1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * drivers/regulator/ab3100.c
4 *
5 * Copyright (C) 2008-2009 ST-Ericsson AB
6 * Low-level control of the AB3100 IC Low Dropout (LDO)
7 * regulators, external regulator and buck converter
8 * Author: Mattias Wallin <mattias.wallin@stericsson.com>
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 */
11
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/err.h>
16 #include <linux/platform_device.h>
17 #include <linux/regulator/driver.h>
18 #include <linux/mfd/ab3100.h>
19 #include <linux/mfd/abx500.h>
20 #include <linux/of.h>
21 #include <linux/regulator/of_regulator.h>
22
23 /* LDO registers and some handy masking definitions for AB3100 */
24 #define AB3100_LDO_A 0x40
25 #define AB3100_LDO_C 0x41
26 #define AB3100_LDO_D 0x42
27 #define AB3100_LDO_E 0x43
28 #define AB3100_LDO_E_SLEEP 0x44
29 #define AB3100_LDO_F 0x45
30 #define AB3100_LDO_G 0x46
31 #define AB3100_LDO_H 0x47
32 #define AB3100_LDO_H_SLEEP_MODE 0
33 #define AB3100_LDO_H_SLEEP_EN 2
34 #define AB3100_LDO_ON 4
35 #define AB3100_LDO_H_VSEL_AC 5
36 #define AB3100_LDO_K 0x48
37 #define AB3100_LDO_EXT 0x49
38 #define AB3100_BUCK 0x4A
39 #define AB3100_BUCK_SLEEP 0x4B
40 #define AB3100_REG_ON_MASK 0x10
41
42 /**
43 * struct ab3100_regulator
44 * A struct passed around the individual regulator functions
45 * @platform_device: platform device holding this regulator
46 * @dev: handle to the device
47 * @plfdata: AB3100 platform data passed in at probe time
48 * @regreg: regulator register number in the AB3100
49 */
50 struct ab3100_regulator {
51 struct device *dev;
52 struct ab3100_platform_data *plfdata;
53 u8 regreg;
54 };
55
56 /* The order in which registers are initialized */
57 static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
58 AB3100_LDO_A,
59 AB3100_LDO_C,
60 AB3100_LDO_E,
61 AB3100_LDO_E_SLEEP,
62 AB3100_LDO_F,
63 AB3100_LDO_G,
64 AB3100_LDO_H,
65 AB3100_LDO_K,
66 AB3100_LDO_EXT,
67 AB3100_BUCK,
68 AB3100_BUCK_SLEEP,
69 AB3100_LDO_D,
70 };
71
72 /* Preset (hardware defined) voltages for these regulators */
73 #define LDO_A_VOLTAGE 2750000
74 #define LDO_C_VOLTAGE 2650000
75 #define LDO_D_VOLTAGE 2650000
76
77 static const unsigned int ldo_e_buck_typ_voltages[] = {
78 1800000,
79 1400000,
80 1300000,
81 1200000,
82 1100000,
83 1050000,
84 900000,
85 };
86
87 static const unsigned int ldo_f_typ_voltages[] = {
88 1800000,
89 1400000,
90 1300000,
91 1200000,
92 1100000,
93 1050000,
94 2500000,
95 2650000,
96 };
97
98 static const unsigned int ldo_g_typ_voltages[] = {
99 2850000,
100 2750000,
101 1800000,
102 1500000,
103 };
104
105 static const unsigned int ldo_h_typ_voltages[] = {
106 2750000,
107 1800000,
108 1500000,
109 1200000,
110 };
111
112 static const unsigned int ldo_k_typ_voltages[] = {
113 2750000,
114 1800000,
115 };
116
117
118 /* The regulator devices */
119 static struct ab3100_regulator
120 ab3100_regulators[AB3100_NUM_REGULATORS] = {
121 {
122 .regreg = AB3100_LDO_A,
123 },
124 {
125 .regreg = AB3100_LDO_C,
126 },
127 {
128 .regreg = AB3100_LDO_D,
129 },
130 {
131 .regreg = AB3100_LDO_E,
132 },
133 {
134 .regreg = AB3100_LDO_F,
135 },
136 {
137 .regreg = AB3100_LDO_G,
138 },
139 {
140 .regreg = AB3100_LDO_H,
141 },
142 {
143 .regreg = AB3100_LDO_K,
144 },
145 {
146 .regreg = AB3100_LDO_EXT,
147 /* No voltages for the external regulator */
148 },
149 {
150 .regreg = AB3100_BUCK,
151 },
152 };
153
154 /*
155 * General functions for enable, disable and is_enabled used for
156 * LDO: A,C,E,F,G,H,K,EXT and BUCK
157 */
ab3100_enable_regulator(struct regulator_dev * reg)158 static int ab3100_enable_regulator(struct regulator_dev *reg)
159 {
160 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
161 int err;
162 u8 regval;
163
164 err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
165 ®val);
166 if (err) {
167 dev_warn(®->dev, "failed to get regid %d value\n",
168 abreg->regreg);
169 return err;
170 }
171
172 /* The regulator is already on, no reason to go further */
173 if (regval & AB3100_REG_ON_MASK)
174 return 0;
175
176 regval |= AB3100_REG_ON_MASK;
177
178 err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
179 regval);
180 if (err) {
181 dev_warn(®->dev, "failed to set regid %d value\n",
182 abreg->regreg);
183 return err;
184 }
185
186 return 0;
187 }
188
ab3100_disable_regulator(struct regulator_dev * reg)189 static int ab3100_disable_regulator(struct regulator_dev *reg)
190 {
191 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
192 int err;
193 u8 regval;
194
195 /*
196 * LDO D is a special regulator. When it is disabled, the entire
197 * system is shut down. So this is handled specially.
