1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/mach-pxa/icontrol.c
4 *
5 * Support for the iControl and SafeTcam platforms from TMT Services
6 * using the Embedian MXM-8x10 Computer on Module
7 *
8 * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
9 *
10 * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
11 */
12
13 #include <linux/irq.h>
14 #include <linux/platform_device.h>
15 #include <linux/gpio.h>
16
17 #include <asm/mach-types.h>
18 #include <asm/mach/arch.h>
19
20 #include "pxa320.h"
21 #include "mxm8x10.h"
22
23 #include <linux/spi/spi.h>
24 #include <linux/spi/pxa2xx_spi.h>
25 #include <linux/can/platform/mcp251x.h>
26 #include <linux/regulator/machine.h>
27
28 #include "generic.h"
29
30 #define ICONTROL_MCP251x_nCS1 (15)
31 #define ICONTROL_MCP251x_nCS2 (16)
32 #define ICONTROL_MCP251x_nCS3 (17)
33 #define ICONTROL_MCP251x_nCS4 (24)
34
35 #define ICONTROL_MCP251x_nIRQ1 (74)
36 #define ICONTROL_MCP251x_nIRQ2 (75)
37 #define ICONTROL_MCP251x_nIRQ3 (76)
38 #define ICONTROL_MCP251x_nIRQ4 (77)
39
40 static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
41 .tx_threshold = 8,
42 .rx_threshold = 128,
43 .dma_burst_size = 8,
44 .timeout = 235,
45 .gpio_cs = ICONTROL_MCP251x_nCS1
46 };
47
48 static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
49 .tx_threshold = 8,
50 .rx_threshold = 128,
51 .dma_burst_size = 8,
52 .timeout = 235,
53 .gpio_cs = ICONTROL_MCP251x_nCS2
54 };
55
56 static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
57 .tx_threshold = 8,
58 .rx_threshold = 128,
59 .dma_burst_size = 8,
60 .timeout = 235,
61 .gpio_cs = ICONTROL_MCP251x_nCS3
62 };
63
64 static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
65 .tx_threshold = 8,
66 .rx_threshold = 128,
67 .dma_burst_size = 8,
68 .timeout = 235,
69 .gpio_cs = ICONTROL_MCP251x_nCS4
70 };
71
72 static struct mcp251x_platform_data mcp251x_info = {
73 .oscillator_frequency = 16E6,
74 };
75
76 static struct spi_board_info mcp251x_board_info[] = {
77 {
78 .modalias = "mcp2515",
79 .max_speed_hz = 6500000,
80 .bus_num = 3,
81 .chip_select = 0,
82 .platform_data = &mcp251x_info,
83 .controller_data = &mcp251x_chip_info1,
84 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
85 },
86 {
87 .modalias = "mcp2515",
88 .max_speed_hz = 6500000,
89 .bus_num = 3,
90 .chip_select = 1,
91 .platform_data = &mcp251x_info,
92 .controller_data = &mcp251x_chip_info2,
93 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
94 },
95 {
96 .modalias = "mcp2515",
97 .max_speed_hz = 6500000,
98 .bus_num = 4,
99 .chip_select = 0,
100 .platform_data = &mcp251x_info,
101 .controller_data = &mcp251x_chip_info3,
102 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
103 },
104 {
105 .modalias = "mcp2515",
106 .max_speed_hz = 6500000,
107 .bus_num = 4,
108 .chip_select = 1,
109 .platform_data = &mcp251x_info,
110 .controller_data = &mcp251x_chip_info4,
111 .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
112 }
113 };
114
115 static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
116 .num_chipselect = 2,
117 .enable_dma = 1
118 };
119
120 static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
121 .num_chipselect = 2,
122 .enable_dma = 1
123 };
124
125 struct platform_device pxa_spi_ssp3 = {
126 .name = "pxa2xx-spi",
127 .id = 3,
128 .dev = {
129 .platform_data = &pxa_ssp3_spi_master_info,
130 }
131 };
132
133 struct platform_device pxa_spi_ssp4 = {
134 .name = "pxa2xx-spi",
135 .id = 4,
136 .dev = {
137 .platform_data = &pxa_ssp4_spi_master_info,
138 }
139 };
140
141 static struct platform_device *icontrol_spi_devices[] __initdata = {
142 &pxa_spi_ssp3,
143 &pxa_spi_ssp4,
144 };
145
146 static mfp_cfg_t mfp_can_cfg[] __initdata = {
147 /* CAN CS lines */
148 GPIO15_GPIO,
149 GPIO16_GPIO,
150 GPIO17_GPIO,
151 GPIO24_GPIO,
152
153 /* SPI (SSP3) lines */
154 GPIO89_SSP3_SCLK,
155 GPIO91_SSP3_TXD,
156 GPIO92_SSP3_RXD,
157
158 /* SPI (SSP4) lines */
159 GPIO93_SSP4_SCLK,
160 GPIO95_SSP4_TXD,
161 GPIO96_SSP4_RXD,
162
163 /* CAN nIRQ lines */
164 GPIO74_GPIO | MFP_LPM_EDGE_RISE,
165 GPIO75_GPIO | MFP_LPM_EDGE_RISE,
166 GPIO76_GPIO | MFP_LPM_EDGE_RISE,
167 GPIO77_GPIO | MFP_LPM_EDGE_RISE
168 };
169
icontrol_can_init(void)170 static void __init icontrol_can_init(void)
171 {
172 pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
173 platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
174 spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
175 }
176
icontrol_init(void)177 static void __init icontrol_init(void)
178 {
179 mxm_8x10_barebones_init();
180 mxm_8x10_usb_host_init();
181 mxm_8x10_mmc_init();
182
183 icontrol_can_init();
184
185 regulator_has_full_constraints();
186 }
187
188 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
189 .atag_offset = 0x100,
190 .map_io = pxa3xx_map_io,
191 .nr_irqs = PXA_NR_IRQS,
192 .init_irq = pxa3xx_init_irq,
193 .handle_irq = pxa3xx_handle_irq,
194 .init_time = pxa_timer_init,
195 .init_machine = icontrol_init,
196 .restart = pxa_restart,
197 MACHINE_END
198