1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Adaptec AAC series RAID controller driver
4 * (c) Copyright 2001 Red Hat Inc.
5 *
6 * based on the old aacraid driver that is..
7 * Adaptec aacraid device driver for Linux.
8 *
9 * Copyright (c) 2000-2010 Adaptec, Inc.
10 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
12 *
13 * Module Name:
14 * src.c
15 *
16 * Abstract: Hardware Device Interface for PMC SRC based controllers
17 */
18
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/pci.h>
23 #include <linux/spinlock.h>
24 #include <linux/slab.h>
25 #include <linux/blkdev.h>
26 #include <linux/delay.h>
27 #include <linux/completion.h>
28 #include <linux/time.h>
29 #include <linux/interrupt.h>
30 #include <scsi/scsi_host.h>
31
32 #include "aacraid.h"
33
34 static int aac_src_get_sync_status(struct aac_dev *dev);
35
aac_src_intr_message(int irq,void * dev_id)36 static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
37 {
38 struct aac_msix_ctx *ctx;
39 struct aac_dev *dev;
40 unsigned long bellbits, bellbits_shifted;
41 int vector_no;
42 int isFastResponse, mode;
43 u32 index, handle;
44
45 ctx = (struct aac_msix_ctx *)dev_id;
46 dev = ctx->dev;
47 vector_no = ctx->vector_no;
48
49 if (dev->msi_enabled) {
50 mode = AAC_INT_MODE_MSI;
51 if (vector_no == 0) {
52 bellbits = src_readl(dev, MUnit.ODR_MSI);
53 if (bellbits & 0x40000)
54 mode |= AAC_INT_MODE_AIF;
55 if (bellbits & 0x1000)
56 mode |= AAC_INT_MODE_SYNC;
57 }
58 } else {
59 mode = AAC_INT_MODE_INTX;
60 bellbits = src_readl(dev, MUnit.ODR_R);
61 if (bellbits & PmDoorBellResponseSent) {
62 bellbits = PmDoorBellResponseSent;
63 src_writel(dev, MUnit.ODR_C, bellbits);
64 src_readl(dev, MUnit.ODR_C);
65 } else {
66 bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
67 src_writel(dev, MUnit.ODR_C, bellbits);
68 src_readl(dev, MUnit.ODR_C);
69
70 if (bellbits_shifted & DoorBellAifPending)
71 mode |= AAC_INT_MODE_AIF;
72 else if (bellbits_shifted & OUTBOUNDDOORBELL_0)
73 mode |= AAC_INT_MODE_SYNC;
74 }
75 }
76
77 if (mode & AAC_INT_MODE_SYNC) {
78 unsigned long sflags;
79 struct list_head *entry;
80 int send_it = 0;
81 extern int aac_sync_mode;
82
83 if (!aac_sync_mode && !dev->msi_enabled) {
84 src_writel(dev, MUnit.ODR_C, bellbits);
85 src_readl(dev, MUnit.ODR_C);
86 }
87
88 if (dev->sync_fib) {
89 if (dev->sync_fib->callback)
90 dev->sync_fib->callback(dev->sync_fib->callback_data,
91 dev->sync_fib);
92 spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
93 if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
94 dev->management_fib_count--;
95 complete(&dev->sync_fib->event_wait);
96 }
97 spin_unlock_irqrestore(&dev->sync_fib->event_lock,
98 sflags);
99 spin_lock_irqsave(&dev->sync_lock, sflags);
100 if (!list_empty(&dev->sync_fib_list)) {
101 entry = dev->sync_fib_list.next;
102 dev->sync_fib = list_entry(entry,
103 struct fib,
104 fiblink);
105 list_del(entry);
106 send_it = 1;
107 } else {
108 dev->sync_fib = NULL;
109 }
110 spin_unlock_irqrestore(&dev->sync_lock, sflags);
111 if (send_it) {
112 aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
113 (u32)dev->sync_fib->hw_fib_pa,
114 0, 0, 0, 0, 0,
115 NULL, NULL, NULL, NULL, NULL);
116 }
117 }
118 if (!dev->msi_enabled)
119 mode = 0;
120
121 }
122
123 if (mode & AAC_INT_MODE_AIF) {
124 /* handle AIF */
125 if (dev->sa_firmware) {
126 u32 events = src_readl(dev, MUnit.SCR0);
127
128 aac_intr_normal(dev, events, 1, 0, NULL);
129 writel(events, &dev->IndexRegs->Mailbox[0]);
130 src_writel(dev, MUnit.IDR, 1 << 23);
131 } else {
132 if (dev->aif_thread && dev->fsa_dev)
133 aac_intr_normal(dev, 0, 2, 0, NULL);
134 }
135 if (dev->msi_enabled)
136 aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
137 mode = 0;
138 }
139
140 if (mode) {
141 index = dev->host_rrq_idx[vector_no];
142
143 for (;;) {
144 isFastResponse = 0;
145 /* remove toggle bit (31) */
146 handle = le32_to_cpu((dev->host_rrq[index])
147 & 0x7fffffff);
148 /* check fast response bits (30, 1) */
149 if (handle & 0x40000000)
150 isFastResponse = 1;
151 handle &= 0x0000ffff;
152 if (handle == 0)
153 break;
154 handle >>= 2;
155 if (dev->msi_enabled && dev->max_msix > 1)
156 atomic_dec(&dev->rrq_outstanding[vector_no]);
157 aac_intr_normal(dev, handle, 0, isFastResponse, NULL);
158 dev->host_rrq[index++] = 0;
159 if (index == (vector_no + 1) * dev->vector_cap)
160 index = vector_no * dev->vector_cap;
161 dev->host_rrq_idx[vector_no] = index;
162 }
163 mode = 0;
164 }
165
166 return IRQ_HANDLED;
167 }
168
169 /**
170 * aac_src_disable_interrupt - Disable interrupts
171 * @dev: Adapter
172 */
173
aac_src_disable_interrupt(struct aac_dev * dev)174 static void aac_src_disable_interrupt(struct aac_dev *dev)
175 {
176 src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
177 }
178
179 /**
180 * aac_src_enable_interrupt_message - Enable interrupts
181 * @dev: Adapter
182 */
183
aac_src_enable_interrupt_message(struct aac_dev * dev)184 static void aac_src_enable_interrupt_message(struct aac_dev *dev)
185 {
186 aac_src_access_devreg(dev, AAC_ENABLE_INTERRUPT);
187 }
188
189 /**
190 * src_sync_cmd - send a command and wait
191 * @dev: Adapter
192 * @command: Command to execute
193 * @p1: first parameter
194 * @p2: second parameter
195 * @p3: third parameter
196 * @p4: forth parameter
197 * @p5: fifth parameter
198 * @p6: sixth parameter
199 * @status: adapter status
200 * @r1: first return value
201 * @r2: second return valu
202 * @r3: third return value
203 * @r4: forth return value
204 *
205 * This routine will send a synchronous command to the adapter and wait
206 * for its completion.
