1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * TI LP8860 4-Channel LED Driver
4 *
5 * Copyright (C) 2014 Texas Instruments
6 *
7 * Author: Dan Murphy <dmurphy@ti.com>
8 */
9
10 #include <linux/i2c.h>
11 #include <linux/init.h>
12 #include <linux/leds.h>
13 #include <linux/regmap.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/module.h>
16 #include <linux/mutex.h>
17 #include <linux/of.h>
18 #include <linux/of_gpio.h>
19 #include <linux/gpio/consumer.h>
20 #include <linux/slab.h>
21
22 #define LP8860_DISP_CL1_BRT_MSB 0x00
23 #define LP8860_DISP_CL1_BRT_LSB 0x01
24 #define LP8860_DISP_CL1_CURR_MSB 0x02
25 #define LP8860_DISP_CL1_CURR_LSB 0x03
26 #define LP8860_CL2_BRT_MSB 0x04
27 #define LP8860_CL2_BRT_LSB 0x05
28 #define LP8860_CL2_CURRENT 0x06
29 #define LP8860_CL3_BRT_MSB 0x07
30 #define LP8860_CL3_BRT_LSB 0x08
31 #define LP8860_CL3_CURRENT 0x09
32 #define LP8860_CL4_BRT_MSB 0x0a
33 #define LP8860_CL4_BRT_LSB 0x0b
34 #define LP8860_CL4_CURRENT 0x0c
35 #define LP8860_CONFIG 0x0d
36 #define LP8860_STATUS 0x0e
37 #define LP8860_FAULT 0x0f
38 #define LP8860_LED_FAULT 0x10
39 #define LP8860_FAULT_CLEAR 0x11
40 #define LP8860_ID 0x12
41 #define LP8860_TEMP_MSB 0x13
42 #define LP8860_TEMP_LSB 0x14
43 #define LP8860_DISP_LED_CURR_MSB 0x15
44 #define LP8860_DISP_LED_CURR_LSB 0x16
45 #define LP8860_DISP_LED_PWM_MSB 0x17
46 #define LP8860_DISP_LED_PWM_LSB 0x18
47 #define LP8860_EEPROM_CNTRL 0x19
48 #define LP8860_EEPROM_UNLOCK 0x1a
49
50 #define LP8860_EEPROM_REG_0 0x60
51 #define LP8860_EEPROM_REG_1 0x61
52 #define LP8860_EEPROM_REG_2 0x62
53 #define LP8860_EEPROM_REG_3 0x63
54 #define LP8860_EEPROM_REG_4 0x64
55 #define LP8860_EEPROM_REG_5 0x65
56 #define LP8860_EEPROM_REG_6 0x66
57 #define LP8860_EEPROM_REG_7 0x67
58 #define LP8860_EEPROM_REG_8 0x68
59 #define LP8860_EEPROM_REG_9 0x69
60 #define LP8860_EEPROM_REG_10 0x6a
61 #define LP8860_EEPROM_REG_11 0x6b
62 #define LP8860_EEPROM_REG_12 0x6c
63 #define LP8860_EEPROM_REG_13 0x6d
64 #define LP8860_EEPROM_REG_14 0x6e
65 #define LP8860_EEPROM_REG_15 0x6f
66 #define LP8860_EEPROM_REG_16 0x70
67 #define LP8860_EEPROM_REG_17 0x71
68 #define LP8860_EEPROM_REG_18 0x72
69 #define LP8860_EEPROM_REG_19 0x73
70 #define LP8860_EEPROM_REG_20 0x74
71 #define LP8860_EEPROM_REG_21 0x75
72 #define LP8860_EEPROM_REG_22 0x76
73 #define LP8860_EEPROM_REG_23 0x77
74 #define LP8860_EEPROM_REG_24 0x78
75
76 #define LP8860_LOCK_EEPROM 0x00
77 #define LP8860_UNLOCK_EEPROM 0x01
78 #define LP8860_PROGRAM_EEPROM 0x02
79 #define LP8860_EEPROM_CODE_1 0x08
80 #define LP8860_EEPROM_CODE_2 0xba
81 #define LP8860_EEPROM_CODE_3 0xef
82
83 #define LP8860_CLEAR_FAULTS 0x01
84
85 #define LP8860_NAME "lp8860"
86
87 /**
88 * struct lp8860_led -
89 * @lock - Lock for reading/writing the device
90 * @client - Pointer to the I2C client
91 * @led_dev - led class device pointer
92 * @regmap - Devices register map
93 * @eeprom_regmap - EEPROM register map
94 * @enable_gpio - VDDIO/EN gpio to enable communication interface
95 * @regulator - LED supply regulator pointer
96 */
97 struct lp8860_led {
98 struct mutex lock;
99 struct i2c_client *client;
100 struct led_classdev led_dev;
101 struct regmap *regmap;
102 struct regmap *eeprom_regmap;
103 struct gpio_desc *enable_gpio;
104 struct regulator *regulator;
105 };
106
107 struct lp8860_eeprom_reg {
108 uint8_t reg;
109 uint8_t value;
110 };
111
112 static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
113 { LP8860_EEPROM_REG_0, 0xed },
