1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2010 Marvell International Ltd.
4 * Zhangfei Gao <zhangfei.gao@marvell.com>
5 * Kevin Wang <dwang4@marvell.com>
6 * Mingwei Wang <mwwang@marvell.com>
7 * Philip Rakity <prakity@marvell.com>
8 * Mark Brown <markb@marvell.com>
9 */
10 #include <linux/err.h>
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/clk.h>
14 #include <linux/io.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/host.h>
17 #include <linux/platform_data/pxa_sdhci.h>
18 #include <linux/slab.h>
19 #include <linux/delay.h>
20 #include <linux/module.h>
21 #include <linux/of.h>
22 #include <linux/of_device.h>
23 #include <linux/pm.h>
24 #include <linux/pm_runtime.h>
25 #include <linux/mbus.h>
26
27 #include "sdhci.h"
28 #include "sdhci-pltfm.h"
29
30 #define PXAV3_RPM_DELAY_MS 50
31
32 #define SD_CLOCK_BURST_SIZE_SETUP 0x10A
33 #define SDCLK_SEL 0x100
34 #define SDCLK_DELAY_SHIFT 9
35 #define SDCLK_DELAY_MASK 0x1f
36
37 #define SD_CFG_FIFO_PARAM 0x100
38 #define SDCFG_GEN_PAD_CLK_ON (1<<6)
39 #define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
40 #define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
41
42 #define SD_SPI_MODE 0x108
43 #define SD_CE_ATA_1 0x10C
44
45 #define SD_CE_ATA_2 0x10E
46 #define SDCE_MISC_INT (1<<2)
47 #define SDCE_MISC_INT_EN (1<<1)
48
49 struct sdhci_pxa {
50 struct clk *clk_core;
51 struct clk *clk_io;
52 u8 power_mode;
53 void __iomem *sdio3_conf_reg;
54 };
55
56 /*
57 * These registers are relative to the second register region, for the
58 * MBus bridge.
59 */
60 #define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3))
61 #define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3))
62 #define SDHCI_MAX_WIN_NUM 8
63
64 /*
65 * Fields below belong to SDIO3 Configuration Register (third register
66 * region for the Armada 38x flavor)
67 */
68
69 #define SDIO3_CONF_CLK_INV BIT(0)
70 #define SDIO3_CONF_SD_FB_CLK BIT(2)
71
mv_conf_mbus_windows(struct platform_device * pdev,const struct mbus_dram_target_info * dram)72 static int mv_conf_mbus_windows(struct platform_device *pdev,
73 const struct mbus_dram_target_info *dram)
74 {
75 int i;
76 void __iomem *regs;
77 struct resource *res;
78
79 if (!dram) {
80 dev_err(&pdev->dev, "no mbus dram info\n");
81 return -EINVAL;
82 }
83
84 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
85 if (!res) {
86 dev_err(&pdev->dev, "cannot get mbus registers\n");
87 return -EINVAL;
88 }
89
90 regs = ioremap(res->start, resource_size(res));
91 if (!regs) {
92 dev_err(&pdev->dev, "cannot map mbus registers\n");
93 return -ENOMEM;
94 }
95
96 for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
97 writel(0, regs + SDHCI_WINDOW_CTRL(i));
98 writel(0, regs + SDHCI_WINDOW_BASE(i));
99 }
100
101 for (i = 0; i < dram->num_cs; i++) {
102 const struct mbus_dram_window *cs = dram->cs + i;
103
104 /* Write size, attributes and target id to control register */
105 writel(((cs->size - 1) & 0xffff0000) |
106 (cs->mbus_attr << 8) |
107 (dram->mbus_dram_target_id << 4) | 1,
108 regs + SDHCI_WINDOW_CTRL(i));
109 /* Write base address to base register */
110 writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
111 }
112
113 iounmap(regs);
114
115 return 0;
116 }
117
armada_38x_quirks(struct platform_device * pdev,struct sdhci_host * host)118 static int armada_38x_quirks(struct platform_device *pdev,
119 struct sdhci_host *host)
120 {
121 struct device_node *np = pdev->dev.of_node;
122 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
123 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
124 struct resource *res;
125
126 host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
127 host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
128
129 host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
130 host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
131
132 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
133 "conf-sdio3");
134 if (res) {
135 pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res);
136 if (IS_ERR(pxa->sdio3_conf_reg))
137 return PTR_ERR(pxa->sdio3_conf_reg);
138 } else {
139 /*
140 * According to erratum 'FE-2946959' both SDR50 and DDR50
141 * modes require specific clock adjustments in SDIO3
142 * Configuration register, if the adjustment is not done,
143 * remove them from the capabilities.
