1What: /sys/bus/iio/devices/deviceX/inY-inZ_balance_switch_en 2KernelVersion: 3.0.0 3Contact: linux-iio@vger.kernel.org 4Description: 5 Writing 1 enables the cell balance output switch corresponding 6 to input Y. Writing 0 disables it. If the inY-inZ_balance_timer 7 is set to a none zero value, the corresponding switch will 8 enable for the programmed amount of time, before it 9 automatically disables. 10 11What: /sys/bus/iio/devices/deviceX/inY-inZ_balance_timer 12KernelVersion: 3.0.0 13Contact: linux-iio@vger.kernel.org 14Description: 15 The inY-inZ_balance_timer file allows the user to program 16 individual times for each cell balance output. The AD7280A 17 allows the user to set the timer to a value from 0 minutes to 18 36.9 minutes. The resolution of the timer is 71.5 sec. 19 The value written is the on-time in milliseconds. When the 20 timer value is set 0, the timer is disabled. The cell balance 21 outputs are controlled only by inY-inZ_balance_switch_en. 22