1 // SPDX-License-Identifier: GPL-2.0
2 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
3
4 #include <linux/kernel.h>
5 #include <linux/export.h>
6 #include <linux/init.h>
7 #include <linux/memblock.h>
8 #include <linux/percpu.h>
9 #include <linux/kexec.h>
10 #include <linux/crash_dump.h>
11 #include <linux/smp.h>
12 #include <linux/topology.h>
13 #include <linux/pfn.h>
14 #include <asm/sections.h>
15 #include <asm/processor.h>
16 #include <asm/desc.h>
17 #include <asm/setup.h>
18 #include <asm/mpspec.h>
19 #include <asm/apicdef.h>
20 #include <asm/highmem.h>
21 #include <asm/proto.h>
22 #include <asm/cpumask.h>
23 #include <asm/cpu.h>
24 #include <asm/stackprotector.h>
25
26 DEFINE_PER_CPU_READ_MOSTLY(int, cpu_number);
27 EXPORT_PER_CPU_SYMBOL(cpu_number);
28
29 #ifdef CONFIG_X86_64
30 #define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
31 #else
32 #define BOOT_PERCPU_OFFSET 0
33 #endif
34
35 DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
36 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
37
38 unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init = {
39 [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
40 };
41 EXPORT_SYMBOL(__per_cpu_offset);
42
43 /*
44 * On x86_64 symbols referenced from code should be reachable using
45 * 32bit relocations. Reserve space for static percpu variables in
46 * modules so that they are always served from the first chunk which
47 * is located at the percpu segment base. On x86_32, anything can
48 * address anywhere. No need to reserve space in the first chunk.
49 */
50 #ifdef CONFIG_X86_64
51 #define PERCPU_FIRST_CHUNK_RESERVE PERCPU_MODULE_RESERVE
52 #else
53 #define PERCPU_FIRST_CHUNK_RESERVE 0
54 #endif
55
56 #ifdef CONFIG_X86_32
57 /**
58 * pcpu_need_numa - determine percpu allocation needs to consider NUMA
59 *
60 * If NUMA is not configured or there is only one NUMA node available,
61 * there is no reason to consider NUMA. This function determines
62 * whether percpu allocation should consider NUMA or not.
63 *
64 * RETURNS:
65 * true if NUMA should be considered; otherwise, false.
66 */
pcpu_need_numa(void)67 static bool __init pcpu_need_numa(void)
68 {
69 #ifdef CONFIG_NUMA
70 pg_data_t *last = NULL;
71 unsigned int cpu;
72
73 for_each_possible_cpu(cpu) {
74 int node = early_cpu_to_node(cpu);
75
76 if (node_online(node) && NODE_DATA(node) &&
77 last && last != NODE_DATA(node))
78 return true;
79
80 last = NODE_DATA(node);
81 }
82 #endif
83 return false;
84 }
85 #endif
86
87 /**
88 * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
89 * @cpu: cpu to allocate for
90 * @size: size allocation in bytes
91 * @align: alignment
92 *
93 * Allocate @size bytes aligned at @align for cpu @cpu. This wrapper
94 * does the right thing for NUMA regardless of the current
95 * configuration.
96 *
97 * RETURNS:
98 * Pointer to the allocated area on success, NULL on failure.
99 */
pcpu_alloc_bootmem(unsigned int cpu,unsigned long size,unsigned long align)100 static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
101 unsigned long align)
102 {
103 const unsigned long goal = __pa(MAX_DMA_ADDRESS);
104 #ifdef CONFIG_NUMA
105 int node = early_cpu_to_node(cpu);
106 void *ptr;
107
108 if (!node_online(node) || !NODE_DATA(node)) {
109 ptr = memblock_alloc_from(size, align, goal);
110 pr_info("cpu %d has no node %d or node-local memory\n",
111 cpu, node);
112 pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
113 cpu, size, __pa(ptr));
114 } else {
115 ptr = memblock_alloc_try_nid(size, align, goal,
116 MEMBLOCK_ALLOC_ACCESSIBLE,
117 node);
118
119 pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n",
120 cpu, size, node, __pa(ptr));
121 }
122 return ptr;
123 #else
124 return memblock_alloc_from(size, align, goal);
125 #endif
126 }
127
128 /*
129 * Helpers for first chunk memory allocation
130 */
pcpu_fc_alloc(unsigned int cpu,size_t size,size_t align)131 static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
132 {
133 return pcpu_alloc_bootmem(cpu, size, align);
134 }
135
pcpu_fc_free(void * ptr,size_t size)136 static void __init pcpu_fc_free(void *ptr, size_t size)
137 {
138 memblock_free_ptr(ptr, size);
139 }
140
pcpu_cpu_distance(unsigned int from,unsigned int to)141 static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
142 {
143 #ifdef CONFIG_NUMA
144 if (early_cpu_to_node(from) == early_cpu_to_node(to))
145 return LOCAL_DISTANCE;
146 else
147 return REMOTE_DISTANCE;
148 #else
149 return LOCAL_DISTANCE;
150 #endif
151 }
152
pcpup_populate_pte(unsigned long addr)153 static void __init pcpup_populate_pte(unsigned long addr)
154 {
155 populate_extra_pte(addr);
156 }
157
setup_percpu_segment(int cpu)158 static inline void setup_percpu_segment(int cpu)
159 {
160 #ifdef CONFIG_X86_32
161 struct desc_struct d = GDT_ENTRY_INIT(0x8092, per_cpu_offset(cpu),
162 0xFFFFF);
163
164 write_gdt_entry(get_cpu_gdt_rw(cpu), GDT_ENTRY_PERCPU, &d, DESCTYPE_S);
165 #endif
166 }
167
setup_per_cpu_areas(void)168 void __init setup_per_cpu_areas(void)
169 {
170 unsigned int cpu;
171 unsigned long delta;
172 int rc;
173
174 pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%u nr_node_ids:%u\n",
175 NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
176
177 /*
178 * Allocate percpu area. Embedding allocator is our favorite;
179 * however, on NUMA configurations, it can result in very
180 * sparse unit mapping and vmalloc area isn't spacious enough
181 * on 32bit. Use page in that case.
