1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * linux/arch/arm/mm/proc-sa1100.S 4 * 5 * Copyright (C) 1997-2002 Russell King 6 * hacked for non-paged-MM by Hyok S. Choi, 2003. 7 * 8 * MMU functions for SA110 9 * 10 * These are the low level assembler for performing cache and TLB 11 * functions on the StrongARM-1100 and StrongARM-1110. 12 * 13 * Note that SA1100 and SA1110 share everything but their name and CPU ID. 14 * 15 * 12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl): 16 * Flush the read buffer at context switches 17 */ 18#include <linux/linkage.h> 19#include <linux/init.h> 20#include <asm/assembler.h> 21#include <asm/asm-offsets.h> 22#include <asm/hwcap.h> 23#include <mach/hardware.h> 24#include <asm/pgtable-hwdef.h> 25#include <asm/pgtable.h> 26 27#include "proc-macros.S" 28 29/* 30 * the cache line size of the I and D cache 31 */ 32#define DCACHELINESIZE 32 33 34 .section .text 35 36/* 37 * cpu_sa1100_proc_init() 38 */ 39ENTRY(cpu_sa1100_proc_init) 40 mov r0, #0 41 mcr p15, 0, r0, c15, c1, 2 @ Enable clock switching 42 mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland 43 ret lr 44 45/* 46 * cpu_sa1100_proc_fin() 47 * 48 * Prepare the CPU for reset: 49 * - Disable interrupts 50 * - Clean and turn off caches. 51 */ 52ENTRY(cpu_sa1100_proc_fin) 53 mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching 54 mrc p15, 0, r0, c1, c0, 0 @ ctrl register 55 bic r0, r0, #0x1000 @ ...i............ 56 bic r0, r0, #0x000e @ ............wca. 57 mcr p15, 0, r0, c1, c0, 0 @ disable caches 58 ret lr 59 60/* 61 * cpu_sa1100_reset(loc) 62 * 63 * Perform a soft reset of the system. Put the CPU into the 64 * same state as it would be if it had been reset, and branch 65 * to what would be the reset vector. 66 * 67 * loc: location to jump to for soft reset 68 */ 69 .align 5 70 .pushsection .idmap.text, "ax" 71ENTRY(cpu_sa1100_reset) 72 mov ip, #0 73 mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches 74 mcr p15, 0, ip, c7, c10, 4 @ drain WB 75#ifdef CONFIG_MMU 76 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 77#endif 78 mrc p15, 0, ip, c1, c0, 0 @ ctrl register 79 bic ip, ip, #0x000f @ ............wcam 80 bic ip, ip, #0x1100 @ ...i...s........ 81 mcr p15, 0, ip, c1, c0, 0 @ ctrl register 82 ret r0 83ENDPROC(cpu_sa1100_reset) 84 .popsection 85 86/* 87 * cpu_sa1100_do_idle(type) 88 * 89 * Cause the processor to idle 90 * 91 * type: call type: 92 * 0 = slow idle 93 * 1 = fast idle 94 * 2 = switch to slow processor clock 95 * 3 = switch to fast processor clock 96 */ 97 .align 5 98ENTRY(cpu_sa1100_do_idle) 99 mov r0, r0 @ 4 nop padding 100 mov r0, r0 101 mov r0, r0 102 mov r0, r0 @ 4 nop padding 103 mov r0, r0 104 mov r0, r0 105 mov r0, #0 106 ldr r1, =UNCACHEABLE_ADDR @ ptr to uncacheable address 107 @ --- aligned to a cache line 108 mcr p15, 0, r0, c15, c2, 2 @ disable clock switching 109 ldr r1, [r1, #0] @ force switch to MCLK 110 mcr p15, 0, r0, c15, c8, 2 @ wait for interrupt 111 mov r0, r0 @ safety 112 mcr p15, 0, r0, c15, c1, 2 @ enable clock switching 113 ret lr 114 115/* ================================= CACHE ================================ */ 116 117/* 118 * cpu_sa1100_dcache_clean_area(addr,sz) 119 * 120 * Clean the specified entry of any caches such that the MMU 121 * translation fetches will obtain correct data. 122 * 123 * addr: cache-unaligned virtual address 124 */ 125 .align 5 126ENTRY(cpu_sa1100_dcache_clean_area) 1271: mcr p15, 0, r0, c7, c10, 1 @ clean D entry 128 add r0, r0, #DCACHELINESIZE 129 subs r1, r1, #DCACHELINESIZE 130 bhi 1b 131 ret lr 132 133/* =============================== PageTable ============================== */ 134 135/* 136 * cpu_sa1100_switch_mm(pgd) 137 * 138 * Set the translation base pointer to be as described by pgd. 139 * 140 * pgd: new page tables 141 */ 142 .align 5 143ENTRY(cpu_sa1100_switch_mm) 144#ifdef CONFIG_MMU 145 str lr, [sp, #-4]! 