1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * VIA IDE driver for Linux. Supported southbridges:
4 *
5 * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
6 * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
7 * vt8235, vt8237, vt8237a
8 *
9 * Copyright (c) 2000-2002 Vojtech Pavlik
10 * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
11 *
12 * Based on the work of:
13 * Michel Aubry
14 * Jeff Garzik
15 * Andre Hedrick
16 *
17 * Documentation:
18 * Obsolete device documentation publicly available from via.com.tw
19 * Current device documentation available under NDA only
20 */
21
22
23 #include <linux/module.h>
24 #include <linux/kernel.h>
25 #include <linux/slab.h>
26 #include <linux/pci.h>
27 #include <linux/init.h>
28 #include <linux/ide.h>
29 #include <linux/dmi.h>
30
31 #ifdef CONFIG_PPC_CHRP
32 #include <asm/processor.h>
33 #endif
34
35 #define DRV_NAME "via82cxxx"
36
37 #define VIA_IDE_ENABLE 0x40
38 #define VIA_IDE_CONFIG 0x41
39 #define VIA_FIFO_CONFIG 0x43
40 #define VIA_MISC_1 0x44
41 #define VIA_MISC_2 0x45
42 #define VIA_MISC_3 0x46
43 #define VIA_DRIVE_TIMING 0x48
44 #define VIA_8BIT_TIMING 0x4e
45 #define VIA_ADDRESS_SETUP 0x4c
46 #define VIA_UDMA_TIMING 0x50
47
48 #define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
49 #define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
50 #define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
51 #define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
52 #define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
53 #define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
54 #define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */
55
56 enum {
57 VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
58 };
59
60 /*
61 * VIA SouthBridge chips.
62 */
63
64 static struct via_isa_bridge {
65 char *name;
66 u16 id;
67 u8 rev_min;
68 u8 rev_max;
69 u8 udma_mask;
70 u8 flags;
71 } via_isa_bridges[] = {
72 { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
73 { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
74 { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
75 { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
76 { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
77 { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
78 { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
79 { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
80 { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
81 { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
82 { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
83 { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
84 { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
85 { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
86 { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
87 { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
88 { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
89 { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
90 { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
91 { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
92 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
93 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
94 { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
95 { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
96 { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
97 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
98 { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
99 { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
100 { NULL }
101 };
102
103 static unsigned int via_clock;
104 static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
105
106 struct via82cxxx_dev
107 {
108 struct via_isa_bridge *via_config;
109 unsigned int via_80w;
110 };
111
112 /**
113 * via_set_speed - write timing registers
114 * @dev: PCI device
115 * @dn: device
116 * @timing: IDE timing data to use
117 *
118 * via_set_speed writes timing values to the chipset registers
119 */
120
via_set_speed(ide_hwif_t * hwif,u8 dn,struct ide_timing * timing)121 static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
122 {
123 struct pci_dev *dev = to_pci_dev(hwif->dev);
124 struct ide_host *host = pci_get_drvdata(dev);
125 struct via82cxxx_dev *vdev = host->host_priv;
126 u8 t;
127
128 if (~vdev->via_config->flags & VIA_BAD_AST) {
129 pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
130 t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
131 pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
132 }
133
134 pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
135 ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
136
137 pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
138 ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
139
140 switch (vdev->via_config->udma_mask) {
141 case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
142 case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
143 case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
144 case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
145 }
146
147 /* Set UDMA unless device is not UDMA capable */
148 if (vdev->via_config->udma_mask) {
149 u8 udma_etc;
150
151 pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
152
153 /* clear transfer mode bit */
154 udma_etc &= ~0x20;
155
156 if (timing->udma) {
157 /* preserve 80-wire cable detection bit */
158 udma_etc &= 0x10;
159 udma_etc |= t;
160 }
161
162 pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
163 }
164 }
165
166 /**
167 * via_set_drive - configure transfer mode
168 * @hwif: port
169 * @drive: Drive to set up
170 *
171 * via_set_drive() computes timing values configures the chipset to
172 * a desired transfer mode. It also can be called by upper layers.
173 */
174
via_set_drive(ide_hwif_t * hwif,ide_drive_t * drive)175 static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
176 {
177 ide_drive_t *peer = ide_get_pair_dev(drive);
178 struct pci_dev *dev = to_pci_dev(hwif->dev);
179 struct ide_host *host = pci_get_drvdata(dev);
180 struct via82cxxx_dev *vdev = host->host_priv;
181 struct ide_timing t, p;
182 unsigned int T, UT;
183 const u8 speed = drive->dma_mode;
184
185 T = 1000000000 / via_clock;
186
187 switch (vdev->via_config->udma_mask) {
188 case ATA_UDMA2: UT = T; break;
189 case ATA_UDMA4: UT = T/2; break;
190 case ATA_UDMA5: UT = T/3; break;
191 case ATA_UDMA6: UT = T/4; break;
192 default: UT = T;
193 }
194
195 ide_timing_compute(drive, speed, &t, T, UT);
196
197 if (peer) {
198 ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
199 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
200 }
201
202 via_set_speed(hwif, drive->dn, &t);
203 }
204
205 /**
206 * via_set_pio_mode - set host controller for PIO mode
207 * @hwif: port
208 * @drive: drive
209 *
210 * A callback from the upper layers for PIO-only tuning.
