1// SPDX-License-Identifier: GPL-2.0 2/* 3 * SoC core Device Tree for the ARM Integrator platforms 4 */ 5 6/ { 7 #address-cells = <1>; 8 #size-cells = <1>; 9 10 memory { 11 device_type = "memory"; 12 reg = <0x0 0x0>; 13 }; 14 15 core-module@10000000 { 16 compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; 17 reg = <0x10000000 0x200>; 18 19 /* Use core module LED to indicate CPU load */ 20 led@c.0 { 21 compatible = "register-bit-led"; 22 offset = <0x0c>; 23 mask = <0x01>; 24 label = "integrator:core_module"; 25 linux,default-trigger = "cpu0"; 26 default-state = "on"; 27 }; 28 }; 29 30 ebi@12000000 { 31 compatible = "arm,external-bus-interface"; 32 reg = <0x12000000 0x100>; 33 }; 34 35 timer@13000000 { 36 reg = <0x13000000 0x100>; 37 interrupt-parent = <&pic>; 38 interrupts = <5>; 39 }; 40 41 timer@13000100 { 42 reg = <0x13000100 0x100>; 43 interrupt-parent = <&pic>; 44 interrupts = <6>; 45 }; 46 47 timer@13000200 { 48 reg = <0x13000200 0x100>; 49 interrupt-parent = <&pic>; 50 interrupts = <7>; 51 }; 52 53 pic@14000000 { 54 compatible = "arm,versatile-fpga-irq"; 55 #interrupt-cells = <1>; 56 interrupt-controller; 57 reg = <0x14000000 0x100>; 58 clear-mask = <0xffffffff>; 59 }; 60 61 flash@24000000 { 62 compatible = "arm,versatile-flash", "cfi-flash"; 63 reg = <0x24000000 0x02000000>; 64 bank-width = <4>; 65 partitions { 66 compatible = "arm,arm-firmware-suite"; 67 }; 68 }; 69 70 fpga { 71 compatible = "simple-bus"; 72 #address-cells = <1>; 73 #size-cells = <1>; 74 ranges; 75 interrupt-parent = <&pic>; 76 77 /* 78 * These PrimeCells are in the same locations and using the 79 * same interrupts in all Integrators, however the silicon 80 * version deployed is different. 81 */ 82 rtc@15000000 { 83 reg = <0x15000000 0x1000>; 84 interrupts = <8>; 85 }; 86 87 uart@16000000 { 88 reg = <0x16000000 0x1000>; 89 interrupts = <1>; 90 }; 91 92 uart@17000000 { 93 reg = <0x17000000 0x1000>; 94 interrupts = <2>; 95 }; 96 97 kmi@18000000 { 98 reg = <0x18000000 0x1000>; 99 interrupts = <3>; 100 }; 101 102 kmi@19000000 { 103 reg = <0x19000000 0x1000>; 104 interrupts = <4>; 105 }; 106 107 syscon { 108 /* Debug registers mapped as syscon */ 109 compatible = "syscon", "simple-mfd"; 110 reg = <0x1a000000 0x10>; 111 112 led@4.0 { 113 compatible = "register-bit-led"; 114 offset = <0x04>; 115 mask = <0x01>; 116 label = "integrator:green0"; 117 linux,default-trigger = "heartbeat"; 118 default-state = "on"; 119 }; 120 led@4.1 { 121 compatible = "register-bit-led"; 122 offset = <0x04>; 123 mask = <0x02>; 124 label = "integrator:yellow"; 125 default-state = "off"; 126 }; 127 led@4.2 { 128 compatible = "register-bit-led"; 129 offset = <0x04>; 130 mask = <0x04>; 131 label = "integrator:red"; 132 default-state = "off"; 133 }; 134 led@4.3 { 135 compatible = "register-bit-led"; 136 offset = <0x04>; 137 mask = <0x08>; 138 label = "integrator:green1"; 139 default-state = "off"; 140 }; 141 }; 142 }; 143}; 144