1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 4 */ 5 6/* AM437x GP EVM */ 7 8/dts-v1/; 9 10#include "am4372.dtsi" 11#include <dt-bindings/pinctrl/am43xx.h> 12#include <dt-bindings/pwm/pwm.h> 13#include <dt-bindings/gpio/gpio.h> 14 15/ { 16 model = "TI AM437x GP EVM"; 17 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; 18 19 aliases { 20 display0 = &lcd0; 21 }; 22 23 chosen { 24 stdout-path = &uart0; 25 }; 26 27 evm_v3_3d: fixedregulator-v3_3d { 28 compatible = "regulator-fixed"; 29 regulator-name = "evm_v3_3d"; 30 regulator-min-microvolt = <3300000>; 31 regulator-max-microvolt = <3300000>; 32 enable-active-high; 33 }; 34 35 vtt_fixed: fixedregulator-vtt { 36 compatible = "regulator-fixed"; 37 regulator-name = "vtt_fixed"; 38 regulator-min-microvolt = <1500000>; 39 regulator-max-microvolt = <1500000>; 40 regulator-always-on; 41 regulator-boot-on; 42 enable-active-high; 43 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; 44 }; 45 46 vmmcwl_fixed: fixedregulator-mmcwl { 47 compatible = "regulator-fixed"; 48 regulator-name = "vmmcwl_fixed"; 49 regulator-min-microvolt = <1800000>; 50 regulator-max-microvolt = <1800000>; 51 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; 52 enable-active-high; 53 }; 54 55 lcd_bl: backlight { 56 compatible = "pwm-backlight"; 57 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; 58 brightness-levels = <0 51 53 56 62 75 101 152 255>; 59 default-brightness-level = <8>; 60 }; 61 62 matrix_keypad: matrix_keypad0 { 63 compatible = "gpio-matrix-keypad"; 64 debounce-delay-ms = <5>; 65 col-scan-delay-us = <2>; 66 67 pinctrl-names = "default", "sleep"; 68 pinctrl-0 = <&matrix_keypad_default>; 69 pinctrl-1 = <&matrix_keypad_sleep>; 70 71 wakeup-source; 72 73 row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */ 74 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */ 75 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */ 76 77 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */ 78 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */ 79 80 linux,keymap = <0x00000201 /* P1 */ 81 0x00010202 /* P2 */ 82 0x01000067 /* UP */ 83 0x0101006a /* RIGHT */ 84 0x02000069 /* LEFT */ 85 0x0201006c>; /* DOWN */ 86 }; 87 88 lcd0: display { 89 compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; 90 label = "lcd"; 91 92 backlight = <&lcd_bl>; 93 94 panel-timing { 95 clock-frequency = <33000000>; 96 hactive = <800>; 97 vactive = <480>; 98 hfront-porch = <210>; 99 hback-porch = <16>; 100 hsync-len = <30>; 101 vback-porch = <10>; 102 vfront-porch = <22>; 103 vsync-len = <13>; 104 hsync-active = <0>; 105 vsync-active = <0>; 106 de-active = <1>; 107 pixelclk-active = <1>; 108 }; 109 110 port { 111 lcd_in: endpoint { 112 remote-endpoint = <&dpi_out>; 113 }; 114 }; 115 }; 116 117 /* fixed 12MHz oscillator */ 118 refclk: oscillator { 119 #clock-cells = <0>; 120 compatible = "fixed-clock"; 121 clock-frequency = <12000000>; 122 }; 123 124 /* fixed 32k external oscillator clock */ 125 clk_32k_rtc: clk_32k_rtc { 126 #clock-cells = <0>; 127 compatible = "fixed-clock"; 128 clock-frequency = <32768>; 129 }; 130 131 sound0: sound0 { 132 compatible = "simple-audio-card"; 133 simple-audio-card,name = "AM437x-GP-EVM"; 134 simple-audio-card,widgets = 135 "Headphone", "Headphone Jack", 136 "Line", "Line In"; 137 simple-audio-card,routing = 138 "Headphone Jack", "HPLOUT", 139 "Headphone Jack", "HPROUT", 140 "LINE1L", "Line In", 141 "LINE1R", "Line In"; 142 simple-audio-card,format = "dsp_b"; 143 simple-audio-card,bitclock-master = <&sound0_master>; 144 simple-audio-card,frame-master = <&sound0_master>; 145 simple-audio-card,bitclock-inversion; 146 147 simple-audio-card,cpu { 148 sound-dai = <&mcasp1>; 149 system-clock-frequency = <12000000>; 150 }; 151 152 sound0_master: simple-audio-card,codec { 153 sound-dai = <&tlv320aic3106>; 154 system-clock-frequency = <12000000>; 155 }; 156 }; 157 158 beeper: beeper { 159 compatible = "gpio-beeper"; 160 pinctrl-names = "default"; 161 pinctrl-0 = <&beeper_pins_default>; 162 pinctrl-1 = <&beeper_pins_sleep>; 163 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; 164 }; 165}; 166 167&am43xx_pinmux { 168 pinctrl-names = "default", "sleep"; 169 pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>; 170 pinctrl-1 = <&wlan_pins_sleep>; 171 172 ddr3_vtt_toggle_default: ddr_vtt_toggle_default { 173 pinctrl-single,pins = < 174 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */ 175 >; 176 }; 177 178 i2c0_pins: i2c0_pins { 179 pinctrl-single,pins = < 180 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ 181 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ 182 >; 183 }; 184 185 i2c1_pins: i2c1_pins { 186 pinctrl-single,pins = < 187 AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ 188 AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ 189 >; 190 }; 191 192 mmc1_pins: pinmux_mmc1_pins { 193 pinctrl-single,pins = < 194 