207 */
208
src_sync_cmd(struct aac_dev * dev,u32 command,u32 p1,u32 p2,u32 p3,u32 p4,u32 p5,u32 p6,u32 * status,u32 * r1,u32 * r2,u32 * r3,u32 * r4)209 static int src_sync_cmd(struct aac_dev *dev, u32 command,
210 u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
211 u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
212 {
213 unsigned long start;
214 unsigned long delay;
215 int ok;
216
217 /*
218 * Write the command into Mailbox 0
219 */
220 writel(command, &dev->IndexRegs->Mailbox[0]);
221 /*
222 * Write the parameters into Mailboxes 1 - 6
223 */
224 writel(p1, &dev->IndexRegs->Mailbox[1]);
225 writel(p2, &dev->IndexRegs->Mailbox[2]);
226 writel(p3, &dev->IndexRegs->Mailbox[3]);
227 writel(p4, &dev->IndexRegs->Mailbox[4]);
228
229 /*
230 * Clear the synch command doorbell to start on a clean slate.
231 */
232 if (!dev->msi_enabled)
233 src_writel(dev,
234 MUnit.ODR_C,
235 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
236
237 /*
238 * Disable doorbell interrupts
239 */
240 src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
241
242 /*
243 * Force the completion of the mask register write before issuing
244 * the interrupt.
245 */
246 src_readl(dev, MUnit.OIMR);
247
248 /*
249 * Signal that there is a new synch command
250 */
251 src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
252
253 if ((!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) &&
254 !dev->in_soft_reset) {
255 ok = 0;
256 start = jiffies;
257
258 if (command == IOP_RESET_ALWAYS) {
259 /* Wait up to 10 sec */
260 delay = 10*HZ;
261 } else {
262 /* Wait up to 5 minutes */
263 delay = 300*HZ;
264 }
265 while (time_before(jiffies, start+delay)) {
266 udelay(5); /* Delay 5 microseconds to let Mon960 get info. */
267 /*
268 * Mon960 will set doorbell0 bit when it has completed the command.
269 */
270 if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
271 /*
272 * Clear the doorbell.
273 */
274 if (dev->msi_enabled)
275 aac_src_access_devreg(dev,
276 AAC_CLEAR_SYNC_BIT);
277 else
278 src_writel(dev,
279 MUnit.ODR_C,
280 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
281 ok = 1;
282 break;
283 }
284 /*
285 * Yield the processor in case we are slow
286 */
287 msleep(1);
288 }
289 if (unlikely(ok != 1)) {
290 /*
291 * Restore interrupt mask even though we timed out
292 */
293 aac_adapter_enable_int(dev);
294 return -ETIMEDOUT;
295 }
296 /*
297 * Pull the synch status from Mailbox 0.
298 */
299 if (status)
300 *status = readl(&dev->IndexRegs->Mailbox[0]);
301 if (r1)
302 *r1 = readl(&dev->IndexRegs->Mailbox[1]);
303 if (r2)
304 *r2 = readl(&dev->IndexRegs->Mailbox[2]);
305 if (r3)
306 *r3 = readl(&dev->IndexRegs->Mailbox[3]);
307 if (r4)
308 *r4 = readl(&dev->IndexRegs->Mailbox[4]);
309 if (command == GET_COMM_PREFERRED_SETTINGS)
310 dev->max_msix =
311 readl(&dev->IndexRegs->Mailbox[5]) & 0xFFFF;
312 /*
313 * Clear the synch command doorbell.
314 */
315 if (!dev->msi_enabled)
316 src_writel(dev,
317 MUnit.ODR_C,
318 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
319 }
320
321 /*
322 * Restore interrupt mask
323 */
324 aac_adapter_enable_int(dev);
325 return 0;
326 }
327
328 /**
329 * aac_src_interrupt_adapter - interrupt adapter
330 * @dev: Adapter
331 *
332 * Send an interrupt to the i960 and breakpoint it.
333 */
334
aac_src_interrupt_adapter(struct aac_dev * dev)335 static void aac_src_interrupt_adapter(struct aac_dev *dev)
336 {
337 src_sync_cmd(dev, BREAKPOINT_REQUEST,
338 0, 0, 0, 0, 0, 0,
339 NULL, NULL, NULL, NULL, NULL);
340 }
341
342 /**
343 * aac_src_notify_adapter - send an event to the adapter
344 * @dev: Adapter
345 * @event: Event to send
346 *
347 * Notify the i960 that something it probably cares about has
348 * happened.
