• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  htc-i2cpld.c
4  *  Chip driver for an unknown CPLD chip found on omap850 HTC devices like
5  *  the HTC Wizard and HTC Herald.
6  *  The cpld is located on the i2c bus and acts as an input/output GPIO
7  *  extender.
8  *
9  *  Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
10  *
11  *  Based on work done in the linwizard project
12  *  Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
13  */
14 
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/interrupt.h>
18 #include <linux/platform_device.h>
19 #include <linux/i2c.h>
20 #include <linux/irq.h>
21 #include <linux/spinlock.h>
22 #include <linux/htcpld.h>
23 #include <linux/gpio.h>
24 #include <linux/slab.h>
25 
26 struct htcpld_chip {
27 	spinlock_t              lock;
28 
29 	/* chip info */
30 	u8                      reset;
31 	u8                      addr;
32 	struct device           *dev;
33 	struct i2c_client	*client;
34 
35 	/* Output details */
36 	u8                      cache_out;
37 	struct gpio_chip        chip_out;
38 
39 	/* Input details */
40 	u8                      cache_in;
41 	struct gpio_chip        chip_in;
42 
43 	u16                     irqs_enabled;
44 	uint                    irq_start;
45 	int                     nirqs;
46 
47 	unsigned int		flow_type;
48 	/*
49 	 * Work structure to allow for setting values outside of any
50 	 * possible interrupt context
51 	 */
52 	struct work_struct set_val_work;
53 };
54 
55 struct htcpld_data {
56 	/* irq info */
57 	u16                irqs_enabled;
58 	uint               irq_start;
59 	int                nirqs;
60 	uint               chained_irq;
61 	unsigned int       int_reset_gpio_hi;
62 	unsigned int       int_reset_gpio_lo;
63 
64 	/* htcpld info */
65 	struct htcpld_chip *chip;
66 	unsigned int       nchips;
67 };
68 
69 /* There does not appear to be a way to proactively mask interrupts
70  * on the htcpld chip itself.  So, we simply ignore interrupts that
71  * aren't desired. */
htcpld_mask(struct irq_data * data)72 static void htcpld_mask(struct irq_data *data)
73 {
74 	struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
75 	chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start));
76 	pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled);
77 }
htcpld_unmask(struct irq_data * data)78 static void htcpld_unmask(struct irq_data *data)
79 {
80 	struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
81 	chip->irqs_enabled |= 1 << (data->irq - chip->irq_start);
82 	pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled);
83 }
84 
htcpld_set_type(struct irq_data * data,unsigned int flags)85 static int htcpld_set_type(struct irq_data *data, unsigned int flags)
86 {
87 	struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
88 
89 	if (flags & ~IRQ_TYPE_SENSE_MASK)
90 		return -EINVAL;
91 
92 	/* We only allow edge triggering */
93 	if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
94 		return -EINVAL;
95 
96 	chip->flow_type = flags;
97 	return 0;
98 }
99 
100 static struct irq_chip htcpld_muxed_chip = {
101 	.name         = "htcpld",
102 	.irq_mask     = htcpld_mask,
103 	.irq_unmask   = htcpld_unmask,
104 	.irq_set_type = htcpld_set_type,
105 };
106 
107 /* To properly dispatch IRQ events, we need to read from the
108  * chip.  This is an I2C action that could possibly sleep
109  * (which is bad in interrupt context) -- so we use a threaded
110  * interrupt handler to get around that.
111  */
htcpld_handler(int irq,void * dev)112 static irqreturn_t htcpld_handler(int irq, void *dev)
113 {
114 	struct htcpld_data *htcpld = dev;
115 	unsigned int i;
116 	unsigned long flags;
117 	int irqpin;
118 
119 	if (!htcpld) {
120 		pr_debug("htcpld is null in ISR\n");
121 		return IRQ_HANDLED;
122 	}
123 
124 	/*
125 	 * For each chip, do a read of the chip and trigger any interrupts
126 	 * desired.  The interrupts will be triggered from LSB to MSB (i.e.
127 	 * bit 0 first, then bit 1, etc.)
128 	 *
129 	 * For chips that have no interrupt range specified, just skip 'em.