114 { LP8860_EEPROM_REG_1, 0xdf },
115 { LP8860_EEPROM_REG_2, 0xdc },
116 { LP8860_EEPROM_REG_3, 0xf0 },
117 { LP8860_EEPROM_REG_4, 0xdf },
118 { LP8860_EEPROM_REG_5, 0xe5 },
119 { LP8860_EEPROM_REG_6, 0xf2 },
120 { LP8860_EEPROM_REG_7, 0x77 },
121 { LP8860_EEPROM_REG_8, 0x77 },
122 { LP8860_EEPROM_REG_9, 0x71 },
123 { LP8860_EEPROM_REG_10, 0x3f },
124 { LP8860_EEPROM_REG_11, 0xb7 },
125 { LP8860_EEPROM_REG_12, 0x17 },
126 { LP8860_EEPROM_REG_13, 0xef },
127 { LP8860_EEPROM_REG_14, 0xb0 },
128 { LP8860_EEPROM_REG_15, 0x87 },
129 { LP8860_EEPROM_REG_16, 0xce },
130 { LP8860_EEPROM_REG_17, 0x72 },
131 { LP8860_EEPROM_REG_18, 0xe5 },
132 { LP8860_EEPROM_REG_19, 0xdf },
133 { LP8860_EEPROM_REG_20, 0x35 },
134 { LP8860_EEPROM_REG_21, 0x06 },
135 { LP8860_EEPROM_REG_22, 0xdc },
136 { LP8860_EEPROM_REG_23, 0x88 },
137 { LP8860_EEPROM_REG_24, 0x3E },
138 };
139
lp8860_unlock_eeprom(struct lp8860_led * led,int lock)140 static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
141 {
142 int ret;
143
144 mutex_lock(&led->lock);
145
146 if (lock == LP8860_UNLOCK_EEPROM) {
147 ret = regmap_write(led->regmap,
148 LP8860_EEPROM_UNLOCK,
149 LP8860_EEPROM_CODE_1);
150 if (ret) {
151 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
152 goto out;
153 }
154
155 ret = regmap_write(led->regmap,
156 LP8860_EEPROM_UNLOCK,
157 LP8860_EEPROM_CODE_2);
158 if (ret) {
159 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
160 goto out;
161 }
162 ret = regmap_write(led->regmap,
163 LP8860_EEPROM_UNLOCK,
164 LP8860_EEPROM_CODE_3);
165 if (ret) {
166 dev_err(&led->client->dev, "EEPROM Unlock failed\n");
167 goto out;
168 }
169 } else {
170 ret = regmap_write(led->regmap,
171 LP8860_EEPROM_UNLOCK,
172 LP8860_LOCK_EEPROM);
173 }
174
175 out:
176 mutex_unlock(&led->lock);
177 return ret;
178 }
179
lp8860_fault_check(struct lp8860_led * led)180 static int lp8860_fault_check(struct lp8860_led *led)
181 {
182 int ret, fault;
183 unsigned int read_buf;
184
185 ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
186 if (ret)
187 goto out;
188
189 fault = read_buf;
190
191 ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
192 if (ret)
193 goto out;
194
195 fault |= read_buf;
196
197 /* Attempt to clear any faults */
198 if (fault)
199 ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
200 LP8860_CLEAR_FAULTS);
201 out:
202 return ret;
203 }
204
lp8860_brightness_set(struct led_classdev * led_cdev,enum led_brightness brt_val)205 static int lp8860_brightness_set(struct led_classdev *led_cdev,
206 enum led_brightness brt_val)
207 {
208 struct lp8860_led *led =
209 container_of(led_cdev, struct lp8860_led, led_dev);
210 int disp_brightness = brt_val * 255;
211 int ret;
212
213 mutex_lock(&led->lock);
214
215 ret = lp8860_fault_check(led);
216 if (ret) {
217 dev_err(&led->client->dev, "Cannot read/clear faults\n");
218 goto out;
219 }
220
221 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
222 (disp_brightness & 0xff00) >> 8);
223 if (ret) {
224 dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
225 goto out;
226 }
227
228 ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
229 disp_brightness & 0xff);
230 if (ret) {
231 dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
232 goto out;
233 }
234 out:
235 mutex_unlock(&led->lock);
236 return ret;
237 }
238
lp8860_init(struct lp8860_led * led)239 static int lp8860_init(struct lp8860_led *led)
240 {
241 unsigned int read_buf;
242 int ret, i, reg_count;
243
244 if (led->regulator) {