349 */
350
aac_src_notify_adapter(struct aac_dev * dev,u32 event)351 static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
352 {
353 switch (event) {
354
355 case AdapNormCmdQue:
356 src_writel(dev, MUnit.ODR_C,
357 INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
358 break;
359 case HostNormRespNotFull:
360 src_writel(dev, MUnit.ODR_C,
361 INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
362 break;
363 case AdapNormRespQue:
364 src_writel(dev, MUnit.ODR_C,
365 INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
366 break;
367 case HostNormCmdNotFull:
368 src_writel(dev, MUnit.ODR_C,
369 INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
370 break;
371 case FastIo:
372 src_writel(dev, MUnit.ODR_C,
373 INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
374 break;
375 case AdapPrintfDone:
376 src_writel(dev, MUnit.ODR_C,
377 INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
378 break;
379 default:
380 BUG();
381 break;
382 }
383 }
384
385 /**
386 * aac_src_start_adapter - activate adapter
387 * @dev: Adapter
388 *
389 * Start up processing on an i960 based AAC adapter
390 */
391
aac_src_start_adapter(struct aac_dev * dev)392 static void aac_src_start_adapter(struct aac_dev *dev)
393 {
394 union aac_init *init;
395 int i;
396
397 /* reset host_rrq_idx first */
398 for (i = 0; i < dev->max_msix; i++) {
399 dev->host_rrq_idx[i] = i * dev->vector_cap;
400 atomic_set(&dev->rrq_outstanding[i], 0);
401 }
402 atomic_set(&dev->msix_counter, 0);
403 dev->fibs_pushed_no = 0;
404
405 init = dev->init;
406 if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
407 init->r8.host_elapsed_seconds =
408 cpu_to_le32(ktime_get_real_seconds());
409 src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
410 lower_32_bits(dev->init_pa),
411 upper_32_bits(dev->init_pa),
412 sizeof(struct _r8) +
413 (AAC_MAX_HRRQ - 1) * sizeof(struct _rrq),
414 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
415 } else {
416 init->r7.host_elapsed_seconds =
417 cpu_to_le32(ktime_get_real_seconds());
418 // We can only use a 32 bit address here
419 src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
420 (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
421 NULL, NULL, NULL, NULL, NULL);
422 }
423
424 }
425
426 /**
427 * aac_src_check_health
428 * @dev: device to check if healthy
429 *
430 * Will attempt to determine if the specified adapter is alive and
431 * capable of handling requests, returning 0 if alive.
432 */
aac_src_check_health(struct aac_dev * dev)433 static int aac_src_check_health(struct aac_dev *dev)
434 {
435 u32 status = src_readl(dev, MUnit.OMR);
436
437 /*
438 * Check to see if the board panic'd.
439 */
440 if (unlikely(status & KERNEL_PANIC))
441 goto err_blink;
442
443 /*
444 * Check to see if the board failed any self tests.
445 */
446 if (unlikely(status & SELF_TEST_FAILED))
447 goto err_out;
448
449 /*
450 * Check to see if the board failed any self tests.
451 */
452 if (unlikely(status & MONITOR_PANIC))
453 goto err_out;
454
455 /*
456 * Wait for the adapter to be up and running.
457 */
458 if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
459 return -3;
460 /*
461 * Everything is OK
462 */
463 return 0;
464
465 err_out:
466 return -1;
467
468 err_blink:
469 return (status >> 16) & 0xFF;
470 }
471
aac_get_vector(struct aac_dev * dev)472 static inline u32 aac_get_vector(struct aac_dev *dev)
473 {
474 return atomic_inc_return(&dev->msix_counter)%dev->max_msix;
475 }
476
477 /**
478 * aac_src_deliver_message
479 * @fib: fib to issue
480 *
481 * Will send a fib, returning 0 if successful.
482 */
aac_src_deliver_message(struct fib * fib)483 static int aac_src_deliver_message(struct fib *fib)
484 {
485 struct aac_dev *dev = fib->dev;
486 struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
487 u32 fibsize;
488 dma_addr_t address;
489 struct aac_fib_xporthdr *pFibX;
490 int native_hba;
491 #if !defined(writeq)
492 unsigned long flags;
493 #endif
494
495 u16 vector_no;
496
497 atomic_inc(&q->numpending);
498
499 native_hba = (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) ? 1 : 0;
500
501
502 if (dev->msi_enabled && dev->max_msix > 1 &&
503 (native_hba || fib->hw_fib_va->header.Command != AifRequest)) {
504
505 if ((dev->comm_interface == AAC_COMM_MESSAGE_TYPE3)
506 && dev->sa_firmware)
507 vector_no = aac_get_vector(dev);
508 else
509 vector_no = fib->vector_no;
510
511 if (native_hba) {
512 if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) {
513 struct aac_hba_tm_req *tm_req;
514
515 tm_req = (struct aac_hba_tm_req *)
516 fib->hw_fib_va;
517 if (tm_req->iu_type ==
518 HBA_IU_TYPE_SCSI_TM_REQ) {
519 ((struct aac_hba_tm_req *)
520 fib->hw_fib_va)->reply_qid
521 = vector_no;
522 ((struct aac_hba_tm_req *)
523 fib->hw_fib_va)->request_id
524 += (vector_no << 16);
525 } else {
526 ((struct aac_hba_reset_req *)
527 fib->hw_fib_va)->reply_qid
528 = vector_no;
529 ((struct aac_hba_reset_req *)
530 fib->hw_fib_va)->request_id
531 += (vector_no << 16);
532 }
533 } else {
534 ((struct aac_hba_cmd_req *)
535 fib->hw_fib_va)->reply_qid
536 = vector_no;
537 ((struct aac_hba_cmd_req *)
538 fib->hw_fib_va)->request_id
539 += (vector_no << 16);
540 }
541 } else {