130 	 */
131 	for (i = 0; i < htcpld->nchips; i++) {
132 		struct htcpld_chip *chip = &htcpld->chip[i];
133 		struct i2c_client *client;
134 		int val;
135 		unsigned long uval, old_val;
136 
137 		if (!chip) {
138 			pr_debug("chip %d is null in ISR\n", i);
139 			continue;
140 		}
141 
142 		if (chip->nirqs == 0)
143 			continue;
144 
145 		client = chip->client;
146 		if (!client) {
147 			pr_debug("client %d is null in ISR\n", i);
148 			continue;
149 		}
150 
151 		/* Scan the chip */
152 		val = i2c_smbus_read_byte_data(client, chip->cache_out);
153 		if (val < 0) {
154 			/* Throw a warning and skip this chip */
155 			dev_warn(chip->dev, "Unable to read from chip: %d\n",
156 				 val);
157 			continue;
158 		}
159 
160 		uval = (unsigned long)val;
161 
162 		spin_lock_irqsave(&chip->lock, flags);
163 
164 		/* Save away the old value so we can compare it */
165 		old_val = chip->cache_in;
166 
167 		/* Write the new value */
168 		chip->cache_in = uval;
169 
170 		spin_unlock_irqrestore(&chip->lock, flags);
171 
172 		/*
173 		 * For each bit in the data (starting at bit 0), trigger
174 		 * associated interrupts.
175 		 */
176 		for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
177 			unsigned oldb, newb, type = chip->flow_type;
178 
179 			irq = chip->irq_start + irqpin;
180 
181 			/* Run the IRQ handler, but only if the bit value
182 			 * changed, and the proper flags are set */
183 			oldb = (old_val >> irqpin) & 1;
184 			newb = (uval >> irqpin) & 1;
185 
186 			if ((!oldb && newb && (type & IRQ_TYPE_EDGE_RISING)) ||
187 			    (oldb && !newb && (type & IRQ_TYPE_EDGE_FALLING))) {
188 				pr_debug("fire IRQ %d\n", irqpin);
189 				generic_handle_irq(irq);
190 			}
191 		}
192 	}
193 
194 	/*
195 	 * In order to continue receiving interrupts, the int_reset_gpio must
196 	 * be asserted.
197 	 */
198 	if (htcpld->int_reset_gpio_hi)
199 		gpio_set_value(htcpld->int_reset_gpio_hi, 1);
200 	if (htcpld->int_reset_gpio_lo)
201 		gpio_set_value(htcpld->int_reset_gpio_lo, 0);
202 
203 	return IRQ_HANDLED;
204 }
205 
206 /*
207  * The GPIO set routines can be called from interrupt context, especially if,
208  * for example they're attached to the led-gpio framework and a trigger is
209  * enabled.  As such, we declared work above in the htcpld_chip structure,
210  * and that work is scheduled in the set routine.  The kernel can then run
211  * the I2C functions, which will sleep, in process context.
212  */
htcpld_chip_set(struct gpio_chip * chip,unsigned offset,int val)213 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
214 {
215 	struct i2c_client *client;
216 	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
217 	unsigned long flags;
218 
219 	client = chip_data->client;
220 	if (!client)
221 		return;
222 
223 	spin_lock_irqsave(&chip_data->lock, flags);
224 	if (val)
225 		chip_data->cache_out |= (1 << offset);
226 	else
227 		chip_data->cache_out &= ~(1 << offset);
228 	spin_unlock_irqrestore(&chip_data->lock, flags);
229 
230 	schedule_work(&(chip_data->set_val_work));
231 }
232 
htcpld_chip_set_ni(struct work_struct * work)233 static void htcpld_chip_set_ni(struct work_struct *work)
234 {
235 	struct htcpld_chip *chip_data;
236 	struct i2c_client *client;
237 
238 	chip_data = container_of(work, struct htcpld_chip, set_val_work);
239 	client = chip_data->client;
240 	i2c_smbus_read_byte_data(client, chip_data->cache_out);
241 }
242 
htcpld_chip_get(struct gpio_chip * chip,unsigned offset)243 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
244 {
245 	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
246 	u8 cache;
247 
248 	if (!strncmp(chip->label, "htcpld-out", 10)) {
249 		cache = chip_data->cache_out;
250 	} else if (!strncmp(chip->label, "htcpld-in", 9)) {
251 		cache = chip_data->cache_in;
252 	} else
253 		return -EINVAL;
254 
255 	return (cache >> offset) & 1;
256 }
257 
htcpld_direction_output(struct gpio_chip * chip,unsigned offset,int value)258 static int htcpld_direction_output(struct gpio_chip *chip,
259 					unsigned offset, int value)
260 {
261 	htcpld_chip_set(chip, offset, value);
262 	return 0;
263 }
264 
htcpld_direction_input(struct gpio_chip * chip,unsigned offset)265 static int htcpld_direction_input(struct gpio_chip *chip,
266 					unsigned offset)
267 {
268 	/*
269 	 * No-op: this function can only be called on the input chip.