245 ret = regulator_enable(led->regulator);
246 if (ret) {
247 dev_err(&led->client->dev,
248 "Failed to enable regulator\n");
249 return ret;
250 }
251 }
252
253 if (led->enable_gpio)
254 gpiod_direction_output(led->enable_gpio, 1);
255
256 ret = lp8860_fault_check(led);
257 if (ret)
258 goto out;
259
260 ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
261 if (ret)
262 goto out;
263
264 ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
265 if (ret) {
266 dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
267 goto out;
268 }
269
270 reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
271 for (i = 0; i < reg_count; i++) {
272 ret = regmap_write(led->eeprom_regmap,
273 lp8860_eeprom_disp_regs[i].reg,
274 lp8860_eeprom_disp_regs[i].value);
275 if (ret) {
276 dev_err(&led->client->dev, "Failed writing EEPROM\n");
277 goto out;
278 }
279 }
280
281 ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
282 if (ret)
283 goto out;
284
285 ret = regmap_write(led->regmap,
286 LP8860_EEPROM_CNTRL,
287 LP8860_PROGRAM_EEPROM);
288 if (ret) {
289 dev_err(&led->client->dev, "Failed programming EEPROM\n");
290 goto out;
291 }
292
293 return ret;
294
295 out:
296 if (ret)
297 if (led->enable_gpio)
298 gpiod_direction_output(led->enable_gpio, 0);
299
300 if (led->regulator) {
301 ret = regulator_disable(led->regulator);
302 if (ret)
303 dev_err(&led->client->dev,
304 "Failed to disable regulator\n");
305 }
306
307 return ret;
308 }
309
310 static const struct reg_default lp8860_reg_defs[] = {
311 { LP8860_DISP_CL1_BRT_MSB, 0x00},
312 { LP8860_DISP_CL1_BRT_LSB, 0x00},
313 { LP8860_DISP_CL1_CURR_MSB, 0x00},
314 { LP8860_DISP_CL1_CURR_LSB, 0x00},
315 { LP8860_CL2_BRT_MSB, 0x00},
316 { LP8860_CL2_BRT_LSB, 0x00},
317 { LP8860_CL2_CURRENT, 0x00},
318 { LP8860_CL3_BRT_MSB, 0x00},
319 { LP8860_CL3_BRT_LSB, 0x00},
320 { LP8860_CL3_CURRENT, 0x00},
321 { LP8860_CL4_BRT_MSB, 0x00},
322 { LP8860_CL4_BRT_LSB, 0x00},
323 { LP8860_CL4_CURRENT, 0x00},
324 { LP8860_CONFIG, 0x00},
325 { LP8860_FAULT_CLEAR, 0x00},
326 { LP8860_EEPROM_CNTRL, 0x80},
327 { LP8860_EEPROM_UNLOCK, 0x00},
328 };
329
330 static const struct regmap_config lp8860_regmap_config = {
331 .reg_bits = 8,
332 .val_bits = 8,
333
334 .max_register = LP8860_EEPROM_UNLOCK,
335 .reg_defaults = lp8860_reg_defs,
336 .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
337 .cache_type = REGCACHE_NONE,
338 };
339
340 static const struct reg_default lp8860_eeprom_defs[] = {
341 { LP8860_EEPROM_REG_0, 0x00 },
342 { LP8860_EEPROM_REG_1, 0x00 },
343 { LP8860_EEPROM_REG_2, 0x00 },
344 { LP8860_EEPROM_REG_3, 0x00 },
345 { LP8860_EEPROM_REG_4, 0x00 },
346 { LP8860_EEPROM_REG_5, 0x00 },
347 { LP8860_EEPROM_REG_6, 0x00 },
348 { LP8860_EEPROM_REG_7, 0x00 },
349 { LP8860_EEPROM_REG_8, 0x00 },
350 { LP8860_EEPROM_REG_9, 0x00 },
351 { LP8860_EEPROM_REG_10, 0x00 },
352 { LP8860_EEPROM_REG_11, 0x00 },
353 { LP8860_EEPROM_REG_12, 0x00 },
354 { LP8860_EEPROM_REG_13, 0x00 },
355 { LP8860_EEPROM_REG_14, 0x00 },
356 { LP8860_EEPROM_REG_15, 0x00 },
357 { LP8860_EEPROM_REG_16, 0x00 },
358 { LP8860_EEPROM_REG_17, 0x00 },
359 { LP8860_EEPROM_REG_18, 0x00 },
360 { LP8860_EEPROM_REG_19, 0x00 },
361 { LP8860_EEPROM_REG_20, 0x00 },
362 { LP8860_EEPROM_REG_21, 0x00 },
363 { LP8860_EEPROM_REG_22, 0x00 },
364 { LP8860_EEPROM_REG_23, 0x00 },
365 { LP8860_EEPROM_REG_24, 0x00 },
366 };
367
368 static const struct regmap_config lp8860_eeprom_regmap_config = {
369 .reg_bits = 8,
370 .val_bits = 8,
371