542 fib->hw_fib_va->header.Handle += (vector_no << 16);
543 }
544 } else {
545 vector_no = 0;
546 }
547
548 atomic_inc(&dev->rrq_outstanding[vector_no]);
549
550 if (native_hba) {
551 address = fib->hw_fib_pa;
552 fibsize = (fib->hbacmd_size + 127) / 128 - 1;
553 if (fibsize > 31)
554 fibsize = 31;
555 address |= fibsize;
556 #if defined(writeq)
557 src_writeq(dev, MUnit.IQN_L, (u64)address);
558 #else
559 spin_lock_irqsave(&fib->dev->iq_lock, flags);
560 src_writel(dev, MUnit.IQN_H,
561 upper_32_bits(address) & 0xffffffff);
562 src_writel(dev, MUnit.IQN_L, address & 0xffffffff);
563 spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
564 #endif
565 } else {
566 if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2 ||
567 dev->comm_interface == AAC_COMM_MESSAGE_TYPE3) {
568 /* Calculate the amount to the fibsize bits */
569 fibsize = (le16_to_cpu(fib->hw_fib_va->header.Size)
570 + 127) / 128 - 1;
571 /* New FIB header, 32-bit */
572 address = fib->hw_fib_pa;
573 fib->hw_fib_va->header.StructType = FIB_MAGIC2;
574 fib->hw_fib_va->header.SenderFibAddress =
575 cpu_to_le32((u32)address);
576 fib->hw_fib_va->header.u.TimeStamp = 0;
577 WARN_ON(upper_32_bits(address) != 0L);
578 } else {
579 /* Calculate the amount to the fibsize bits */
580 fibsize = (sizeof(struct aac_fib_xporthdr) +
581 le16_to_cpu(fib->hw_fib_va->header.Size)
582 + 127) / 128 - 1;
583 /* Fill XPORT header */
584 pFibX = (struct aac_fib_xporthdr *)
585 ((unsigned char *)fib->hw_fib_va -
586 sizeof(struct aac_fib_xporthdr));
587 pFibX->Handle = fib->hw_fib_va->header.Handle;
588 pFibX->HostAddress =
589 cpu_to_le64((u64)fib->hw_fib_pa);
590 pFibX->Size = cpu_to_le32(
591 le16_to_cpu(fib->hw_fib_va->header.Size));
592 address = fib->hw_fib_pa -
593 (u64)sizeof(struct aac_fib_xporthdr);
594 }
595 if (fibsize > 31)
596 fibsize = 31;
597 address |= fibsize;
598
599 #if defined(writeq)
600 src_writeq(dev, MUnit.IQ_L, (u64)address);
601 #else
602 spin_lock_irqsave(&fib->dev->iq_lock, flags);
603 src_writel(dev, MUnit.IQ_H,
604 upper_32_bits(address) & 0xffffffff);
605 src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
606 spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
607 #endif
608 }
609 return 0;
610 }
611
612 /**
613 * aac_src_ioremap
614 * @dev: device ioremap
615 * @size: mapping resize request
616 *
617 */
aac_src_ioremap(struct aac_dev * dev,u32 size)618 static int aac_src_ioremap(struct aac_dev *dev, u32 size)
619 {
620 if (!size) {
621 iounmap(dev->regs.src.bar1);
622 dev->regs.src.bar1 = NULL;
623 iounmap(dev->regs.src.bar0);
624 dev->base = dev->regs.src.bar0 = NULL;
625 return 0;
626 }
627 dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
628 AAC_MIN_SRC_BAR1_SIZE);
629 dev->base = NULL;
630 if (dev->regs.src.bar1 == NULL)
631 return -1;
632 dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
633 if (dev->base == NULL) {
634 iounmap(dev->regs.src.bar1);
635 dev->regs.src.bar1 = NULL;
636 return -1;
637 }
638 dev->IndexRegs = &((struct src_registers __iomem *)
639 dev->base)->u.tupelo.IndexRegs;
640 return 0;
641 }
642
643 /**
644 * aac_srcv_ioremap
645 * @dev: device ioremap
646 * @size: mapping resize request
647 *
648 */
aac_srcv_ioremap(struct aac_dev * dev,u32 size)649 static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
650 {
651 if (!size) {
652 iounmap(dev->regs.src.bar0);
653 dev->base = dev->regs.src.bar0 = NULL;
654 return 0;
655 }
656
657 dev->regs.src.bar1 =
658 ioremap(pci_resource_start(dev->pdev, 2), AAC_MIN_SRCV_BAR1_SIZE);
659 dev->base = NULL;
660 if (dev->regs.src.bar1 == NULL)
661 return -1;
662 dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
663 if (dev->base == NULL) {
664 iounmap(dev->regs.src.bar1);
665 dev->regs.src.bar1 = NULL;
666 return -1;
667 }
668 dev->IndexRegs = &((struct src_registers __iomem *)
669 dev->base)->u.denali.IndexRegs;
670 return 0;
671 }
672
aac_set_intx_mode(struct aac_dev * dev)673 void aac_set_intx_mode(struct aac_dev *dev)
674 {
675 if (dev->msi_enabled) {
676 aac_src_access_devreg(dev, AAC_ENABLE_INTX);
677 dev->msi_enabled = 0;
678 msleep(5000); /* Delay 5 seconds */
679 }
680 }
681
aac_clear_omr(struct aac_dev * dev)682 static void aac_clear_omr(struct aac_dev *dev)
683 {
684 u32 omr_value = 0;
685
686 omr_value = src_readl(dev, MUnit.OMR);
687
688 /*
689 * Check for PCI Errors or Kernel Panic
690 */
691 if ((omr_value == INVALID_OMR) || (omr_value & KERNEL_PANIC))
692 omr_value = 0;
693
694 /*
695 * Preserve MSIX Value if any
696 */
697 src_writel(dev, MUnit.OMR, omr_value & AAC_INT_MODE_MSIX);
698 src_readl(dev, MUnit.OMR);
699 }
700
aac_dump_fw_fib_iop_reset(struct aac_dev * dev)701 static void aac_dump_fw_fib_iop_reset(struct aac_dev *dev)
702 {
703 __le32 supported_options3;
704
705 if (!aac_fib_dump)
706 return;
707
708 supported_options3 = dev->supplement_adapter_info.supported_options3;
709 if (!(supported_options3 & AAC_OPTION_SUPPORTED3_IOP_RESET_FIB_DUMP))
710 return;
711
712 aac_adapter_sync_cmd(dev, IOP_RESET_FW_FIB_DUMP,
713 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
714 }
715
aac_is_ctrl_up_and_running(struct aac_dev * dev)716 static bool aac_is_ctrl_up_and_running(struct aac_dev *dev)
717 {
718 bool ctrl_up = true;
719 unsigned long status, start;