270 	 * We do however make sure the offset is within range.
271 	 */
272 	return (offset < chip->ngpio) ? 0 : -EINVAL;
273 }
274 
htcpld_chip_to_irq(struct gpio_chip * chip,unsigned offset)275 static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
276 {
277 	struct htcpld_chip *chip_data = gpiochip_get_data(chip);
278 
279 	if (offset < chip_data->nirqs)
280 		return chip_data->irq_start + offset;
281 	else
282 		return -EINVAL;
283 }
284 
htcpld_chip_reset(struct i2c_client * client)285 static void htcpld_chip_reset(struct i2c_client *client)
286 {
287 	struct htcpld_chip *chip_data = i2c_get_clientdata(client);
288 	if (!chip_data)
289 		return;
290 
291 	i2c_smbus_read_byte_data(
292 		client, (chip_data->cache_out = chip_data->reset));
293 }
294 
htcpld_setup_chip_irq(struct platform_device * pdev,int chip_index)295 static int htcpld_setup_chip_irq(
296 		struct platform_device *pdev,
297 		int chip_index)
298 {
299 	struct htcpld_data *htcpld;
300 	struct htcpld_chip *chip;
301 	unsigned int irq, irq_end;
302 
303 	/* Get the platform and driver data */
304 	htcpld = platform_get_drvdata(pdev);
305 	chip = &htcpld->chip[chip_index];
306 
307 	/* Setup irq handlers */
308 	irq_end = chip->irq_start + chip->nirqs;
309 	for (irq = chip->irq_start; irq < irq_end; irq++) {
310 		irq_set_chip_and_handler(irq, &htcpld_muxed_chip,
311 					 handle_simple_irq);
312 		irq_set_chip_data(irq, chip);
313 		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
314 	}
315 
316 	return 0;
317 }
318 
htcpld_register_chip_i2c(struct platform_device * pdev,int chip_index)319 static int htcpld_register_chip_i2c(
320 		struct platform_device *pdev,
321 		int chip_index)
322 {
323 	struct htcpld_data *htcpld;
324 	struct device *dev = &pdev->dev;
325 	struct htcpld_core_platform_data *pdata;
326 	struct htcpld_chip *chip;
327 	struct htcpld_chip_platform_data *plat_chip_data;
328 	struct i2c_adapter *adapter;
329 	struct i2c_client *client;
330 	struct i2c_board_info info;
331 
332 	/* Get the platform and driver data */
333 	pdata = dev_get_platdata(dev);
334 	htcpld = platform_get_drvdata(pdev);
335 	chip = &htcpld->chip[chip_index];
336 	plat_chip_data = &pdata->chip[chip_index];
337 
338 	adapter = i2c_get_adapter(pdata->i2c_adapter_id);
339 	if (!adapter) {
340 		/* Eek, no such I2C adapter!  Bail out. */
341 		dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
342 			 plat_chip_data->addr, pdata->i2c_adapter_id);
343 		return -ENODEV;
344 	}
345 
346 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
347 		dev_warn(dev, "i2c adapter %d non-functional\n",
348 			 pdata->i2c_adapter_id);
349 		return -EINVAL;
350 	}
351 
352 	memset(&info, 0, sizeof(struct i2c_board_info));
353 	info.addr = plat_chip_data->addr;
354 	strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
355 	info.platform_data = chip;
356 
357 	/* Add the I2C device.  This calls the probe() function. */
358 	client = i2c_new_device(adapter, &info);
359 	if (!client) {
360 		/* I2C device registration failed, contineu with the next */
361 		dev_warn(dev, "Unable to add I2C device for 0x%x\n",
362 			 plat_chip_data->addr);
363 		return -ENODEV;
364 	}
365 
366 	i2c_set_clientdata(client, chip);
367 	snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
368 	chip->client = client;
369 
370 	/* Reset the chip */
371 	htcpld_chip_reset(client);
372 	chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
373 
374 	return 0;
375 }
376 
htcpld_unregister_chip_i2c(struct platform_device * pdev,int chip_index)377 static void htcpld_unregister_chip_i2c(
378 		struct platform_device *pdev,
379 		int chip_index)
380 {
381 	struct htcpld_data *htcpld;
382 	struct htcpld_chip *chip;
383 
384 	/* Get the platform and driver data */