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ 195 >; 196 }; 197 198 ecap0_pins: backlight_pins { 199 pinctrl-single,pins = < 200 AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ 201 >; 202 }; 203 204 pixcir_ts_pins: pixcir_ts_pins { 205 pinctrl-single,pins = < 206 AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ 207 >; 208 }; 209 210 cpsw_default: cpsw_default { 211 pinctrl-single,pins = < 212 /* Slave 1 */ 213 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ 214 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ 215 AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ 216 AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ 217 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ 218 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ 219 AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ 220 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ 221 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ 222 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ 223 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ 224 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ 225 >; 226 }; 227 228 cpsw_sleep: cpsw_sleep { 229 pinctrl-single,pins = < 230 /* Slave 1 reset value */ 231 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) 232 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) 233 AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) 234 AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) 235 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) 236 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) 237 AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) 238 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) 239 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) 240 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) 241 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) 242 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) 243 >; 244 }; 245 246 davinci_mdio_default: davinci_mdio_default { 247 pinctrl-single,pins = < 248 /* MDIO */ 249 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ 250 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ 251 >; 252 }; 253 254 davinci_mdio_sleep: davinci_mdio_sleep { 255 pinctrl-single,pins = < 256 /* MDIO reset value */ 257 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) 258 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) 259 >; 260 }; 261 262 nand_flash_x8: nand_flash_x8 { 263 pinctrl-single,pins = < 264 AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 265 AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 266 AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ 267 AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ 268 AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ 269 AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ 270 AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ 271 AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ 272 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ 273 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ 274 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ 275 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ 276 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ 277 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ 278 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ 279 >; 280 }; 281 282 dss_pins: dss_pins { 283 pinctrl-single,pins = < 284 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ 285 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1) 286 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1) 287 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1) 288 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1) 289 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1) 290 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1) 291 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ 292 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ 293 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0) 294 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0) 295 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0) 296 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0) 297 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0) 298 AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0) 299 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0) 300 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0) 301 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0) 302 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0) 303 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0) 304 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0) 305 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0) 306 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0) 307 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ 308 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ 309 