720 bool is_up = false;
721
722 start = jiffies;
723 do {
724 schedule();
725 status = src_readl(dev, MUnit.OMR);
726
727 if (status == 0xffffffff)
728 status = 0;
729
730 if (status & KERNEL_BOOTING) {
731 start = jiffies;
732 continue;
733 }
734
735 if (time_after(jiffies, start+HZ*SOFT_RESET_TIME)) {
736 ctrl_up = false;
737 break;
738 }
739
740 is_up = status & KERNEL_UP_AND_RUNNING;
741
742 } while (!is_up);
743
744 return ctrl_up;
745 }
746
aac_src_drop_io(struct aac_dev * dev)747 static void aac_src_drop_io(struct aac_dev *dev)
748 {
749 if (!dev->soft_reset_support)
750 return;
751
752 aac_adapter_sync_cmd(dev, DROP_IO,
753 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
754 }
755
aac_notify_fw_of_iop_reset(struct aac_dev * dev)756 static void aac_notify_fw_of_iop_reset(struct aac_dev *dev)
757 {
758 aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, NULL,
759 NULL, NULL, NULL, NULL);
760 aac_src_drop_io(dev);
761 }
762
aac_send_iop_reset(struct aac_dev * dev)763 static void aac_send_iop_reset(struct aac_dev *dev)
764 {
765 aac_dump_fw_fib_iop_reset(dev);
766
767 aac_notify_fw_of_iop_reset(dev);
768
769 aac_set_intx_mode(dev);
770
771 aac_clear_omr(dev);
772
773 src_writel(dev, MUnit.IDR, IOP_SRC_RESET_MASK);
774
775 msleep(5000);
776 }
777
aac_send_hardware_soft_reset(struct aac_dev * dev)778 static void aac_send_hardware_soft_reset(struct aac_dev *dev)
779 {
780 u_int32_t val;
781
782 aac_clear_omr(dev);
783 val = readl(((char *)(dev->base) + IBW_SWR_OFFSET));
784 val |= 0x01;
785 writel(val, ((char *)(dev->base) + IBW_SWR_OFFSET));
786 msleep_interruptible(20000);
787 }
788
aac_src_restart_adapter(struct aac_dev * dev,int bled,u8 reset_type)789 static int aac_src_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
790 {
791 bool is_ctrl_up;
792 int ret = 0;
793
794 if (bled < 0)
795 goto invalid_out;
796
797 if (bled)
798 dev_err(&dev->pdev->dev, "adapter kernel panic'd %x.\n", bled);
799
800 /*
801 * When there is a BlinkLED, IOP_RESET has not effect
802 */
803 if (bled >= 2 && dev->sa_firmware && reset_type & HW_IOP_RESET)
804 reset_type &= ~HW_IOP_RESET;
805
806 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
807
808 dev_err(&dev->pdev->dev, "Controller reset type is %d\n", reset_type);
809
810 if (reset_type & HW_IOP_RESET) {
811 dev_info(&dev->pdev->dev, "Issuing IOP reset\n");
812 aac_send_iop_reset(dev);
813
814 /*
815 * Creates a delay or wait till up and running comes thru
816 */
817 is_ctrl_up = aac_is_ctrl_up_and_running(dev);
818 if (!is_ctrl_up)
819 dev_err(&dev->pdev->dev, "IOP reset failed\n");
820 else {
821 dev_info(&dev->pdev->dev, "IOP reset succeeded\n");
822 goto set_startup;
823 }
824 }
825
826 if (!dev->sa_firmware) {
827 dev_err(&dev->pdev->dev, "ARC Reset attempt failed\n");
828 ret = -ENODEV;
829 goto out;
830 }
831
832 if (reset_type & HW_SOFT_RESET) {
833 dev_info(&dev->pdev->dev, "Issuing SOFT reset\n");
834 aac_send_hardware_soft_reset(dev);
835 dev->msi_enabled = 0;
836
837 is_ctrl_up = aac_is_ctrl_up_and_running(dev);
838 if (!is_ctrl_up) {
839 dev_err(&dev->pdev->dev, "SOFT reset failed\n");
840 ret = -ENODEV;
841 goto out;
842 } else
843 dev_info(&dev->pdev->dev, "SOFT reset succeeded\n");
844 }
845
846 set_startup:
847 if (startup_timeout < 300)
848 startup_timeout = 300;
849
850 out:
851 return ret;
852
853 invalid_out:
854 if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
855 ret = -ENODEV;
856 goto out;
857 }
858
859 /**
860 * aac_src_select_comm - Select communications method
861 * @dev: Adapter
862 * @comm: communications method
863 */
aac_src_select_comm(struct aac_dev * dev,int comm)864 static int aac_src_select_comm(struct aac_dev *dev, int comm)
865 {
866 switch (comm) {
867 case AAC_COMM_MESSAGE:
868 dev->a_ops.adapter_intr = aac_src_intr_message;
869 dev->a_ops.adapter_deliver = aac_src_deliver_message;
870 break;
871 default:
872 return 1;
873 }
874 return 0;
875 }
876
877 /**
878 * aac_src_init - initialize an Cardinal Frey Bar card
879 * @dev: device to configure
880 *
881 */
882
aac_src_init(struct aac_dev * dev)883 int aac_src_init(struct aac_dev *dev)
884 {
885 unsigned long start;
886 unsigned long status;
887 int restart = 0;
888 int instance = dev->id;
889 const char *name = dev->name;
890
891 dev->a_ops.adapter_ioremap = aac_src_ioremap;
892 dev->a_ops.adapter_comm = aac_src_select_comm;
893
894 dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
895 if (aac_adapter_ioremap(dev, dev->base_size)) {
896 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
897 goto error_iounmap;
898 }
899
900 /* Failure to reset here is an option ... */
901 dev->a_ops.adapter_sync_cmd = src_sync_cmd;
902 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
903
904 if (dev->init_reset) {
905 dev->init_reset = false;
906 if (!aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET))
907 ++restart;
908 }
909
910 /*
911 * Check to see if the board panic'd while booting.
912 */
913 status = src_readl(dev, MUnit.OMR);
914 if (status & KERNEL_PANIC) {
915 if (aac_src_restart_adapter(dev,
916 aac_src_check_health(dev), IOP_HWSOFT_RESET))
917 goto error_iounmap;
918 ++restart;
919 }
920 /*
921 * Check to see if the board failed any self tests.
