1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * EHCI HCD (Host Controller Driver) PCI Bus Glue.
4 *
5 * Copyright (c) 2000-2004 by David Brownell
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <linux/pci.h>
11 #include <linux/usb.h>
12 #include <linux/usb/hcd.h>
13
14 #include "ehci.h"
15 #include "pci-quirks.h"
16
17 #define DRIVER_DESC "EHCI PCI platform driver"
18
19 static const char hcd_name[] = "ehci-pci";
20
21 /* defined here to avoid adding to pci_ids.h for single instance use */
22 #define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70
23
24 /*-------------------------------------------------------------------------*/
25 #define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939
is_intel_quark_x1000(struct pci_dev * pdev)26 static inline bool is_intel_quark_x1000(struct pci_dev *pdev)
27 {
28 return pdev->vendor == PCI_VENDOR_ID_INTEL &&
29 pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
30 }
31
32 /*
33 * This is the list of PCI IDs for the devices that have EHCI USB class and
34 * specific drivers for that. One of the example is a ChipIdea device installed
35 * on some Intel MID platforms.
36 */
37 static const struct pci_device_id bypass_pci_id_table[] = {
38 /* ChipIdea on Intel MID platform */
39 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), },
40 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), },
41 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), },
42 {}
43 };
44
is_bypassed_id(struct pci_dev * pdev)45 static inline bool is_bypassed_id(struct pci_dev *pdev)
46 {
47 return !!pci_match_id(bypass_pci_id_table, pdev);
48 }
49
50 /*
51 * 0x84 is the offset of in/out threshold register,
52 * and it is the same offset as the register of 'hostpc'.
53 */
54 #define intel_quark_x1000_insnreg01 hostpc
55
56 /* Maximum usable threshold value is 0x7f dwords for both IN and OUT */
57 #define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f
58
59 /* called after powerup, by probe or system-pm "wakeup" */
ehci_pci_reinit(struct ehci_hcd * ehci,struct pci_dev * pdev)60 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
61 {
62 int retval;
63
64 /* we expect static quirk code to handle the "extended capabilities"
65 * (currently just BIOS handoff) allowed starting with EHCI 0.96
66 */
67
68 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
69 retval = pci_set_mwi(pdev);
70 if (!retval)
71 ehci_dbg(ehci, "MWI active\n");
72
73 /* Reset the threshold limit */
74 if (is_intel_quark_x1000(pdev)) {
75 /*
76 * For the Intel QUARK X1000, raise the I/O threshold to the
77 * maximum usable value in order to improve performance.
78 */
79 ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD,
80 ehci->regs->intel_quark_x1000_insnreg01);
81 }
82
83 return 0;
84 }
85
86 /* called during probe() after chip reset completes */
ehci_pci_setup(struct usb_hcd * hcd)87 static int ehci_pci_setup(struct usb_hcd *hcd)
88 {
89 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
90 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
91 u32 temp;
92 int retval;
93
94 ehci->caps = hcd->regs;
95
96 /*
97 * ehci_init() causes memory for DMA transfers to be
98 * allocated. Thus, any vendor-specific workarounds based on
99 * limiting the type of memory used for DMA transfers must
100 * happen before ehci_setup() is called.
101 *
102 * Most other workarounds can be done either before or after
103 * init and reset; they are located here too.
104 */
105 switch (pdev->vendor) {
106 case PCI_VENDOR_ID_TOSHIBA_2:
107 /* celleb's companion chip */
108 if (pdev->device == 0x01b5) {
109 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
110 ehci->big_endian_mmio = 1;
111 #else
112 ehci_warn(ehci,
113 "unsupported big endian Toshiba quirk\n");
114 #endif
115 }
116 break;
117 case PCI_VENDOR_ID_NVIDIA:
118 /* NVidia reports that certain chips don't handle
119 * QH, ITD, or SITD addresses above 2GB. (But TD,
120 * data buffer, and periodic schedule are normal.)
121 */
122 switch (pdev->device) {
123 case 0x003c: /* MCP04 */
124 case 0x005b: /* CK804 */
125 case 0x00d8: /* CK8 */
126 case 0x00e8: /* CK8S */
127 if (pci_set_consistent_dma_mask(pdev,
128 DMA_BIT_MASK(31)) < 0)
129 ehci_warn(ehci, "can't enable NVidia "
130 "workaround for >2GB RAM\n");
131 break;
132
133 /* Some NForce2 chips have problems with selective suspend;
134 * fixed in newer silicon.
