1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Lenovo Yoga C630 4 * 5 * Copyright (c) 2019, Linaro Ltd. 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11#include "sdm845.dtsi" 12#include "pm8998.dtsi" 13 14/ { 15 model = "Lenovo Yoga C630"; 16 compatible = "lenovo,yoga-c630", "qcom,sdm845"; 17 18 aliases { 19 hsuart0 = &uart6; 20 }; 21}; 22 23&apps_rsc { 24 pm8998-rpmh-regulators { 25 compatible = "qcom,pm8998-rpmh-regulators"; 26 qcom,pmic-id = "a"; 27 28 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 29 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 30 31 vreg_s2a_1p125: smps2 { 32 }; 33 34 vreg_s3a_1p35: smps3 { 35 regulator-min-microvolt = <1352000>; 36 regulator-max-microvolt = <1352000>; 37 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 38 }; 39 40 vreg_s4a_1p8: smps4 { 41 regulator-min-microvolt = <1800000>; 42 regulator-max-microvolt = <1800000>; 43 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 44 }; 45 46 vreg_s5a_2p04: smps5 { 47 regulator-min-microvolt = <2040000>; 48 regulator-max-microvolt = <2040000>; 49 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 50 }; 51 52 vreg_s7a_1p025: smps7 { 53 }; 54 55 vdd_qusb_hs0: 56 vdda_hp_pcie_core: 57 vdda_mipi_csi0_0p9: 58 vdda_mipi_csi1_0p9: 59 vdda_mipi_csi2_0p9: 60 vdda_mipi_dsi0_pll: 61 vdda_mipi_dsi1_pll: 62 vdda_qlink_lv: 63 vdda_qlink_lv_ck: 64 vdda_qrefs_0p875: 65 vdda_pcie_core: 66 vdda_pll_cc_ebi01: 67 vdda_pll_cc_ebi23: 68 vdda_sp_sensor: 69 vdda_ufs1_core: 70 vdda_ufs2_core: 71 vdda_usb1_ss_core: 72 vdda_usb2_ss_core: 73 vreg_l1a_0p875: ldo1 { 74 regulator-min-microvolt = <880000>; 75 regulator-max-microvolt = <880000>; 76 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 77 }; 78 79 vddpx_10: 80 vreg_l2a_1p2: ldo2 { 81 regulator-min-microvolt = <1200000>; 82 regulator-max-microvolt = <1200000>; 83 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 84 regulator-always-on; 85 }; 86 87 vreg_l3a_1p0: ldo3 { 88 }; 89 90 vdd_wcss_cx: 91 vdd_wcss_mx: 92 vdda_wcss_pll: 93 vreg_l5a_0p8: ldo5 { 94 regulator-min-microvolt = <800000>; 95 regulator-max-microvolt = <800000>; 96 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 97 }; 98 99 vddpx_13: 100 vreg_l6a_1p8: ldo6 { 101 regulator-min-microvolt = <1800000>; 102 regulator-max-microvolt = <1800000>; 103 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 104 }; 105 106 vreg_l7a_1p8: ldo7 { 107 regulator-min-microvolt = <1800000>; 108 regulator-max-microvolt = <1800000>; 109 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 110 }; 111 112 vreg_l8a_1p2: ldo8 { 113 }; 114 115 vreg_l9a_1p8: ldo9 { 116 }; 117 118 vreg_l10a_1p8: ldo10 { 119 }; 120 121 vreg_l11a_1p0: ldo11 { 122 }; 123 124 vdd_qfprom: 125 vdd_qfprom_sp: 126 vdda_apc1_cs_1p8: 127 vdda_gfx_cs_1p8: 128 vdda_qrefs_1p8: 129 vdda_qusb_hs0_1p8: 130 vddpx_11: 131 vreg_l12a_1p8: ldo12 { 132 regulator-min-microvolt = <1800000>; 133 regulator-max-microvolt = <1800000>; 134 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 135 }; 136 137 vddpx_2: 138 vreg_l13a_2p95: ldo13 { 139 }; 140 141 vreg_l14a_1p88: ldo14 { 142 regulator-min-microvolt = <1880000>; 143 regulator-max-microvolt = <1880000>; 144 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 145 regulator-always-on; 146 }; 147 148 vreg_l15a_1p8: ldo15 { 149 }; 150 151 vreg_l16a_2p7: ldo16 { 152 }; 153 154 vreg_l17a_1p3: ldo17 { 155 regulator-min-microvolt = <1304000>; 156 regulator-max-microvolt = <1304000>; 157 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 158 }; 159 160 vreg_l18a_2p7: ldo18 { 161 }; 162 163 vreg_l19a_3p0: ldo19 { 164 regulator-min-microvolt = <3100000>; 165 regulator-max-microvolt = <3108000>; 166 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 167 }; 168 169 vreg_l20a_2p95: ldo20 { 170 regulator-min-microvolt = <2960000>; 171 regulator-max-microvolt = <2960000>; 172 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 173 }; 174 175 vreg_l21a_2p95: ldo21 { 176 }; 177 178 vreg_l22a_2p85: ldo22 { 179 }; 180 181 vreg_l23a_3p3: ldo23 { 182 }; 183 184 vdda_qusb_hs0_3p1: 185 vreg_l24a_3p075: ldo24 { 186 regulator-min-microvolt = <3075000>; 187 regulator-max-microvolt = <3083000>; 188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 189 }; 190 191 vreg_l25a_3p3: ldo25 { 192 regulator-min-microvolt = <3104000>; 193 regulator-max-microvolt = <3112000>; 194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 195 }; 196 197 vdda_hp_pcie_1p2: 198 vdda_hv_ebi0: 199 vdda_hv_ebi1: 200 vdda_hv_ebi2: 201 vdda_hv_ebi3: 202 vdda_mipi_csi_1p25: 203 vdda_mipi_dsi0_1p2: 204 vdda_mipi_dsi1_1p2: 205 vdda_pcie_1p2: 206 vdda_ufs1_1p2: 207 vdda_ufs2_1p2: 208 vdda_usb1_ss_1p2: 209 vdda_usb2_ss_1p2: 210 vreg_l26a_1p2: ldo26 { 211 regulator-min-microvolt = <1200000>; 212 regulator-max-microvolt = <1208000>; 213 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 214 }; 215 216 vreg_l28a_3p0: ldo28 { 217 }; 218 219 vreg_lvs1a_1p8: lvs1 { 220 }; 221 222 vreg_lvs2a_1p8: lvs2 { 223 }; 224 }; 225}; 226 227&apps_smmu { 228 /* TODO: Figure out how to survive booting with this enabled */ 229 status = "disabled"; 230}; 231 232&gcc { 233 protected-clocks = <GCC_QSPI_CORE_CLK>, 234 <GCC_QSPI_CORE_CLK_SRC>, 235 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 236 <GCC_LPASS_Q6_AXI_CLK>, 237 <GCC_LPASS_SWAY_CLK>; 238}; 239 240&i2c1 { 241 status = "okay"; 242 clock-frequency = <400000>; 243}; 244 245&i2c3 { 246 status = "okay"; 247 clock-frequency = <400000>; 248 /* Overwrite pinctrl-0 from sdm845.dtsi */ 249 pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>; 250 251 tsel: hid@15 { 252 compatible = "hid-over-i2c"; 253 reg = <0x15>; 254 hid-descr-addr = <0x1>; 255 256 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; 257 }; 258 259 tsc2: hid@2c { 260 compatible = "hid-over-i2c"; 261 reg = <0x2c>; 262 hid-descr-addr = <0x20>; 263 264 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; 265 }; 266}; 267 268&i2c5 { 269 status = "okay"; 270 clock-frequency = <400000>; 271 272 tsc1: hid@10 { 273 compatible = "hid-over-i2c"; 274 reg = <0x10>; 275 hid-descr-addr = <0x1>; 276 277 interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; 278 279 pinctrl-names = "default"; 280 pinctrl-0 = <&i2c5_hid_active>; 281 }; 282}; 283 284&i2c11 { 285 