1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
4 *
5 * Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
6 * and some other existing drivers
7 *
8 * The authors do NOT admit liability nor provide warranty for
9 * any of this software. This material is provided "AS-IS" in
10 * the hope that it may be useful for others.
11 *
12 * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de>
13 *
14 * History:
15 * 2003 - Created version 1.0 for Linux 2.4.x.
16 * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
17 * features. Released version 1.1
18 *
19 * Theory of operation:
20 *
21 * A Watchdog Timer (WDT) is a hardware circuit that can
22 * reset the computer system in case of a software fault.
23 * You probably knew that already.
24 *
25 * Usually a userspace daemon will notify the kernel WDT driver
26 * via the /dev/watchdog special device file that userspace is
27 * still alive, at regular intervals. When such a notification
28 * occurs, the driver will usually tell the hardware watchdog
29 * that everything is in order, and that the watchdog should wait
30 * for yet another little while to reset the system.
31 * If userspace fails (RAM error, kernel bug, whatever), the
32 * notifications cease to occur, and the hardware watchdog will
33 * reset the system (causing a reboot) after the timeout occurs.
34 *
35 * Create device with:
36 * mknod /dev/watchdog c 10 130
37 *
38 * For an example userspace keep-alive daemon, see:
39 * Documentation/watchdog/wdt.rst
40 */
41
42 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
43
44 #include <linux/module.h>
45 #include <linux/moduleparam.h>
46 #include <linux/types.h>
47 #include <linux/miscdevice.h>
48 #include <linux/watchdog.h>
49 #include <linux/delay.h>
50 #include <linux/fs.h>
51 #include <linux/ioport.h>
52 #include <linux/notifier.h>
53 #include <linux/reboot.h>
54 #include <linux/init.h>
55 #include <linux/spinlock.h>
56 #include <linux/io.h>
57 #include <linux/uaccess.h>
58
59
60 /* enable support for minutes as units? */
61 /* (does not always work correctly, so disabled by default!) */
62 #define SMSC_SUPPORT_MINUTES
63 #undef SMSC_SUPPORT_MINUTES
64
65 #define MAX_TIMEOUT 255
66
67 #define UNIT_SECOND 0
68 #define UNIT_MINUTE 1
69
70 #define VERSION "1.1"
71
72 #define IOPORT 0x3F0
73 #define IOPORT_SIZE 2
74 #define IODEV_NO 8
75
76 static int unit = UNIT_SECOND; /* timer's unit */
77 static int timeout = 60; /* timeout value: default is 60 "units" */
78 static unsigned long timer_enabled; /* is the timer enabled? */
79
80 static char expect_close; /* is the close expected? */
81
82 static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
83
84 static bool nowayout = WATCHDOG_NOWAYOUT;
85
86 /* -- Low level function ----------------------------------------*/
87
88 /* unlock the IO chip */
89
open_io_config(void)90 static inline void open_io_config(void)
91 {
92 outb(0x55, IOPORT);
93 mdelay(1);
94 outb(0x55, IOPORT);
95 }
96
97 /* lock the IO chip */
close_io_config(void)98 static inline void close_io_config(void)
99 {
100 outb(0xAA, IOPORT);
101 }
102
103 /* select the IO device */
select_io_device(unsigned char devno)104 static inline void select_io_device(unsigned char devno)
105 {
106 outb(0x07, IOPORT);
107 outb(devno, IOPORT+1);
108 }
109
110 /* write to the control register */
write_io_cr(unsigned char reg,unsigned char data)111 static inline void write_io_cr(unsigned char reg, unsigned char data)
112 {
113 outb(reg, IOPORT);
114 outb(data, IOPORT+1);
115 }
116
