Home
last modified time | relevance | path

Searched +full:0 +full:x1e (Results 1 – 25 of 25) sorted by relevance

/Documentation/devicetree/bindings/iio/magnetometer/
Dhmc5843.txt10 - reg : the I2C address of the magnetometer - typically 0x1e
20 reg = <0x1e>;
/Documentation/devicetree/bindings/net/
Dmicrel.txt12 KSZ8001: register 0x1e, bits 15..14
13 KSZ8041: register 0x1e, bits 15..14
14 KSZ8021: register 0x1f, bits 5..4
15 KSZ8031: register 0x1f, bits 5..4
16 KSZ8051: register 0x1f, bits 5..4
17 KSZ8081: register 0x1f, bits 5..4
18 KSZ8091: register 0x1f, bits 5..4
Dsnps,dwc-qos-ethernet.txt125 - #size-cells: Must be <0>.
143 interrupts = <0x0 0x1e 0x4>;
144 reg = <0x40010000 0x4000>;
153 snps,burst-map = <0x7>;
160 #address-cells = <0x1>;
161 #size-cells = <0x0>;
165 reg = <0x1>;
/Documentation/devicetree/bindings/media/xilinx/
Dxlnx,csi2rxss.yaml53 0x1e - YUV4228B
54 0x1f - YUV42210B
55 0x20 - RGB444
56 0x21 - RGB555
57 0x22 - RGB565
58 0x23 - RGB666
59 0x24 - RGB888
60 0x28 - RAW6
61 0x29 - RAW7
62 0x2a - RAW8
[all …]
/Documentation/hwmon/
Dadc128d818.rst10 Addresses scanned: I2C 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f
35 inputs can measure voltages between 0 and 2.55 volts, with a resolution
48 addresses 0x35 to 0x37. Those addresses are not scanned. You have to instantiate
Dmax31730.rst10 Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f
35 Set to 0 to enable channel, 0 to disable
Dcoretemp.rst9 CPUID: family 0x6, models
11 - 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
12 - 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
13 - 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
14 - 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
15 - 0x36 (Cedar Trail Atom)
37 1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
/Documentation/devicetree/bindings/iio/imu/
Dnxp,fxos8700.yaml53 #size-cells = <0>;
57 reg = <0x1e>;
69 #size-cells = <0>;
71 fxos8700@0 {
73 reg = <0>;
/Documentation/devicetree/bindings/sound/
Dnau8824.txt8 - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
11 - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
14 0 - Open
20 0 - VDDA
38 0 - VDDA
48 0 - 500 ns
54 0 - 2 us
60 0 - 30 ms
65 0 - 0 ms
74 reg = <0x1a>;
[all …]
Dnau8825.txt8 - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
15 - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
18 0 - Open
24 0 - VDDA
42 0 - VDDA
52 0 - 500 ns
58 0 - 2 us
64 0 - 30 ms
69 - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
70 - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
[all …]
/Documentation/devicetree/bindings/pci/
Dxgene-pci-msi.txt8 - reg: physical base address (0x79000000) and length (0x900000) for controller
13 interrupt number 0x10 to 0x1f.
27 reg = <0x00 0x79000000 0x0 0x900000>;
28 interrupts = <0x0 0x10 0x4>
29 <0x0 0x11 0x4>
30 <0x0 0x12 0x4>
31 <0x0 0x13 0x4>
32 <0x0 0x14 0x4>
33 <0x0 0x15 0x4>
34 <0x0 0x16 0x4>
[all …]
/Documentation/devicetree/bindings/power/
Dwakeup-source.txt37 reg = <0x10000 0x1000>;
38 interrupts = <0 19 4>, <0 21 4>, <0 22 4>;
47 reg = <0x1e>;
48 interrupts = <6 0>;
51 pinctrl-0 = <&ec_irq>;
60 #size-cells = <0>;
67 gpios = <&iofpga_gpio0 0 0x4>;
/Documentation/devicetree/bindings/spi/
Dspi-orion.txt19 chip-select lines 0 through 7 respectively.
