1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright 2010 Google Inc. All Rights Reserved.
4 * Author: dlaurie@google.com (Duncan Laurie)
5 *
6 * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
7 *
8 * EFI SMI interface for Google platforms
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/types.h>
14 #include <linux/device.h>
15 #include <linux/platform_device.h>
16 #include <linux/errno.h>
17 #include <linux/string.h>
18 #include <linux/spinlock.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/fs.h>
21 #include <linux/slab.h>
22 #include <linux/panic_notifier.h>
23 #include <linux/ioctl.h>
24 #include <linux/acpi.h>
25 #include <linux/io.h>
26 #include <linux/uaccess.h>
27 #include <linux/dmi.h>
28 #include <linux/kdebug.h>
29 #include <linux/reboot.h>
30 #include <linux/efi.h>
31 #include <linux/module.h>
32 #include <linux/ucs2_string.h>
33 #include <linux/suspend.h>
34
35 #define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */
36 /* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
37 #define GSMI_SHUTDOWN_NMIWDT 1 /* NMI Watchdog */
38 #define GSMI_SHUTDOWN_PANIC 2 /* Panic */
39 #define GSMI_SHUTDOWN_OOPS 3 /* Oops */
40 #define GSMI_SHUTDOWN_DIE 4 /* Die -- No longer meaningful */
41 #define GSMI_SHUTDOWN_MCE 5 /* Machine Check */
42 #define GSMI_SHUTDOWN_SOFTWDT 6 /* Software Watchdog */
43 #define GSMI_SHUTDOWN_MBE 7 /* Uncorrected ECC */
44 #define GSMI_SHUTDOWN_TRIPLE 8 /* Triple Fault */
45
46 #define DRIVER_VERSION "1.0"
47 #define GSMI_GUID_SIZE 16
48 #define GSMI_BUF_SIZE 1024
49 #define GSMI_BUF_ALIGN sizeof(u64)
50 #define GSMI_CALLBACK 0xef
51
52 /* SMI return codes */
53 #define GSMI_SUCCESS 0x00
54 #define GSMI_UNSUPPORTED2 0x03
55 #define GSMI_LOG_FULL 0x0b
56 #define GSMI_VAR_NOT_FOUND 0x0e
57 #define GSMI_HANDSHAKE_SPIN 0x7d
58 #define GSMI_HANDSHAKE_CF 0x7e
59 #define GSMI_HANDSHAKE_NONE 0x7f
60 #define GSMI_INVALID_PARAMETER 0x82
61 #define GSMI_UNSUPPORTED 0x83
62 #define GSMI_BUFFER_TOO_SMALL 0x85
63 #define GSMI_NOT_READY 0x86
64 #define GSMI_DEVICE_ERROR 0x87
65 #define GSMI_NOT_FOUND 0x8e
66
67 #define QUIRKY_BOARD_HASH 0x78a30a50
68
69 /* Internally used commands passed to the firmware */
70 #define GSMI_CMD_GET_NVRAM_VAR 0x01
71 #define GSMI_CMD_GET_NEXT_VAR 0x02
72 #define GSMI_CMD_SET_NVRAM_VAR 0x03
73 #define GSMI_CMD_SET_EVENT_LOG 0x08
74 #define GSMI_CMD_CLEAR_EVENT_LOG 0x09
75 #define GSMI_CMD_LOG_S0IX_SUSPEND 0x0a
76 #define GSMI_CMD_LOG_S0IX_RESUME 0x0b
77 #define GSMI_CMD_CLEAR_CONFIG 0x20
78 #define GSMI_CMD_HANDSHAKE_TYPE 0xC1
79 #define GSMI_CMD_RESERVED 0xff
80
81 /* Magic entry type for kernel events */
82 #define GSMI_LOG_ENTRY_TYPE_KERNEL 0xDEAD
83
84 /* SMI buffers must be in 32bit physical address space */
85 struct gsmi_buf {
86 u8 *start; /* start of buffer */
87 size_t length; /* length of buffer */
88 u32 address; /* physical address of buffer */
89 };
90
91 static struct gsmi_device {
92 struct platform_device *pdev; /* platform device */
93 struct gsmi_buf *name_buf; /* variable name buffer */
94 struct gsmi_buf *data_buf; /* generic data buffer */
95 struct gsmi_buf *param_buf; /* parameter buffer */
96 spinlock_t lock; /* serialize access to SMIs */
97 u16 smi_cmd; /* SMI command port */
98 int handshake_type; /* firmware handler interlock type */
99 struct kmem_cache *mem_pool; /* kmem cache for gsmi_buf allocations */
100 } gsmi_dev;
101
102 /* Packed structures for communicating with the firmware */
103 struct gsmi_nvram_var_param {
104 efi_guid_t guid;
105 u32 name_ptr;
106 u32 attributes;
107 u32 data_len;
108 u32 data_ptr;
109 } __packed;
110
111 struct gsmi_get_next_var_param {
112 u8 guid[GSMI_GUID_SIZE];
113 u32 name_ptr;
114 u32 name_len;
115 } __packed;
116
117 struct gsmi_set_eventlog_param {
118 u32 data_ptr;
119 u32 data_len;
120 u32 type;
121 } __packed;
122
123 /* Event log formats */
124 struct gsmi_log_entry_type_1 {
125 u16 type;
126 u32 instance;
127 } __packed;
128
129 /*
130 * Some platforms don't have explicit SMI handshake
131 * and need to wait for SMI to complete.