status = "okay"; 286 clock-frequency = <400000>; 287 288 ecsh: hid@5c { 289 compatible = "hid-over-i2c"; 290 reg = <0x5c>; 291 hid-descr-addr = <0x1>; 292 293 interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; 294 295 pinctrl-names = "default"; 296 pinctrl-0 = <&i2c11_hid_active>; 297 }; 298}; 299 300&qup_i2c12_default { 301 pinmux { 302 drive-strength = <2>; 303 bias-disable; 304 }; 305}; 306 307&qup_uart6_default { 308 pinmux { 309 pins = "gpio45", "gpio46", "gpio47", "gpio48"; 310 function = "qup6"; 311 }; 312 313 cts { 314 pins = "gpio45"; 315 bias-pull-down; 316 }; 317 318 rts-tx { 319 pins = "gpio46", "gpio47"; 320 drive-strength = <2>; 321 bias-disable; 322 }; 323 324 rx { 325 pins = "gpio48"; 326 bias-pull-up; 327 }; 328}; 329 330&qupv3_id_0 { 331 status = "okay"; 332}; 333 334&qupv3_id_1 { 335 status = "okay"; 336}; 337 338&tlmm { 339 gpio-reserved-ranges = <0 4>, <81 4>; 340 341 i2c3_hid_active: i2c2-hid-active { 342 pins = <37>; 343 function = "gpio"; 344 345 input-enable; 346 bias-pull-up; 347 drive-strength = <2>; 348 }; 349 350 i2c5_hid_active: i2c5-hid-active { 351 pins = <125>; 352 function = "gpio"; 353 354 input-enable; 355 bias-pull-up; 356 drive-strength = <2>; 357 }; 358 359 i2c11_hid_active: i2c11-hid-active { 360 pins = <92>; 361 function = "gpio"; 362 363 input-enable; 364 bias-pull-up; 365 drive-strength = <2>; 366 }; 367}; 368 369&uart6 { 370 status = "okay"; 371 372 bluetooth { 373 compatible = "qcom,wcn3990-bt"; 374 375 vddio-supply = <&vreg_s4a_1p8>; 376 vddxo-supply = <&vreg_l7a_1p8>; 377 vddrf-supply = <&vreg_l17a_1p3>; 378 vddch0-supply = <&vreg_l25a_3p3>; 379 max-speed = <3200000>; 380 }; 381}; 382 383&ufs_mem_hc { 384 status = "okay"; 385 386 vcc-supply = <&vreg_l20a_2p95>; 387 vcc-max-microamp = <600000>; 388}; 389 390&ufs_mem_phy { 391 status = "okay"; 392 393 vdda-phy-supply = <&vdda_ufs1_core>; 394 vdda-pll-supply = <&vdda_ufs1_1p2>; 395}; 396 397&usb_1 { 398 status = "okay"; 399}; 400 401&usb_1_dwc3 { 402 dr_mode = "host"; 403}; 404 405&usb_1_hsphy { 406 status = "okay"; 407 408 vdd-supply = <&vdda_usb1_ss_core>; 409 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 410 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 411 412 qcom,imp-res-offset-value = <8>; 413 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; 414 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; 415 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; 416}; 417 418&usb_1_qmpphy { 419 status = "okay"; 420 421 vdda-phy-supply = <&vdda_usb1_ss_1p2>; 422 vdda-pll-supply = <&vdda_usb1_ss_core>; 423}; 424 425&usb_2 { 426 status = "okay"; 427}; 428 429&usb_2_dwc3 { 430 dr_mode = "host"; 431}; 432 433&usb_2_hsphy { 434 status = "okay"; 435 436 vdd-supply = <&vdda_usb2_ss_core>; 437 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 438 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 439 440 qcom,imp-res-offset-value = <8>; 441 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; 442}; 443 444&usb_2_qmpphy { 445 status = "okay"; 446 447 vdda-phy-supply = <&vdda_usb2_ss_1p2>; 448 vdda-pll-supply = <&vdda_usb2_ss_core>; 449}; 450