117 /* read from the control register */
read_io_cr(unsigned char reg)118 static inline char read_io_cr(unsigned char reg)
119 {
120 outb(reg, IOPORT);
121 return inb(IOPORT+1);
122 }
123
124 /* -- Medium level functions ------------------------------------*/
125
gpio_bit12(unsigned char reg)126 static inline void gpio_bit12(unsigned char reg)
127 {
128 /* -- General Purpose I/O Bit 1.2 --
129 * Bit 0, In/Out: 0 = Output, 1 = Input
130 * Bit 1, Polarity: 0 = No Invert, 1 = Invert
131 * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
132 * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
133 * 11 = Either Edge Triggered Intr. 2
134 * Bit 5/6 (Reserved)
135 * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
136 */
137 write_io_cr(0xE2, reg);
138 }
139
gpio_bit13(unsigned char reg)140 static inline void gpio_bit13(unsigned char reg)
141 {
142 /* -- General Purpose I/O Bit 1.3 --
143 * Bit 0, In/Out: 0 = Output, 1 = Input
144 * Bit 1, Polarity: 0 = No Invert, 1 = Invert
145 * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable
146 * Bit 3, Function select: 0 = GPI/O, 1 = LED
147 * Bit 4-6 (Reserved)
148 * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain
149 */
150 write_io_cr(0xE3, reg);
151 }
152
wdt_timer_units(unsigned char new_units)153 static inline void wdt_timer_units(unsigned char new_units)
154 {
155 /* -- Watchdog timer units --
156 * Bit 0-6 (Reserved)
157 * Bit 7, WDT Time-out Value Units Select
158 * (0 = Minutes, 1 = Seconds)
159 */
160 write_io_cr(0xF1, new_units);
161 }
162
wdt_timeout_value(unsigned char new_timeout)163 static inline void wdt_timeout_value(unsigned char new_timeout)
164 {
165 /* -- Watchdog Timer Time-out Value --
166 * Bit 0-7 Binary coded units (0=Disabled, 1..255)
167 */
168 write_io_cr(0xF2, new_timeout);
169 }
170
wdt_timer_conf(unsigned char conf)171 static inline void wdt_timer_conf(unsigned char conf)
172 {
173 /* -- Watchdog timer configuration --
174 * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon
175 * Gameport I/O
176 * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
177 * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
178 * Bit 3 Reset the timer
179 * (Wrong in SMsC documentation? Given as: PowerLED Timout
180 * Enabled)
181 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
182 * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
183 */
184 write_io_cr(0xF3, conf);
185 }
186
wdt_timer_ctrl(unsigned char reg)187 static inline void wdt_timer_ctrl(unsigned char reg)
188 {
189 /* -- Watchdog timer control --
190 * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occurred
191 * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
192 * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning)
193 * Bit 3 P20 Force Timeout enabled:
194 * 0 = P20 activity does not generate the WD timeout event
195 * 1 = P20 Allows rising edge of P20, from the keyboard
196 * controller, to force the WD timeout event.
197 * Bit 4 (Reserved)
198 * -- Soft power management --
199 * Bit 5 Stop Counter: 1 = Stop software power down counter
200 * set via register 0xB8, (self-cleaning)
201 * (Upon read: 0 = Counter running, 1 = Counter stopped)
202 * Bit 6 Restart Counter: 1 = Restart software power down counter
203 * set via register 0xB8, (self-cleaning)
204 * Bit 7 SPOFF: 1 = Force software power down (self-cleaning)
205 */
206 write_io_cr(0xF4, reg);
207 }
208
209 /* -- Higher level functions ------------------------------------*/
210
211 /* initialize watchdog */
212
