1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the KZM-A9-GT board 4 * 5 * Copyright (C) 2012 Horms Solutions Ltd. 6 * 7 * Based on sh73a0-kzm9g.dts 8 * Copyright (C) 2012 Renesas Solutions Corp. 9 */ 10 11/dts-v1/; 12#include "sh73a0.dtsi" 13#include <dt-bindings/gpio/gpio.h> 14#include <dt-bindings/input/input.h> 15#include <dt-bindings/interrupt-controller/irq.h> 16 17/ { 18 model = "KZM-A9-GT"; 19 compatible = "renesas,kzm9g", "renesas,sh73a0"; 20 21 aliases { 22 serial0 = &scifa4; 23 }; 24 25 cpus { 26 cpu@0 { 27 cpu0-supply = <&vdd_dvfs>; 28 operating-points = < 29 /* kHz uV */ 30 1196000 1315000 31 598000 1175000 32 398667 1065000 33 >; 34 voltage-tolerance = <1>; /* 1% */ 35 }; 36 }; 37 38 chosen { 39 bootargs = "root=/dev/nfs ip=on ignore_loglevel rw"; 40 stdout-path = "serial0:115200n8"; 41 }; 42 43 memory@40000000 { 44 device_type = "memory"; 45 reg = <0x40000000 0x20000000>; 46 }; 47 48 reg_1p8v: regulator-1p8v { 49 compatible = "regulator-fixed"; 50 regulator-name = "fixed-1.8V"; 51 regulator-min-microvolt = <1800000>; 52 regulator-max-microvolt = <1800000>; 53 regulator-always-on; 54 regulator-boot-on; 55 }; 56 57 reg_3p3v: regulator-3p3v { 58 compatible = "regulator-fixed"; 59 regulator-name = "fixed-3.3V"; 60 regulator-min-microvolt = <3300000>; 61 regulator-max-microvolt = <3300000>; 62 regulator-always-on; 63 regulator-boot-on; 64 }; 65 66 vmmc_sdhi0: regulator-vmmc-sdhi0 { 67 compatible = "regulator-fixed"; 68 regulator-name = "SDHI0 Vcc"; 69 regulator-min-microvolt = <3300000>; 70 regulator-max-microvolt = <3300000>; 71 gpio = <&pfc 15 GPIO_ACTIVE_HIGH>; 72 enable-active-high; 73 }; 74 75 vmmc_sdhi2: regulator-vmmc-sdhi2 { 76 compatible = "regulator-fixed"; 77 regulator-name = "SDHI2 Vcc"; 78 regulator-min-microvolt = <3300000>; 79 regulator-max-microvolt = <3300000>; 80 gpio = <&pfc 14 GPIO_ACTIVE_HIGH>; 81 enable-active-high; 82 }; 83 84 leds { 85 compatible = "gpio-leds"; 86 led1 { 87 gpios = <&pfc 20 GPIO_ACTIVE_LOW>; 88 label = "LED1"; 89 }; 90 led2 { 91 gpios = <&pfc 21 GPIO_ACTIVE_LOW>; 92 label = "LED2"; 93 }; 94 led3 { 95 gpios = <&pfc 22 GPIO_ACTIVE_LOW>; 96 label = "LED3"; 97 }; 98 led4 { 99 gpios = <&pfc 23 GPIO_ACTIVE_LOW>; 100 label = "LED4"; 101 }; 102 }; 103 104 keyboard { 105 compatible = "gpio-keys"; 106 107 back-key { 108 gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; 109 linux,code = <KEY_BACK>; 110 label = "SW3"; 111 }; 112 113 right-key { 114 gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; 115 linux,code = <KEY_RIGHT>; 116 label = "SW2-R"; 117 }; 118 119 left-key { 120 gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; 121 linux,code = <KEY_LEFT>; 122 label = "SW2-L"; 123 }; 124 125 enter-key { 126 gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; 127 linux,code = <KEY_ENTER>; 128 label = "SW2-P"; 129 }; 130 131 up-key { 132 gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; 133 linux,code = <KEY_UP>; 134 label = "SW2-U"; 135 }; 136 137 down-key { 138 gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; 139 linux,code = <KEY_DOWN>; 140 label = "SW2-D"; 141 }; 142 143 home-key { 144 gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; 145 linux,code = <KEY_HOME>; 146 label = "SW1"; 147 wakeup-source; 148 }; 149 150 wakeup-key { 151 gpios = <&pfc 159 GPIO_ACTIVE_LOW>; 152 linux,code = <KEY_WAKEUP>; 153 label = "NMI"; 154 wakeup-source; 155 }; 156 }; 157 158 sound { 159 compatible = "simple-audio-card"; 160 simple-audio-card,format = "left_j"; 161 simple-audio-card,cpu { 162 sound-dai = <&sh_fsi2 0>; 163 }; 164 simple-audio-card,codec { 165 sound-dai = <&ak4648>; 166 bitclock-master; 167 frame-master; 168 system-clock-frequency = <11289600>; 169 }; 170 }; 171}; 172 173&bsc { 174 ethernet@10000000 { 175 compatible = "smsc,lan9220", "smsc,lan9115"; 176 reg = <0x10000000 0x100>; 177 phy-mode = "mii"; 178 interrupt-parent = <&irqpin0>; 179 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 180 reg-io-width = <4>; 181 smsc,irq-push-pull; 182 smsc,save-mac-address; 183 vddvario-supply = <®_1p8v>; 184 vdd33a-supply = <®_3p3v>; 185 }; 186}; 187 188&cmt1 { 189 status = "okay"; 190}; 191 192&extal2_clk { 193 clock-frequency = <48000000>; 194}; 195 196&i2c0 { 197 status = "okay"; 198 199 compass@c { 200 compatible = "asahi-kasei,ak8975"; 201 reg = <0x0c>; 202 interrupt-parent = <&irqpin3>; 203 interrupts = <4 IRQ_TYPE_EDGE_FALLING>; 204 }; 205 206 ak4648: codec@12 { 207 compatible = "asahi-kasei,ak4648"; 208 reg = <0x12>; 209 #sound-dai-cells = <0>; 210 }; 211 212 accelerometer@1d { 213 compatible = "adi,adxl345"; 214 reg = <0x1d>; 215 interrupt-parent = <&irqpin3>; 216 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, 217 <3 IRQ_TYPE_LEVEL_HIGH>; 218 }; 219 220 rtc@32 { 221 compatible = "ricoh,r2025sd"; 222 reg = <0x32>; 223 }; 224 225 as3711@40 { 226 compatible = "ams,as3711"; 227 reg = <0x40>; 228 229 regulators { 230 vdd_dvfs: sd1 { 231 regulator-name = "1.315V CPU"; 232 regulator-min-microvolt = <1050000>; 233 regulator-max-microvolt = <1350000>; 234 regulator-always-on; 235 regulator-boot-on; 236 }; 237 sd2 { 238 regulator-name = "1.8V"; 239 regulator-min-microvolt = <1800000>; 240 regulator-max-microvolt = <1800000>; 241 regulator-always-on; 242 regulator-boot-on; 243 }; 244 sd4 { 245 regulator-name = "1.215V"; 246 regulator-min-microvolt = <1215000>; 247 regulator-max-microvolt = <1235000>; 248 regulator-always-on; 249 regulator-boot-on; 250 }; 251 ldo2 { 252 regulator-name = "2.8V CPU"; 253 regulator-min-microvolt = <2800000>; 254 regulator-max-microvolt = <2800000>; 255 regulator-always-on; 256 regulator-boot-on; 257 }; 258 ldo3 { 259 regulator-name = "3.0V CPU"; 260 regulator-min-microvolt = <3000000>; 261 regulator-max-microvolt = <3000000>; 262 