1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * I2C access for DA9052 PMICs.
4 *
5 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 *
7 * Author: David Dajun Chen <dchen@diasemi.com>
8 */
9
10 #include <linux/device.h>
11 #include <linux/module.h>
12 #include <linux/input.h>
13 #include <linux/mfd/core.h>
14 #include <linux/i2c.h>
15 #include <linux/err.h>
16
17 #include <linux/mfd/da9052/da9052.h>
18 #include <linux/mfd/da9052/reg.h>
19
20 #ifdef CONFIG_OF
21 #include <linux/of.h>
22 #include <linux/of_device.h>
23 #endif
24
25 /* I2C safe register check */
i2c_safe_reg(unsigned char reg)26 static inline bool i2c_safe_reg(unsigned char reg)
27 {
28 switch (reg) {
29 case DA9052_STATUS_A_REG:
30 case DA9052_STATUS_B_REG:
31 case DA9052_STATUS_C_REG:
32 case DA9052_STATUS_D_REG:
33 case DA9052_ADC_RES_L_REG:
34 case DA9052_ADC_RES_H_REG:
35 case DA9052_VDD_RES_REG:
36 case DA9052_ICHG_AV_REG:
37 case DA9052_TBAT_RES_REG:
38 case DA9052_ADCIN4_RES_REG:
39 case DA9052_ADCIN5_RES_REG:
40 case DA9052_ADCIN6_RES_REG:
41 case DA9052_TJUNC_RES_REG:
42 case DA9052_TSI_X_MSB_REG:
43 case DA9052_TSI_Y_MSB_REG:
44 case DA9052_TSI_LSB_REG:
45 case DA9052_TSI_Z_MSB_REG:
46 return true;
47 default:
48 return false;
49 }
50 }
51
52 /*
53 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
54 * gets lockup up or fails to respond following a system reset.
55 * This fix is to follow any read or write with a dummy read to a safe
56 * register.
57 */
da9052_i2c_fix(struct da9052 * da9052,unsigned char reg)58 static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
59 {
60 int val;
61
62 switch (da9052->chip_id) {
63 case DA9052:
64 case DA9053_AA:
65 case DA9053_BA:
66 case DA9053_BB:
67 /* A dummy read to a safe register address. */
68 if (!i2c_safe_reg(reg))
69 return regmap_read(da9052->regmap,
70 DA9052_PARK_REGISTER,
71 &val);
72 break;
73 case DA9053_BC:
74 default:
75 /*
76 * For other chips parking of I2C register
77 * to a safe place is not required.
78 */
79 break;
80 }
81
82 return 0;
83 }
84
85 /*
86 * According to errata item 24, multiwrite mode should be avoided
87 * in order to prevent register data corruption after power-down.
88 */
da9052_i2c_disable_multiwrite(struct da9052 * da9052)89 static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
90 {
91 int reg_val, ret;
92
93 ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, ®_val);
94 if (ret < 0)
95 return ret;
96
97 if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
98 reg_val |= DA9052_CONTROL_B_WRITEMODE;
99 ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
100 reg_val);
101 if (ret < 0)
102 return ret;
103 }
104
105 return 0;
106 }
107
108 static const struct i2c_device_id da9052_i2c_id[] = {
109 {"da9052", DA9052},
110 {"da9053-aa", DA9053_AA},
111 {"da9053-ba", DA9053_BA},
112 {"da9053-bb", DA9053_BB},
113 {"da9053-bc", DA9053_BC},
114 {}
115 };
116 MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
117
118 #ifdef CONFIG_OF
119 static const struct of_device_id dialog_dt_ids[] = {
120 { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
121 { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
122 { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
123 { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
124 { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
125 { /* sentinel */ }
126 };
127 #endif
128
da9052_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)129 static int da9052_i2c_probe(struct i2c_client *client,
130 const struct i2c_device_id *id)
131 {
132 struct da9052 *da9052;
133 int ret;
134
135 da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
136 if (!da9052)
137 return -ENOMEM;
138
139 da9052->dev = &client->dev;
140 da9052->chip_irq = client->irq;
141 da9052->fix_io = da9052_i2c_fix;
142
143 i2c_set_clientdata(client, da9052);
144
145 da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
146 if (IS_ERR(da9052->regmap)) {
147 ret = PTR_ERR(da9052->regmap);
148 dev_err(&client->dev, "Failed to allocate register map: %d\n",
149 ret);
150 return ret;
151 }
152
153 ret = da9052_i2c_disable_multiwrite(da9052);
154 if (ret < 0)
155 return ret;
156
157 #ifdef CONFIG_OF
158 if (!id) {
159 struct device_node *np = client->dev.of_node;
160 const struct of_device_id *deviceid;
161
162 deviceid = of_match_node(dialog_dt_ids, np);
163 id = deviceid->data;
164 }
165 #endif
166
167 if (!id) {
168 ret = -ENODEV;
169 dev_err(&client->dev, "id is null.\n");
170 return ret;
171 }
172
173 return da9052_device_init(da9052, id->driver_data);
174 }
175
da9052_i2c_remove(struct i2c_client * client)176 static int da9052_i2c_remove(struct i2c_client *client)
177 {
178 struct da9052 *da9052 = i2c_get_clientdata(client);
179
180 da9052_device_exit(da9052);
181 return 0;
182 }
183
184 static struct i2c_driver da9052_i2c_driver = {
185 .probe = da9052_i2c_probe,
186 .remove = da9052_i2c_remove,
187 .id_table = da9052_i2c_id,
188 .driver = {
189 .name = "da9052",
190 #ifdef CONFIG_OF
191 .of_match_table = dialog_dt_ids,
192 #endif
193 },
194 };
195
da9052_i2c_init(void)196 static int __init da9052_i2c_init(void)
197 {
198 int ret;
199
200 ret = i2c_add_driver(&da9052_i2c_driver);
201 if (ret != 0) {
202 pr_err("DA9052 I2C registration failed %d\n", ret);
203 return ret;
204 }
205
206 return 0;
207 }
208 subsys_initcall(da9052_i2c_init);
209
da9052_i2c_exit(void)210 static void __exit da9052_i2c_exit(void)
211 {
212 i2c_del_driver(&da9052_i2c_driver);
213 }
214 module_exit(da9052_i2c_exit);
215
216 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
217 MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
218 MODULE_LICENSE("GPL");
219