1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * TI LP8788 MFD - buck regulator driver
4 *
5 * Copyright 2012 Texas Instruments
6 *
7 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
8 */
9
10 #include <linux/module.h>
11 #include <linux/slab.h>
12 #include <linux/err.h>
13 #include <linux/platform_device.h>
14 #include <linux/regulator/driver.h>
15 #include <linux/mfd/lp8788.h>
16 #include <linux/gpio.h>
17
18 /* register address */
19 #define LP8788_EN_BUCK 0x0C
20 #define LP8788_BUCK_DVS_SEL 0x1D
21 #define LP8788_BUCK1_VOUT0 0x1E
22 #define LP8788_BUCK1_VOUT1 0x1F
23 #define LP8788_BUCK1_VOUT2 0x20
24 #define LP8788_BUCK1_VOUT3 0x21
25 #define LP8788_BUCK2_VOUT0 0x22
26 #define LP8788_BUCK2_VOUT1 0x23
27 #define LP8788_BUCK2_VOUT2 0x24
28 #define LP8788_BUCK2_VOUT3 0x25
29 #define LP8788_BUCK3_VOUT 0x26
30 #define LP8788_BUCK4_VOUT 0x27
31 #define LP8788_BUCK1_TIMESTEP 0x28
32 #define LP8788_BUCK_PWM 0x2D
33
34 /* mask/shift bits */
35 #define LP8788_EN_BUCK1_M BIT(0) /* Addr 0Ch */
36 #define LP8788_EN_BUCK2_M BIT(1)
37 #define LP8788_EN_BUCK3_M BIT(2)
38 #define LP8788_EN_BUCK4_M BIT(3)
39 #define LP8788_BUCK1_DVS_SEL_M 0x04 /* Addr 1Dh */
40 #define LP8788_BUCK1_DVS_M 0x03
41 #define LP8788_BUCK1_DVS_S 0
42 #define LP8788_BUCK2_DVS_SEL_M 0x40
43 #define LP8788_BUCK2_DVS_M 0x30
44 #define LP8788_BUCK2_DVS_S 4
45 #define LP8788_BUCK1_DVS_I2C BIT(2)
46 #define LP8788_BUCK2_DVS_I2C BIT(6)
47 #define LP8788_BUCK1_DVS_PIN (0 << 2)
48 #define LP8788_BUCK2_DVS_PIN (0 << 6)
49 #define LP8788_VOUT_M 0x1F /* Addr 1Eh ~ 27h */
50 #define LP8788_STARTUP_TIME_M 0xF8 /* Addr 28h ~ 2Bh */
51 #define LP8788_STARTUP_TIME_S 3
52 #define LP8788_FPWM_BUCK1_M BIT(0) /* Addr 2Dh */
53 #define LP8788_FPWM_BUCK1_S 0
54 #define LP8788_FPWM_BUCK2_M BIT(1)
55 #define LP8788_FPWM_BUCK2_S 1
56 #define LP8788_FPWM_BUCK3_M BIT(2)
57 #define LP8788_FPWM_BUCK3_S 2
58 #define LP8788_FPWM_BUCK4_M BIT(3)
59 #define LP8788_FPWM_BUCK4_S 3
60
61 #define INVALID_ADDR 0xFF
62 #define LP8788_FORCE_PWM 1
63 #define LP8788_AUTO_PWM 0
64 #define PIN_LOW 0
65 #define PIN_HIGH 1
66 #define ENABLE_TIME_USEC 32
67
68 #define BUCK_FPWM_MASK(x) (1 << (x))
69 #define BUCK_FPWM_SHIFT(x) (x)
70
71 enum lp8788_dvs_state {
72 DVS_LOW = GPIOF_OUT_INIT_LOW,
73 DVS_HIGH = GPIOF_OUT_INIT_HIGH,
74 };
75
76 enum lp8788_dvs_mode {
77 REGISTER,
78 EXTPIN,
79 };
80
81 enum lp8788_buck_id {
82 BUCK1,
83 BUCK2,
84 BUCK3,
85 BUCK4,
86 };
87
88 struct lp8788_buck {
89 struct lp8788 *lp;
90 struct regulator_dev *regulator;
91 void *dvs;
92 };
93
94 /* BUCK 1 ~ 4 voltage ranges */
95 static const struct regulator_linear_range buck_volt_ranges[] = {
96 REGULATOR_LINEAR_RANGE(500000, 0, 0, 0),
97 REGULATOR_LINEAR_RANGE(800000, 1, 25, 50000),
98 };
99
lp8788_buck1_set_dvs(struct lp8788_buck * buck)100 static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
101 {
102 struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs;
103 enum lp8788_dvs_state pinstate;
104
105 if (!dvs)
106 return;
107
108 pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
