1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/hil/hilkbd.c
4 *
5 * Copyright (C) 1998 Philip Blundell <philb@gnu.org>
6 * Copyright (C) 1999 Matthew Wilcox <willy@infradead.org>
7 * Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
8 *
9 * Very basic HP Human Interface Loop (HIL) driver.
10 * This driver handles the keyboard on HP300 (m68k) and on some
11 * HP700 (parisc) series machines.
12 */
13
14 #include <linux/pci_ids.h>
15 #include <linux/ioport.h>
16 #include <linux/module.h>
17 #include <linux/errno.h>
18 #include <linux/input.h>
19 #include <linux/init.h>
20 #include <linux/interrupt.h>
21 #include <linux/hil.h>
22 #include <linux/io.h>
23 #include <linux/sched.h>
24 #include <linux/spinlock.h>
25 #include <asm/irq.h>
26 #ifdef CONFIG_HP300
27 #include <asm/hwtest.h>
28 #endif
29
30
31 MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
32 MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
33 MODULE_LICENSE("GPL v2");
34
35
36 #if defined(CONFIG_PARISC)
37
38 #include <asm/io.h>
39 #include <asm/hardware.h>
40 #include <asm/parisc-device.h>
41 static unsigned long hil_base; /* HPA for the HIL device */
42 static unsigned int hil_irq;
43 #define HILBASE hil_base /* HPPA (parisc) port address */
44 #define HIL_DATA 0x800
45 #define HIL_CMD 0x801
46 #define HIL_IRQ hil_irq
47 #define hil_readb(p) gsc_readb(p)
48 #define hil_writeb(v,p) gsc_writeb((v),(p))
49
50 #elif defined(CONFIG_HP300)
51
52 #define HILBASE 0xf0428000UL /* HP300 (m68k) port address */
53 #define HIL_DATA 0x1
54 #define HIL_CMD 0x3
55 #define HIL_IRQ 2
56 #define hil_readb(p) readb((const volatile void __iomem *)(p))
57 #define hil_writeb(v, p) writeb((v), (volatile void __iomem *)(p))
58
59 #else
60 #error "HIL is not supported on this platform"
61 #endif
62
63
64
65 /* HIL helper functions */
66
67 #define hil_busy() (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)
68 #define hil_data_available() (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)
69 #define hil_status() (hil_readb(HILBASE + HIL_CMD))
70 #define hil_command(x) do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)
71 #define hil_read_data() (hil_readb(HILBASE + HIL_DATA))
72 #define hil_write_data(x) do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)
73
74 /* HIL constants */
75
76 #define HIL_BUSY 0x02
77 #define HIL_DATA_RDY 0x01
78
79 #define HIL_SETARD 0xA0 /* set auto-repeat delay */
80 #define HIL_SETARR 0xA2 /* set auto-repeat rate */
81 #define HIL_SETTONE 0xA3 /* set tone generator */
82 #define HIL_CNMT 0xB2 /* clear nmi */
83 #define HIL_INTON 0x5C /* Turn on interrupts. */
84 #define HIL_INTOFF 0x5D /* Turn off interrupts. */
85
86 #define HIL_READKBDSADR 0xF9
87 #define HIL_WRITEKBDSADR 0xE9
88
89 static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
90 { HIL_KEYCODES_SET1 };
91
92 /* HIL structure */
93 static struct {
94 struct input_dev *dev;
95
96 unsigned int curdev;
97
98 unsigned char s;
99 unsigned char c;
100 int valid;
101
102 unsigned char data[16];
103 unsigned int ptr;
104 spinlock_t lock;
105
106 void *dev_id; /* native bus device */
107 } hil_dev;
108
109
poll_finished(void)110 static void poll_finished(void)
111 {
112 int down;
113 int key;
114 unsigned char scode;
115
116 switch (hil_dev.data[0]) {
117 case 0x40:
118 down = (hil_dev.data[1] & 1) == 0;