372 .max_register = LP8860_EEPROM_REG_24,
373 .reg_defaults = lp8860_eeprom_defs,
374 .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
375 .cache_type = REGCACHE_NONE,
376 };
377
lp8860_probe(struct i2c_client * client,const struct i2c_device_id * id)378 static int lp8860_probe(struct i2c_client *client,
379 const struct i2c_device_id *id)
380 {
381 int ret;
382 struct lp8860_led *led;
383 struct device_node *np = client->dev.of_node;
384 struct device_node *child_node;
385 struct led_init_data init_data = {};
386
387 led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
388 if (!led)
389 return -ENOMEM;
390
391 child_node = of_get_next_available_child(np, NULL);
392 if (!child_node)
393 return -EINVAL;
394
395 led->led_dev.default_trigger = of_get_property(child_node,
396 "linux,default-trigger",
397 NULL);
398
399 led->enable_gpio = devm_gpiod_get_optional(&client->dev,
400 "enable", GPIOD_OUT_LOW);
401 if (IS_ERR(led->enable_gpio)) {
402 ret = PTR_ERR(led->enable_gpio);
403 dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
404 return ret;
405 }
406
407 led->regulator = devm_regulator_get(&client->dev, "vled");
408 if (IS_ERR(led->regulator))
409 led->regulator = NULL;
410
411 led->client = client;
412 led->led_dev.brightness_set_blocking = lp8860_brightness_set;
413
414 mutex_init(&led->lock);
415
416 i2c_set_clientdata(client, led);
417
418 led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
419 if (IS_ERR(led->regmap)) {
420 ret = PTR_ERR(led->regmap);
421 dev_err(&client->dev, "Failed to allocate register map: %d\n",
422 ret);
423 return ret;
424 }
425
426 led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
427 if (IS_ERR(led->eeprom_regmap)) {
428 ret = PTR_ERR(led->eeprom_regmap);
429 dev_err(&client->dev, "Failed to allocate register map: %d\n",
430 ret);
431 return ret;
432 }
433
434 ret = lp8860_init(led);
435 if (ret)
436 return ret;
437
438 init_data.fwnode = of_fwnode_handle(child_node);
439 init_data.devicename = LP8860_NAME;
440 init_data.default_label = ":display_cluster";
441
442 ret = devm_led_classdev_register_ext(&client->dev, &led->led_dev,
443 &init_data);
444 if (ret) {
445 dev_err(&client->dev, "led register err: %d\n", ret);
446 return ret;
447 }
448
449 return 0;
450 }
451
lp8860_remove(struct i2c_client * client)452 static int lp8860_remove(struct i2c_client *client)
453 {
454 struct lp8860_led *led = i2c_get_clientdata(client);
455 int ret;
456
457 if (led->enable_gpio)
458 gpiod_direction_output(led->enable_gpio, 0);
459
460 if (led->regulator) {
461 ret = regulator_disable(led->regulator);
462 if (ret)
463 dev_err(&led->client->dev,
464 "Failed to disable regulator\n");
465 }
466
467 mutex_destroy(&led->lock);
468
469 return 0;
470 }
471
472 static const struct i2c_device_id lp8860_id[] = {
473 { "lp8860", 0 },
474 { }
475 };
476 MODULE_DEVICE_TABLE(i2c, lp8860_id);
477
478 static const struct of_device_id of_lp8860_leds_match[] = {
479 { .compatible = "ti,lp8860", },
480 {},
481 };
482 MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
483
484 static struct i2c_driver lp8860_driver = {
485 .driver = {
486 .name = "lp8860",
487 .of_match_table = of_lp8860_leds_match,
488 },
489 .probe = lp8860_probe,
490 .remove = lp8860_remove,
491 .id_table = lp8860_id,
492 };
493 module_i2c_driver(lp8860_driver);
494
495 MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
496 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
497 MODULE_LICENSE("GPL v2");
498