132 */
133 #define GSMI_DEFAULT_SPINCOUNT 0x10000
134 static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
135 module_param(spincount, uint, 0600);
136 MODULE_PARM_DESC(spincount,
137 "The number of loop iterations to use when using the spin handshake.");
138
139 /*
140 * Some older platforms with Apollo Lake chipsets do not support S0ix logging
141 * in their GSMI handlers, and behaved poorly when resuming via power button
142 * press if the logging was attempted. Updated firmware with proper behavior
143 * has long since shipped, removing the need for this opt-in parameter. It
144 * now exists as an opt-out parameter for folks defiantly running old
145 * firmware, or unforeseen circumstances. After the change from opt-in to
146 * opt-out has baked sufficiently, this parameter should probably be removed
147 * entirely.
148 */
149 static bool s0ix_logging_enable = true;
150 module_param(s0ix_logging_enable, bool, 0600);
151
gsmi_buf_alloc(void)152 static struct gsmi_buf *gsmi_buf_alloc(void)
153 {
154 struct gsmi_buf *smibuf;
155
156 smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
157 if (!smibuf) {
158 printk(KERN_ERR "gsmi: out of memory\n");
159 return NULL;
160 }
161
162 /* allocate buffer in 32bit address space */
163 smibuf->start = kmem_cache_alloc(gsmi_dev.mem_pool, GFP_KERNEL);
164 if (!smibuf->start) {
165 printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
166 kfree(smibuf);
167 return NULL;
168 }
169
170 /* fill in the buffer handle */
171 smibuf->length = GSMI_BUF_SIZE;
172 smibuf->address = (u32)virt_to_phys(smibuf->start);
173
174 return smibuf;
175 }
176
gsmi_buf_free(struct gsmi_buf * smibuf)177 static void gsmi_buf_free(struct gsmi_buf *smibuf)
178 {
179 if (smibuf) {
180 if (smibuf->start)
181 kmem_cache_free(gsmi_dev.mem_pool, smibuf->start);
182 kfree(smibuf);
183 }
184 }
185
186 /*
187 * Make a call to gsmi func(sub). GSMI error codes are translated to
188 * in-kernel errnos (0 on success, -ERRNO on error).
189 */
gsmi_exec(u8 func,u8 sub)190 static int gsmi_exec(u8 func, u8 sub)
191 {
192 u16 cmd = (sub << 8) | func;
193 u16 result = 0;
194 int rc = 0;
195
196 /*
197 * AH : Subfunction number
198 * AL : Function number
199 * EBX : Parameter block address
200 * DX : SMI command port
201 *
202 * Three protocols here. See also the comment in gsmi_init().
203 */
204 if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
205 /*
206 * If handshake_type == HANDSHAKE_CF then set CF on the
207 * way in and wait for the handler to clear it; this avoids
208 * corrupting register state on those chipsets which have
209 * a delay between writing the SMI trigger register and
210 * entering SMM.
211 */
212 asm volatile (
213 "stc\n"
214 "outb %%al, %%dx\n"
215 "1: jc 1b\n"
216 : "=a" (result)
217 : "0" (cmd),
218 "d" (gsmi_dev.smi_cmd),
219 "b" (gsmi_dev.param_buf->address)
220 : "memory", "cc"
221 );
222 } else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
223 /*
224 * If handshake_type == HANDSHAKE_SPIN we spin a
225 * hundred-ish usecs to ensure the SMI has triggered.
