1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * linux/arch/alpha/kernel/sys_eb64p.c
4 *
5 * Copyright (C) 1995 David A Rusling
6 * Copyright (C) 1996 Jay A Estabrook
7 * Copyright (C) 1998, 1999 Richard Henderson
8 *
9 * Code supporting the EB64+ and EB66.
10 */
11
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/sched.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/bitops.h>
19
20 #include <asm/ptrace.h>
21 #include <asm/dma.h>
22 #include <asm/irq.h>
23 #include <asm/mmu_context.h>
24 #include <asm/io.h>
25 #include <asm/pgtable.h>
26 #include <asm/core_apecs.h>
27 #include <asm/core_lca.h>
28 #include <asm/hwrpb.h>
29 #include <asm/tlbflush.h>
30
31 #include "proto.h"
32 #include "irq_impl.h"
33 #include "pci_impl.h"
34 #include "machvec_impl.h"
35
36
37 /* Note mask bit is true for DISABLED irqs. */
38 static unsigned int cached_irq_mask = -1;
39
40 static inline void
eb64p_update_irq_hw(unsigned int irq,unsigned long mask)41 eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
42 {
43 outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
44 }
45
46 static inline void
eb64p_enable_irq(struct irq_data * d)47 eb64p_enable_irq(struct irq_data *d)
48 {
49 eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
50 }
51
52 static void
eb64p_disable_irq(struct irq_data * d)53 eb64p_disable_irq(struct irq_data *d)
54 {
55 eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
56 }
57
58 static struct irq_chip eb64p_irq_type = {
59 .name = "EB64P",
60 .irq_unmask = eb64p_enable_irq,
61 .irq_mask = eb64p_disable_irq,
62 .irq_mask_ack = eb64p_disable_irq,
63 };
64
65 static void
eb64p_device_interrupt(unsigned long vector)66 eb64p_device_interrupt(unsigned long vector)
67 {
68 unsigned long pld;
69 unsigned int i;
70
71 /* Read the interrupt summary registers */
72 pld = inb(0x26) | (inb(0x27) << 8);
73
74 /*
75 * Now, for every possible bit set, work through
76 * them and call the appropriate interrupt handler.
77 */
78 while (pld) {
79 i = ffz(~pld);
80 pld &= pld - 1; /* clear least bit set */
81
82 if (i == 5) {
83 isa_device_interrupt(vector);
84 } else {
85 handle_irq(16 + i);
86 }
87 }
88 }
89
90 static void __init
eb64p_init_irq(void)91 eb64p_init_irq(void)
92 {
93 long i;
94
95 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
96 /*
97 * CABRIO SRM may not set variation correctly, so here we test
98 * the high word of the interrupt summary register for the RAZ
99 * bits, and hope that a true EB64+ would read all ones...
100 */
101 if (inw(0x806) != 0xffff) {
102 extern struct alpha_machine_vector cabriolet_mv;
103
104 printk("Detected Cabriolet: correcting HWRPB.\n");
105
106 hwrpb->sys_variation |= 2L << 10;
107 hwrpb_update_checksum(hwrpb);
108
109 alpha_mv = cabriolet_mv;
110 alpha_mv.init_irq();
111 return;
112 }
113 #endif /* GENERIC */
114
115 outb(0xff, 0x26);
116 outb(0xff, 0x27);
117
118 init_i8259a_irqs();
119
120 for (i = 16; i < 32; ++i) {
121 irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
122 irq_set_status_flags(i, IRQ_LEVEL);
123 }
124
125 common_init_isa_dma();
126 setup_irq(16+5, &isa_cascade_irqaction);
127 }
128
129 /*
130 * PCI Fixup configuration.
131 *
132 * There are two 8 bit external summary registers as follows:
133 *
134 * Summary @ 0x26:
135 * Bit Meaning
136 * 0 Interrupt Line A from slot 0
137 * 1 Interrupt Line A from slot 1
138 * 2 Interrupt Line B from slot 0
139 * 3 Interrupt Line B from slot 1
140 * 4 Interrupt Line C from slot 0
141 * 5 Interrupt line from the two ISA PICs
142 * 6 Tulip
143 * 7 NCR SCSI
144 *
145 * Summary @ 0x27
146 * Bit Meaning
147 * 0 Interrupt Line C from slot 1
148 * 1 Interrupt Line D from slot 0
149 * 2 Interrupt Line D from slot 1
150 * 3 RAZ
151 * 4 RAZ
152 * 5 RAZ
153 * 6 RAZ
154 * 7 RAZ
155 *
156 * The device to slot mapping looks like:
157 *
158 * Slot Device
159 * 5 NCR SCSI controller
160 * 6 PCI on board slot 0
161 * 7 PCI on board slot 1
162 * 8 Intel SIO PCI-ISA bridge chip
163 * 9 Tulip - DECchip 21040 Ethernet controller
164 *
165 *
166 * This two layered interrupt approach means that we allocate IRQ 16 and
167 * above for PCI interrupts. The IRQ relates to which bit the interrupt
168 * comes in on. This makes interrupt processing much easier.
169 */
170
171 static int
eb64p_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)172 eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
173 {
174 static char irq_tab[5][5] = {
175 /*INT INTA INTB INTC INTD */
176 {16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
177 {16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
178 {16+1, 16+1, 16+3, 16+8, 16+10}, /* IdSel 7, slot ?, ?? */
179 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
180 {16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 9, TULIP */
181 };
182 const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
183 return COMMON_TABLE_LOOKUP;
184 }
185
186
187 /*
188 * The System Vector
189 */
190
191 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
192 struct alpha_machine_vector eb64p_mv __initmv = {
193 .vector_name = "EB64+",
194 DO_EV4_MMU,
195 DO_DEFAULT_RTC,
196 DO_APECS_IO,
197 .machine_check = apecs_machine_check,
198 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
199 .min_io_address = DEFAULT_IO_BASE,
200 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
201
202 .nr_irqs = 32,
203 .device_interrupt = eb64p_device_interrupt,
204
205 .init_arch = apecs_init_arch,
206 .init_irq = eb64p_init_irq,
207 .init_rtc = common_init_rtc,
208 .init_pci = common_init_pci,
209 .kill_arch = NULL,
210 .pci_map_irq = eb64p_map_irq,
211 .pci_swizzle = common_swizzle,
212 };
213 ALIAS_MV(eb64p)
214 #endif
215
216 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
217 struct alpha_machine_vector eb66_mv __initmv = {
218 .vector_name = "EB66",
219 DO_EV4_MMU,
220 DO_DEFAULT_RTC,
221 DO_LCA_IO,
222 .machine_check = lca_machine_check,
223 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
224 .min_io_address = DEFAULT_IO_BASE,
225 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
226
227 .nr_irqs = 32,
228 .device_interrupt = eb64p_device_interrupt,
229
230 .init_arch = lca_init_arch,
231 .init_irq = eb64p_init_irq,
232 .init_rtc = common_init_rtc,
233 .init_pci = common_init_pci,
234 .pci_map_irq = eb64p_map_irq,
235 .pci_swizzle = common_swizzle,
236 };
237 ALIAS_MV(eb66)
238 #endif
239