198 */
199 pr_info("Called ab3100_disable_regulator\n");
200 if (abreg->regreg == AB3100_LDO_D) {
201 dev_info(®->dev, "disabling LDO D - shut down system\n");
202 /* Setting LDO D to 0x00 cuts the power to the SoC */
203 return abx500_set_register_interruptible(abreg->dev, 0,
204 AB3100_LDO_D, 0x00U);
205 }
206
207 /*
208 * All other regulators are handled here
209 */
210 err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
211 ®val);
212 if (err) {
213 dev_err(®->dev, "unable to get register 0x%x\n",
214 abreg->regreg);
215 return err;
216 }
217 regval &= ~AB3100_REG_ON_MASK;
218 return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
219 regval);
220 }
221
ab3100_is_enabled_regulator(struct regulator_dev * reg)222 static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
223 {
224 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
225 u8 regval;
226 int err;
227
228 err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
229 ®val);
230 if (err) {
231 dev_err(®->dev, "unable to get register 0x%x\n",
232 abreg->regreg);
233 return err;
234 }
235
236 return regval & AB3100_REG_ON_MASK;
237 }
238
ab3100_get_voltage_regulator(struct regulator_dev * reg)239 static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
240 {
241 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
242 u8 regval;
243 int err;
244
245 /*
246 * For variable types, read out setting and index into
247 * supplied voltage list.
248 */
249 err = abx500_get_register_interruptible(abreg->dev, 0,
250 abreg->regreg, ®val);
251 if (err) {
252 dev_warn(®->dev,
253 "failed to get regulator value in register %02x\n",
254 abreg->regreg);
255 return err;
256 }
257
258 /* The 3 highest bits index voltages */
259 regval &= 0xE0;
260 regval >>= 5;
261
262 if (regval >= reg->desc->n_voltages) {
263 dev_err(®->dev,
264 "regulator register %02x contains an illegal voltage setting\n",
265 abreg->regreg);
266 return -EINVAL;
267 }
268
269 return reg->desc->volt_table[regval];
270 }
271
ab3100_set_voltage_regulator_sel(struct regulator_dev * reg,unsigned selector)272 static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
273 unsigned selector)
274 {
275 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
276 u8 regval;
277 int err;
278
279 err = abx500_get_register_interruptible(abreg->dev, 0,
280 abreg->regreg, ®val);
281 if (err) {
282 dev_warn(®->dev,
283 "failed to get regulator register %02x\n",
284 abreg->regreg);
285 return err;
286 }
287
288 /* The highest three bits control the variable regulators */
289 regval &= ~0xE0;
290 regval |= (selector << 5);
291
292 err = abx500_set_register_interruptible(abreg->dev, 0,
293 abreg->regreg, regval);
294 if (err)
295 dev_warn(®->dev, "failed to set regulator register %02x\n",
296 abreg->regreg);
297
298 return err;
299 }
300
ab3100_set_suspend_voltage_regulator(struct regulator_dev * reg,int uV)301 static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
302 int uV)
303 {
304 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
305 u8 regval;
306 int err;
307 int bestindex;
308 u8 targetreg;
309
310 if (abreg->regreg == AB3100_LDO_E)
311 targetreg = AB3100_LDO_E_SLEEP;
312 else if (abreg->regreg == AB3100_BUCK)
313 targetreg = AB3100_BUCK_SLEEP;
314 else
315 return -EINVAL;
316
317 /* LDO E and BUCK have special suspend voltages you can set */
318 bestindex = regulator_map_voltage_iterate(reg, uV, uV);
319
320 err = abx500_get_register_interruptible(abreg->dev, 0,
321 targetreg, ®val);
322 if (err) {
323 dev_warn(®->dev,
324 "failed to get regulator register %02x\n",
325 targetreg);
326 return err;
327 }
328
329 /* The highest three bits control the variable regulators */
330 regval &= ~0xE0;
331 regval |= (bestindex << 5);
332
333 err = abx500_set_register_interruptible(abreg->dev, 0,
334 targetreg, regval);
335 if (err)
336 dev_warn(®->dev, "failed to set regulator register %02x\n",
337 abreg->regreg);
338
339 return err;
340 }
341
342 /*
343 * The external regulator can just define a fixed voltage.