119 scode = hil_dev.data[1] >> 1;
120 key = hphilkeyb_keycode[scode];
121 input_report_key(hil_dev.dev, key, down);
122 break;
123 }
124 hil_dev.curdev = 0;
125 }
126
127
handle_status(unsigned char s,unsigned char c)128 static inline void handle_status(unsigned char s, unsigned char c)
129 {
130 if (c & 0x8) {
131 /* End of block */
132 if (c & 0x10)
133 poll_finished();
134 } else {
135 if (c & 0x10) {
136 if (hil_dev.curdev)
137 poll_finished(); /* just in case */
138 hil_dev.curdev = c & 7;
139 hil_dev.ptr = 0;
140 }
141 }
142 }
143
144
handle_data(unsigned char s,unsigned char c)145 static inline void handle_data(unsigned char s, unsigned char c)
146 {
147 if (hil_dev.curdev) {
148 hil_dev.data[hil_dev.ptr++] = c;
149 hil_dev.ptr &= 15;
150 }
151 }
152
153
154 /* handle HIL interrupts */
hil_interrupt(int irq,void * handle)155 static irqreturn_t hil_interrupt(int irq, void *handle)
156 {
157 unsigned char s, c;
158
159 s = hil_status();
160 c = hil_read_data();
161
162 switch (s >> 4) {
163 case 0x5:
164 handle_status(s, c);
165 break;
166 case 0x6:
167 handle_data(s, c);
168 break;
169 case 0x4:
170 hil_dev.s = s;
171 hil_dev.c = c;
172 mb();
173 hil_dev.valid = 1;
174 break;
175 }
176 return IRQ_HANDLED;
177 }
178
179
180 /* send a command to the HIL */
hil_do(unsigned char cmd,unsigned char * data,unsigned int len)181 static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
182 {
183 unsigned long flags;
184
185 spin_lock_irqsave(&hil_dev.lock, flags);
186 while (hil_busy())
187 /* wait */;
188 hil_command(cmd);
189 while (len--) {
190 while (hil_busy())
191 /* wait */;
192 hil_write_data(*(data++));
193 }
194 spin_unlock_irqrestore(&hil_dev.lock, flags);
195 }
196
197
198 /* initialize HIL */
hil_keyb_init(void)199 static int hil_keyb_init(void)
200 {
201 unsigned char c;
202 unsigned int i, kbid;
203 wait_queue_head_t hil_wait;
204 int err;
205
206 if (hil_dev.dev)
207 return -ENODEV; /* already initialized */
208
209 init_waitqueue_head(&hil_wait);
210 spin_lock_init(&hil_dev.lock);
211
212 hil_dev.dev = input_allocate_device();
213 if (!hil_dev.dev)
214 return -ENOMEM;
215
216 err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
217 if (err) {
218 printk(KERN_ERR "HIL: Can't get IRQ\n");
219 goto err1;
220 }
221
222 /* Turn on interrupts */
223 hil_do(HIL_INTON, NULL, 0);
224
225 /* Look for keyboards */
226 hil_dev.valid = 0; /* clear any pending data */
227 hil_do(HIL_READKBDSADR, NULL, 0);
228
229 wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
230 if (!hil_dev.valid)
231 printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
232
233 c = hil_dev.c;
234 hil_dev.valid = 0;
235 if (c == 0) {
236 kbid = -1;
237 printk(KERN_WARNING "HIL: no keyboard present\n");
238 } else {
239 kbid = ffz(~c);
240 printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
241 }
242
243 /* set it to raw mode */
244 c = 0;
245 hil_do(HIL_WRITEKBDSADR, &c, 1);
246
247 for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
248 if (hphilkeyb_keycode[i] != KEY_RESERVED)
249 __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
250
251 hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
252 hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
253 BIT_MASK(LED_SCROLLL);
254 hil_dev.dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE;
255 hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