226 */
227 asm volatile (
228 "outb %%al, %%dx\n"
229 "1: loop 1b\n"
230 : "=a" (result)
231 : "0" (cmd),
232 "d" (gsmi_dev.smi_cmd),
233 "b" (gsmi_dev.param_buf->address),
234 "c" (spincount)
235 : "memory", "cc"
236 );
237 } else {
238 /*
239 * If handshake_type == HANDSHAKE_NONE we do nothing;
240 * either we don't need to or it's legacy firmware that
241 * doesn't understand the CF protocol.
242 */
243 asm volatile (
244 "outb %%al, %%dx\n\t"
245 : "=a" (result)
246 : "0" (cmd),
247 "d" (gsmi_dev.smi_cmd),
248 "b" (gsmi_dev.param_buf->address)
249 : "memory", "cc"
250 );
251 }
252
253 /* check return code from SMI handler */
254 switch (result) {
255 case GSMI_SUCCESS:
256 break;
257 case GSMI_VAR_NOT_FOUND:
258 /* not really an error, but let the caller know */
259 rc = 1;
260 break;
261 case GSMI_INVALID_PARAMETER:
262 printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
263 rc = -EINVAL;
264 break;
265 case GSMI_BUFFER_TOO_SMALL:
266 printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
267 rc = -ENOMEM;
268 break;
269 case GSMI_UNSUPPORTED:
270 case GSMI_UNSUPPORTED2:
271 if (sub != GSMI_CMD_HANDSHAKE_TYPE)
272 printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
273 cmd);
274 rc = -ENOSYS;
275 break;
276 case GSMI_NOT_READY:
277 printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
278 rc = -EBUSY;
279 break;
280 case GSMI_DEVICE_ERROR:
281 printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
282 rc = -EFAULT;
283 break;
284 case GSMI_NOT_FOUND:
285 printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
286 rc = -ENOENT;
287 break;
288 case GSMI_LOG_FULL:
289 printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
290 rc = -ENOSPC;
291 break;
292 case GSMI_HANDSHAKE_CF:
293 case GSMI_HANDSHAKE_SPIN:
294 case GSMI_HANDSHAKE_NONE:
295 rc = result;
296 break;
297 default:
298 printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
299 cmd, result);
300 rc = -ENXIO;
301 }
302
303 return rc;
304 }
305
306 #ifdef CONFIG_EFI
307
308 static struct efivars efivars;
309
gsmi_get_variable(efi_char16_t * name,efi_guid_t * vendor,u32 * attr,unsigned long * data_size,void * data)310 static efi_status_t gsmi_get_variable(efi_char16_t *name,
311 efi_guid_t *vendor, u32 *attr,
312 unsigned long *data_size,
313 void *data)
314 {
315 struct gsmi_nvram_var_param param = {
316 .name_ptr = gsmi_dev.name_buf->address,
317 .data_ptr = gsmi_dev.data_buf->address,
318 .data_len = (u32)*data_size,
319 };
320 efi_status_t ret = EFI_SUCCESS;
321 unsigned long flags;
322 size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
323 int rc;
324
325 if (name_len >= GSMI_BUF_SIZE / 2)
326 return EFI_BAD_BUFFER_SIZE;
327
328 spin_lock_irqsave(&gsmi_dev.lock, flags);
329
330 /* Vendor guid */
331 memcpy(¶m.guid, vendor, sizeof(param.guid));
332
333 /* variable name, already in UTF-16 */
334 memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
335 memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
336
337 /* data pointer */
338 memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
339
340 /* parameter buffer */
341 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
342 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
343
344 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
345 if (rc < 0) {
346 printk(KERN_ERR "gsmi: Get Variable failed\n");
347 ret = EFI_LOAD_ERROR;
348 } else if (rc == 1) {
349 /* variable was not found */
350 ret = EFI_NOT_FOUND;
351 } else {
352 /* Get the arguments back */
353 memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param));
354
355 /* The size reported is the min of all of our buffers */
356 *data_size = min_t(unsigned long, *data_size,
357 gsmi_dev.data_buf->length);
358 *data_size = min_t(unsigned long, *data_size, param.data_len);
359
360 /* Copy data back to return buffer. */
361 memcpy(data, gsmi_dev.data_buf->start, *data_size);
362
363 /* All variables are have the following attributes */
364 if (attr)
365 *attr = EFI_VARIABLE_NON_VOLATILE |
366 EFI_VARIABLE_BOOTSERVICE_ACCESS |
367 EFI_VARIABLE_RUNTIME_ACCESS;
368 }
369
370 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
371
