
461 *
462 * The way we extract the GPIO address is slightly hackish, but it
463 * works well enough for now. We need to abstract the whole GPIO
464 * stuff sooner or later anyway
465 */
466
467 if (volt_gpio_np)
468 voltage_gpio = read_gpio(volt_gpio_np);
469 if (freq_gpio_np)
470 frequency_gpio = read_gpio(freq_gpio_np);
471 if (slew_done_gpio_np)
472 slew_done_gpio = read_gpio(slew_done_gpio_np);
473
474 /* If we use the frequency GPIOs, calculate the min/max speeds based
475 * on the bus frequencies
476 */
477 if (frequency_gpio && slew_done_gpio) {
478 int lenp, rc;
479 const u32 *freqs, *ratio;
480
481 freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
482 lenp /= sizeof(u32);
483 if (freqs == NULL || lenp != 2) {
484 pr_err("bus-frequencies incorrect or missing\n");
485 return 1;
486 }
487 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
488 NULL);
489 if (ratio == NULL) {
490 pr_err("processor-to-bus-ratio*2 missing\n");
491 return 1;
492 }
493
494 /* Get the min/max bus frequencies */
495 low_freq = min(freqs[0], freqs[1]);
496 hi_freq = max(freqs[0], freqs[1]);
497
498 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
499 * frequency, it claims it to be around 84Mhz on some models while
500 * it appears to be approx. 101Mhz on all. Let's hack around here...
501 * fortunately, we don't need to be too precise
502 */
503 if (low_freq < 98000000)
504 low_freq = 101000000;
505
506 /* Convert those to CPU core clocks */
507 low_freq = (low_freq * (*ratio)) / 2000;
508 hi_freq = (hi_freq * (*ratio)) / 2000;
509
510 /* Now we get the frequencies, we read the GPIO to see what is out current
511 * speed
512 */
513 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
514 cur_freq = (rc & 0x01) ? hi_freq : low_freq;
515
516 set_speed_proc = gpios_set_cpu_speed;
517 return 1;
518 }
519
520 /* If we use the PMU, look for the min & max frequencies in the
521 * device-tree
522 */
523 value = of_get_property(cpunode, "min-clock-frequency", NULL);
524 if (!value)
525 return 1;
526 low_freq = (*value) / 1000;
527 /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
528 * here */
529 if (low_freq < 100000)
530 low_freq *= 10;
531
532 value = of_get_property(cpunode, "max-clock-frequency", NULL);
533 if (!value)
534 return 1;
535 hi_freq = (*value) / 1000;
536 set_speed_proc = pmu_set_cpu_speed;
537 is_pmu_based = 1;
538
539 return 0;
540 }
541
pmac_cpufreq_init_7447A(struct device_node * cpunode)542 static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
543 {
544 struct device_node *volt_gpio_np;
545
546 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
547 return 1;
548
549 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
550 if (volt_gpio_np)
551 voltage_gpio = read_gpio(volt_gpio_np);
552 of_node_put(volt_gpio_np);
553 if (!voltage_gpio){
554 pr_err("missing cpu-vcore-select gpio\n");
555 return 1;
556 }
557
558 /* OF only reports the high frequency */
559 hi_freq = cur_freq;
560 low_freq = cur_freq/2;
561
562 /* Read actual frequency from CPU */
563 cur_freq = dfs_get_cpu_speed();
564 set_speed_proc = dfs_set_cpu_speed;
565 get_speed_proc = dfs_get_cpu_speed;
566
567 return 0;
568 }
569
pmac_cpufreq_init_750FX(struct device_node * cpunode)570 static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
571 {
572 struct device_node *volt_gpio_np;
573 u32 pvr;
574 const u32 *value;
575
576 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
577 return 1;
578
579 hi_freq = cur_freq;
580 value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
581 if (!value)
582 return 1;
583 low_freq = (*value) / 1000;
584
585 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
586 if (volt_gpio_np)
587 voltage_gpio = read_gpio(volt_gpio_np);
588
589 of_node_put(volt_gpio_np);
590 pvr = mfspr(SPRN_PVR);
591 has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
592
593 set_speed_proc = cpu_750fx_cpu_speed;
594 get_speed_proc = cpu_750fx_get_cpu_speed;
595 cur_freq = cpu_750fx_get_cpu_speed();
596
597 return 0;
598 }
599
600 /* Currently, we support the following machines:
601 *
602 * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
603 * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
604 * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
605 * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
606 * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
607 * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
608 * - Recent MacRISC3 laptops
609 * - All new machines with 7447A CPUs
610 */
pmac_cpufreq_setup(void)611 static int __init pmac_cpufreq_setup(void)
612 {
613 struct device_node *cpunode;
614 const u32 *value;
615
616 if (strstr(boot_command_line, "nocpufreq"))
617 return 0;
618
619 /* Get first CPU node */
620 cpunode = of_cpu_device_node_get(0);
621 if (!cpunode)
622 goto out;
623
624 /* Get current cpu clock freq */
625 value = of_get_property(cpunode, "clock-frequency", NULL);
626 if (!value)
627 goto out;
628 cur_freq = (*value) / 1000;
629
630 /* Check for 7447A based MacRISC3 */
631 if (of_machine_is_compatible("MacRISC3") &&
632 of_get_property(cpunode, "dynamic-power-step", NULL) &&
633 PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
634 pmac_cpufreq_init_7447A(cpunode);
635
636 /* Allow dynamic switching */
637 transition_latency = 8000000;
638 pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING;
639 /* Check for other MacRISC3 machines */
640 } else if (of_machine_is_compatible("PowerBook3,4") ||
641 of_machine_is_compatible("PowerBook3,5") ||
642 of_machine_is_compatible("MacRISC3")) {
643 pmac_cpufreq_init_MacRISC3(cpunode);
644 /* Else check for iBook2 500/600 */
645 } else if (of_machine_is_compatible("PowerBook4,1")) {
646 hi_freq = cur_freq;
647 low_freq = 400000;
648 set_speed_proc = pmu_set_cpu_speed;
649 is_pmu_based = 1;
650 }
651 /* Else check for TiPb 550 */
652 else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
653 hi_freq = cur_freq;
654 low_freq = 500000;
655 set_speed_proc = pmu_set_cpu_speed;
656 is_pmu_based = 1;
657 }
658 /* Else check for TiPb 400 & 500 */
659 else if (of_machine_is_compatible("PowerBook3,2")) {
660 /* We only know about the 400 MHz and the 500Mhz model
661 * they both have 300 MHz as low frequency
662 */
663 if (cur_freq < 350000 || cur_freq > 550000)
664 goto out;
665 hi_freq = cur_freq;
666 low_freq = 300000;
667 set_speed_proc = pmu_set_cpu_speed;
668 is_pmu_based = 1;
669 }
670 /* Else check for 750FX */
671 else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
672 pmac_cpufreq_init_750FX(cpunode);
673 out:
674 of_node_put(cpunode);
675 if (set_speed_proc == NULL)
676 return -ENODEV;
677
678 pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
679 pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
680 ppc_proc_freq = cur_freq * 1000ul;
681
682 pr_info("Registering PowerMac CPU frequency driver\n");
683 pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
684 low_freq/1000, hi_freq/1000, cur_freq/1000);
685
686 return cpufreq_register_driver(&pmac_cpufreq_driver);
687 }
688
689 module_init(pmac_cpufreq_setup);
690
691