• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MC33880 high-side/low-side switch GPIO driver
4  * Copyright (c) 2009 Intel Corporation
5  */
6 
7 /* Supports:
8  * Freescale MC33880 high-side/low-side switch
9  */
10 
11 #include <linux/init.h>
12 #include <linux/mutex.h>
13 #include <linux/spi/spi.h>
14 #include <linux/spi/mc33880.h>
15 #include <linux/gpio/driver.h>
16 #include <linux/slab.h>
17 #include <linux/module.h>
18 
19 #define DRIVER_NAME "mc33880"
20 
21 /*
22  * Pin configurations, see MAX7301 datasheet page 6
23  */
24 #define PIN_CONFIG_MASK 0x03
25 #define PIN_CONFIG_IN_PULLUP 0x03
26 #define PIN_CONFIG_IN_WO_PULLUP 0x02
27 #define PIN_CONFIG_OUT 0x01
28 
29 #define PIN_NUMBER 8
30 
31 
32 /*
33  * Some registers must be read back to modify.
34  * To save time we cache them here in memory
35  */
36 struct mc33880 {
37 	struct mutex	lock;	/* protect from simultaneous accesses */
38 	u8		port_config;
39 	struct gpio_chip chip;
40 	struct spi_device *spi;
41 };
42 
mc33880_write_config(struct mc33880 * mc)43 static int mc33880_write_config(struct mc33880 *mc)
44 {
45 	return spi_write(mc->spi, &mc->port_config, sizeof(mc->port_config));
46 }
47 
48 
__mc33880_set(struct mc33880 * mc,unsigned offset,int value)49 static int __mc33880_set(struct mc33880 *mc, unsigned offset, int value)
50 {
51 	if (value)
52 		mc->port_config |= 1 << offset;
53 	else
54 		mc->port_config &= ~(1 << offset);
55 
56 	return mc33880_write_config(mc);
57 }
58 
59 
mc33880_set(struct gpio_chip * chip,unsigned offset,int value)60 static void mc33880_set(struct gpio_chip *chip, unsigned offset, int value)
61 {
62 	struct mc33880 *mc = gpiochip_get_data(chip);
63 
64 	mutex_lock(&mc->lock);
65 
66 	__mc33880_set(mc, offset, value);
67 
68 	mutex_unlock(&mc->lock);
69 }
70 
mc33880_probe(struct spi_device * spi)71 static int mc33880_probe(struct spi_device *spi)
72 {
73 	struct mc33880 *mc;
74 	struct mc33880_platform_data *pdata;
75 	int ret;
76 
77 	pdata = dev_get_platdata(&spi->dev);
78 	if (!pdata || !pdata->base) {
79 		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
80 		return -EINVAL;
81 	}
82 
83 	/*
84 	 * bits_per_word cannot be configured in platform data
85 	 */
86 	spi->bits_per_word = 8;
87 
88 	ret = spi_setup(spi);
89 	if (ret < 0)
90 		return ret;
91 
92 	mc = devm_kzalloc(&spi->dev, sizeof(struct mc33880), GFP_KERNEL);
93 	if (!mc)
94 		return -ENOMEM;
95 
96 	mutex_init(&mc->lock);
97 
98 	spi_set_drvdata(spi, mc);
99 
100 	mc->spi = spi;
101 
102 	mc->chip.label = DRIVER_NAME,
103 	mc->chip.set = mc33880_set;
104 	mc->chip.base = pdata->base;
105 	mc->chip.ngpio = PIN_NUMBER;
106 	mc->chip.can_sleep = true;
107 	mc->chip.parent = &spi->dev;
108 	mc->chip.owner = THIS_MODULE;
109 
110 	mc->port_config = 0x00;
111 	/* write twice, because during initialisation the first setting
112 	 * is just for testing SPI communication, and the second is the
113 	 * "real" configuration
114 	 */
115 	ret = mc33880_write_config(mc);
116 	mc->port_config = 0x00;
117 	if (!ret)
118 		ret = mc33880_write_config(mc);
119 
120 	if (ret) {
121 		dev_err(&spi->dev, "Failed writing to " DRIVER_NAME ": %d\n",
122 			ret);
123 		goto exit_destroy;
124 	}
125 
126 	ret = gpiochip_add_data(&mc->chip, mc);
127 	if (ret)
128 		goto exit_destroy;
129 
130 	return ret;
131 
132 exit_destroy:
133 	mutex_destroy(&mc->lock);
134 	return ret;
135 }
136 
mc33880_remove(struct spi_device * spi)137 static int mc33880_remove(struct spi_device *spi)
138 {
139 	struct mc33880 *mc;
140 
141 	mc = spi_get_drvdata(spi);
142 	if (!mc)
143 		return -ENODEV;
144 
145 	gpiochip_remove(&mc->chip);
146 	mutex_destroy(&mc->lock);
147 
148 	return 0;
149 }
150 
151 static struct spi_driver mc33880_driver = {
152 	.driver = {
153 		.name		= DRIVER_NAME,
154 	},
155 	.probe		= mc33880_probe,
156 	.remove		= mc33880_remove,
157 };
158 
mc33880_init(void)159 static int __init mc33880_init(void)
160 {
161 	return spi_register_driver(&mc33880_driver);
162 }
163 /* register after spi postcore initcall and before
164  * subsys initcalls that may rely on these GPIOs
165  */
166 subsys_initcall(mc33880_init);
167 
mc33880_exit(void)168 static void __exit mc33880_exit(void)
169 {
170 	spi_unregister_driver(&mc33880_driver);
171 }
172 module_exit(mc33880_exit);
173 
174 MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
175 MODULE_LICENSE("GPL v2");
176 
177