1=================================== 2Simtec Electronics EB2410ITX (BAST) 3=================================== 4 5 http://www.simtec.co.uk/products/EB2410ITX/ 6 7Introduction 8------------ 9 10 The EB2410ITX is a S3C2410 based development board with a variety of 11 peripherals and expansion connectors. This board is also known by 12 the shortened name of Bast. 13 14 15Configuration 16------------- 17 18 To set the default configuration, use `make bast_defconfig` which 19 supports the commonly used features of this board. 20 21 22Support 23------- 24 25 Official support information can be found on the Simtec Electronics 26 website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ 27 28 Useful links: 29 30 - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html 31 32 - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html 33 34 - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html 35 and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html 36 37 38MTD 39--- 40 41 The NAND and NOR support has been merged from the linux-mtd project. 42 Any problems, see http://www.linux-mtd.infradead.org/ for more 43 information or up-to-date versions of linux-mtd. 44 45 46IDE 47--- 48 49 Both onboard IDE ports are supported, however there is no support for 50 changing speed of devices, PIO Mode 4 capable drives should be used. 51 52 53Maintainers 54----------- 55 56 This board is maintained by Simtec Electronics. 57 58 59Copyright 2004 Ben Dooks, Simtec Electronics 60