109 if (gpio_is_valid(dvs->gpio))
110 gpio_set_value(dvs->gpio, pinstate);
111 }
112
lp8788_buck2_set_dvs(struct lp8788_buck * buck)113 static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
114 {
115 struct lp8788_buck2_dvs *dvs = (struct lp8788_buck2_dvs *)buck->dvs;
116 enum lp8788_dvs_state pin1, pin2;
117
118 if (!dvs)
119 return;
120
121 switch (dvs->vsel) {
122 case DVS_SEL_V0:
123 pin1 = DVS_LOW;
124 pin2 = DVS_LOW;
125 break;
126 case DVS_SEL_V1:
127 pin1 = DVS_HIGH;
128 pin2 = DVS_LOW;
129 break;
130 case DVS_SEL_V2:
131 pin1 = DVS_LOW;
132 pin2 = DVS_HIGH;
133 break;
134 case DVS_SEL_V3:
135 pin1 = DVS_HIGH;
136 pin2 = DVS_HIGH;
137 break;
138 default:
139 return;
140 }
141
142 if (gpio_is_valid(dvs->gpio[0]))
143 gpio_set_value(dvs->gpio[0], pin1);
144
145 if (gpio_is_valid(dvs->gpio[1]))
146 gpio_set_value(dvs->gpio[1], pin2);
147 }
148
lp8788_set_dvs(struct lp8788_buck * buck,enum lp8788_buck_id id)149 static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
150 {
151 switch (id) {
152 case BUCK1:
153 lp8788_buck1_set_dvs(buck);
154 break;
155 case BUCK2:
156 lp8788_buck2_set_dvs(buck);
157 break;
158 default:
159 break;
160 }
161 }
162
163 static enum lp8788_dvs_mode
lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck * buck,enum lp8788_buck_id id)164 lp8788_get_buck_dvs_ctrl_mode(struct lp8788_buck *buck, enum lp8788_buck_id id)
165 {
166 u8 val, mask;
167
168 switch (id) {
169 case BUCK1:
170 mask = LP8788_BUCK1_DVS_SEL_M;
171 break;
172 case BUCK2:
173 mask = LP8788_BUCK2_DVS_SEL_M;
174 break;
175 default:
176 return REGISTER;
177 }
178
179 lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
180
181 return val & mask ? REGISTER : EXTPIN;
182 }
183
lp8788_is_valid_buck_addr(u8 addr)184 static bool lp8788_is_valid_buck_addr(u8 addr)
185 {
186 switch (addr) {
187 case LP8788_BUCK1_VOUT0:
188 case LP8788_BUCK1_VOUT1:
189 case LP8788_BUCK1_VOUT2:
190 case LP8788_BUCK1_VOUT3:
191 case LP8788_BUCK2_VOUT0:
192 case LP8788_BUCK2_VOUT1:
193 case LP8788_BUCK2_VOUT2:
194 case LP8788_BUCK2_VOUT3:
195 return true;
196 default:
197 return false;
198 }
199 }
200
lp8788_select_buck_vout_addr(struct lp8788_buck * buck,enum lp8788_buck_id id)201 static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
202 enum lp8788_buck_id id)
203 {
204 enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
205 struct lp8788_buck1_dvs *b1_dvs;
206 struct lp8788_buck2_dvs *b2_dvs;
207 u8 val, idx, addr;
208 int pin1, pin2;
209
210 switch (id) {
211 case BUCK1:
212 if (mode == EXTPIN) {
213 b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs;
214 if (!b1_dvs)
215 goto err;
216
217 idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0;
218 } else {
219 lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
220 idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
221 }
222 addr = LP8788_BUCK1_VOUT0 + idx;
223 break;
224 case BUCK2:
225 if (mode == EXTPIN) {
226 b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs;
227 if (!b2_dvs)
228 goto err;
229
230 pin1 = gpio_get_value(b2_dvs->gpio[0]);