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ 310 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ 311 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ 312 313 >; 314 }; 315 316 display_mux_pins: display_mux_pins { 317 pinctrl-single,pins = < 318 /* GPIO 5_8 to select LCD / HDMI */ 319 AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7) 320 >; 321 }; 322 323 dcan0_default: dcan0_default_pins { 324 pinctrl-single,pins = < 325 AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */ 326 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */ 327 >; 328 }; 329 330 dcan0_sleep: dcan0_sleep_pins { 331 pinctrl-single,pins = < 332 AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ 333 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ 334 >; 335 }; 336 337 dcan1_default: dcan1_default_pins { 338 pinctrl-single,pins = < 339 AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ 340 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */ 341 >; 342 }; 343 344 dcan1_sleep: dcan1_sleep_pins { 345 pinctrl-single,pins = < 346 AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ 347 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ 348 >; 349 }; 350 351 vpfe0_pins_default: vpfe0_pins_default { 352 pinctrl-single,pins = < 353 AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ 354 AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/ 355 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/ 356 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/ 357 AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/ 358 AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/ 359 AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/ 360 AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/ 361 AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/ 362 AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/ 363 AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/ 364 AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/ 365 AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/ 366 >; 367 }; 368 369 vpfe0_pins_sleep: vpfe0_pins_sleep { 370 pinctrl-single,pins = < 371 AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/ 372 AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/ 373 AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/ 374 AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/ 375 AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/ 376 AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/ 377 AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/ 378 AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/ 379 AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/ 380 AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/ 381 AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/ 382 AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/ 383 AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/ 384 >; 385 }; 386 387 vpfe1_pins_default: vpfe1_pins_default { 388 pinctrl-single,pins = < 389 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/ 390 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/ 391 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/ 392 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/ 393 AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/ 394 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/ 395 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/ 396 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/ 397 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/ 398 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/ 399 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/ 400 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/ 401 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/ 402 >; 403 }; 404 405 vpfe1_pins_sleep: vpfe1_pins_sleep { 406 pinctrl-single,pins = < 407 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/ 408 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/ 409 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/ 410 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/ 411 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/ 412 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/ 413 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/ 414 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/ 415 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/ 416 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/ 417 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/ 418 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/ 419 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ 420 >; 421 }; 422 423 mmc3_pins_default: pinmux_mmc3_pins_default { 424 pinctrl-single,pins = < 425 AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ 426 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ 427 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ 428 AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ 429 AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ 430 AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ 431 >; 432 }; 433 434 mmc3_pins_sleep: pinmux_mmc3_pins_sleep { 435 pinctrl-single,pins = < 436 AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ 437 AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ 438 AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ 439 AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ 440 AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ 441 AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ 442 >; 443 }; 444 445 wlan_pins_default: pinmux_wlan_pins_default { 446 pinctrl-single,pins = < 447 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 448 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 449 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 450 >; 451 }; 452 453 wlan_pins_sleep: pinmux_wlan_pins_sleep { 454 pinctrl-single,pins = < 455 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ 456 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ 457 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ 458 >; 459 }; 460 461 uart3_pins: uart3_pins { 462 pinctrl-single,pins = < 463 AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ 464 AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ 465 AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ 466 AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ 467 >; 468 }; 469 470 mcasp1_pins: mcasp1_pins { 471 pinctrl-single,pins = < 472 AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ 473 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 474 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ 475 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ 476 >; 477 }; 478 479 mcasp1_sleep_pins: mcasp1_sleep_pins { 480 pinctrl-single,pins = < 481 AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) 482 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) 483 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 484 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) 485 >; 486 }; 487 488 gpio0_pins: gpio0_pins { 489 pinctrl-single,pins = < 490 AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ 491 >; 492 }; 493 494 emmc_pins_default: emmc_pins_default { 495 pinctrl-single,pins = < 496 AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ 497 AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ 498 AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ 499 AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ 500 AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ 501 AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ 502 AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ 503 AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ 504 AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ 505 AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ 506 >; 507 }; 508 509 emmc_pins_sleep: emmc_pins_sleep { 510 pinctrl-single,pins = < 511 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ 512 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ 513 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ 514 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ 515 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ 516 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ 517 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ 518 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ 519 AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ 520 AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ 521 >; 522 }; 523 524 beeper_pins_default: beeper_pins_default { 525 pinctrl-single,pins = < 526 AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */ 527 >; 528 }; 529 530 beeper_pins_sleep: beeper_pins_sleep { 531 pinctrl-single,pins = < 532 AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* cam1_field.gpio4_12 */ 533 >; 534 }; 535 536 unused_pins: unused_pins { 537 pinctrl-single,pins = < 538 AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7) 539 AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7) 540 AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7) 541 AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) 542 AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) 543 AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) 544 AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) 545 AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7) 546 AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7) 547 AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7) 548 AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7) 549 AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) 550 AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 551 AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7) 552 AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7) 553 AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7) 