922 */
923 status = src_readl(dev, MUnit.OMR);
924 if (status & SELF_TEST_FAILED) {
925 printk(KERN_ERR "%s%d: adapter self-test failed.\n",
926 dev->name, instance);
927 goto error_iounmap;
928 }
929 /*
930 * Check to see if the monitor panic'd while booting.
931 */
932 if (status & MONITOR_PANIC) {
933 printk(KERN_ERR "%s%d: adapter monitor panic.\n",
934 dev->name, instance);
935 goto error_iounmap;
936 }
937 start = jiffies;
938 /*
939 * Wait for the adapter to be up and running. Wait up to 3 minutes
940 */
941 while (!((status = src_readl(dev, MUnit.OMR)) &
942 KERNEL_UP_AND_RUNNING)) {
943 if ((restart &&
944 (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
945 time_after(jiffies, start+HZ*startup_timeout)) {
946 printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
947 dev->name, instance, status);
948 goto error_iounmap;
949 }
950 if (!restart &&
951 ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
952 time_after(jiffies, start + HZ *
953 ((startup_timeout > 60)
954 ? (startup_timeout - 60)
955 : (startup_timeout / 2))))) {
956 if (likely(!aac_src_restart_adapter(dev,
957 aac_src_check_health(dev), IOP_HWSOFT_RESET)))
958 start = jiffies;
959 ++restart;
960 }
961 msleep(1);
962 }
963 if (restart && aac_commit)
964 aac_commit = 1;
965 /*
966 * Fill in the common function dispatch table.
967 */
968 dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
969 dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
970 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
971 dev->a_ops.adapter_notify = aac_src_notify_adapter;
972 dev->a_ops.adapter_sync_cmd = src_sync_cmd;
973 dev->a_ops.adapter_check_health = aac_src_check_health;
974 dev->a_ops.adapter_restart = aac_src_restart_adapter;
975 dev->a_ops.adapter_start = aac_src_start_adapter;
976
977 /*
978 * First clear out all interrupts. Then enable the one's that we
979 * can handle.
980 */
981 aac_adapter_comm(dev, AAC_COMM_MESSAGE);
982 aac_adapter_disable_int(dev);
983 src_writel(dev, MUnit.ODR_C, 0xffffffff);
984 aac_adapter_enable_int(dev);
985
986 if (aac_init_adapter(dev) == NULL)
987 goto error_iounmap;
988 if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
989 goto error_iounmap;
990
991 dev->msi = !pci_enable_msi(dev->pdev);
992
993 dev->aac_msix[0].vector_no = 0;
994 dev->aac_msix[0].dev = dev;
995
996 if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
997 IRQF_SHARED, "aacraid", &(dev->aac_msix[0])) < 0) {
998
999 if (dev->msi)
1000 pci_disable_msi(dev->pdev);
1001
1002 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
1003 name, instance);
1004 goto error_iounmap;
1005 }
1006 dev->dbg_base = pci_resource_start(dev->pdev, 2);
1007 dev->dbg_base_mapped = dev->regs.src.bar1;
1008 dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
1009 dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
1010
1011 aac_adapter_enable_int(dev);
1012
1013 if (!dev->sync_mode) {
1014 /*
1015 * Tell the adapter that all is configured, and it can
1016 * start accepting requests
1017 */
1018 aac_src_start_adapter(dev);
1019 }
1020 return 0;
1021
1022 error_iounmap:
1023
1024 return -1;
1025 }
1026
aac_src_wait_sync(struct aac_dev * dev,int * status)1027 static int aac_src_wait_sync(struct aac_dev *dev, int *status)
1028 {
1029 unsigned long start = jiffies;
1030 unsigned long usecs = 0;
1031 int delay = 5 * HZ;
1032 int rc = 1;
1033
1034 while (time_before(jiffies, start+delay)) {
1035 /*
1036 * Delay 5 microseconds to let Mon960 get info.
1037 */
1038 udelay(5);
1039
1040 /*
1041 * Mon960 will set doorbell0 bit when it has completed the
1042 * command.
1043 */
1044 if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
1045 /*
1046 * Clear: the doorbell.
1047 */
1048 if (dev->msi_enabled)
1049 aac_src_access_devreg(dev, AAC_CLEAR_SYNC_BIT);
1050 else
1051 src_writel(dev, MUnit.ODR_C,
1052 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
1053 rc = 0;
1054
1055 break;
1056 }
1057
1058 /*
1059 * Yield the processor in case we are slow
1060 */
1061 usecs = 1 * USEC_PER_MSEC;
1062 usleep_range(usecs, usecs + 50);
1063 }
1064 /*
1065 * Pull the synch status from Mailbox 0.
1066 */
1067 if (status && !rc) {
1068 status[0] = readl(&dev->IndexRegs->Mailbox[0]);
1069 status[1] = readl(&dev->IndexRegs->Mailbox[1]);
1070 status[2] = readl(&dev->IndexRegs->Mailbox[2]);
1071 status[3] = readl(&dev->IndexRegs->Mailbox[3]);
1072 status[4] = readl(&dev->IndexRegs->Mailbox[4]);
1073 }
1074
1075 return rc;
1076 }
1077
1078 /**
1079 * aac_src_soft_reset - perform soft reset to speed up
1080 * access
1081 *
1082 * Assumptions: That the controller is in a state where we can
1083 * bring it back to life with an init struct. We can only use
1084 * fast sync commands, as the timeout is 5 seconds.