135 */
136 case 0x0068:
137 if (pdev->revision < 0xa4)
138 ehci->no_selective_suspend = 1;
139 break;
140 }
141 break;
142 case PCI_VENDOR_ID_INTEL:
143 if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB)
144 hcd->has_tt = 1;
145 break;
146 case PCI_VENDOR_ID_TDI:
147 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI)
148 hcd->has_tt = 1;
149 break;
150 case PCI_VENDOR_ID_AMD:
151 /* AMD PLL quirk */
152 if (usb_amd_quirk_pll_check())
153 ehci->amd_pll_fix = 1;
154 /* AMD8111 EHCI doesn't work, according to AMD errata */
155 if (pdev->device == 0x7463) {
156 ehci_info(ehci, "ignoring AMD8111 (errata)\n");
157 retval = -EIO;
158 goto done;
159 }
160
161 /*
162 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
163 * read/write memory space which does not belong to it when
164 * there is NULL pointer with T-bit set to 1 in the frame list
165 * table. To avoid the issue, the frame list link pointer
166 * should always contain a valid pointer to a inactive qh.
167 */
168 if (pdev->device == 0x7808) {
169 ehci->use_dummy_qh = 1;
170 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
171 }
172 break;
173 case PCI_VENDOR_ID_VIA:
174 if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
175 u8 tmp;
176
177 /* The VT6212 defaults to a 1 usec EHCI sleep time which
178 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
179 * that sleep time use the conventional 10 usec.
180 */
181 pci_read_config_byte(pdev, 0x4b, &tmp);
182 if (tmp & 0x20)
183 break;
184 pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
185 }
186 break;
187 case PCI_VENDOR_ID_ATI:
188 /* AMD PLL quirk */
189 if (usb_amd_quirk_pll_check())
190 ehci->amd_pll_fix = 1;
191
192 /*
193 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
194 * read/write memory space which does not belong to it when
195 * there is NULL pointer with T-bit set to 1 in the frame list
196 * table. To avoid the issue, the frame list link pointer
197 * should always contain a valid pointer to a inactive qh.
198 */
199 if (pdev->device == 0x4396) {
200 ehci->use_dummy_qh = 1;
201 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n");
202 }
203 /* SB600 and old version of SB700 have a bug in EHCI controller,
204 * which causes usb devices lose response in some cases.
205 */
206 if ((pdev->device == 0x4386 || pdev->device == 0x4396) &&
207 usb_amd_hang_symptom_quirk()) {
208 u8 tmp;
209 ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n");
210 pci_read_config_byte(pdev, 0x53, &tmp);
211 pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
212 }
213 break;
214 case PCI_VENDOR_ID_NETMOS:
215 /* MosChip frame-index-register bug */
216 ehci_info(ehci, "applying MosChip frame-index workaround\n");
217 ehci->frame_index_bug = 1;
218 break;
219 }
220
221 /* optional debug port, normally in the first BAR */
222 temp = pci_find_capability(pdev, PCI_CAP_ID_DBG);
223 if (temp) {
224 pci_read_config_dword(pdev, temp, &temp);
225 temp >>= 16;
226 if (((temp >> 13) & 7) == 1) {
227 u32 hcs_params = ehci_readl(ehci,
228 &ehci->caps->hcs_params);
229
230 temp &= 0x1fff;
231 ehci->debug = hcd->regs + temp;
232 temp = ehci_readl(ehci, &ehci->debug->control);
233 ehci_info(ehci, "debug port %d%s\n",
234 HCS_DEBUG_PORT(hcs_params),
235 (temp & DBGP_ENABLED) ? " IN USE" : "");
236 if (!(temp & DBGP_ENABLED))
237 ehci->debug = NULL;
238 }
239 }
240
241 retval = ehci_setup(hcd);
242 if (retval)
243 return retval;
244
245 /* These workarounds need to be applied after ehci_setup() */
246 switch (pdev->vendor) {
247 case PCI_VENDOR_ID_NEC:
248 case PCI_VENDOR_ID_INTEL:
249 case PCI_VENDOR_ID_AMD:
250 ehci->need_io_watchdog = 0;
251 break;
252 case PCI_VENDOR_ID_NVIDIA:
253 switch (pdev->device) {
254 /* MCP89 chips on the MacBookAir3,1 give EPROTO when
255 * fetching device descriptors unless LPM is disabled.
256 * There are also intermittent problems enumerating
257 * devices with PPCD enabled.
258 */
259 case 0x0d9d:
260 ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
261 ehci->has_ppcd = 0;
262 ehci->command &= ~CMD_PPCEE;
263 break;
264 }
265 break;
266 }
267
268 /* at least the Genesys GL880S needs fixup here */
269 temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
270 temp &= 0x0f;
271 if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
272 ehci_dbg(ehci, "bogus port configuration: "
273 "cc=%d x pcc=%d < ports=%d\n",
274 HCS_N_CC(ehci->hcs_params),
275 HCS_N_PCC(ehci->hcs_params),
276 HCS_N_PORTS(ehci->hcs_params));
277
278 switch (pdev->vendor) {
279 case 0x17a0: /* GENESYS */
280 /* GL880S: should be PORTS=2 */
281 temp |= (ehci->hcs_params & ~0xf);
282 ehci->hcs_params = temp;
283 break;
284 case PCI_VENDOR_ID_NVIDIA:
285 /* NF4: should be PCC=10 */
286 break;
287 }
288 }
289
290 /* Serial Bus Release Number is at PCI 0x60 offset */
291 if (pdev->vendor == PCI_VENDOR_ID_STMICRO
292 && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST)
293 ; /* ConneXT has no sbrn register */
294 else
295 pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
296
297 /* Keep this around for a while just in case some EHCI
298 * implementation uses legacy PCI PM support. This test
299 * can be removed on 17 Dec 2009 if the dev_warn() hasn't
300 * been triggered by then.
