1// SPDX-License-Identifier: GPL-2.0 2#include "qcom-msm8974.dtsi" 3#include "qcom-pm8841.dtsi" 4#include "qcom-pm8941.dtsi" 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/input/input.h> 7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 8 9/ { 10 model = "Sony Xperia Z1 Compact"; 11 compatible = "sony,xperia-amami", "qcom,msm8974"; 12 13 aliases { 14 serial0 = &blsp1_uart2; 15 }; 16 17 chosen { 18 stdout-path = "serial0:115200n8"; 19 }; 20 21 gpio-keys { 22 compatible = "gpio-keys"; 23 input-name = "gpio-keys"; 24 25 pinctrl-names = "default"; 26 pinctrl-0 = <&gpio_keys_pin_a>; 27 28 volume-down { 29 label = "volume_down"; 30 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; 31 linux,input-type = <1>; 32 linux,code = <KEY_VOLUMEDOWN>; 33 }; 34 35 camera-snapshot { 36 label = "camera_snapshot"; 37 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; 38 linux,input-type = <1>; 39 linux,code = <KEY_CAMERA>; 40 }; 41 42 camera-focus { 43 label = "camera_focus"; 44 gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; 45 linux,input-type = <1>; 46 linux,code = <KEY_CAMERA_FOCUS>; 47 }; 48 49 volume-up { 50 label = "volume_up"; 51 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; 52 linux,input-type = <1>; 53 linux,code = <KEY_VOLUMEUP>; 54 }; 55 }; 56 57 memory@0 { 58 reg = <0 0x40000000>, <0x40000000 0x40000000>; 59 device_type = "memory"; 60 }; 61 62 smd { 63 rpm { 64 rpm_requests { 65 pm8841-regulators { 66 s1 { 67 regulator-min-microvolt = <675000>; 68 regulator-max-microvolt = <1050000>; 69 }; 70 71 s2 { 72 regulator-min-microvolt = <500000>; 73 regulator-max-microvolt = <1050000>; 74 }; 75 76 s3 { 77 regulator-min-microvolt = <500000>; 78 regulator-max-microvolt = <1050000>; 79 }; 80 81 s4 { 82 regulator-min-microvolt = <500000>; 83 regulator-max-microvolt = <1050000>; 84 }; 85 }; 86 87 pm8941-regulators { 88 vdd_l1_l3-supply = <&pm8941_s1>; 89 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; 90 vdd_l4_l11-supply = <&pm8941_s1>; 91 vdd_l5_l7-supply = <&pm8941_s2>; 92 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; 93 vdd_l9_l10_l17_l22-supply = <&vreg_boost>; 94 vdd_l13_l20_l23_l24-supply = <&vreg_boost>; 95 vdd_l21-supply = <&vreg_boost>; 96 97 s1 { 98 regulator-min-microvolt = <1300000>; 99 regulator-max-microvolt = <1300000>; 100 regulator-always-on; 101 regulator-boot-on; 102 }; 103 104 s2 { 105 regulator-min-microvolt = <2150000>; 106 regulator-max-microvolt = <2150000>; 107 regulator-boot-on; 108 }; 109 110 s3 { 111 regulator-min-microvolt = <1800000>; 112 regulator-max-microvolt = <1800000>; 113 regulator-always-on; 114 regulator-boot-on; 115 }; 116 117 s4 { 118 regulator-min-microvolt = <5000000>; 119 regulator-max-microvolt = <5000000>; 120 }; 121 122 l1 { 123 regulator-min-microvolt = <1225000>; 124 regulator-max-microvolt = <1225000>; 125 126 regulator-always-on; 127 regulator-boot-on; 128 }; 129 130 l2 { 131 regulator-min-microvolt = <1200000>; 132 regulator-max-microvolt = <1200000>; 133 }; 134 135 l3 { 136 regulator-min-microvolt = <1200000>; 137 regulator-max-microvolt = <1200000>; 138 }; 139 140 l4 { 141 regulator-min-microvolt = <1225000>; 142 regulator-max-microvolt = <1225000>; 143 }; 144 145 l5 { 146 regulator-min-microvolt = <1800000>; 147 regulator-max-microvolt = <1800000>; 148 }; 149 150 l6 { 151 regulator-min-microvolt = <1800000>; 152 regulator-max-microvolt = <1800000>; 153 154 regulator-boot-on; 155 }; 156 157 l7 { 158 regulator-min-microvolt = <1800000>; 159 regulator-max-microvolt = <1800000>; 160 161 regulator-boot-on; 162 }; 163 164 l8 { 165 regulator-min-microvolt = <1800000>; 166 regulator-max-microvolt = <1800000>; 167 }; 168 169 l9 { 170 regulator-min-microvolt = <1800000>; 171 regulator-max-microvolt = <2950000>; 172 }; 173 174 l11 { 175 regulator-min-microvolt = <1300000>; 176 regulator-max-microvolt = <1350000>; 177 }; 178 179 l12 { 180 regulator-min-microvolt = <1800000>; 181 regulator-max-microvolt = <1800000>; 182 183 regulator-always-on; 184 regulator-boot-on; 185 }; 186 187 l13 { 188 regulator-min-microvolt = <1800000>; 189 regulator-max-microvolt = <2950000>; 190 191 regulator-boot-on; 192 }; 193 194 l14 { 195 regulator-min-microvolt = <1800000>; 196 regulator-max-microvolt = <1800000>; 197 }; 198 199 l15 { 200 regulator-min-microvolt = <2050000>; 201 regulator-max-microvolt = <2050000>; 202 }; 203 204 l16 { 205 regulator-min-microvolt = <2700000>; 206 regulator-max-microvolt = <2700000>; 207 }; 208 209 l17 { 210 regulator-min-microvolt = <2700000>; 211 regulator-max-microvolt = <2700000>; 212 }; 213 214 l18 { 215 regulator-min-microvolt = <2850000>; 216 regulator-max-microvolt = <2850000>; 217 }; 218 219 l19 { 220 regulator-min-microvolt = <3300000>; 221 regulator-max-microvolt = <3300000>; 222 }; 223 224 l20 { 225 regulator-min-microvolt = <2950000>; 226 regulator-max-microvolt = <2950000>; 227 228 regulator-allow-set-load; 229 regulator-boot-on; 230 regulator-system-load = <200000>; 231 }; 232 233 l21 { 234 regulator-min-microvolt = <2950000>; 235 regulator-max-microvolt = <2950000>; 236 237 regulator-boot-on; 238 }; 239 240 l22 { 241 regulator-min-microvolt = <3000000>; 242 regulator-max-microvolt = <3000000>; 243 }; 244 245 l23 { 246 regulator-min-microvolt = <2800000>; 247 regulator-max-microvolt = <2800000>; 248 }; 249 250 l24 { 251 regulator-min-microvolt = <3075000>; 252 regulator-max-microvolt = <3075000>; 253 254 regulator-boot-on; 255 }; 256 }; 257 }; 258 }; 259 }; 260}; 261 262&soc { 263 sdhci@f9824900 { 264 status = "okay"; 265 266 vmmc-supply = <&pm8941_l20>; 267 vqmmc-supply = <&pm8941_s3>; 268 269 bus-width = <8>; 270 non-removable; 271 272 pinctrl-names = "default"; 273 pinctrl-0 = <&sdhc1_pin_a>; 274 }; 275 276 sdhci@f98a4900 { 277 status = "okay"; 278 279 bus-width = <4>; 280 281 vmmc-supply = <&pm8941_l21>; 282 vqmmc-supply = <&pm8941_l13>; 283 