144 */
145 host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50);
146
147 dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n");
148 }
149
150 /*
151 * According to erratum 'ERR-7878951' Armada 38x SDHCI
152 * controller has different capabilities than the ones shown
153 * in its registers
154 */
155 if (of_property_read_bool(np, "no-1-8-v")) {
156 host->caps &= ~SDHCI_CAN_VDD_180;
157 host->mmc->caps &= ~MMC_CAP_1_8V_DDR;
158 } else {
159 host->caps &= ~SDHCI_CAN_VDD_330;
160 }
161 host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING);
162
163 return 0;
164 }
165
pxav3_reset(struct sdhci_host * host,u8 mask)166 static void pxav3_reset(struct sdhci_host *host, u8 mask)
167 {
168 struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
169 struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
170
171 sdhci_reset(host, mask);
172
173 if (mask == SDHCI_RESET_ALL) {
174 /*
175 * tune timing of read data/command when crc error happen
176 * no performance impact
177 */
178 if (pdata && 0 != pdata->clk_delay_cycles) {
179 u16 tmp;
180
181 tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
182 tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
183 << SDCLK_DELAY_SHIFT;
184 tmp |= SDCLK_SEL;
185 writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
186 }
187 }
188 }
189
190 #define MAX_WAIT_COUNT 5
pxav3_gen_init_74_clocks(struct sdhci_host * host,u8 power_mode)191 static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
192 {
193 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
194 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
195 u16 tmp;
196 int count;
197
198 if (pxa->power_mode == MMC_POWER_UP
199 && power_mode == MMC_POWER_ON) {
200
201 dev_dbg(mmc_dev(host->mmc),
202 "%s: slot->power_mode = %d,"
203 "ios->power_mode = %d\n",
204 __func__,
205 pxa->power_mode,
206 power_mode);
207
208 /* set we want notice of when 74 clocks are sent */
209 tmp = readw(host->ioaddr + SD_CE_ATA_2);
210 tmp |= SDCE_MISC_INT_EN;
211 writew(tmp, host->ioaddr + SD_CE_ATA_2);
212
213 /* start sending the 74 clocks */
214 tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
215 tmp |= SDCFG_GEN_PAD_CLK_ON;
216 writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
217
218 /* slowest speed is about 100KHz or 10usec per clock */
219 udelay(740);
220 count = 0;
221
222 while (count++ < MAX_WAIT_COUNT) {
223 if ((readw(host->ioaddr + SD_CE_ATA_2)
224 & SDCE_MISC_INT) == 0)
225 break;
226 udelay(10);
227 }
228
229 if (count == MAX_WAIT_COUNT)
230 dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
231
232 /* clear the interrupt bit if posted */
233 tmp = readw(host->ioaddr + SD_CE_ATA_2);
234 tmp |= SDCE_MISC_INT;
235 writew(tmp, host->ioaddr + SD_CE_ATA_2);
236 }
237 pxa->power_mode = power_mode;
238 }
239
pxav3_set_uhs_signaling(struct sdhci_host * host,unsigned int uhs)240 static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
241 {
242 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
243 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
244 u16 ctrl_2;
245
246 /*
247 * Set V18_EN -- UHS modes do not work without this.
248 * does not change signaling voltage
249 */
250 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
251
252 /* Select Bus Speed Mode for host */
253 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
254 switch (uhs) {
255 case MMC_TIMING_UHS_SDR12:
256 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
257 break;
258 case MMC_TIMING_UHS_SDR25:
259 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
260 break;
261 case MMC_TIMING_UHS_SDR50:
262 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
263 break;
264 case MMC_TIMING_UHS_SDR104:
265 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
266 break;
267 case MMC_TIMING_MMC_DDR52:
268 case MMC_TIMING_UHS_DDR50:
269 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
270 break;
271 }
272
273 /*
274 * Update SDIO3 Configuration register according to erratum
275 * FE-2946959
276 */
277 if (pxa->sdio3_conf_reg) {
278 u8 reg_val = readb(pxa->sdio3_conf_reg);
279
280 if (uhs == MMC_TIMING_UHS_SDR50 ||
281 uhs == MMC_TIMING_UHS_DDR50) {
282 reg_val &= ~SDIO3_CONF_CLK_INV;
283 reg_val |= SDIO3_CONF_SD_FB_CLK;
284 } else if (uhs == MMC_TIMING_MMC_HS) {
285 reg_val &= ~SDIO3_CONF_CLK_INV;
286 reg_val &= ~SDIO3_CONF_SD_FB_CLK;
287 } else {
