1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * gpio-event-mon - monitor GPIO line events from userspace
4 *
5 * Copyright (C) 2016 Linus Walleij
6 *
7 * Usage:
8 * gpio-event-mon -n <device-name> -o <offset>
9 */
10
11 #include <unistd.h>
12 #include <stdlib.h>
13 #include <stdbool.h>
14 #include <stdint.h>
15 #include <stdio.h>
16 #include <dirent.h>
17 #include <errno.h>
18 #include <string.h>
19 #include <poll.h>
20 #include <fcntl.h>
21 #include <getopt.h>
22 #include <inttypes.h>
23 #include <sys/ioctl.h>
24 #include <sys/types.h>
25 #include <linux/gpio.h>
26 #include "gpio-utils.h"
27
monitor_device(const char * device_name,unsigned int * lines,unsigned int num_lines,struct gpio_v2_line_config * config,unsigned int loops)28 int monitor_device(const char *device_name,
29 unsigned int *lines,
30 unsigned int num_lines,
31 struct gpio_v2_line_config *config,
32 unsigned int loops)
33 {
34 struct gpio_v2_line_values values;
35 char *chrdev_name;
36 int cfd, lfd;
37 int ret;
38 int i = 0;
39
40 ret = asprintf(&chrdev_name, "/dev/%s", device_name);
41 if (ret < 0)
42 return -ENOMEM;
43
44 cfd = open(chrdev_name, 0);
45 if (cfd == -1) {
46 ret = -errno;
47 fprintf(stderr, "Failed to open %s\n", chrdev_name);
48 goto exit_free_name;
49 }
50
51 ret = gpiotools_request_line(device_name, lines, num_lines, config,
52 "gpio-event-mon");
53 if (ret < 0)
54 goto exit_device_close;
55 else
56 lfd = ret;
57
58 /* Read initial states */
59 values.mask = 0;
60 values.bits = 0;
61 for (i = 0; i < num_lines; i++)
62 gpiotools_set_bit(&values.mask, i);
63 ret = gpiotools_get_values(lfd, &values);
64 if (ret < 0) {
65 fprintf(stderr,
66 "Failed to issue GPIO LINE GET VALUES IOCTL (%d)\n",
67 ret);
68 goto exit_line_close;
69 }
70
71 if (num_lines == 1) {
72 fprintf(stdout, "Monitoring line %d on %s\n", lines[0], device_name);
73 fprintf(stdout, "Initial line value: %d\n",
74 gpiotools_test_bit(values.bits, 0));
75 } else {
76 fprintf(stdout, "Monitoring lines %d", lines[0]);
77 for (i = 1; i < num_lines - 1; i++)
78 fprintf(stdout, ", %d", lines[i]);
79 fprintf(stdout, " and %d on %s\n", lines[i], device_name);
80 fprintf(stdout, "Initial line values: %d",
81 gpiotools_test_bit(values.bits, 0));
82 for (i = 1; i < num_lines - 1; i++)
83 fprintf(stdout, ", %d",
84 gpiotools_test_bit(values.bits, i));
85 fprintf(stdout, " and %d\n",
86 gpiotools_test_bit(values.bits, i));
87 }
88
89 i = 0;
90 while (1) {
91 struct gpio_v2_line_event event;
92
93 ret = read(lfd, &event, sizeof(event));
94 if (ret == -1) {
95 if (errno == -EAGAIN) {
96 fprintf(stderr, "nothing available\n");
97 continue;
98 } else {
99 ret = -errno;
100 fprintf(stderr, "Failed to read event (%d)\n",
101 ret);
102 break;
103 }
104 }
105
106 if (ret != sizeof(event)) {
107 fprintf(stderr, "Reading event failed\n");
108 ret = -EIO;
109 break;
110 }
111 fprintf(stdout, "GPIO EVENT at %" PRIu64 " on line %d (%d|%d) ",
112 (uint64_t)event.timestamp_ns, event.offset, event.line_seqno,
113 event.seqno);
114 switch (event.id) {
115 case GPIO_V2_LINE_EVENT_RISING_EDGE:
116 fprintf(stdout, "rising edge");
117 break;
118 case GPIO_V2_LINE_EVENT_FALLING_EDGE:
119 fprintf(stdout, "falling edge");
120 break;
121 default:
122 fprintf(stdout, "unknown event");
123 }
124 fprintf(stdout, "\n");
125
126 i++;
127 if (i == loops)
128 break;
129 }
130
131 exit_line_close:
132 if (close(lfd) == -1)
133 perror("Failed to close line file");
134 exit_device_close:
135 if (close(cfd) == -1)
136 perror("Failed to close GPIO character device file");
137 exit_free_name:
138 free(chrdev_name);
139 return ret;
140 }
141
print_usage(void)142 void print_usage(void)
143 {
144 fprintf(stderr, "Usage: gpio-event-mon [options]...\n"
145 "Listen to events on GPIO lines, 0->1 1->0\n"
146 " -n <name> Listen on GPIOs on a named device (must be stated)\n"
147 " -o <n> Offset of line to monitor (may be repeated)\n"
148 " -d Set line as open drain\n"
149 " -s Set line as open source\n"
150 " -r Listen for rising edges\n"
151 " -f Listen for falling edges\n"
152 " -w Report the wall-clock time for events\n"
153 " -b <n> Debounce the line with period n microseconds\n"
154 " [-c <n>] Do <n> loops (optional, infinite loop if not stated)\n"
155 " -? This helptext\n"
156 "\n"
157 "Example:\n"
158 "gpio-event-mon -n gpiochip0 -o 4 -r -f -b 10000\n"
159 );
160 }
161
162 #define EDGE_FLAGS \
163 (GPIO_V2_LINE_FLAG_EDGE_RISING | \
164 GPIO_V2_LINE_FLAG_EDGE_FALLING)
165
main(int argc,char ** argv)166 int main(int argc, char **argv)
167 {
168 const char *device_name = NULL;
169 unsigned int lines[GPIO_V2_LINES_MAX];
170 unsigned int num_lines = 0;
171 unsigned int loops = 0;
172 struct gpio_v2_line_config config;
173 int c, attr, i;
174 unsigned long debounce_period_us = 0;
175
176 memset(&config, 0, sizeof(config));
177 config.flags = GPIO_V2_LINE_FLAG_INPUT;
178 while ((c = getopt(argc, argv, "c:n:o:b:dsrfw?")) != -1) {
179 switch (c) {
180 case 'c':
181 loops = strtoul(optarg, NULL, 10);
182 break;
183 case 'n':
184 device_name = optarg;
185 break;
186 case 'o':
187 if (num_lines >= GPIO_V2_LINES_MAX) {
188 print_usage();
189 return -1;
190 }
191 lines[num_lines] = strtoul(optarg, NULL, 10);
192 num_lines++;
193 break;
194 case 'b':
195 debounce_period_us = strtoul(optarg, NULL, 10);
196 break;
197 case 'd':
198 config.flags |= GPIO_V2_LINE_FLAG_OPEN_DRAIN;
199 break;
200 case 's':
201 config.flags |= GPIO_V2_LINE_FLAG_OPEN_SOURCE;
202 break;
203 case 'r':
204 config.flags |= GPIO_V2_LINE_FLAG_EDGE_RISING;
205 break;
206 case 'f':
207 config.flags |= GPIO_V2_LINE_FLAG_EDGE_FALLING;
208 break;
209 case 'w':
210 config.flags |= GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME;
211 break;
212 case '?':
213 print_usage();
214 return -1;
215 }
216 }
217
218 if (debounce_period_us) {
219 attr = config.num_attrs;
220 config.num_attrs++;
221 for (i = 0; i < num_lines; i++)
222 gpiotools_set_bit(&config.attrs[attr].mask, i);
223 config.attrs[attr].attr.id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE;
224 config.attrs[attr].attr.debounce_period_us = debounce_period_us;
225 }
226
227 if (!device_name || num_lines == 0) {
228 print_usage();
229 return -1;
230 }
231 if (!(config.flags & EDGE_FLAGS)) {
232 printf("No flags specified, listening on both rising and "
233 "falling edges\n");
234 config.flags |= EDGE_FLAGS;
235 }
236 return monitor_device(device_name, lines, num_lines, &config, loops);
237 }
238