256 hil_dev.dev->keycode = hphilkeyb_keycode;
257 hil_dev.dev->name = "HIL keyboard";
258 hil_dev.dev->phys = "hpkbd/input0";
259
260 hil_dev.dev->id.bustype = BUS_HIL;
261 hil_dev.dev->id.vendor = PCI_VENDOR_ID_HP;
262 hil_dev.dev->id.product = 0x0001;
263 hil_dev.dev->id.version = 0x0010;
264
265 err = input_register_device(hil_dev.dev);
266 if (err) {
267 printk(KERN_ERR "HIL: Can't register device\n");
268 goto err2;
269 }
270
271 printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
272 hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
273
274 return 0;
275
276 err2:
277 hil_do(HIL_INTOFF, NULL, 0);
278 free_irq(HIL_IRQ, hil_dev.dev_id);
279 err1:
280 input_free_device(hil_dev.dev);
281 hil_dev.dev = NULL;
282 return err;
283 }
284
hil_keyb_exit(void)285 static void hil_keyb_exit(void)
286 {
287 if (HIL_IRQ)
288 free_irq(HIL_IRQ, hil_dev.dev_id);
289
290 /* Turn off interrupts */
291 hil_do(HIL_INTOFF, NULL, 0);
292
293 input_unregister_device(hil_dev.dev);
294 hil_dev.dev = NULL;
295 }
296
297 #if defined(CONFIG_PARISC)
hil_probe_chip(struct parisc_device * dev)298 static int __init hil_probe_chip(struct parisc_device *dev)
299 {
300 /* Only allow one HIL keyboard */
301 if (hil_dev.dev)
302 return -ENODEV;
303
304 if (!dev->irq) {
305 printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
306 (void *)dev->hpa.start);
307 return -ENODEV;
308 }
309
310 hil_base = dev->hpa.start;
311 hil_irq = dev->irq;
312 hil_dev.dev_id = dev;
313
314 printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
315
316 return hil_keyb_init();
317 }
318
hil_remove_chip(struct parisc_device * dev)319 static int __exit hil_remove_chip(struct parisc_device *dev)
320 {
321 hil_keyb_exit();
322
323 return 0;
324 }
325
326 static const struct parisc_device_id hil_tbl[] __initconst = {
327 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
328 { 0, }
329 };
330
331 #if 0
332 /* Disabled to avoid conflicts with the HP SDC HIL drivers */
333 MODULE_DEVICE_TABLE(parisc, hil_tbl);
334 #endif
335
336 static struct parisc_driver hil_driver __refdata = {
337 .name = "hil",
338 .id_table = hil_tbl,
339 .probe = hil_probe_chip,
340 .remove = __exit_p(hil_remove_chip),
341 };
342
hil_init(void)343 static int __init hil_init(void)
344 {
345 return register_parisc_driver(&hil_driver);
346 }
347
hil_exit(void)348 static void __exit hil_exit(void)
349 {
350 unregister_parisc_driver(&hil_driver);
351 }
352
353 #else /* !CONFIG_PARISC */
354
hil_init(void)355 static int __init hil_init(void)
356 {
357 int error;
358
359 /* Only allow one HIL keyboard */
360 if (hil_dev.dev)
361 return -EBUSY;
362
363 if (!MACH_IS_HP300)
364 return -ENODEV;
365
366 if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
367 printk(KERN_ERR "HIL: hardware register was not found\n");
368 return -ENODEV;
369 }
370
371 if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
372 printk(KERN_ERR "HIL: IOPORT region already used\n");
373 return -EIO;
374 }
375
376 error = hil_keyb_init();
377 if (error) {
378 release_region(HILBASE + HIL_DATA, 2);
379 return error;
380 }
381
382 return 0;
383 }
384
hil_exit(void)385 static void __exit hil_exit(void)
386 {
387 hil_keyb_exit();
388 release_region(HILBASE + HIL_DATA, 2);
389 }
390
391 #endif /* CONFIG_PARISC */
392
393 module_init(hil_init);
394 module_exit(hil_exit);
395