146 bl v4wb_flush_kern_cache_all @ clears IP 147 mcr p15, 0, ip, c9, c0, 0 @ invalidate RB 148 mcr p15, 0, r0, c2, c0, 0 @ load page table pointer 149 mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs 150 ldr pc, [sp], #4 151#else 152 ret lr 153#endif 154 155/* 156 * cpu_sa1100_set_pte_ext(ptep, pte, ext) 157 * 158 * Set a PTE and flush it out 159 */ 160 .align 5 161ENTRY(cpu_sa1100_set_pte_ext) 162#ifdef CONFIG_MMU 163 armv3_set_pte_ext wc_disable=0 164 mov r0, r0 165 mcr p15, 0, r0, c7, c10, 1 @ clean D entry 166 mcr p15, 0, r0, c7, c10, 4 @ drain WB 167#endif 168 ret lr 169 170.globl cpu_sa1100_suspend_size 171.equ cpu_sa1100_suspend_size, 4 * 3 172#ifdef CONFIG_ARM_CPU_SUSPEND 173ENTRY(cpu_sa1100_do_suspend) 174 stmfd sp!, {r4 - r6, lr} 175 mrc p15, 0, r4, c3, c0, 0 @ domain ID 176 mrc p15, 0, r5, c13, c0, 0 @ PID 177 mrc p15, 0, r6, c1, c0, 0 @ control reg 178 stmia r0, {r4 - r6} @ store cp regs 179 ldmfd sp!, {r4 - r6, pc} 180ENDPROC(cpu_sa1100_do_suspend) 181 182ENTRY(cpu_sa1100_do_resume) 183 ldmia r0, {r4 - r6} @ load cp regs 184 mov ip, #0 185 mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs 186 mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache 187 mcr p15, 0, ip, c9, c0, 0 @ invalidate RB 188 mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB 189 190 mcr p15, 0, r4, c3, c0, 0 @ domain ID 191 mcr p15, 0, r1, c2, c0, 0 @ translation table base addr 192 mcr p15, 0, r5, c13, c0, 0 @ PID 193 mov r0, r6 @ control register 194 b cpu_resume_mmu 195ENDPROC(cpu_sa1100_do_resume) 196#endif 197 198 .type __sa1100_setup, #function 199__sa1100_setup: 200 mov r0, #0 201 mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4 202 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4 203#ifdef CONFIG_MMU 204 mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4 205#endif 206 adr r5, sa1100_crval 207 ldmia r5, {r5, r6} 208 mrc p15, 0, r0, c1, c0 @ get control register v4 209 bic r0, r0, r5 210 orr r0, r0, r6 211 ret lr 212 .size __sa1100_setup, . - __sa1100_setup 213 214 /* 215 * R 216 * .RVI ZFRS BLDP WCAM 217 * ..11 0001 ..11 1101 218 * 219 */ 220 .type sa1100_crval, #object 221sa1100_crval: 222 crval clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130 223 224 __INITDATA 225 226/* 227 * SA1100 and SA1110 share the same function calls 228 */ 229 230 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 231 define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1 232 233 .section ".rodata" 234 235 string cpu_arch_name, "armv4" 236 string cpu_elf_name, "v4" 237 string cpu_sa1100_name, "StrongARM-1100" 238 string cpu_sa1110_name, "StrongARM-1110" 239 240 .align 241 242 .section ".proc.info.init", "a" 243 244.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req 245 .type __\name\()_proc_info,#object 246__\name\()_proc_info: 247 .long \cpu_val 248 .long \cpu_mask 249 .long PMD_TYPE_SECT | \ 250 PMD_SECT_BUFFERABLE | \ 251 PMD_SECT_CACHEABLE | \ 252 PMD_SECT_AP_WRITE | \ 253 PMD_SECT_AP_READ 254 .long PMD_TYPE_SECT | \ 255 PMD_SECT_AP_WRITE | \ 256 PMD_SECT_AP_READ 257 initfn __sa1100_setup, __\name\()_proc_info 258 .long cpu_arch_name 259 .long cpu_elf_name 260 .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT 261 .long \cpu_name 262 .long sa1100_processor_functions 263 .long v4wb_tlb_fns 264 .long v4_mc_user_fns 265 .long v4wb_cache_fns 266 .size __\name\()_proc_info, . - __\name\()_proc_info 267.endm 268 269 sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name 270 sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name 271