182 */
183 #ifdef CONFIG_X86_32
184 if (pcpu_chosen_fc == PCPU_FC_AUTO && pcpu_need_numa())
185 pcpu_chosen_fc = PCPU_FC_PAGE;
186 #endif
187 rc = -EINVAL;
188 if (pcpu_chosen_fc != PCPU_FC_PAGE) {
189 const size_t dyn_size = PERCPU_MODULE_RESERVE +
190 PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
191 size_t atom_size;
192
193 /*
194 * On 64bit, use PMD_SIZE for atom_size so that embedded
195 * percpu areas are aligned to PMD. This, in the future,
196 * can also allow using PMD mappings in vmalloc area. Use
197 * PAGE_SIZE on 32bit as vmalloc space is highly contended
198 * and large vmalloc area allocs can easily fail.
199 */
200 #ifdef CONFIG_X86_64
201 atom_size = PMD_SIZE;
202 #else
203 atom_size = PAGE_SIZE;
204 #endif
205 rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
206 dyn_size, atom_size,
207 pcpu_cpu_distance,
208 pcpu_fc_alloc, pcpu_fc_free);
209 if (rc < 0)
210 pr_warn("%s allocator failed (%d), falling back to page size\n",
211 pcpu_fc_names[pcpu_chosen_fc], rc);
212 }
213 if (rc < 0)
214 rc = pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
215 pcpu_fc_alloc, pcpu_fc_free,
216 pcpup_populate_pte);
217 if (rc < 0)
218 panic("cannot initialize percpu area (err=%d)", rc);
219
220 /* alrighty, percpu areas up and running */
221 delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
222 for_each_possible_cpu(cpu) {
223 per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
224 per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
225 per_cpu(cpu_number, cpu) = cpu;
226 setup_percpu_segment(cpu);
227 /*
228 * Copy data used in early init routines from the
229 * initial arrays to the per cpu data areas. These
230 * arrays then become expendable and the *_early_ptr's
231 * are zeroed indicating that the static arrays are
232 * gone.
233 */
234 #ifdef CONFIG_X86_LOCAL_APIC
235 per_cpu(x86_cpu_to_apicid, cpu) =
236 early_per_cpu_map(x86_cpu_to_apicid, cpu);
237 per_cpu(x86_bios_cpu_apicid, cpu) =
238 early_per_cpu_map(x86_bios_cpu_apicid, cpu);
239 per_cpu(x86_cpu_to_acpiid, cpu) =
240 early_per_cpu_map(x86_cpu_to_acpiid, cpu);
241 #endif
242 #ifdef CONFIG_X86_32
243 per_cpu(x86_cpu_to_logical_apicid, cpu) =
244 early_per_cpu_map(x86_cpu_to_logical_apicid, cpu);
245 #endif
246 #ifdef CONFIG_NUMA
247 per_cpu(x86_cpu_to_node_map, cpu) =
248 early_per_cpu_map(x86_cpu_to_node_map, cpu);
249 /*
250 * Ensure that the boot cpu numa_node is correct when the boot
251 * cpu is on a node that doesn't have memory installed.
252 * Also cpu_up() will call cpu_to_node() for APs when
253 * MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
254 * up later with c_init aka intel_init/amd_init.
255 * So set them all (boot cpu and all APs).
256 */
257 set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
258 #endif
259 /*
260 * Up to this point, the boot CPU has been using .init.data
261 * area. Reload any changed state for the boot CPU.
262 */
263 if (!cpu)
264 switch_to_new_gdt(cpu);
265 }
266
267 /* indicate the early static arrays will soon be gone */
268 #ifdef CONFIG_X86_LOCAL_APIC
269 early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
270 early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
271 early_per_cpu_ptr(x86_cpu_to_acpiid) = NULL;
272 #endif
273 #ifdef CONFIG_X86_32
274 early_per_cpu_ptr(x86_cpu_to_logical_apicid) = NULL;
275 #endif
276 #ifdef CONFIG_NUMA
277 early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
278 #endif
279
280 /* Setup node to cpumask map */
281 setup_node_to_cpumask_map();
282
283 /* Setup cpu initialized, callin, callout masks */
284 setup_cpu_local_masks();
285
286 /*
287 * Sync back kernel address range again. We already did this in
288 * setup_arch(), but percpu data also needs to be available in
289 * the smpboot asm and arch_sync_kernel_mappings() doesn't sync to
290 * swapper_pg_dir on 32-bit. The per-cpu mappings need to be available
291 * there too.
292 *
293 * FIXME: Can the later sync in setup_cpu_entry_areas() replace
294 * this call?
295 */
296 sync_initial_page_table();
297 }
298