554 AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7) 555 AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7) 556 AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 557 AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7) 558 AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7) 559 AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7) 560 AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7) 561 AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7) 562 AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE) 563 AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN) 564 AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN) 565 AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7) 566 AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7) 567 AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7) 568 AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7) 569 AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7) 570 AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7) 571 AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7) 572 AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7) 573 AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7) 574 AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7) 575 AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7) 576 AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7) 577 AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7) 578 AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7) 579 AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7) 580 AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7) 581 AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7) 582 >; 583 }; 584 585 debugss_pins: pinmux_debugss_pins { 586 pinctrl-single,pins = < 587 AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN) 588 AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN) 589 AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN) 590 AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN) 591 AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN) 592 AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN) 593 AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN) 594 >; 595 }; 596 597 uart0_pins_default: uart0_pins_default { 598 pinctrl-single,pins = < 599 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */ 600 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */ 601 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 602 AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ 603 >; 604 }; 605 606 uart0_pins_sleep: uart0_pins_sleep { 607 pinctrl-single,pins = < 608 AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */ 609 AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */ 610 AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ 611 AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ 612 >; 613 }; 614 615 matrix_keypad_default: matrix_keypad_default { 616 pinctrl-single,pins = < 617 AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) 618 AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7) 619 AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) 620 AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) 621 >; 622 }; 623 624 matrix_keypad_sleep: matrix_keypad_sleep { 625 pinctrl-single,pins = < 626 AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7) 627 AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7) 628 AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9) 629 AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) 630 >; 631 }; 632}; 633 634&uart0 { 635 status = "okay"; 636 pinctrl-names = "default", "sleep"; 637 pinctrl-0 = <&uart0_pins_default>; 638 pinctrl-1 = <&uart0_pins_sleep>; 639}; 640 641&i2c0 { 642 status = "okay"; 643 pinctrl-names = "default"; 644 pinctrl-0 = <&i2c0_pins>; 645 clock-frequency = <100000>; 646 647 tps65218: tps65218@24 { 648 reg = <0x24>; 649 compatible = "ti,tps65218"; 650 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ 651 interrupt-controller; 652 #interrupt-cells = <2>; 653 654 dcdc1: regulator-dcdc1 { 655 regulator-name = "vdd_core"; 656 regulator-min-microvolt = <912000>; 657 regulator-max-microvolt = <1144000>; 658 regulator-boot-on; 659 regulator-always-on; 660 }; 661 662 dcdc2: regulator-dcdc2 { 663 regulator-name = "vdd_mpu"; 664 regulator-min-microvolt = <912000>; 665 regulator-max-microvolt = <1378000>; 666 regulator-boot-on; 667 regulator-always-on; 668 }; 669 670 dcdc3: regulator-dcdc3 { 671 regulator-name = "vdcdc3"; 672 regulator-boot-on; 673 regulator-always-on; 674 regulator-state-mem { 675 regulator-on-in-suspend; 676 }; 677 regulator-state-disk { 678 regulator-off-in-suspend; 679 }; 680 }; 681 682 dcdc5: regulator-dcdc5 { 683 regulator-name = "v1_0bat"; 684 regulator-min-microvolt = <1000000>; 685 regulator-max-microvolt = <1000000>; 686 regulator-boot-on; 687 regulator-always-on; 