1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Gateworks I2C PLD GPIO expander
4 //
5 // Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
6 //
7 // Based on code and know-how from the OpenWrt driver:
8 // Copyright (C) 2009 Gateworks Corporation
9 // Authors: Chris Lang, Imre Kaloz
10
11 #include <linux/bits.h>
12 #include <linux/kernel.h>
13 #include <linux/slab.h>
14 #include <linux/gpio/driver.h>
15 #include <linux/i2c.h>
16 #include <linux/module.h>
17
18 /**
19 * struct gw_pld - State container for Gateworks PLD
20 * @chip: GPIO chip instance
21 * @client: I2C client
22 * @out: shadow register for the output bute
23 */
24 struct gw_pld {
25 struct gpio_chip chip;
26 struct i2c_client *client;
27 u8 out;
28 };
29
30 /*
31 * The Gateworks I2C PLD chip only expose one read and one write register.
32 * Writing a "one" bit (to match the reset state) lets that pin be used as an
33 * input. It is an open-drain model.
34 */
gw_pld_input8(struct gpio_chip * gc,unsigned offset)35 static int gw_pld_input8(struct gpio_chip *gc, unsigned offset)
36 {
37 struct gw_pld *gw = gpiochip_get_data(gc);
38
39 gw->out |= BIT(offset);
40 return i2c_smbus_write_byte(gw->client, gw->out);
41 }
42
gw_pld_get8(struct gpio_chip * gc,unsigned offset)43 static int gw_pld_get8(struct gpio_chip *gc, unsigned offset)
44 {
45 struct gw_pld *gw = gpiochip_get_data(gc);
46 s32 val;
47
48 val = i2c_smbus_read_byte(gw->client);
49
50 return (val < 0) ? 0 : !!(val & BIT(offset));
51 }
52
gw_pld_output8(struct gpio_chip * gc,unsigned offset,int value)53 static int gw_pld_output8(struct gpio_chip *gc, unsigned offset, int value)
54 {
55 struct gw_pld *gw = gpiochip_get_data(gc);
56
57 if (value)
58 gw->out |= BIT(offset);
59 else
60 gw->out &= ~BIT(offset);
61
62 return i2c_smbus_write_byte(gw->client, gw->out);
63 }
64
gw_pld_set8(struct gpio_chip * gc,unsigned offset,int value)65 static void gw_pld_set8(struct gpio_chip *gc, unsigned offset, int value)
66 {
67 gw_pld_output8(gc, offset, value);
68 }
69
gw_pld_probe(struct i2c_client * client,const struct i2c_device_id * id)70 static int gw_pld_probe(struct i2c_client *client,
71 const struct i2c_device_id *id)
72 {
73 struct device *dev = &client->dev;
74 struct device_node *np = dev->of_node;
75 struct gw_pld *gw;
76 int ret;
77
78 gw = devm_kzalloc(dev, sizeof(*gw), GFP_KERNEL);
79 if (!gw)
80 return -ENOMEM;
81
82 gw->chip.base = -1;
83 gw->chip.can_sleep = true;
84 gw->chip.parent = dev;
85 gw->chip.of_node = np;
86 gw->chip.owner = THIS_MODULE;
87 gw->chip.label = dev_name(dev);
88 gw->chip.ngpio = 8;
89 gw->chip.direction_input = gw_pld_input8;
90 gw->chip.get = gw_pld_get8;
91 gw->chip.direction_output = gw_pld_output8;
92 gw->chip.set = gw_pld_set8;
93 gw->client = client;
94
95 /*
96 * The Gateworks I2C PLD chip does not properly send the acknowledge
97 * bit at all times, but we can still use the standard i2c_smbus
98 * functions by simply ignoring this bit.
99 */
100 client->flags |= I2C_M_IGNORE_NAK;
101 gw->out = 0xFF;
102
103 i2c_set_clientdata(client, gw);
104
105 ret = devm_gpiochip_add_data(dev, &gw->chip, gw);
106 if (ret)
107 return ret;
108
109 dev_info(dev, "registered Gateworks PLD GPIO device\n");
110
111 return 0;
112 }
113
114 static const struct i2c_device_id gw_pld_id[] = {
115 { "gw-pld", },
116 { }
117 };
118 MODULE_DEVICE_TABLE(i2c, gw_pld_id);
119
120 static const struct of_device_id gw_pld_dt_ids[] = {
121 { .compatible = "gateworks,pld-gpio", },
122 { },
123 };
124 MODULE_DEVICE_TABLE(of, gw_pld_dt_ids);
125
126 static struct i2c_driver gw_pld_driver = {
127 .driver = {
128 .name = "gw_pld",
129 .of_match_table = gw_pld_dt_ids,
130 },
131 .probe = gw_pld_probe,
132 .id_table = gw_pld_id,
133 };
134 module_i2c_driver(gw_pld_driver);
135
136 MODULE_LICENSE("GPL");
137 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
138