wb_smsc_wdt_initialize(void)213 static void wb_smsc_wdt_initialize(void)
214 {
215 unsigned char old;
216
217 spin_lock(&io_lock);
218 open_io_config();
219 select_io_device(IODEV_NO);
220
221 /* enable the watchdog */
222 gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */
223 gpio_bit12(0x0A); /* Set pin 79 = WDT not
224 GPIO/Output/Polarity=Invert */
225 /* disable the timeout */
226 wdt_timeout_value(0);
227
228 /* reset control register */
229 wdt_timer_ctrl(0x00);
230
231 /* reset configuration register */
232 wdt_timer_conf(0x00);
233
234 /* read old (timer units) register */
235 old = read_io_cr(0xF1) & 0x7F;
236 if (unit == UNIT_SECOND)
237 old |= 0x80; /* set to seconds */
238
239 /* set the watchdog timer units */
240 wdt_timer_units(old);
241
242 close_io_config();
243 spin_unlock(&io_lock);
244 }
245
246 /* shutdown the watchdog */
247
wb_smsc_wdt_shutdown(void)248 static void wb_smsc_wdt_shutdown(void)
249 {
250 spin_lock(&io_lock);
251 open_io_config();
252 select_io_device(IODEV_NO);
253
254 /* disable the watchdog */
255 gpio_bit13(0x09);
256 gpio_bit12(0x09);
257
258 /* reset watchdog config register */
259 wdt_timer_conf(0x00);
260
261 /* reset watchdog control register */
262 wdt_timer_ctrl(0x00);
263
264 /* disable timeout */
265 wdt_timeout_value(0x00);
266
267 close_io_config();
268 spin_unlock(&io_lock);
269 }
270
271 /* set timeout => enable watchdog */
272
wb_smsc_wdt_set_timeout(unsigned char new_timeout)273 static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
274 {
275 spin_lock(&io_lock);
276 open_io_config();
277 select_io_device(IODEV_NO);
278
279 /* set Power LED to blink, if we enable the timeout */
280 wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
281
282 /* set timeout value */
283 wdt_timeout_value(new_timeout);
284
285 close_io_config();
286 spin_unlock(&io_lock);
287 }
288
289 /* get timeout */
290
wb_smsc_wdt_get_timeout(void)291 static unsigned char wb_smsc_wdt_get_timeout(void)
292 {
293 unsigned char set_timeout;
294
295 spin_lock(&io_lock);
296 open_io_config();
297 select_io_device(IODEV_NO);
298 set_timeout = read_io_cr(0xF2);
299 close_io_config();
300 spin_unlock(&io_lock);
301
302 return set_timeout;
303 }
304
305 /* disable watchdog */
306
wb_smsc_wdt_disable(void)307 static void wb_smsc_wdt_disable(void)
308 {
309 /* set the timeout to 0 to disable the watchdog */
310 wb_smsc_wdt_set_timeout(0);
311 }
312
313 /* enable watchdog by setting the current timeout */
314
wb_smsc_wdt_enable(void)315 static void wb_smsc_wdt_enable(void)
316 {
317 /* set the current timeout... */
318 wb_smsc_wdt_set_timeout(timeout);
319 }
320
321 /* reset the timer */
322
wb_smsc_wdt_reset_timer(void)323 static void wb_smsc_wdt_reset_timer(void)
324 {
325 spin_lock(&io_lock);
326 open_io_config();
327 select_io_device(IODEV_NO);
328
329 /* reset the timer */
330 wdt_timeout_value(timeout);
331 wdt_timer_conf(0x08);
332
333 close_io_config();
334 spin_unlock(&io_lock);
335 }
336
337 /* return, if the watchdog is enabled (timeout is set...) */
338
wb_smsc_wdt_status(void)339 static int wb_smsc_wdt_status(void)
340 {
341 return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING;
342 }
343
344
345 /* -- File operations -------------------------------------------*/
346
347 /* open => enable watchdog and set initial timeout */
348
wb_smsc_wdt_open(struct inode * inode,struct file * file)349 static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
350 {
351 /* /dev/watchdog can only be opened once */
352
353 if (test_and_set_bit(0, &timer_enabled))