231 pin2 = gpio_get_value(b2_dvs->gpio[1]);
232
233 if (pin1 == PIN_LOW && pin2 == PIN_LOW)
234 idx = 0;
235 else if (pin1 == PIN_LOW && pin2 == PIN_HIGH)
236 idx = 2;
237 else if (pin1 == PIN_HIGH && pin2 == PIN_LOW)
238 idx = 1;
239 else
240 idx = 3;
241 } else {
242 lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
243 idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S;
244 }
245 addr = LP8788_BUCK2_VOUT0 + idx;
246 break;
247 default:
248 goto err;
249 }
250
251 return addr;
252 err:
253 return INVALID_ADDR;
254 }
255
lp8788_buck12_set_voltage_sel(struct regulator_dev * rdev,unsigned selector)256 static int lp8788_buck12_set_voltage_sel(struct regulator_dev *rdev,
257 unsigned selector)
258 {
259 struct lp8788_buck *buck = rdev_get_drvdata(rdev);
260 enum lp8788_buck_id id = rdev_get_id(rdev);
261 u8 addr;
262
263 if (buck->dvs)
264 lp8788_set_dvs(buck, id);
265
266 addr = lp8788_select_buck_vout_addr(buck, id);
267 if (!lp8788_is_valid_buck_addr(addr))
268 return -EINVAL;
269
270 return lp8788_update_bits(buck->lp, addr, LP8788_VOUT_M, selector);
271 }
272
lp8788_buck12_get_voltage_sel(struct regulator_dev * rdev)273 static int lp8788_buck12_get_voltage_sel(struct regulator_dev *rdev)
274 {
275 struct lp8788_buck *buck = rdev_get_drvdata(rdev);
276 enum lp8788_buck_id id = rdev_get_id(rdev);
277 int ret;
278 u8 val, addr;
279
280 addr = lp8788_select_buck_vout_addr(buck, id);
281 if (!lp8788_is_valid_buck_addr(addr))
282 return -EINVAL;
283
284 ret = lp8788_read_byte(buck->lp, addr, &val);
285 if (ret)
286 return ret;
287
288 return val & LP8788_VOUT_M;
289 }
290
lp8788_buck_enable_time(struct regulator_dev * rdev)291 static int lp8788_buck_enable_time(struct regulator_dev *rdev)
292 {
293 struct lp8788_buck *buck = rdev_get_drvdata(rdev);
294 enum lp8788_buck_id id = rdev_get_id(rdev);
295 u8 val, addr = LP8788_BUCK1_TIMESTEP + id;
296
297 if (lp8788_read_byte(buck->lp, addr, &val))
298 return -EINVAL;
299
300 val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;
301
302 return ENABLE_TIME_USEC * val;
303 }
304
lp8788_buck_set_mode(struct regulator_dev * rdev,unsigned int mode)305 static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
306 {
307 struct lp8788_buck *buck = rdev_get_drvdata(rdev);
308 enum lp8788_buck_id id = rdev_get_id(rdev);
309 u8 mask, val;
310
311 mask = BUCK_FPWM_MASK(id);
312 switch (mode) {
313 case REGULATOR_MODE_FAST:
314 val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
315 break;
316 case REGULATOR_MODE_NORMAL:
317 val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
318 break;
319 default:
320 return -EINVAL;
321 }
322
323 return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
324 }
325
lp8788_buck_get_mode(struct regulator_dev * rdev)326 static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
327 {
328 struct lp8788_buck *buck = rdev_get_drvdata(rdev);
329 enum lp8788_buck_id id = rdev_get_id(rdev);
330 u8 val;
331 int ret;
332
333 ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
334 if (ret)
335 return ret;
336
337 return val & BUCK_FPWM_MASK(id) ?