344 */
ab3100_get_voltage_regulator_external(struct regulator_dev * reg)345 static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
346 {
347 struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
348
349 if (abreg->plfdata)
350 return abreg->plfdata->external_voltage;
351 else
352 /* TODO: encode external voltage into device tree */
353 return 0;
354 }
355
356 static const struct regulator_ops regulator_ops_fixed = {
357 .enable = ab3100_enable_regulator,
358 .disable = ab3100_disable_regulator,
359 .is_enabled = ab3100_is_enabled_regulator,
360 };
361
362 static const struct regulator_ops regulator_ops_variable = {
363 .enable = ab3100_enable_regulator,
364 .disable = ab3100_disable_regulator,
365 .is_enabled = ab3100_is_enabled_regulator,
366 .get_voltage = ab3100_get_voltage_regulator,
367 .set_voltage_sel = ab3100_set_voltage_regulator_sel,
368 .list_voltage = regulator_list_voltage_table,
369 };
370
371 static const struct regulator_ops regulator_ops_variable_sleepable = {
372 .enable = ab3100_enable_regulator,
373 .disable = ab3100_disable_regulator,
374 .is_enabled = ab3100_is_enabled_regulator,
375 .get_voltage = ab3100_get_voltage_regulator,
376 .set_voltage_sel = ab3100_set_voltage_regulator_sel,
377 .set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
378 .list_voltage = regulator_list_voltage_table,
379 };
380
381 /*
382 * LDO EXT is an external regulator so it is really
383 * not possible to set any voltage locally here, AB3100
384 * is an on/off switch plain an simple. The external
385 * voltage is defined in the board set-up if any.
386 */
387 static const struct regulator_ops regulator_ops_external = {
388 .enable = ab3100_enable_regulator,
389 .disable = ab3100_disable_regulator,
390 .is_enabled = ab3100_is_enabled_regulator,
391 .get_voltage = ab3100_get_voltage_regulator_external,
392 };
393
394 static const struct regulator_desc
395 ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
396 {
397 .name = "LDO_A",
398 .id = AB3100_LDO_A,
399 .ops = ®ulator_ops_fixed,
400 .n_voltages = 1,
401 .type = REGULATOR_VOLTAGE,
402 .owner = THIS_MODULE,
403 .fixed_uV = LDO_A_VOLTAGE,
404 .enable_time = 200,
405 },
406 {
407 .name = "LDO_C",
408 .id = AB3100_LDO_C,
409 .ops = ®ulator_ops_fixed,
410 .n_voltages = 1,
411 .type = REGULATOR_VOLTAGE,
412 .owner = THIS_MODULE,
413 .fixed_uV = LDO_C_VOLTAGE,
414 .enable_time = 200,
415 },
416 {
417 .name = "LDO_D",
418 .id = AB3100_LDO_D,
419 .ops = ®ulator_ops_fixed,
420 .n_voltages = 1,
421 .type = REGULATOR_VOLTAGE,
422 .owner = THIS_MODULE,
423 .fixed_uV = LDO_D_VOLTAGE,
424 .enable_time = 200,
425 },
426 {
427 .name = "LDO_E",
428 .id = AB3100_LDO_E,
429 .ops = ®ulator_ops_variable_sleepable,
430 .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
431 .volt_table = ldo_e_buck_typ_voltages,
432 .type = REGULATOR_VOLTAGE,
433 .owner = THIS_MODULE,
434 .enable_time = 200,
435 },
436 {
437 .name = "LDO_F",
438 .id = AB3100_LDO_F,
439 .ops = ®ulator_ops_variable,
440 .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
441 .volt_table = ldo_f_typ_voltages,
442 .type = REGULATOR_VOLTAGE,
443 .owner = THIS_MODULE,
444 .enable_time = 600,
445 },
446 {
447 .name = "LDO_G",
448 .id = AB3100_LDO_G,
449 .ops = ®ulator_ops_variable,
450 .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
451 .volt_table = ldo_g_typ_voltages,
452 .type = REGULATOR_VOLTAGE,