288 reg_val |= SDIO3_CONF_CLK_INV;
289 reg_val &= ~SDIO3_CONF_SD_FB_CLK;
290 }
291 writeb(reg_val, pxa->sdio3_conf_reg);
292 }
293
294 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
295 dev_dbg(mmc_dev(host->mmc),
296 "%s uhs = %d, ctrl_2 = %04X\n",
297 __func__, uhs, ctrl_2);
298 }
299
pxav3_set_power(struct sdhci_host * host,unsigned char mode,unsigned short vdd)300 static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
301 unsigned short vdd)
302 {
303 struct mmc_host *mmc = host->mmc;
304 u8 pwr = host->pwr;
305
306 sdhci_set_power_noreg(host, mode, vdd);
307
308 if (host->pwr == pwr)
309 return;
310
311 if (host->pwr == 0)
312 vdd = 0;
313
314 if (!IS_ERR(mmc->supply.vmmc))
315 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
316 }
317
318 static const struct sdhci_ops pxav3_sdhci_ops = {
319 .set_clock = sdhci_set_clock,
320 .set_power = pxav3_set_power,
321 .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
322 .get_max_clock = sdhci_pltfm_clk_get_max_clock,
323 .set_bus_width = sdhci_set_bus_width,
324 .reset = pxav3_reset,
325 .set_uhs_signaling = pxav3_set_uhs_signaling,
326 };
327
328 static const struct sdhci_pltfm_data sdhci_pxav3_pdata = {
329 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
330 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
331 | SDHCI_QUIRK_32BIT_ADMA_SIZE
332 | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
333 .ops = &pxav3_sdhci_ops,
334 };
335
336 #ifdef CONFIG_OF
337 static const struct of_device_id sdhci_pxav3_of_match[] = {
338 {
339 .compatible = "mrvl,pxav3-mmc",
340 },
341 {
342 .compatible = "marvell,armada-380-sdhci",
343 },
344 {},
345 };
346 MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
347
pxav3_get_mmc_pdata(struct device * dev)348 static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
349 {
350 struct sdhci_pxa_platdata *pdata;
351 struct device_node *np = dev->of_node;
352 u32 clk_delay_cycles;
353
354 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
355 if (!pdata)
356 return NULL;
357
358 if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
359 &clk_delay_cycles))
360 pdata->clk_delay_cycles = clk_delay_cycles;
361
362 return pdata;
363 }
364 #else
pxav3_get_mmc_pdata(struct device * dev)365 static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
366 {
367 return NULL;
368 }
369 #endif
370
sdhci_pxav3_probe(struct platform_device * pdev)371 static int sdhci_pxav3_probe(struct platform_device *pdev)
372 {
373 struct sdhci_pltfm_host *pltfm_host;
374 struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
375 struct device *dev = &pdev->dev;
376 struct device_node *np = pdev->dev.of_node;
377 struct sdhci_host *host = NULL;
378 struct sdhci_pxa *pxa = NULL;
379 const struct of_device_id *match;
380 int ret;
381
382 host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa));
383 if (IS_ERR(host))
384 return PTR_ERR(host);
385
386 pltfm_host = sdhci_priv(host);
387 pxa = sdhci_pltfm_priv(pltfm_host);
388
389 pxa->clk_io = devm_clk_get(dev, "io");
390 if (IS_ERR(pxa->clk_io))
391 pxa->clk_io = devm_clk_get(dev, NULL);
392 if (IS_ERR(pxa->clk_io)) {
393 dev_err(dev, "failed to get io clock\n");
394 ret = PTR_ERR(pxa->clk_io);
395 goto err_clk_get;
396 }
397 pltfm_host->clk = pxa->clk_io;
398 clk_prepare_enable(pxa->clk_io);
399
400 pxa->clk_core = devm_clk_get(dev, "core");
401 if (!IS_ERR(pxa->clk_core))
402 clk_prepare_enable(pxa->clk_core);
403
404 /* enable 1/8V DDR capable */
405 host->mmc->caps |= MMC_CAP_1_8V_DDR;
406
407 if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
408 ret = armada_38x_quirks(pdev, host);
409 if (ret < 0)
410 goto err_mbus_win;
411 ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
412 if (ret < 0)
413 goto err_mbus_win;
414 }
415
416 match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
417 if (match) {
418 ret = mmc_of_parse(host->mmc);
419 if (ret)
420 goto err_of_parse;
421 sdhci_get_of_property(pdev);
422 pdata = pxav3_get_mmc_pdata(dev);
423 pdev->dev.platform_data = pdata;
424 } else if (pdata) {
425 /* on-chip device */
426 if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
427 host->mmc->caps |= MMC_CAP_NONREMOVABLE;
428
429 /* If slot design supports 8 bit data, indicate this to MMC. */
430 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
431 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