688 regulator-state-mem { 689 regulator-on-in-suspend; 690 }; 691 }; 692 693 dcdc6: regulator-dcdc6 { 694 regulator-name = "v1_8bat"; 695 regulator-min-microvolt = <1800000>; 696 regulator-max-microvolt = <1800000>; 697 regulator-boot-on; 698 regulator-always-on; 699 regulator-state-mem { 700 regulator-on-in-suspend; 701 }; 702 }; 703 704 ldo1: regulator-ldo1 { 705 regulator-min-microvolt = <1800000>; 706 regulator-max-microvolt = <1800000>; 707 regulator-boot-on; 708 regulator-always-on; 709 }; 710 }; 711 712 ov2659@30 { 713 compatible = "ovti,ov2659"; 714 reg = <0x30>; 715 716 clocks = <&refclk 0>; 717 clock-names = "xvclk"; 718 719 port { 720 ov2659_0: endpoint { 721 remote-endpoint = <&vpfe1_ep>; 722 link-frequencies = /bits/ 64 <70000000>; 723 }; 724 }; 725 }; 726}; 727 728&i2c1 { 729 status = "okay"; 730 pinctrl-names = "default"; 731 pinctrl-0 = <&i2c1_pins>; 732 pixcir_ts@5c { 733 compatible = "pixcir,pixcir_tangoc"; 734 pinctrl-names = "default"; 735 pinctrl-0 = <&pixcir_ts_pins>; 736 reg = <0x5c>; 737 738 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 739 740 /* 741 * 0x264 represents the offset of padconf register of 742 * gpio3_22 from am43xx_pinmux base. 743 */ 744 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, 745 <&am43xx_pinmux 0x264>; 746 interrupt-names = "tsc", "wakeup"; 747 748 touchscreen-size-x = <1024>; 749 touchscreen-size-y = <600>; 750 wakeup-source; 751 }; 752 753 ov2659@30 { 754 compatible = "ovti,ov2659"; 755 reg = <0x30>; 756 757 clocks = <&refclk 0>; 758 clock-names = "xvclk"; 759 760 port { 761 ov2659_1: endpoint { 762 remote-endpoint = <&vpfe0_ep>; 763 link-frequencies = /bits/ 64 <70000000>; 764 }; 765 }; 766 }; 767 768 tlv320aic3106: tlv320aic3106@1b { 769 #sound-dai-cells = <0>; 770 compatible = "ti,tlv320aic3106"; 771 reg = <0x1b>; 772 status = "okay"; 773 774 /* Regulators */ 775 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */ 776 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ 777 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ 778 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */ 779 }; 780}; 781 782&epwmss0 { 783 status = "okay"; 784}; 785 786&tscadc { 787 status = "okay"; 788 789 adc { 790 ti,adc-channels = <0 1 2 3 4 5 6 7>; 791 }; 792}; 793 794&ecap0 { 795 status = "okay"; 796 pinctrl-names = "default"; 797 pinctrl-0 = <&ecap0_pins>; 798}; 799 800&gpio0 { 801 pinctrl-names = "default"; 802 pinctrl-0 = <&gpio0_pins>; 803 status = "okay"; 804 805 p23 { 806 gpio-hog; 807 gpios = <23 GPIO_ACTIVE_HIGH>; 808 /* SelEMMCorNAND selects between eMMC and NAND: 809 * Low: NAND 810 * High: eMMC 811 * When changing this line make sure the newly 812 * selected device node is enabled and the previously 813 * selected device node is disabled. 814 */ 815 output-low; 816 line-name = "SelEMMCorNAND"; 817 }; 818}; 819 820&gpio1 { 821 status = "okay"; 822}; 823 824&gpio3 { 825 status = "okay"; 826}; 827 828&gpio4 { 829 status = "okay"; 830}; 831 832&gpio5_target { 833 ti,no-reset-on-init; 834}; 835 836&gpio5 { 837 pinctrl-names = "default"; 838 pinctrl-0 = <&display_mux_pins>; 839 status = "okay"; 840 841 p8 { 842 /* 843 * SelLCDorHDMI selects between display and audio paths: 844 * Low: HDMI display with audio via HDMI 845 * High: LCD display with analog audio via aic3111 codec 846 */ 847 gpio-hog; 848 gpios = <8 GPIO_ACTIVE_HIGH>; 849 output-high; 850 line-name = "SelLCDorHDMI"; 851 }; 852}; 853 854&mmc1 { 855 status = "okay"; 856 vmmc-supply = <&evm_v3_3d>; 857 bus-width = <4>; 858 pinctrl-names = "default"; 859 pinctrl-0 = <&mmc1_pins>; 860 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 861}; 862 863/* eMMC sits on mmc2 */ 864&mmc2 { 865 /* 866 * When enabling eMMC, disable GPMC/NAND and set 867 * SelEMMCorNAND to output-high 868 */ 869 status = "disabled"; 870 vmmc-supply = <&evm_v3_3d>; 871 bus-width = <8>; 872 pinctrl-names = "default", "sleep"; 873 pinctrl-0 = <&emmc_pins_default>; 874 pinctrl-1 = <&emmc_pins_sleep>; 875 ti,non-removable; 876}; 877 878&mmc3 { 879 status = "okay"; 880 /* these are on the crossbar and are outlined in the 881 xbar-event-map element */ 882 dmas = <&edma_xbar 30 0 1>, 883 <&edma_xbar 31 0 2>; 884 dma-names = "tx", "rx"; 885 vmmc-supply = <&vmmcwl_fixed>; 886 bus-width = <4>; 887 pinctrl-names = "default", "sleep"; 888 pinctrl-0 = <&mmc3_pins_default>; 889 pinctrl-1 = <&mmc3_pins_sleep>; 890 cap-power-off-card; 891 keep-power-in-suspend; 892 ti,non-removable; 893 894 #address-cells = <1>; 895 #size-cells = <0>; 896 wlcore: wlcore@0 { 897 compatible = "ti,wl1835"; 898 reg = <2>; 899 interrupt-parent = <&gpio1>; 900 interrupts = <23 IRQ_TYPE_EDGE_RISING>; 901 }; 902}; 903 904&uart3 { 905 status = "okay"; 906 pinctrl-names = "default"; 907 pinctrl-0 = <&uart3_pins>; 908}; 909 910&usb2_phy1 { 911 status = "okay"; 912}; 913 914&usb1 { 915 dr_mode = "otg"; 916 status = "okay"; 917}; 918 919&usb2_phy2 { 920 status = "okay"; 