regulator-always-on; 263 regulator-boot-on; 264 }; 265 ldo4 { 266 regulator-name = "2.8V"; 267 regulator-min-microvolt = <2800000>; 268 regulator-max-microvolt = <2800000>; 269 regulator-always-on; 270 regulator-boot-on; 271 }; 272 ldo5 { 273 regulator-name = "2.8V #2"; 274 regulator-min-microvolt = <2800000>; 275 regulator-max-microvolt = <2800000>; 276 regulator-always-on; 277 regulator-boot-on; 278 }; 279 ldo7 { 280 regulator-name = "1.15V CPU"; 281 regulator-min-microvolt = <1150000>; 282 regulator-max-microvolt = <1150000>; 283 regulator-always-on; 284 regulator-boot-on; 285 }; 286 ldo8 { 287 regulator-name = "1.15V CPU #2"; 288 regulator-min-microvolt = <1150000>; 289 regulator-max-microvolt = <1150000>; 290 regulator-always-on; 291 regulator-boot-on; 292 }; 293 }; 294 }; 295}; 296 297&i2c1 { 298 status = "okay"; 299 300 touchscreen@55 { 301 compatible = "sitronix,st1232"; 302 reg = <0x55>; 303 interrupt-parent = <&irqpin1>; 304 interrupts = <0 IRQ_TYPE_EDGE_FALLING>; 305 }; 306}; 307 308&i2c3 { 309 pinctrl-0 = <&i2c3_pins>; 310 pinctrl-names = "default"; 311 status = "okay"; 312 313 pcf8575: gpio@20 { 314 compatible = "nxp,pcf8575"; 315 reg = <0x20>; 316 interrupt-parent = <&irqpin2>; 317 interrupts = <3 IRQ_TYPE_EDGE_FALLING>; 318 gpio-controller; 319 #gpio-cells = <2>; 320 interrupt-controller; 321 #interrupt-cells = <2>; 322 }; 323}; 324 325&mmcif { 326 pinctrl-0 = <&mmcif_pins>; 327 pinctrl-names = "default"; 328 329 bus-width = <8>; 330 vmmc-supply = <®_1p8v>; 331 status = "okay"; 332}; 333 334&pfc { 335 i2c3_pins: i2c3 { 336 groups = "i2c3_1"; 337 function = "i2c3"; 338 }; 339 340 mmcif_pins: mmc { 341 mux { 342 groups = "mmc0_data8_0", "mmc0_ctrl_0"; 343 function = "mmc0"; 344 }; 345 cfg { 346 groups = "mmc0_data8_0"; 347 pins = "PORT279"; 348 bias-pull-up; 349 }; 350 }; 351 352 scifa4_pins: scifa4 { 353 groups = "scifa4_data", "scifa4_ctrl"; 354 function = "scifa4"; 355 }; 356 357 sdhi0_pins: sd0 { 358 groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; 359 function = "sdhi0"; 360 }; 361 362 sdhi2_pins: sd2 { 363 groups = "sdhi2_data4", "sdhi2_ctrl"; 364 function = "sdhi2"; 365 }; 366 367 fsia_pins: sounda { 368 groups = "fsia_mclk_in", "fsia_sclk_in", 369 "fsia_data_in", "fsia_data_out"; 370 function = "fsia"; 371 }; 372}; 373 374&scifa4 { 375 pinctrl-0 = <&scifa4_pins>; 376 pinctrl-names = "default"; 377 378 uart-has-rtscts; 379 status = "okay"; 380}; 381 382&sdhi0 { 383 pinctrl-0 = <&sdhi0_pins>; 384 pinctrl-names = "default"; 385 386 vmmc-supply = <&vmmc_sdhi0>; 387 bus-width = <4>; 388 status = "okay"; 389}; 390 391&sdhi2 { 392 pinctrl-0 = <&sdhi2_pins>; 393 pinctrl-names = "default"; 394 395 vmmc-supply = <&vmmc_sdhi2>; 396 bus-width = <4>; 397 broken-cd; 398 status = "okay"; 399}; 400 401&sh_fsi2 { 402 pinctrl-0 = <&fsia_pins>; 403 pinctrl-names = "default"; 404 405 status = "okay"; 406}; 407