354 return -EBUSY;
355
356 if (nowayout)
357 __module_get(THIS_MODULE);
358
359 /* Reload and activate timer */
360 wb_smsc_wdt_enable();
361
362 pr_info("Watchdog enabled. Timeout set to %d %s\n",
363 timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
364
365 return stream_open(inode, file);
366 }
367
368 /* close => shut off the timer */
369
wb_smsc_wdt_release(struct inode * inode,struct file * file)370 static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
371 {
372 /* Shut off the timer. */
373
374 if (expect_close == 42) {
375 wb_smsc_wdt_disable();
376 pr_info("Watchdog disabled, sleeping again...\n");
377 } else {
378 pr_crit("Unexpected close, not stopping watchdog!\n");
379 wb_smsc_wdt_reset_timer();
380 }
381
382 clear_bit(0, &timer_enabled);
383 expect_close = 0;
384 return 0;
385 }
386
387 /* write => update the timer to keep the machine alive */
388
wb_smsc_wdt_write(struct file * file,const char __user * data,size_t len,loff_t * ppos)389 static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
390 size_t len, loff_t *ppos)
391 {
392 /* See if we got the magic character 'V' and reload the timer */
393 if (len) {
394 if (!nowayout) {
395 size_t i;
396
397 /* reset expect flag */
398 expect_close = 0;
399
400 /* scan to see whether or not we got the
401 magic character */
402 for (i = 0; i != len; i++) {
403 char c;
404 if (get_user(c, data + i))
405 return -EFAULT;
406 if (c == 'V')
407 expect_close = 42;
408 }
409 }
410
411 /* someone wrote to us, we should reload the timer */
412 wb_smsc_wdt_reset_timer();
413 }
414 return len;
415 }
416
417 /* ioctl => control interface */
418
wb_smsc_wdt_ioctl(struct file * file,unsigned int cmd,unsigned long arg)419 static long wb_smsc_wdt_ioctl(struct file *file,
420 unsigned int cmd, unsigned long arg)
421 {
422 int new_timeout;
423
424 union {
425 struct watchdog_info __user *ident;
426 int __user *i;
427 } uarg;
428
429 static const struct watchdog_info ident = {
430 .options = WDIOF_KEEPALIVEPING |
431 WDIOF_SETTIMEOUT |
432 WDIOF_MAGICCLOSE,
433 .firmware_version = 0,
434 .identity = "SMsC 37B787 Watchdog",
435 };
436
437 uarg.i = (int __user *)arg;
438
439 switch (cmd) {
440 case WDIOC_GETSUPPORT:
441 return copy_to_user(uarg.ident, &ident, sizeof(ident))
442 ? -EFAULT : 0;
443 case WDIOC_GETSTATUS:
444 return put_user(wb_smsc_wdt_status(), uarg.i);
445 case WDIOC_GETBOOTSTATUS:
446 return put_user(0, uarg.i);
447 case WDIOC_SETOPTIONS:
448 {
449 int options, retval = -EINVAL;
450
451 if (get_user(options, uarg.i))
452 return -EFAULT;
453
454 if (options & WDIOS_DISABLECARD) {
455 wb_smsc_wdt_disable();
456 retval = 0;
457 }
458 if (options & WDIOS_ENABLECARD) {
459 wb_smsc_wdt_enable();
460 retval = 0;
461 }
462 return retval;
463 }
464 case WDIOC_KEEPALIVE:
465 wb_smsc_wdt_reset_timer();
466 return 0;
467 case WDIOC_SETTIMEOUT:
468 if (get_user(new_timeout, uarg.i))
469 return -EFAULT;
470 /* the API states this is given in secs */
471 if (unit == UNIT_MINUTE)
472 new_timeout /= 60;
473 if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
474 return -EINVAL;
475 timeout = new_timeout;
476 wb_smsc_wdt_set_timeout(timeout);
477 /* fall through - and return the new timeout... */
478 case WDIOC_GETTIMEOUT:
479 new_timeout = timeout;
480 if (unit == UNIT_MINUTE)
481 new_timeout *= 60;
482 return put_user(new_timeout, uarg.i);
483 default:
484 return -ENOTTY;
485 }
486 }
487
488 /* -- Notifier funtions -----------------------------------------*/
489