37 #size-cells = <0>;
38 cell-index = <0>;
39 reg = <0x10600 0x28>;
47 #size-cells = <0>;
48 cell-index = <0>;
49 reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
50 <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
51 <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
52 <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
[all …]
/Documentation/firmware-guide/acpi/
Dvideo_extension.rst46 Method (_BCL, 0, NotSerialized)
48 Return (Package (0x0C)
50 0x64,
51 0x32,
52 0x0A,
53 0x14,
54 0x1E,
55 0x28,
56 0x32,
57 0x3C,
[all …]
/Documentation/devicetree/bindings/mfd/
Dgoogle,cros-ec.yaml44 - default: 0
45 - minimum: 0
52 - default: 0
53 - minimum: 0
86 const: 0
118 "^i2c-tunnel[0-9]*$":
122 "^regulator@[0-9]+$":
126 "^extcon[0-9]*$":
156 #size-cells = <0>;
160 reg = <0x1e>;
[all …]
Dab8500.txt10 - bits[3:0] trigger type and level flags:
33 …M : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
34 …IGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
102 interrupts = <0 40 0x4>;
108 interrupts = <17 0x4
109 18 0x4>;
115 interrupts = <32 0x4
116 39 0x4>;
120 #size-cells = <0>;
125 reg = <0x01>;
[all …]
/Documentation/filesystems/ext4/
Dgroup_descr.rst53 * - 0x0
57 * - 0x4
61 * - 0x8
65 * - 0xC
69 * - 0xE
73 * - 0x10
77 * - 0x12
81 * - 0x14
85 * - 0x18
89 * - 0x1A
[all …]
Ddirectory.rst27 directory entries are signified by inode = 0. By default the filesystem
44 * - 0x0
48 * - 0x4
52 * - 0x6
56 * - 0x8
76 * - 0x0
80 * - 0x4
84 * - 0x6
88 * - 0x7
92 * - 0x8
[all …]
/Documentation/fault-injection/
Dnvme-fault-injection.rst33 name fault_inject, interval 1, probability 100, space 0, times 1
34 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
39 dump_stack+0x5c/0x7d
40 should_fail+0x148/0x170
41 nvme_should_fail+0x2f/0x50 [nvme_core]
42 nvme_process_cq+0xe7/0x1d0 [nvme]
43 nvme_irq+0x1e/0x40 [nvme]
44 __handle_irq_event_percpu+0x3a/0x190
45 handle_irq_event_percpu+0x30/0x70
46 handle_irq_event+0x36/0x60
[all …]
/Documentation/virt/kvm/devices/
Dvcpu.rst83 #define KVM_PMU_EVENT_ALLOW 0
95 architecture (10 bits on ARMv8.0, 16 bits from ARMv8.1 onwards).
99 filter for event range [0:10) as the first filter and then applying a DENY
102 Restrictions: Event 0 (SW_INCR) is never filtered, as it doesn't count a
103 hardware event. Filtering event 0x1E (CHAIN) has no effect either, as it
105 using event 0x11 (CPU_CYCLES).
/Documentation/sound/hd-audio/
Dmodels.rst59 Disable HP EAPD on NID 0x15
61 Enable SPDIF output on NID 0x1e
308 Bass speaker fixup on pin 0x16
310 Bass speaker fixup on pin 0x1a
328 Fix invalid 0x15 / 0x16 pins
351 Enable audio CD pin NID 0x1c
353 Disable front HP pin NID 0x1b
520 Enable headphone mic NID 0x18 without detection
675 Fixes with volume-knob widget 0x24
748 Pin fixup for HP Envy bass speaker (NID 0x0f)
[all …]
/Documentation/sparc/oradax/
Ddax-hv-api.txt79 Only version 0 CCBs are available.
108 … Version 0 and 1 CCBs are available. Only version 0 CCBs may use Huffman encoded data, whereas only
115 …node indicates N interrupts available, the guest may use any value from 0 to N - 1 (inclusive) in …
140 [31:28] CCB version. For API version 2.0: set to 1 if CCB uses OZIP encoding; set to 0 if the…
141 uses Huffman encoding; otherwise either 0 or 1. For API version 1.0: always set to 0.
148 0x00 No Operation (No-op) or Sync
149 0x01 Extract
150 0x02 Scan Value
151 0x12 Inverted Scan Value
152 0x03 Scan Range
[all …]
/Documentation/driver-api/media/drivers/
Dcx2341x-devel.rst23 ivtvctl -O min=0x02000000,max=0x020000ff
32 (Base Address Register 0). The addresses here are offsets relative to the
37 0x00000000-0x00ffffff Encoder memory space
38 0x00000000-0x0003ffff Encode.rom
44 0x01000000-0x01ffffff Decoder memory space
45 0x01000000-0x0103ffff Decode.rom
47 0x0114b000-0x0115afff Audio.rom (deprecated?)
49 0x02000000-0x0200ffff Register Space
54 The registers occupy the 64k space starting at the 0x02000000 offset from BAR0.
59 DMA Registers 0x000-0xff:
[all …]
/Documentation/trace/
Dhistogram.rst216 field:unsigned short common_type; offset:0; size:2; signed:0;
217 field:unsigned char common_flags; offset:2; size:1; signed:0;
218 field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
221 field:unsigned long call_site; offset:8; size:8; signed:0;
222 field:const void * ptr; offset:16; size:8; signed:0;
223 field:size_t bytes_req; offset:24; size:8; signed:0;
224 field:size_t bytes_alloc; offset:32; size:8; signed:0;
225 field:gfp_t gfp_flags; offset:40; size:4; signed:0;
278 Dropped: 0
295 allowed for the table (normally 0, but if not a hint that you may
[all …]
Dftrace.rst56 tracefs /sys/kernel/tracing tracefs defaults 0 0
114 ring buffer is enabled. Echo 0 into this file to disable
121 set this file to "0". User space can re-enable tracing by
164 or cleared by writing a "1" or "0" respectively into the
183 Only active when the file contains a number greater than 0.
412 If the option "record-cmd" is set to "0", then comms of tasks
546 if (trace_fd < 0)
897 # irqsoff latency trace v1.1.5 on 3.8.0-test+
899 # latency: 259 us, #4/4, CPU#2 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
901 # | task: ps-6143 (uid:0 nice:0 policy:0 rt_prio:0)
[all …]