211 */
212
via_set_pio_mode(ide_hwif_t * hwif,ide_drive_t * drive)213 static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
214 {
215 drive->dma_mode = drive->pio_mode;
216 via_set_drive(hwif, drive);
217 }
218
via_config_find(struct pci_dev ** isa)219 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
220 {
221 struct via_isa_bridge *via_config;
222
223 for (via_config = via_isa_bridges;
224 via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
225 if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
226 !!(via_config->flags & VIA_BAD_ID),
227 via_config->id, NULL))) {
228
229 if ((*isa)->revision >= via_config->rev_min &&
230 (*isa)->revision <= via_config->rev_max)
231 break;
232 pci_dev_put(*isa);
233 }
234
235 return via_config;
236 }
237
238 /*
239 * Check and handle 80-wire cable presence
240 */
via_cable_detect(struct via82cxxx_dev * vdev,u32 u)241 static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
242 {
243 int i;
244
245 switch (vdev->via_config->udma_mask) {
246 case ATA_UDMA4:
247 for (i = 24; i >= 0; i -= 8)
248 if (((u >> (i & 16)) & 8) &&
249 ((u >> i) & 0x20) &&
250 (((u >> i) & 7) < 2)) {
251 /*
252 * 2x PCI clock and
253 * UDMA w/ < 3T/cycle
254 */
255 vdev->via_80w |= (1 << (1 - (i >> 4)));
256 }
257 break;
258
259 case ATA_UDMA5:
260 for (i = 24; i >= 0; i -= 8)
261 if (((u >> i) & 0x10) ||
262 (((u >> i) & 0x20) &&
263 (((u >> i) & 7) < 4))) {
264 /* BIOS 80-wire bit or
265 * UDMA w/ < 60ns/cycle
266 */
267 vdev->via_80w |= (1 << (1 - (i >> 4)));
268 }
269 break;
270
271 case ATA_UDMA6:
272 for (i = 24; i >= 0; i -= 8)
273 if (((u >> i) & 0x10) ||
274 (((u >> i) & 0x20) &&
275 (((u >> i) & 7) < 6))) {
276 /* BIOS 80-wire bit or
277 * UDMA w/ < 60ns/cycle
278 */
279 vdev->via_80w |= (1 << (1 - (i >> 4)));
280 }
281 break;
282 }
283 }
284
285 /**
286 * init_chipset_via82cxxx - initialization handler
287 * @dev: PCI device
288 *
289 * The initialization callback. Here we determine the IDE chip type
290 * and initialize its drive independent registers.
291 */
292
init_chipset_via82cxxx(struct pci_dev * dev)293 static int init_chipset_via82cxxx(struct pci_dev *dev)
294 {
295 struct ide_host *host = pci_get_drvdata(dev);
296 struct via82cxxx_dev *vdev = host->host_priv;
297 struct via_isa_bridge *via_config = vdev->via_config;
298 u8 t, v;
299 u32 u;
300
301 /*
302 * Detect cable and configure Clk66
303 */
304 pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
305
306 via_cable_detect(vdev, u);
307
308 if (via_config->udma_mask == ATA_UDMA4) {
309 /* Enable Clk66 */
310 pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
311 } else if (via_config->flags & VIA_BAD_CLK66) {
312 /* Would cause trouble on 596a and 686 */
313 pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
314 }
315
316 /*
317 * Check whether interfaces are enabled.
318 */
319
320 pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
321
322 /*
323 * Set up FIFO sizes and thresholds.