301 */
302 if (!device_can_wakeup(&pdev->dev)) {
303 u16 port_wake;
304
305 pci_read_config_word(pdev, 0x62, &port_wake);
306 if (port_wake & 0x0001) {
307 dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
308 device_set_wakeup_capable(&pdev->dev, 1);
309 }
310 }
311
312 #ifdef CONFIG_PM
313 if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
314 ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
315 #endif
316
317 retval = ehci_pci_reinit(ehci, pdev);
318 done:
319 return retval;
320 }
321
322 /*-------------------------------------------------------------------------*/
323
324 #ifdef CONFIG_PM
325
326 /* suspend/resume, section 4.3 */
327
328 /* These routines rely on the PCI bus glue
329 * to handle powerdown and wakeup, and currently also on
330 * transceivers that don't need any software attention to set up
331 * the right sort of wakeup.
332 * Also they depend on separate root hub suspend/resume.
333 */
334
ehci_pci_resume(struct usb_hcd * hcd,bool hibernated)335 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
336 {
337 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
338 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
339
340 if (ehci_resume(hcd, hibernated) != 0)
341 (void) ehci_pci_reinit(ehci, pdev);
342 return 0;
343 }
344
345 #else
346
347 #define ehci_suspend NULL
348 #define ehci_pci_resume NULL
349 #endif /* CONFIG_PM */
350
351 static struct hc_driver __read_mostly ehci_pci_hc_driver;
352
353 static const struct ehci_driver_overrides pci_overrides __initconst = {
354 .reset = ehci_pci_setup,
355 };
356
357 /*-------------------------------------------------------------------------*/
358
ehci_pci_probe(struct pci_dev * pdev,const struct pci_device_id * id)359 static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
360 {
361 if (is_bypassed_id(pdev))
362 return -ENODEV;
363 return usb_hcd_pci_probe(pdev, id);
364 }
365
ehci_pci_remove(struct pci_dev * pdev)366 static void ehci_pci_remove(struct pci_dev *pdev)
367 {
368 pci_clear_mwi(pdev);
369 usb_hcd_pci_remove(pdev);
370 }
371
372 /* PCI driver selection metadata; PCI hotplugging uses this */
373 static const struct pci_device_id pci_ids [] = { {
374 /* handle any USB 2.0 EHCI controller */
375 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
376 .driver_data = (unsigned long) &ehci_pci_hc_driver,
377 }, {
378 PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST),
379 .driver_data = (unsigned long) &ehci_pci_hc_driver,
380 },
381 { /* end: all zeroes */ }
382 };
383 MODULE_DEVICE_TABLE(pci, pci_ids);
384
385 /* pci driver glue; this is a "new style" PCI driver module */
386 static struct pci_driver ehci_pci_driver = {
387 .name = (char *) hcd_name,
388 .id_table = pci_ids,
389
390 .probe = ehci_pci_probe,
391 .remove = ehci_pci_remove,
392 .shutdown = usb_hcd_pci_shutdown,
393
394 #ifdef CONFIG_PM
395 .driver = {
396 .pm = &usb_hcd_pci_pm_ops
397 },
398 #endif
399 };
400
ehci_pci_init(void)401 static int __init ehci_pci_init(void)
402 {
403 if (usb_disabled())
404 return -ENODEV;
405
406 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
407
408 ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides);
409
410 /* Entries for the PCI suspend/resume callbacks are special */
411 ehci_pci_hc_driver.pci_suspend = ehci_suspend;
412 ehci_pci_hc_driver.pci_resume = ehci_pci_resume;
413
414 return pci_register_driver(&ehci_pci_driver);
415 }
416 module_init(ehci_pci_init);
417
ehci_pci_cleanup(void)418 static void __exit ehci_pci_cleanup(void)
419 {
420 pci_unregister_driver(&ehci_pci_driver);
421 }
422 module_exit(ehci_pci_cleanup);
423
424 MODULE_DESCRIPTION(DRIVER_DESC);
425 MODULE_AUTHOR("David Brownell");
426 MODULE_AUTHOR("Alan Stern");
427 MODULE_LICENSE("GPL");
428