wb_smsc_wdt_notify_sys(struct notifier_block * this,unsigned long code,void * unused)490 static int wb_smsc_wdt_notify_sys(struct notifier_block *this,
491 unsigned long code, void *unused)
492 {
493 if (code == SYS_DOWN || code == SYS_HALT) {
494 /* set timeout to 0, to avoid possible race-condition */
495 timeout = 0;
496 wb_smsc_wdt_disable();
497 }
498 return NOTIFY_DONE;
499 }
500
501 /* -- Module's structures ---------------------------------------*/
502
503 static const struct file_operations wb_smsc_wdt_fops = {
504 .owner = THIS_MODULE,
505 .llseek = no_llseek,
506 .write = wb_smsc_wdt_write,
507 .unlocked_ioctl = wb_smsc_wdt_ioctl,
508 .open = wb_smsc_wdt_open,
509 .release = wb_smsc_wdt_release,
510 };
511
512 static struct notifier_block wb_smsc_wdt_notifier = {
513 .notifier_call = wb_smsc_wdt_notify_sys,
514 };
515
516 static struct miscdevice wb_smsc_wdt_miscdev = {
517 .minor = WATCHDOG_MINOR,
518 .name = "watchdog",
519 .fops = &wb_smsc_wdt_fops,
520 };
521
522 /* -- Module init functions -------------------------------------*/
523
524 /* module's "constructor" */
525
wb_smsc_wdt_init(void)526 static int __init wb_smsc_wdt_init(void)
527 {
528 int ret;
529
530 pr_info("SMsC 37B787 watchdog component driver "
531 VERSION " initialising...\n");
532
533 if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
534 pr_err("Unable to register IO port %#x\n", IOPORT);
535 ret = -EBUSY;
536 goto out_pnp;
537 }
538
539 /* set new maximum, if it's too big */
540 if (timeout > MAX_TIMEOUT)
541 timeout = MAX_TIMEOUT;
542
543 /* init the watchdog timer */
544 wb_smsc_wdt_initialize();
545
546 ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
547 if (ret) {
548 pr_err("Unable to register reboot notifier err = %d\n", ret);
549 goto out_io;
550 }
551
552 ret = misc_register(&wb_smsc_wdt_miscdev);
553 if (ret) {
554 pr_err("Unable to register miscdev on minor %d\n",
555 WATCHDOG_MINOR);
556 goto out_rbt;
557 }
558
559 /* output info */
560 pr_info("Timeout set to %d %s\n",
561 timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
562 pr_info("Watchdog initialized and sleeping (nowayout=%d)...\n",
563 nowayout);
564 out_clean:
565 return ret;
566
567 out_rbt:
568 unregister_reboot_notifier(&wb_smsc_wdt_notifier);
569
570 out_io:
571 release_region(IOPORT, IOPORT_SIZE);
572
573 out_pnp:
574 goto out_clean;
575 }
576
577 /* module's "destructor" */
578
wb_smsc_wdt_exit(void)579 static void __exit wb_smsc_wdt_exit(void)
580 {
581 /* Stop the timer before we leave */
582 if (!nowayout) {
583 wb_smsc_wdt_shutdown();
584 pr_info("Watchdog disabled\n");
585 }
586
587 misc_deregister(&wb_smsc_wdt_miscdev);
588 unregister_reboot_notifier(&wb_smsc_wdt_notifier);
589 release_region(IOPORT, IOPORT_SIZE);
590
591 pr_info("SMsC 37B787 watchdog component driver removed\n");
592 }
593
594 module_init(wb_smsc_wdt_init);
595 module_exit(wb_smsc_wdt_exit);
596
597 MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
598 MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version "
599 VERSION ")");
600 MODULE_LICENSE("GPL");
601
602 #ifdef SMSC_SUPPORT_MINUTES
603 module_param(unit, int, 0);
604 MODULE_PARM_DESC(unit,
605 "set unit to use, 0=seconds or 1=minutes, default is 0");
606 #endif
607
608 module_param(timeout, int, 0);
609 MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
610
611 module_param(nowayout, bool, 0);
612 MODULE_PARM_DESC(nowayout,
613 "Watchdog cannot be stopped once started (default="
614 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
615