324 */
325
326 pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
327
328 /* Disable PREQ# till DDACK# */
329 if (via_config->flags & VIA_BAD_PREQ) {
330 /* Would crash on 586b rev 41 */
331 t &= 0x7f;
332 }
333
334 /* Fix FIFO split between channels */
335 if (via_config->flags & VIA_SET_FIFO) {
336 t &= (t & 0x9f);
337 switch (v & 3) {
338 case 2: t |= 0x00; break; /* 16 on primary */
339 case 1: t |= 0x60; break; /* 16 on secondary */
340 case 3: t |= 0x20; break; /* 8 pri 8 sec */
341 }
342 }
343
344 pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
345
346 return 0;
347 }
348
349 /*
350 * Cable special cases
351 */
352
353 static const struct dmi_system_id cable_dmi_table[] = {
354 {
355 .ident = "Acer Ferrari 3400",
356 .matches = {
357 DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
358 DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
359 },
360 },
361 { }
362 };
363
via_cable_override(struct pci_dev * pdev)364 static int via_cable_override(struct pci_dev *pdev)
365 {
366 /* Systems by DMI */
367 if (dmi_check_system(cable_dmi_table))
368 return 1;
369
370 /* Arima W730-K8/Targa Visionary 811/... */
371 if (pdev->subsystem_vendor == 0x161F &&
372 pdev->subsystem_device == 0x2032)
373 return 1;
374
375 return 0;
376 }
377
via82cxxx_cable_detect(ide_hwif_t * hwif)378 static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
379 {
380 struct pci_dev *pdev = to_pci_dev(hwif->dev);
381 struct ide_host *host = pci_get_drvdata(pdev);
382 struct via82cxxx_dev *vdev = host->host_priv;
383
384 if (via_cable_override(pdev))
385 return ATA_CBL_PATA40_SHORT;
386
387 if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
388 return ATA_CBL_SATA;
389
390 if ((vdev->via_80w >> hwif->channel) & 1)
391 return ATA_CBL_PATA80;
392 else
393 return ATA_CBL_PATA40;
394 }
395
396 static const struct ide_port_ops via_port_ops = {
397 .set_pio_mode = via_set_pio_mode,
398 .set_dma_mode = via_set_drive,
399 .cable_detect = via82cxxx_cable_detect,
400 };
401
402 static const struct ide_port_info via82cxxx_chipset = {
403 .name = DRV_NAME,
404 .init_chipset = init_chipset_via82cxxx,
405 .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
406 .port_ops = &via_port_ops,
407 .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
408 IDE_HFLAG_POST_SET_MODE |
409 IDE_HFLAG_IO_32BIT,
410 .pio_mask = ATA_PIO5,
411 .swdma_mask = ATA_SWDMA2,
412 .mwdma_mask = ATA_MWDMA2,
413 };
414
via_init_one(struct pci_dev * dev,const struct pci_device_id * id)415 static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
416 {
417 struct pci_dev *isa = NULL;
418 struct via_isa_bridge *via_config;
419 struct via82cxxx_dev *vdev;
420 int rc;
421 u8 idx = id->driver_data;
422 struct ide_port_info d;
423
424 d = via82cxxx_chipset;
425
426 /*
427 * Find the ISA bridge and check we know what it is.
428 */
429 via_config = via_config_find(&isa);
430
431 /*
432 * Print the boot message.
433 */
434 printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
435 pci_name(dev), via_config->name, isa->revision,
436 via_config->udma_mask ? "U" : "MW",
437 via_dma[via_config->udma_mask ?
438 (fls(via_config->udma_mask) - 1) : 0]);
439
440 pci_dev_put(isa);
441
442 /*
443 * Determine system bus clock.
444 */
445 via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
446
447 switch (via_clock) {
448 case 33000: via_clock = 33333; break;
449 case 37000: via_clock = 37500; break;
450 case 41000: via_clock = 41666; break;
451 }
452
453 if (via_clock < 20000 || via_clock > 50000) {
454 printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
455 "impossible (%d), using 33 MHz instead.\n", via_clock);
456 via_clock = 33333;
457 }
458
459 if (idx == 1)
460 d.enablebits[1].reg = d.enablebits[0].reg = 0;
461 else
462 d.host_flags |= IDE_HFLAG_NO_AUTODMA;
463
464 if (idx == VIA_IDFLAG_SINGLE)
465 d.host_flags |= IDE_HFLAG_SINGLE;
466
467 if ((via_config->flags & VIA_NO_UNMASK) == 0)
468 d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
469
470 d.udma_mask = via_config->udma_mask;
471
472 vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
473 if (!vdev) {
474 printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
475 pci_name(dev));
476 return -ENOMEM;
477 }
478
479 vdev->via_config = via_config;
480
481 rc = ide_pci_init_one(dev, &d, vdev);
482 if (rc)
483 kfree(vdev);
484
485 return rc;
486 }
487
via_remove(struct pci_dev * dev)488 static void via_remove(struct pci_dev *dev)
489 {
490 struct ide_host *host = pci_get_drvdata(dev);
491 struct via82cxxx_dev *vdev = host->host_priv;
492
493 ide_pci_remove(dev);
494 kfree(vdev);
495 }
496
497 static const struct pci_device_id via_pci_tbl[] = {
498 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
499 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
500 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
501 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
502 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
503 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 },
504 { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
505 { 0, },
506 };
507 MODULE_DEVICE_TABLE(pci, via_pci_tbl);
508
509 static struct pci_driver via_pci_driver = {
510 .name = "VIA_IDE",
511 .id_table = via_pci_tbl,
512 .probe = via_init_one,
513 .remove = via_remove,
514 .suspend = ide_pci_suspend,
515 .resume = ide_pci_resume,
516 };
517
via_ide_init(void)518 static int __init via_ide_init(void)
519 {
520 return ide_pci_register_driver(&via_pci_driver);
521 }
522
via_ide_exit(void)523 static void __exit via_ide_exit(void)
524 {
525 pci_unregister_driver(&via_pci_driver);
526 }
527
528 module_init(via_ide_init);
529 module_exit(via_ide_exit);
530
531 MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
532 MODULE_DESCRIPTION("PCI driver module for VIA IDE");
533 MODULE_LICENSE("GPL");
534