284 cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; 285 286 pinctrl-names = "default"; 287 pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; 288 }; 289 290 serial@f991e000 { 291 status = "okay"; 292 293 pinctrl-names = "default"; 294 pinctrl-0 = <&blsp1_uart2_pin_a>; 295 }; 296 297 298 pinctrl@fd510000 { 299 blsp1_uart2_pin_a: blsp1-uart2-pin-active { 300 rx { 301 pins = "gpio5"; 302 function = "blsp_uart2"; 303 304 drive-strength = <2>; 305 bias-pull-up; 306 }; 307 308 tx { 309 pins = "gpio4"; 310 function = "blsp_uart2"; 311 312 drive-strength = <4>; 313 bias-disable; 314 }; 315 }; 316 317 i2c2_pins: i2c2 { 318 mux { 319 pins = "gpio6", "gpio7"; 320 function = "blsp_i2c2"; 321 322 drive-strength = <2>; 323 bias-disable; 324 }; 325 }; 326 327 sdhc1_pin_a: sdhc1-pin-active { 328 clk { 329 pins = "sdc1_clk"; 330 drive-strength = <16>; 331 bias-disable; 332 }; 333 334 cmd-data { 335 pins = "sdc1_cmd", "sdc1_data"; 336 drive-strength = <10>; 337 bias-pull-up; 338 }; 339 }; 340 341 sdhc2_cd_pin_a: sdhc2-cd-pin-active { 342 pins = "gpio62"; 343 function = "gpio"; 344 345 drive-strength = <2>; 346 bias-disable; 347 }; 348 349 sdhc2_pin_a: sdhc2-pin-active { 350 clk { 351 pins = "sdc2_clk"; 352 drive-strength = <10>; 353 bias-disable; 354 }; 355 356 cmd-data { 357 pins = "sdc2_cmd", "sdc2_data"; 358 drive-strength = <6>; 359 bias-pull-up; 360 }; 361 }; 362 }; 363 364 dma-controller@f9944000 { 365 qcom,controlled-remotely; 366 }; 367 368 usb@f9a55000 { 369 status = "okay"; 370 371 phys = <&usb_hs1_phy>; 372 phy-select = <&tcsr 0xb000 0>; 373 extcon = <&smbb>, <&usb_id>; 374 vbus-supply = <&chg_otg>; 375 376 hnp-disable; 377 srp-disable; 378 adp-disable; 379 380 ulpi { 381 phy@a { 382 status = "okay"; 383 384 v1p8-supply = <&pm8941_l6>; 385 v3p3-supply = <&pm8941_l24>; 386 387 extcon = <&smbb>; 388 qcom,init-seq = /bits/ 8 <0x1 0x64>; 389 }; 390 }; 391 }; 392}; 393 394&spmi_bus { 395 pm8941@0 { 396 charger@1000 { 397 qcom,fast-charge-safe-current = <1300000>; 398 qcom,fast-charge-current-limit = <1300000>; 399 qcom,dc-current-limit = <1300000>; 400 qcom,fast-charge-safe-voltage = <4400000>; 401 qcom,fast-charge-high-threshold-voltage = <4350000>; 402 qcom,fast-charge-low-threshold-voltage = <3400000>; 403 qcom,auto-recharge-threshold-voltage = <4200000>; 404 qcom,minimum-input-voltage = <4300000>; 405 }; 406 407 gpios@c000 { 408 gpio_keys_pin_a: gpio-keys-active { 409 pins = "gpio2", "gpio3", "gpio4", "gpio5"; 410 function = "normal"; 411 412 bias-pull-up; 413 power-source = <PM8941_GPIO_S3>; 414 }; 415 }; 416 417 coincell@2800 { 418 status = "okay"; 419 qcom,rset-ohms = <2100>; 420 qcom,vset-millivolts = <3000>; 421 }; 422 }; 423 424 pm8941@1 { 425 wled@d800 { 426 status = "okay"; 427 428 qcom,cs-out; 429 qcom,current-limit = <20>; 430 qcom,current-boost-limit = <805>; 431 qcom,switching-freq = <1600>; 432 qcom,ovp = <29>; 433 qcom,num-strings = <2>; 434 }; 435 }; 436}; 437