921}; 922 923&usb2 { 924 dr_mode = "host"; 925 status = "okay"; 926}; 927 928&mac { 929 slaves = <1>; 930 pinctrl-names = "default", "sleep"; 931 pinctrl-0 = <&cpsw_default>; 932 pinctrl-1 = <&cpsw_sleep>; 933 status = "okay"; 934}; 935 936&davinci_mdio { 937 pinctrl-names = "default", "sleep"; 938 pinctrl-0 = <&davinci_mdio_default>; 939 pinctrl-1 = <&davinci_mdio_sleep>; 940 status = "okay"; 941 942 ethphy0: ethernet-phy@0 { 943 reg = <0>; 944 }; 945}; 946 947&cpsw_emac0 { 948 phy-handle = <ðphy0>; 949 phy-mode = "rgmii"; 950}; 951 952&elm { 953 status = "okay"; 954}; 955 956&gpmc { 957 /* 958 * When enabling GPMC, disable eMMC and set 959 * SelEMMCorNAND to output-low 960 */ 961 status = "okay"; 962 pinctrl-names = "default"; 963 pinctrl-0 = <&nand_flash_x8>; 964 ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */ 965 nand@0,0 { 966 compatible = "ti,omap2-nand"; 967 reg = <0 0 4>; /* device IO registers */ 968 interrupt-parent = <&gpmc>; 969 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ 970 <1 IRQ_TYPE_NONE>; /* termcount */ 971 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ 972 ti,nand-xfer-type = "prefetch-dma"; 973 ti,nand-ecc-opt = "bch16"; 974 ti,elm-id = <&elm>; 975 nand-bus-width = <8>; 976 gpmc,device-width = <1>; 977 gpmc,sync-clk-ps = <0>; 978 gpmc,cs-on-ns = <0>; 979 gpmc,cs-rd-off-ns = <40>; 980 gpmc,cs-wr-off-ns = <40>; 981 gpmc,adv-on-ns = <0>; 982 gpmc,adv-rd-off-ns = <25>; 983 gpmc,adv-wr-off-ns = <25>; 984 gpmc,we-on-ns = <0>; 985 gpmc,we-off-ns = <20>; 986 gpmc,oe-on-ns = <3>; 987 gpmc,oe-off-ns = <30>; 988 gpmc,access-ns = <30>; 989 gpmc,rd-cycle-ns = <40>; 990 gpmc,wr-cycle-ns = <40>; 991 gpmc,bus-turnaround-ns = <0>; 992 gpmc,cycle2cycle-delay-ns = <0>; 993 gpmc,clk-activation-ns = <0>; 994 gpmc,wr-access-ns = <40>; 995 gpmc,wr-data-mux-bus-ns = <0>; 996 /* MTD partition table */ 997 /* All SPL-* partitions are sized to minimal length 998 * which can be independently programmable. For 999 * NAND flash this is equal to size of erase-block */ 1000 #address-cells = <1>; 1001 #size-cells = <1>; 1002 partition@0 { 1003 label = "NAND.SPL"; 1004 reg = <0x00000000 0x00040000>; 1005 }; 1006 partition@1 { 1007 label = "NAND.SPL.backup1"; 1008 reg = <0x00040000 0x00040000>; 1009 }; 1010 partition@2 { 1011 label = "NAND.SPL.backup2"; 1012 reg = <0x00080000 0x00040000>; 1013 }; 1014 partition@3 { 1015 label = "NAND.SPL.backup3"; 1016 reg = <0x000c0000 0x00040000>; 1017 }; 1018 partition@4 { 1019 label = "NAND.u-boot-spl-os"; 1020 reg = <0x00100000 0x00080000>; 1021 }; 1022 partition@5 { 1023 label = "NAND.u-boot"; 1024 reg = <0x00180000 0x00100000>; 1025 }; 1026 partition@6 { 1027 label = "NAND.u-boot-env"; 1028 reg = <0x00280000 0x00040000>; 1029 }; 1030 partition@7 { 1031 label = "NAND.u-boot-env.backup1"; 1032 reg = <0x002c0000 0x00040000>; 1033 }; 1034 partition@8 { 1035 label = "NAND.kernel"; 1036 reg = <0x00300000 0x00700000>; 1037 }; 1038 partition@9 { 1039 label = "NAND.file-system"; 1040 reg = <0x00a00000 0x1f600000>; 1041 }; 1042 }; 1043}; 1044 1045&dss { 1046 status = "ok"; 1047 1048 pinctrl-names = "default"; 1049 pinctrl-0 = <&dss_pins>; 1050 1051 port { 1052 dpi_out: endpoint { 1053 remote-endpoint = <&lcd_in>; 1054 data-lines = <24>; 1055 }; 1056 }; 1057}; 1058 1059&dcan0 { 1060 pinctrl-names = "default", "sleep"; 1061 pinctrl-0 = <&dcan0_default>; 1062 pinctrl-1 = <&dcan0_sleep>; 1063 status = "okay"; 1064}; 1065 1066&dcan1 { 1067 pinctrl-names = "default", "sleep"; 1068 pinctrl-0 = <&dcan1_default>; 1069 pinctrl-1 = <&dcan1_sleep>; 1070 status = "okay"; 1071}; 1072 1073&vpfe0 { 1074 status = "okay"; 1075 pinctrl-names = "default", "sleep"; 1076 pinctrl-0 = <&vpfe0_pins_default>; 1077 pinctrl-1 = <&vpfe0_pins_sleep>; 1078 1079 port { 1080 vpfe0_ep: endpoint { 1081 remote-endpoint = <&ov2659_1>; 1082 ti,am437x-vpfe-interface = <0>; 1083 bus-width = <8>; 1084 hsync-active = <0>; 1085 vsync-active = <0>; 1086 }; 1087 }; 1088}; 1089 1090&vpfe1 { 1091 status = "okay"; 1092 pinctrl-names = "default", "sleep"; 1093 pinctrl-0 = <&vpfe1_pins_default>; 1094 pinctrl-1 = <&vpfe1_pins_sleep>; 1095 1096 port { 1097 vpfe1_ep: endpoint { 1098 remote-endpoint = <&ov2659_0>; 1099 ti,am437x-vpfe-interface = <0>; 1100 bus-width = <8>; 1101 hsync-active = <0>; 1102 vsync-active = <0>; 1103 }; 1104 }; 1105}; 1106 1107&mcasp1 { 1108 #sound-dai-cells = <0>; 1109 pinctrl-names = "default", "sleep"; 1110 pinctrl-0 = <&mcasp1_pins>; 1111 pinctrl-1 = <&mcasp1_sleep_pins>; 1112 1113 status = "okay"; 1114 1115 op-mode = <0>; /* MCASP_IIS_MODE */ 1116 tdm-slots = <2>; 1117 /* 4 serializers */ 1118 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1119 0 0 1 2 1120 >; 1121 tx-num-evt = <32>; 1122 rx-num-evt = <32>; 1123}; 1124 1125&rtc { 1126 clocks = <&clk_32k_rtc>, <&clk_32768_ck>; 1127 clock-names = "ext-clk", "int-clk"; 1128 status = "okay"; 1129}; 1130 1131&cpu { 1132 cpu0-supply = <&dcdc2>; 1133}; 1134