1085 *
1086 * @dev: device to configure
1087 *
1088 */
1089
aac_src_soft_reset(struct aac_dev * dev)1090 static int aac_src_soft_reset(struct aac_dev *dev)
1091 {
1092 u32 status_omr = src_readl(dev, MUnit.OMR);
1093 u32 status[5];
1094 int rc = 1;
1095 int state = 0;
1096 char *state_str[7] = {
1097 "GET_ADAPTER_PROPERTIES Failed",
1098 "GET_ADAPTER_PROPERTIES timeout",
1099 "SOFT_RESET not supported",
1100 "DROP_IO Failed",
1101 "DROP_IO timeout",
1102 "Check Health failed"
1103 };
1104
1105 if (status_omr == INVALID_OMR)
1106 return 1; // pcie hosed
1107
1108 if (!(status_omr & KERNEL_UP_AND_RUNNING))
1109 return 1; // not up and running
1110
1111 /*
1112 * We go into soft reset mode to allow us to handle response
1113 */
1114 dev->in_soft_reset = 1;
1115 dev->msi_enabled = status_omr & AAC_INT_MODE_MSIX;
1116
1117 /* Get adapter properties */
1118 rc = aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0,
1119 0, 0, 0, status+0, status+1, status+2, status+3, status+4);
1120 if (rc)
1121 goto out;
1122
1123 state++;
1124 if (aac_src_wait_sync(dev, status)) {
1125 rc = 1;
1126 goto out;
1127 }
1128
1129 state++;
1130 if (!(status[1] & le32_to_cpu(AAC_OPT_EXTENDED) &&
1131 (status[4] & le32_to_cpu(AAC_EXTOPT_SOFT_RESET)))) {
1132 rc = 2;
1133 goto out;
1134 }
1135
1136 if ((status[1] & le32_to_cpu(AAC_OPT_EXTENDED)) &&
1137 (status[4] & le32_to_cpu(AAC_EXTOPT_SA_FIRMWARE)))
1138 dev->sa_firmware = 1;
1139
1140 state++;
1141 rc = aac_adapter_sync_cmd(dev, DROP_IO, 0, 0, 0, 0, 0, 0,
1142 status+0, status+1, status+2, status+3, status+4);
1143
1144 if (rc)
1145 goto out;
1146
1147 state++;
1148 if (aac_src_wait_sync(dev, status)) {
1149 rc = 3;
1150 goto out;
1151 }
1152
1153 if (status[1])
1154 dev_err(&dev->pdev->dev, "%s: %d outstanding I/O pending\n",
1155 __func__, status[1]);
1156
1157 state++;
1158 rc = aac_src_check_health(dev);
1159
1160 out:
1161 dev->in_soft_reset = 0;
1162 dev->msi_enabled = 0;
1163 if (rc)
1164 dev_err(&dev->pdev->dev, "%s: %s status = %d", __func__,
1165 state_str[state], rc);
1166
1167 return rc;
1168 }
1169 /**
1170 * aac_srcv_init - initialize an SRCv card
1171 * @dev: device to configure
1172 *
1173 */
1174
aac_srcv_init(struct aac_dev * dev)1175 int aac_srcv_init(struct aac_dev *dev)
1176 {
1177 unsigned long start;
1178 unsigned long status;
1179 int restart = 0;
1180 int instance = dev->id;
1181 const char *name = dev->name;
1182
1183 dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
1184 dev->a_ops.adapter_comm = aac_src_select_comm;
1185
1186 dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
1187 if (aac_adapter_ioremap(dev, dev->base_size)) {
1188 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
1189 goto error_iounmap;
1190 }
1191
1192 /* Failure to reset here is an option ... */
1193 dev->a_ops.adapter_sync_cmd = src_sync_cmd;
1194 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
1195
1196 if (dev->init_reset) {
1197 dev->init_reset = false;
1198 if (aac_src_soft_reset(dev)) {
1199 aac_src_restart_adapter(dev, 0, IOP_HWSOFT_RESET);
1200 ++restart;
1201 }
1202 }
1203
1204 /*
1205 * Check to see if flash update is running.
1206 * Wait for the adapter to be up and running. Wait up to 5 minutes
1207 */
1208 status = src_readl(dev, MUnit.OMR);
1209 if (status & FLASH_UPD_PENDING) {
1210 start = jiffies;
1211 do {
1212 status = src_readl(dev, MUnit.OMR);
1213 if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
1214 printk(KERN_ERR "%s%d: adapter flash update failed.\n",
1215 dev->name, instance);
1216 goto error_iounmap;
1217 }
1218 } while (!(status & FLASH_UPD_SUCCESS) &&
1219 !(status & FLASH_UPD_FAILED));
1220 /* Delay 10 seconds.
1221 * Because right now FW is doing a soft reset,
1222 * do not read scratch pad register at this time
1223 */
1224 ssleep(10);
1225 }
1226 /*
1227 * Check to see if the board panic'd while booting.
1228 */
1229 status = src_readl(dev, MUnit.OMR);
1230 if (status & KERNEL_PANIC) {
1231 if (aac_src_restart_adapter(dev,
1232 aac_src_check_health(dev), IOP_HWSOFT_RESET))
1233 goto error_iounmap;
1234 ++restart;
1235 }
1236 /*
1237 * Check to see if the board failed any self tests.
1238 */
1239 status = src_readl(dev, MUnit.OMR);
1240 if (status & SELF_TEST_FAILED) {
1241 printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
1242 goto error_iounmap;
1243 }
1244 /*
1245 * Check to see if the monitor panic'd while booting.
1246 */
1247 if (status & MONITOR_PANIC) {
1248 printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
1249 goto error_iounmap;
1250 }
1251
1252 start = jiffies;
1253 /*
1254 * Wait for the adapter to be up and running. Wait up to 3 minutes
1255 */
1256 do {
1257 status = src_readl(dev, MUnit.OMR);
1258 if (status == INVALID_OMR)
1259 status = 0;
1260
1261 if ((restart &&
1262 (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
1263 time_after(jiffies, start+HZ*startup_timeout)) {
1264 printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
1265 dev->name, instance, status);
1266 goto error_iounmap;
1267 }
1268 if (!restart &&
1269 ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
1270 time_after(jiffies, start + HZ *
1271 ((startup_timeout > 60)
1272 ? (startup_timeout - 60)
1273 : (startup_timeout / 2))))) {
1274 if (likely(!aac_src_restart_adapter(dev,
1275 aac_src_check_health(dev), IOP_HWSOFT_RESET)))
1276 start = jiffies;
1277 ++restart;
1278 }
1279 msleep(1);
1280 } while (!(status & KERNEL_UP_AND_RUNNING));
1281
1282 if (restart && aac_commit)
1283 aac_commit = 1;
1284 /*
1285 * Fill in the common function dispatch table.