453 .owner = THIS_MODULE,
454 .enable_time = 400,
455 },
456 {
457 .name = "LDO_H",
458 .id = AB3100_LDO_H,
459 .ops = ®ulator_ops_variable,
460 .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
461 .volt_table = ldo_h_typ_voltages,
462 .type = REGULATOR_VOLTAGE,
463 .owner = THIS_MODULE,
464 .enable_time = 200,
465 },
466 {
467 .name = "LDO_K",
468 .id = AB3100_LDO_K,
469 .ops = ®ulator_ops_variable,
470 .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
471 .volt_table = ldo_k_typ_voltages,
472 .type = REGULATOR_VOLTAGE,
473 .owner = THIS_MODULE,
474 .enable_time = 200,
475 },
476 {
477 .name = "LDO_EXT",
478 .id = AB3100_LDO_EXT,
479 .ops = ®ulator_ops_external,
480 .type = REGULATOR_VOLTAGE,
481 .owner = THIS_MODULE,
482 },
483 {
484 .name = "BUCK",
485 .id = AB3100_BUCK,
486 .ops = ®ulator_ops_variable_sleepable,
487 .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
488 .volt_table = ldo_e_buck_typ_voltages,
489 .type = REGULATOR_VOLTAGE,
490 .owner = THIS_MODULE,
491 .enable_time = 1000,
492 },
493 };
494
ab3100_regulator_register(struct platform_device * pdev,struct ab3100_platform_data * plfdata,struct regulator_init_data * init_data,struct device_node * np,unsigned long id)495 static int ab3100_regulator_register(struct platform_device *pdev,
496 struct ab3100_platform_data *plfdata,
497 struct regulator_init_data *init_data,
498 struct device_node *np,
499 unsigned long id)
500 {
501 const struct regulator_desc *desc;
502 struct ab3100_regulator *reg;
503 struct regulator_dev *rdev;
504 struct regulator_config config = { };
505 int err, i;
506
507 for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
508 desc = &ab3100_regulator_desc[i];
509 if (desc->id == id)
510 break;
511 }
512 if (desc->id != id)
513 return -ENODEV;
514
515 /* Same index used for this array */
516 reg = &ab3100_regulators[i];
517
518 /*
519 * Initialize per-regulator struct.
520 * Inherit platform data, this comes down from the
521 * i2c boarddata, from the machine. So if you want to
522 * see what it looks like for a certain machine, go
523 * into the machine I2C setup.
524 */
525 reg->dev = &pdev->dev;
526 if (plfdata) {
527 reg->plfdata = plfdata;
528 config.init_data = &plfdata->reg_constraints[i];
529 } else if (np) {
530 config.of_node = np;
531 config.init_data = init_data;
532 }
533 config.dev = &pdev->dev;
534 config.driver_data = reg;
535
536 rdev = devm_regulator_register(&pdev->dev, desc, &config);
537 if (IS_ERR(rdev)) {
538 err = PTR_ERR(rdev);
539 dev_err(&pdev->dev,
540 "%s: failed to register regulator %s err %d\n",
541 __func__, desc->name,
542 err);
543 return err;
544 }
545
546 return 0;
547 }
548
549 static struct of_regulator_match ab3100_regulator_matches[] = {
550 { .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
551 { .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
552 { .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
553 { .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
554 { .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
555 { .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
556 { .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
557 { .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
558 { .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
559 { .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
560 };
561
562 /*
563 * Initial settings of ab3100 registers.