338 REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
339 }
340
341 static const struct regulator_ops lp8788_buck12_ops = {
342 .list_voltage = regulator_list_voltage_linear_range,
343 .map_voltage = regulator_map_voltage_linear_range,
344 .set_voltage_sel = lp8788_buck12_set_voltage_sel,
345 .get_voltage_sel = lp8788_buck12_get_voltage_sel,
346 .enable = regulator_enable_regmap,
347 .disable = regulator_disable_regmap,
348 .is_enabled = regulator_is_enabled_regmap,
349 .enable_time = lp8788_buck_enable_time,
350 .set_mode = lp8788_buck_set_mode,
351 .get_mode = lp8788_buck_get_mode,
352 };
353
354 static const struct regulator_ops lp8788_buck34_ops = {
355 .list_voltage = regulator_list_voltage_linear_range,
356 .map_voltage = regulator_map_voltage_linear_range,
357 .set_voltage_sel = regulator_set_voltage_sel_regmap,
358 .get_voltage_sel = regulator_get_voltage_sel_regmap,
359 .enable = regulator_enable_regmap,
360 .disable = regulator_disable_regmap,
361 .is_enabled = regulator_is_enabled_regmap,
362 .enable_time = lp8788_buck_enable_time,
363 .set_mode = lp8788_buck_set_mode,
364 .get_mode = lp8788_buck_get_mode,
365 };
366
367 static const struct regulator_desc lp8788_buck_desc[] = {
368 {
369 .name = "buck1",
370 .id = BUCK1,
371 .ops = &lp8788_buck12_ops,
372 .n_voltages = 26,
373 .linear_ranges = buck_volt_ranges,
374 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
375 .type = REGULATOR_VOLTAGE,
376 .owner = THIS_MODULE,
377 .enable_reg = LP8788_EN_BUCK,
378 .enable_mask = LP8788_EN_BUCK1_M,
379 },
380 {
381 .name = "buck2",
382 .id = BUCK2,
383 .ops = &lp8788_buck12_ops,
384 .n_voltages = 26,
385 .linear_ranges = buck_volt_ranges,
386 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
387 .type = REGULATOR_VOLTAGE,
388 .owner = THIS_MODULE,
389 .enable_reg = LP8788_EN_BUCK,
390 .enable_mask = LP8788_EN_BUCK2_M,
391 },
392 {
393 .name = "buck3",
394 .id = BUCK3,
395 .ops = &lp8788_buck34_ops,
396 .n_voltages = 26,
397 .linear_ranges = buck_volt_ranges,
398 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
399 .type = REGULATOR_VOLTAGE,
400 .owner = THIS_MODULE,
401 .vsel_reg = LP8788_BUCK3_VOUT,
402 .vsel_mask = LP8788_VOUT_M,
403 .enable_reg = LP8788_EN_BUCK,
404 .enable_mask = LP8788_EN_BUCK3_M,
405 },
406 {
407 .name = "buck4",
408 .id = BUCK4,
409 .ops = &lp8788_buck34_ops,
410 .n_voltages = 26,
411 .linear_ranges = buck_volt_ranges,
412 .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges),
413 .type = REGULATOR_VOLTAGE,
414 .owner = THIS_MODULE,
415 .vsel_reg = LP8788_BUCK4_VOUT,
416 .vsel_mask = LP8788_VOUT_M,
417 .enable_reg = LP8788_EN_BUCK,
418 .enable_mask = LP8788_EN_BUCK4_M,
419 },
420 };
421
lp8788_dvs_gpio_request(struct platform_device * pdev,struct lp8788_buck * buck,enum lp8788_buck_id id)422 static int lp8788_dvs_gpio_request(struct platform_device *pdev,
423 struct lp8788_buck *buck,
424 enum lp8788_buck_id id)
425 {
426 struct lp8788_platform_data *pdata = buck->lp->pdata;
427 char *b1_name = "LP8788_B1_DVS";
428 char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" };
429 int i, gpio, ret;
430
431 switch (id) {
432 case BUCK1:
433 gpio = pdata->buck1_dvs->gpio;
434 ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
