1Kernel driver max31790 2====================== 3 4Supported chips: 5 6 * Maxim MAX31730 7 8 Prefix: 'max31730' 9 10 Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f 11 12 Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31730.pdf 13 14Author: Guenter Roeck <linux@roeck-us.net> 15 16 17Description 18----------- 19 20This driver implements support for Maxim MAX31730. 21 22The MAX31730 temperature sensor monitors its own temperature and the 23temperatures of three external diode-connected transistors. The operating 24supply voltage is from 3.0V to 3.6V. Resistance cancellation compensates 25for high series resistance in circuit-board traces and the external thermal 26diode, while beta compensation corrects for temperature-measurement 27errors due to low-beta sensing transistors. 28 29 30Sysfs entries 31------------- 32 33=================== == ======================================================= 34temp[1-4]_enable RW Temperature enable/disable 35 Set to 0 to enable channel, 0 to disable 36temp[1-4]_input RO Temperature input 37temp[2-4]_fault RO Fault indicator for remote channels 38temp[1-4]_max RW Maximum temperature 39temp[1-4]_max_alarm RW Maximum temperature alarm 40temp[1-4]_min RW Minimum temperature. Common for all channels. 41 Only temp1_min is writeable. 42temp[1-4]_min_alarm RO Minimum temperature alarm 43temp[2-4]_offset RW Temperature offset for remote channels 44=================== == ======================================================= 45