1286 */
1287 dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
1288 dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
1289 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
1290 dev->a_ops.adapter_notify = aac_src_notify_adapter;
1291 dev->a_ops.adapter_sync_cmd = src_sync_cmd;
1292 dev->a_ops.adapter_check_health = aac_src_check_health;
1293 dev->a_ops.adapter_restart = aac_src_restart_adapter;
1294 dev->a_ops.adapter_start = aac_src_start_adapter;
1295
1296 /*
1297 * First clear out all interrupts. Then enable the one's that we
1298 * can handle.
1299 */
1300 aac_adapter_comm(dev, AAC_COMM_MESSAGE);
1301 aac_adapter_disable_int(dev);
1302 src_writel(dev, MUnit.ODR_C, 0xffffffff);
1303 aac_adapter_enable_int(dev);
1304
1305 if (aac_init_adapter(dev) == NULL)
1306 goto error_iounmap;
1307 if ((dev->comm_interface != AAC_COMM_MESSAGE_TYPE2) &&
1308 (dev->comm_interface != AAC_COMM_MESSAGE_TYPE3))
1309 goto error_iounmap;
1310 if (dev->msi_enabled)
1311 aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
1312
1313 if (aac_acquire_irq(dev))
1314 goto error_iounmap;
1315
1316 dev->dbg_base = pci_resource_start(dev->pdev, 2);
1317 dev->dbg_base_mapped = dev->regs.src.bar1;
1318 dev->dbg_size = AAC_MIN_SRCV_BAR1_SIZE;
1319 dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
1320
1321 aac_adapter_enable_int(dev);
1322
1323 if (!dev->sync_mode) {
1324 /*
1325 * Tell the adapter that all is configured, and it can
1326 * start accepting requests
1327 */
1328 aac_src_start_adapter(dev);
1329 }
1330 return 0;
1331
1332 error_iounmap:
1333
1334 return -1;
1335 }
1336
aac_src_access_devreg(struct aac_dev * dev,int mode)1337 void aac_src_access_devreg(struct aac_dev *dev, int mode)
1338 {
1339 u_int32_t val;
1340
1341 switch (mode) {
1342 case AAC_ENABLE_INTERRUPT:
1343 src_writel(dev,
1344 MUnit.OIMR,
1345 dev->OIMR = (dev->msi_enabled ?
1346 AAC_INT_ENABLE_TYPE1_MSIX :
1347 AAC_INT_ENABLE_TYPE1_INTX));
1348 break;
1349
1350 case AAC_DISABLE_INTERRUPT:
1351 src_writel(dev,
1352 MUnit.OIMR,
1353 dev->OIMR = AAC_INT_DISABLE_ALL);
1354 break;
1355
1356 case AAC_ENABLE_MSIX:
1357 /* set bit 6 */
1358 val = src_readl(dev, MUnit.IDR);
1359 val |= 0x40;
1360 src_writel(dev, MUnit.IDR, val);
1361 src_readl(dev, MUnit.IDR);
1362 /* unmask int. */
1363 val = PMC_ALL_INTERRUPT_BITS;
1364 src_writel(dev, MUnit.IOAR, val);
1365 val = src_readl(dev, MUnit.OIMR);
1366 src_writel(dev,
1367 MUnit.OIMR,
1368 val & (~(PMC_GLOBAL_INT_BIT2 | PMC_GLOBAL_INT_BIT0)));
1369 break;
1370
1371 case AAC_DISABLE_MSIX:
1372 /* reset bit 6 */
1373 val = src_readl(dev, MUnit.IDR);
1374 val &= ~0x40;
1375 src_writel(dev, MUnit.IDR, val);
1376 src_readl(dev, MUnit.IDR);
1377 break;
1378
1379 case AAC_CLEAR_AIF_BIT:
1380 /* set bit 5 */
1381 val = src_readl(dev, MUnit.IDR);
1382 val |= 0x20;
1383 src_writel(dev, MUnit.IDR, val);
1384 src_readl(dev, MUnit.IDR);
1385 break;
1386
1387 case AAC_CLEAR_SYNC_BIT:
1388 /* set bit 4 */
1389 val = src_readl(dev, MUnit.IDR);
1390 val |= 0x10;
1391 src_writel(dev, MUnit.IDR, val);
1392 src_readl(dev, MUnit.IDR);
1393 break;
1394
1395 case AAC_ENABLE_INTX:
1396 /* set bit 7 */
1397 val = src_readl(dev, MUnit.IDR);
1398 val |= 0x80;
1399 src_writel(dev, MUnit.IDR, val);
1400 src_readl(dev, MUnit.IDR);
1401 /* unmask int. */
1402 val = PMC_ALL_INTERRUPT_BITS;
1403 src_writel(dev, MUnit.IOAR, val);
1404 src_readl(dev, MUnit.IOAR);
1405 val = src_readl(dev, MUnit.OIMR);
1406 src_writel(dev, MUnit.OIMR,
1407 val & (~(PMC_GLOBAL_INT_BIT2)));
1408 break;
1409
1410 default:
1411 break;
1412 }
1413 }
1414
aac_src_get_sync_status(struct aac_dev * dev)1415 static int aac_src_get_sync_status(struct aac_dev *dev)
1416 {
1417 int msix_val = 0;
1418 int legacy_val = 0;
1419
1420 msix_val = src_readl(dev, MUnit.ODR_MSI) & SRC_MSI_READ_MASK ? 1 : 0;
1421
1422 if (!dev->msi_enabled) {
1423 /*
1424 * if Legacy int status indicates cmd is not complete
1425 * sample MSIx register to see if it indiactes cmd complete,
1426 * if yes set the controller in MSIx mode and consider cmd
1427 * completed
1428 */
1429 legacy_val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
1430 if (!(legacy_val & 1) && msix_val)
1431 dev->msi_enabled = 1;
1432 return legacy_val;
1433 }
1434
1435 return msix_val;
1436 }
1437