385 	htcpld = platform_get_drvdata(pdev);
386 	chip = &htcpld->chip[chip_index];
387 
388 	i2c_unregister_device(chip->client);
389 }
390 
htcpld_register_chip_gpio(struct platform_device * pdev,int chip_index)391 static int htcpld_register_chip_gpio(
392 		struct platform_device *pdev,
393 		int chip_index)
394 {
395 	struct htcpld_data *htcpld;
396 	struct device *dev = &pdev->dev;
397 	struct htcpld_core_platform_data *pdata;
398 	struct htcpld_chip *chip;
399 	struct htcpld_chip_platform_data *plat_chip_data;
400 	struct gpio_chip *gpio_chip;
401 	int ret = 0;
402 
403 	/* Get the platform and driver data */
404 	pdata = dev_get_platdata(dev);
405 	htcpld = platform_get_drvdata(pdev);
406 	chip = &htcpld->chip[chip_index];
407 	plat_chip_data = &pdata->chip[chip_index];
408 
409 	/* Setup the GPIO chips */
410 	gpio_chip = &(chip->chip_out);
411 	gpio_chip->label           = "htcpld-out";
412 	gpio_chip->parent             = dev;
413 	gpio_chip->owner           = THIS_MODULE;
414 	gpio_chip->get             = htcpld_chip_get;
415 	gpio_chip->set             = htcpld_chip_set;
416 	gpio_chip->direction_input = NULL;
417 	gpio_chip->direction_output = htcpld_direction_output;
418 	gpio_chip->base            = plat_chip_data->gpio_out_base;
419 	gpio_chip->ngpio           = plat_chip_data->num_gpios;
420 
421 	gpio_chip = &(chip->chip_in);
422 	gpio_chip->label           = "htcpld-in";
423 	gpio_chip->parent             = dev;
424 	gpio_chip->owner           = THIS_MODULE;
425 	gpio_chip->get             = htcpld_chip_get;
426 	gpio_chip->set             = NULL;
427 	gpio_chip->direction_input = htcpld_direction_input;
428 	gpio_chip->direction_output = NULL;
429 	gpio_chip->to_irq          = htcpld_chip_to_irq;
430 	gpio_chip->base            = plat_chip_data->gpio_in_base;
431 	gpio_chip->ngpio           = plat_chip_data->num_gpios;
432 
433 	/* Add the GPIO chips */
434 	ret = gpiochip_add_data(&(chip->chip_out), chip);
435 	if (ret) {
436 		dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
437 			 plat_chip_data->addr, ret);
438 		return ret;
439 	}
440 
441 	ret = gpiochip_add_data(&(chip->chip_in), chip);
442 	if (ret) {
443 		dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
444 			 plat_chip_data->addr, ret);
445 		gpiochip_remove(&(chip->chip_out));
446 		return ret;
447 	}
448 
449 	return 0;
450 }
451 
htcpld_setup_chips(struct platform_device * pdev)452 static int htcpld_setup_chips(struct platform_device *pdev)
453 {
454 	struct htcpld_data *htcpld;
455 	struct device *dev = &pdev->dev;
456 	struct htcpld_core_platform_data *pdata;
457 	int i;
458 
459 	/* Get the platform and driver data */
460 	pdata = dev_get_platdata(dev);
461 	htcpld = platform_get_drvdata(pdev);
462 
463 	/* Setup each chip's output GPIOs */
464 	htcpld->nchips = pdata->num_chip;
465 	htcpld->chip = devm_kcalloc(dev,
466 				    htcpld->nchips,
467 				    sizeof(struct htcpld_chip),
468 				    GFP_KERNEL);
469 	if (!htcpld->chip)
470 		return -ENOMEM;
471 
472 	/* Add the chips as best we can */
473 	for (i = 0; i < htcpld->nchips; i++) {
474 		int ret;
475 
476 		/* Setup the HTCPLD chips */
477 		htcpld->chip[i].reset = pdata->chip[i].reset;
478 		htcpld->chip[i].cache_out = pdata->chip[i].reset;
479 		htcpld->chip[i].cache_in = 0;
480 		htcpld->chip[i].dev = dev;
481 		htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
482 		htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
483 
484 		INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
485 		spin_lock_init(&(htcpld->chip[i].lock));
486 
487 		/* Setup the interrupts for the chip */
488 		if (htcpld->chained_irq) {
489 			ret = htcpld_setup_chip_irq(pdev, i);
490 			if (ret)
491 				continue;
492 		}
493 
