• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
3  *
4  * Written 1994-1999 by Avery Pennarun.
5  * Derived from skeleton.c by Donald Becker.
6  *
7  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8  *  for sponsoring the further development of this driver.
9  *
10  * **********************
11  *
12  * The original copyright of skeleton.c was as follows:
13  *
14  * skeleton.c Written 1993 by Donald Becker.
15  * Copyright 1993 United States Government as represented by the
16  * Director, National Security Agency.  This software may only be used
17  * and distributed according to the terms of the GNU General Public License as
18  * modified by SRC, incorporated herein by reference.
19  *
20  * **********************
21  *
22  * For more details, see drivers/net/arcnet.c
23  *
24  * **********************
25  */
26 
27 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
28 
29 #include <linux/module.h>
30 #include <linux/gfp.h>
31 #include <linux/init.h>
32 #include <linux/if_arp.h>
33 #include <net/arp.h>
34 #include <linux/netdevice.h>
35 #include <linux/skbuff.h>
36 #include "arcdevice.h"
37 
38 /* packet receiver */
rx(struct net_device * dev,int bufnum,struct archdr * pkthdr,int length)39 static void rx(struct net_device *dev, int bufnum,
40 	       struct archdr *pkthdr, int length)
41 {
42 	struct arcnet_local *lp = netdev_priv(dev);
43 	struct sk_buff *skb;
44 	struct archdr *pkt = pkthdr;
45 	int ofs;
46 
47 	arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
48 
49 	if (length > MTU)
50 		ofs = 512 - length;
51 	else
52 		ofs = 256 - length;
53 
54 	skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
55 	if (!skb) {
56 		dev->stats.rx_dropped++;
57 		return;
58 	}
59 	skb_put(skb, length + ARC_HDR_SIZE);
60 	skb->dev = dev;
61 
62 	pkt = (struct archdr *)skb->data;
63 
64 	skb_reset_mac_header(skb);
65 	skb_pull(skb, ARC_HDR_SIZE);
66 
67 	/* up to sizeof(pkt->soft) has already been copied from the card */
68 	memcpy(pkt, pkthdr, sizeof(struct archdr));
69 	if (length > sizeof(pkt->soft))
70 		lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
71 				      pkt->soft.raw + sizeof(pkt->soft),
72 				      length - sizeof(pkt->soft));
73 
74 	if (BUGLVL(D_SKB))
75 		arcnet_dump_skb(dev, skb, "rx");
76 
77 	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
78 	netif_rx(skb);
79 }
80 
81 /* Create the ARCnet hard/soft headers for raw mode.
82  * There aren't any soft headers in raw mode - not even the protocol id.
83  */
build_header(struct sk_buff * skb,struct net_device * dev,unsigned short type,uint8_t daddr)84 static int build_header(struct sk_buff *skb, struct net_device *dev,
85 			unsigned short type, uint8_t daddr)
86 {
87 	int hdr_size = ARC_HDR_SIZE;
88 	struct archdr *pkt = skb_push(skb, hdr_size);
89 
90 	/* Set the source hardware address.
91 	 *
92 	 * This is pretty pointless for most purposes, but it can help in
93 	 * debugging.  ARCnet does not allow us to change the source address
94 	 * in the actual packet sent.
95 	 */
96 	pkt->hard.source = *dev->dev_addr;
97 
98 	/* see linux/net/ethernet/eth.c to see where I got the following */
99 
100 	if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
101 		/* FIXME: fill in the last byte of the dest ipaddr here
102 		 * to better comply with RFC1051 in "noarp" mode.
103 		 */
104 		pkt->hard.dest = 0;
105 		return hdr_size;
106 	}
107 	/* otherwise, just fill it in and go! */
108 	pkt->hard.dest = daddr;
109 
110 	return hdr_size;	/* success */
111 }
112 
prepare_tx(struct net_device * dev,struct archdr * pkt,int length,int bufnum)113 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
114 		      int bufnum)
115 {
116 	struct arcnet_local *lp = netdev_priv(dev);
117 	struct arc_hardware *hard = &pkt->hard;
118 	int ofs;
119 
120 	arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
121 		   lp->next_tx, lp->cur_tx, bufnum);
122 
123 	/* hard header is not included in packet length */
124 	length -= ARC_HDR_SIZE;
125 
126 	if (length > XMTU) {
127 		/* should never happen! other people already check for this. */
128 		arc_printk(D_NORMAL, dev, "Bug!  prepare_tx with size %d (> %d)\n",
129 			   length, XMTU);
130 		length = XMTU;
131 	}
132 	if (length >= MinTU) {
133 		hard->offset[0] = 0;
134 		hard->offset[1] = ofs = 512 - length;
135 	} else if (length > MTU) {
136 		hard->offset[0] = 0;
137 		hard->offset[1] = ofs = 512 - length - 3;
138 	} else {
139 		hard->offset[0] = ofs = 256 - length;
140 	}
141 
142 	arc_printk(D_DURING, dev, "prepare_tx: length=%d ofs=%d\n",
143 		   length, ofs);
144 
145 	lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
146 	lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
147 
148 	lp->lastload_dest = hard->dest;
149 
150 	return 1;		/* done */
151 }
152 
153 static struct ArcProto rawmode_proto = {
154 	.suffix		= 'r',
155 	.mtu		= XMTU,
156 	.rx		= rx,
157 	.build_header	= build_header,
158 	.prepare_tx	= prepare_tx,
159 	.continue_tx    = NULL,
160 	.ack_tx         = NULL
161 };
162 
arcnet_raw_init(void)163 static int __init arcnet_raw_init(void)
164 {
165 	int count;
166 
167 	pr_info("raw mode (`r') encapsulation support loaded\n");
168 
169 	for (count = 0; count < 256; count++)
170 		if (arc_proto_map[count] == arc_proto_default)
171 			arc_proto_map[count] = &rawmode_proto;
172 
173 	/* for raw mode, we only set the bcast proto if there's no better one */
174 	if (arc_bcast_proto == arc_proto_default)
175 		arc_bcast_proto = &rawmode_proto;
176 
177 	arc_proto_default = &rawmode_proto;
178 	return 0;
179 }
180 
arcnet_raw_exit(void)181 static void __exit arcnet_raw_exit(void)
182 {
183 	arcnet_unregister_proto(&rawmode_proto);
184 }
185 
186 module_init(arcnet_raw_init);
187 module_exit(arcnet_raw_exit);
188 
189 MODULE_LICENSE("GPL");
190