432
433 if (pdata->quirks)
434 host->quirks |= pdata->quirks;
435 if (pdata->quirks2)
436 host->quirks2 |= pdata->quirks2;
437 if (pdata->host_caps)
438 host->mmc->caps |= pdata->host_caps;
439 if (pdata->host_caps2)
440 host->mmc->caps2 |= pdata->host_caps2;
441 if (pdata->pm_caps)
442 host->mmc->pm_caps |= pdata->pm_caps;
443 }
444
445 pm_runtime_get_noresume(&pdev->dev);
446 pm_runtime_set_active(&pdev->dev);
447 pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
448 pm_runtime_use_autosuspend(&pdev->dev);
449 pm_runtime_enable(&pdev->dev);
450 pm_suspend_ignore_children(&pdev->dev, 1);
451
452 ret = sdhci_add_host(host);
453 if (ret)
454 goto err_add_host;
455
456 if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ)
457 device_init_wakeup(&pdev->dev, 1);
458
459 pm_runtime_put_autosuspend(&pdev->dev);
460
461 return 0;
462
463 err_add_host:
464 pm_runtime_disable(&pdev->dev);
465 pm_runtime_put_noidle(&pdev->dev);
466 err_of_parse:
467 err_mbus_win:
468 clk_disable_unprepare(pxa->clk_io);
469 clk_disable_unprepare(pxa->clk_core);
470 err_clk_get:
471 sdhci_pltfm_free(pdev);
472 return ret;
473 }
474
sdhci_pxav3_remove(struct platform_device * pdev)475 static int sdhci_pxav3_remove(struct platform_device *pdev)
476 {
477 struct sdhci_host *host = platform_get_drvdata(pdev);
478 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
479 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
480
481 pm_runtime_get_sync(&pdev->dev);
482 pm_runtime_disable(&pdev->dev);
483 pm_runtime_put_noidle(&pdev->dev);
484
485 sdhci_remove_host(host, 1);
486
487 clk_disable_unprepare(pxa->clk_io);
488 clk_disable_unprepare(pxa->clk_core);
489
490 sdhci_pltfm_free(pdev);
491
492 return 0;
493 }
494
495 #ifdef CONFIG_PM_SLEEP
sdhci_pxav3_suspend(struct device * dev)496 static int sdhci_pxav3_suspend(struct device *dev)
497 {
498 int ret;
499 struct sdhci_host *host = dev_get_drvdata(dev);
500
501 pm_runtime_get_sync(dev);
502 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
503 mmc_retune_needed(host->mmc);
504 ret = sdhci_suspend_host(host);
505 pm_runtime_mark_last_busy(dev);
506 pm_runtime_put_autosuspend(dev);
507
508 return ret;
509 }
510
sdhci_pxav3_resume(struct device * dev)511 static int sdhci_pxav3_resume(struct device *dev)
512 {
513 int ret;
514 struct sdhci_host *host = dev_get_drvdata(dev);
515
516 pm_runtime_get_sync(dev);
517 ret = sdhci_resume_host(host);
518 pm_runtime_mark_last_busy(dev);
519 pm_runtime_put_autosuspend(dev);
520
521 return ret;
522 }
523 #endif
524
525 #ifdef CONFIG_PM
sdhci_pxav3_runtime_suspend(struct device * dev)526 static int sdhci_pxav3_runtime_suspend(struct device *dev)
527 {
528 struct sdhci_host *host = dev_get_drvdata(dev);
529 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
530 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
531 int ret;
532
533 ret = sdhci_runtime_suspend_host(host);
534 if (ret)
535 return ret;
536
537 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
538 mmc_retune_needed(host->mmc);
539
540 clk_disable_unprepare(pxa->clk_io);
541 if (!IS_ERR(pxa->clk_core))
542 clk_disable_unprepare(pxa->clk_core);
543
544 return 0;
545 }
546
sdhci_pxav3_runtime_resume(struct device * dev)547 static int sdhci_pxav3_runtime_resume(struct device *dev)
548 {
549 struct sdhci_host *host = dev_get_drvdata(dev);
550 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
551 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host);
552
553 clk_prepare_enable(pxa->clk_io);
554 if (!IS_ERR(pxa->clk_core))
555 clk_prepare_enable(pxa->clk_core);
556
557 return sdhci_runtime_resume_host(host, 0);
558 }
559 #endif
560
561 static const struct dev_pm_ops sdhci_pxav3_pmops = {
562 SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
563 SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
564 sdhci_pxav3_runtime_resume, NULL)
565 };
566
567 static struct platform_driver sdhci_pxav3_driver = {
568 .driver = {
569 .name = "sdhci-pxav3",
570 .of_match_table = of_match_ptr(sdhci_pxav3_of_match),
571 .pm = &sdhci_pxav3_pmops,
572 },
573 .probe = sdhci_pxav3_probe,
574 .remove = sdhci_pxav3_remove,
575 };
576
577 module_platform_driver(sdhci_pxav3_driver);
578
579 MODULE_DESCRIPTION("SDHCI driver for pxav3");
580 MODULE_AUTHOR("Marvell International Ltd.");
581 MODULE_LICENSE("GPL v2");
582
583