564 * Common for below LDO regulator settings are that
565 * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
566 * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
567 */
568 /* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
569 #define LDO_A_SETTING 0x16
570 /* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
571 #define LDO_C_SETTING 0x10
572 /* LDO_D 0x10: 2.65V, ON, sleep mode not used */
573 #define LDO_D_SETTING 0x10
574 /* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
575 #define LDO_E_SETTING 0x10
576 /* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
577 #define LDO_E_SLEEP_SETTING 0x00
578 /* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
579 #define LDO_F_SETTING 0xD0
580 /* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
581 #define LDO_G_SETTING 0x00
582 /* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
583 #define LDO_H_SETTING 0x18
584 /* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
585 #define LDO_K_SETTING 0x00
586 /* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
587 #define LDO_EXT_SETTING 0x00
588 /* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
589 #define BUCK_SETTING 0x7D
590 /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
591 #define BUCK_SLEEP_SETTING 0xAC
592
593 static const u8 ab3100_reg_initvals[] = {
594 LDO_A_SETTING,
595 LDO_C_SETTING,
596 LDO_E_SETTING,
597 LDO_E_SLEEP_SETTING,
598 LDO_F_SETTING,
599 LDO_G_SETTING,
600 LDO_H_SETTING,
601 LDO_K_SETTING,
602 LDO_EXT_SETTING,
603 BUCK_SETTING,
604 BUCK_SLEEP_SETTING,
605 LDO_D_SETTING,
606 };
607
608 static int
ab3100_regulator_of_probe(struct platform_device * pdev,struct device_node * np)609 ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
610 {
611 int err, i;
612
613 /*
614 * Set up the regulator registers, as was previously done with
615 * platform data.
616 */
617 /* Set up regulators */
618 for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
619 err = abx500_set_register_interruptible(&pdev->dev, 0,
620 ab3100_reg_init_order[i],
621 ab3100_reg_initvals[i]);
622 if (err) {
623 dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
624 err);
625 return err;
626 }
627 }
628
629 for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
630 err = ab3100_regulator_register(
631 pdev, NULL, ab3100_regulator_matches[i].init_data,
632 ab3100_regulator_matches[i].of_node,
633 (unsigned long)ab3100_regulator_matches[i].driver_data);
634 if (err)
635 return err;
636 }
637
638 return 0;
639 }
640
641
ab3100_regulators_probe(struct platform_device * pdev)642 static int ab3100_regulators_probe(struct platform_device *pdev)
643 {
644 struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
645 struct device_node *np = pdev->dev.of_node;
646 int err = 0;
647 u8 data;
648 int i;
649
650 /* Check chip state */
651 err = abx500_get_register_interruptible(&pdev->dev, 0,
652 AB3100_LDO_D, &data);
653 if (err) {
654 dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
655 return err;
656 }
657 if (data & 0x10)
658 dev_notice(&pdev->dev,
659 "chip is already in active mode (Warm start)\n");
660 else
661 dev_notice(&pdev->dev,
662 "chip is in inactive mode (Cold start)\n");
663
664 if (np) {
665 err = of_regulator_match(&pdev->dev, np,
666 ab3100_regulator_matches,
667 ARRAY_SIZE(ab3100_regulator_matches));
668 if (err < 0) {
669 dev_err(&pdev->dev,
670 "Error parsing regulator init data: %d\n", err);
671 return err;
672 }
673 return ab3100_regulator_of_probe(pdev, np);
674 }
675
676 /* Set up regulators */
677 for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
678 err = abx500_set_register_interruptible(&pdev->dev, 0,
679 ab3100_reg_init_order[i],
680 plfdata->reg_initvals[i]);
681 if (err) {
682 dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
683 err);
684 return err;
685 }
686 }
687
688 /* Register the regulators */
689 for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
690 const struct regulator_desc *desc = &ab3100_regulator_desc[i];
691
692 err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
693 desc->id);
694 if (err)
695 return err;
696 }
697
698 return 0;
699 }
700
701 static struct platform_driver ab3100_regulators_driver = {
702 .driver = {
703 .name = "ab3100-regulators",
704 },
705 .probe = ab3100_regulators_probe,
706 };
707
ab3100_regulators_init(void)708 static __init int ab3100_regulators_init(void)
709 {
710 return platform_driver_register(&ab3100_regulators_driver);
711 }
712
ab3100_regulators_exit(void)713 static __exit void ab3100_regulators_exit(void)
714 {
715 platform_driver_unregister(&ab3100_regulators_driver);
716 }
717
718 subsys_initcall(ab3100_regulators_init);
719 module_exit(ab3100_regulators_exit);
720
721 MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
722 MODULE_DESCRIPTION("AB3100 Regulator driver");
723 MODULE_LICENSE("GPL");
724 MODULE_ALIAS("platform:ab3100-regulators");
725