435 b1_name);
436 if (ret)
437 return ret;
438
439 buck->dvs = pdata->buck1_dvs;
440 break;
441 case BUCK2:
442 for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
443 gpio = pdata->buck2_dvs->gpio[i];
444 ret = devm_gpio_request_one(&pdev->dev, gpio,
445 DVS_LOW, b2_name[i]);
446 if (ret)
447 return ret;
448 }
449 buck->dvs = pdata->buck2_dvs;
450 break;
451 default:
452 break;
453 }
454
455 return 0;
456 }
457
lp8788_init_dvs(struct platform_device * pdev,struct lp8788_buck * buck,enum lp8788_buck_id id)458 static int lp8788_init_dvs(struct platform_device *pdev,
459 struct lp8788_buck *buck, enum lp8788_buck_id id)
460 {
461 struct lp8788_platform_data *pdata = buck->lp->pdata;
462 u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M };
463 u8 val[] = { LP8788_BUCK1_DVS_PIN, LP8788_BUCK2_DVS_PIN };
464 u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C };
465
466 /* no dvs for buck3, 4 */
467 if (id > BUCK2)
468 return 0;
469
470 /* no dvs platform data, then dvs will be selected by I2C registers */
471 if (!pdata)
472 goto set_default_dvs_mode;
473
474 if ((id == BUCK1 && !pdata->buck1_dvs) ||
475 (id == BUCK2 && !pdata->buck2_dvs))
476 goto set_default_dvs_mode;
477
478 if (lp8788_dvs_gpio_request(pdev, buck, id))
479 goto set_default_dvs_mode;
480
481 return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
482 val[id]);
483
484 set_default_dvs_mode:
485 return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id],
486 default_dvs_mode[id]);
487 }
488
lp8788_buck_probe(struct platform_device * pdev)489 static int lp8788_buck_probe(struct platform_device *pdev)
490 {
491 struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
492 int id = pdev->id;
493 struct lp8788_buck *buck;
494 struct regulator_config cfg = { };
495 struct regulator_dev *rdev;
496 int ret;
497
498 if (id >= LP8788_NUM_BUCKS)
499 return -EINVAL;
500
501 buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL);
502 if (!buck)
503 return -ENOMEM;
504
505 buck->lp = lp;
506
507 ret = lp8788_init_dvs(pdev, buck, id);
508 if (ret)
509 return ret;
510
511 cfg.dev = pdev->dev.parent;
512 cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL;
513 cfg.driver_data = buck;
514 cfg.regmap = lp->regmap;
515
516 rdev = devm_regulator_register(&pdev->dev, &lp8788_buck_desc[id], &cfg);
517 if (IS_ERR(rdev)) {
518 ret = PTR_ERR(rdev);
519 dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n",
520 id + 1, ret);
521 return ret;
522 }
523
524 buck->regulator = rdev;
525 platform_set_drvdata(pdev, buck);
526
527 return 0;
528 }
529
530 static struct platform_driver lp8788_buck_driver = {
531 .probe = lp8788_buck_probe,
532 .driver = {
533 .name = LP8788_DEV_BUCK,
534 },
535 };
536
lp8788_buck_init(void)537 static int __init lp8788_buck_init(void)
538 {
539 return platform_driver_register(&lp8788_buck_driver);
540 }
541 subsys_initcall(lp8788_buck_init);
542
lp8788_buck_exit(void)543 static void __exit lp8788_buck_exit(void)
544 {
545 platform_driver_unregister(&lp8788_buck_driver);
546 }
547 module_exit(lp8788_buck_exit);
548
549 MODULE_DESCRIPTION("TI LP8788 BUCK Driver");
550 MODULE_AUTHOR("Milo Kim");
551 MODULE_LICENSE("GPL");
552 MODULE_ALIAS("platform:lp8788-buck");
553