494 		/* Register the chip with I2C */
495 		ret = htcpld_register_chip_i2c(pdev, i);
496 		if (ret)
497 			continue;
498 
499 
500 		/* Register the chips with the GPIO subsystem */
501 		ret = htcpld_register_chip_gpio(pdev, i);
502 		if (ret) {
503 			/* Unregister the chip from i2c and continue */
504 			htcpld_unregister_chip_i2c(pdev, i);
505 			continue;
506 		}
507 
508 		dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
509 	}
510 
511 	return 0;
512 }
513 
htcpld_core_probe(struct platform_device * pdev)514 static int htcpld_core_probe(struct platform_device *pdev)
515 {
516 	struct htcpld_data *htcpld;
517 	struct device *dev = &pdev->dev;
518 	struct htcpld_core_platform_data *pdata;
519 	struct resource *res;
520 	int ret = 0;
521 
522 	if (!dev)
523 		return -ENODEV;
524 
525 	pdata = dev_get_platdata(dev);
526 	if (!pdata) {
527 		dev_warn(dev, "Platform data not found for htcpld core!\n");
528 		return -ENXIO;
529 	}
530 
531 	htcpld = devm_kzalloc(dev, sizeof(struct htcpld_data), GFP_KERNEL);
532 	if (!htcpld)
533 		return -ENOMEM;
534 
535 	/* Find chained irq */
536 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
537 	if (res) {
538 		int flags;
539 		htcpld->chained_irq = res->start;
540 
541 		/* Setup the chained interrupt handler */
542 		flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
543 			IRQF_ONESHOT;
544 		ret = request_threaded_irq(htcpld->chained_irq,
545 					   NULL, htcpld_handler,
546 					   flags, pdev->name, htcpld);
547 		if (ret) {
548 			dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
549 			return ret;
550 		} else
551 			device_init_wakeup(dev, 0);
552 	}
553 
554 	/* Set the driver data */
555 	platform_set_drvdata(pdev, htcpld);
556 
557 	/* Setup the htcpld chips */
558 	ret = htcpld_setup_chips(pdev);
559 	if (ret)
560 		return ret;
561 
562 	/* Request the GPIO(s) for the int reset and set them up */
563 	if (pdata->int_reset_gpio_hi) {
564 		ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
565 		if (ret) {
566 			/*
567 			 * If it failed, that sucks, but we can probably
568 			 * continue on without it.
569 			 */
570 			dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
571 			htcpld->int_reset_gpio_hi = 0;
572 		} else {
573 			htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
574 			gpio_set_value(htcpld->int_reset_gpio_hi, 1);
575 		}
576 	}
577 
578 	if (pdata->int_reset_gpio_lo) {
579 		ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
580 		if (ret) {
581 			/*
582 			 * If it failed, that sucks, but we can probably
583 			 * continue on without it.
584 			 */
585 			dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
586 			htcpld->int_reset_gpio_lo = 0;
587 		} else {
588 			htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
589 			gpio_set_value(htcpld->int_reset_gpio_lo, 0);
590 		}
591 	}
592 
593 	dev_info(dev, "Initialized successfully\n");
594 	return 0;
595 }
596 
597 /* The I2C Driver -- used internally */
598 static const struct i2c_device_id htcpld_chip_id[] = {
599 	{ "htcpld-chip", 0 },
600 	{ }
601 };
602 
603 static struct i2c_driver htcpld_chip_driver = {
604 	.driver = {
605 		.name	= "htcpld-chip",
606 	},
607 	.id_table = htcpld_chip_id,
608 };
609 
610 /* The Core Driver */
611 static struct platform_driver htcpld_core_driver = {
612 	.driver = {
613 		.name = "i2c-htcpld",
614 	},
615 };
616 
htcpld_core_init(void)617 static int __init htcpld_core_init(void)
618 {
619 	int ret;
620 
621 	/* Register the I2C Chip driver */
622 	ret = i2c_add_driver(&htcpld_chip_driver);
623 	if (ret)
624 		return ret;
625 
626 	/* Probe for our chips */
627 	return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
628 }
629 device_initcall(htcpld_core_init);
630