372 return ret;
373 }
374
gsmi_get_next_variable(unsigned long * name_size,efi_char16_t * name,efi_guid_t * vendor)375 static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
376 efi_char16_t *name,
377 efi_guid_t *vendor)
378 {
379 struct gsmi_get_next_var_param param = {
380 .name_ptr = gsmi_dev.name_buf->address,
381 .name_len = gsmi_dev.name_buf->length,
382 };
383 efi_status_t ret = EFI_SUCCESS;
384 int rc;
385 unsigned long flags;
386
387 /* For the moment, only support buffers that exactly match in size */
388 if (*name_size != GSMI_BUF_SIZE)
389 return EFI_BAD_BUFFER_SIZE;
390
391 /* Let's make sure the thing is at least null-terminated */
392 if (ucs2_strnlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
393 return EFI_INVALID_PARAMETER;
394
395 spin_lock_irqsave(&gsmi_dev.lock, flags);
396
397 /* guid */
398 memcpy(¶m.guid, vendor, sizeof(param.guid));
399
400 /* variable name, already in UTF-16 */
401 memcpy(gsmi_dev.name_buf->start, name, *name_size);
402
403 /* parameter buffer */
404 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
405 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
406
407 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
408 if (rc < 0) {
409 printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
410 ret = EFI_LOAD_ERROR;
411 } else if (rc == 1) {
412 /* variable not found -- end of list */
413 ret = EFI_NOT_FOUND;
414 } else {
415 /* copy variable data back to return buffer */
416 memcpy(¶m, gsmi_dev.param_buf->start, sizeof(param));
417
418 /* Copy the name back */
419 memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
420 *name_size = ucs2_strnlen(name, GSMI_BUF_SIZE / 2) * 2;
421
422 /* copy guid to return buffer */
423 memcpy(vendor, ¶m.guid, sizeof(param.guid));
424 ret = EFI_SUCCESS;
425 }
426
427 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
428
429 return ret;
430 }
431
gsmi_set_variable(efi_char16_t * name,efi_guid_t * vendor,u32 attr,unsigned long data_size,void * data)432 static efi_status_t gsmi_set_variable(efi_char16_t *name,
433 efi_guid_t *vendor,
434 u32 attr,
435 unsigned long data_size,
436 void *data)
437 {
438 struct gsmi_nvram_var_param param = {
439 .name_ptr = gsmi_dev.name_buf->address,
440 .data_ptr = gsmi_dev.data_buf->address,
441 .data_len = (u32)data_size,
442 .attributes = EFI_VARIABLE_NON_VOLATILE |
443 EFI_VARIABLE_BOOTSERVICE_ACCESS |
444 EFI_VARIABLE_RUNTIME_ACCESS,
445 };
446 size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
447 efi_status_t ret = EFI_SUCCESS;
448 int rc;
449 unsigned long flags;
450
451 if (name_len >= GSMI_BUF_SIZE / 2)
452 return EFI_BAD_BUFFER_SIZE;
453
454 spin_lock_irqsave(&gsmi_dev.lock, flags);
455
456 /* guid */
457 memcpy(¶m.guid, vendor, sizeof(param.guid));
458
459 /* variable name, already in UTF-16 */
460 memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
461 memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
462
463 /* data pointer */
464 memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
465 memcpy(gsmi_dev.data_buf->start, data, data_size);
466
467 /* parameter buffer */
468 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
469 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
470
471 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
472 if (rc < 0) {
473 printk(KERN_ERR "gsmi: Set Variable failed\n");
474 ret = EFI_INVALID_PARAMETER;
475 }
476
477 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
478
479 return ret;
480 }
481
482 static const struct efivar_operations efivar_ops = {
483 .get_variable = gsmi_get_variable,
484 .set_variable = gsmi_set_variable,
485 .get_next_variable = gsmi_get_next_variable,
486 };
487
488 #endif /* CONFIG_EFI */
489
eventlog_write(struct file * filp,struct kobject * kobj,struct bin_attribute * bin_attr,char * buf,loff_t pos,size_t count)490 static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
491 struct bin_attribute *bin_attr,
492 char *buf, loff_t pos, size_t count)
493 {
494 struct gsmi_set_eventlog_param param = {
495 .data_ptr = gsmi_dev.data_buf->address,
496 };
497 int rc = 0;
498 unsigned long flags;
499
500 /* Pull the type out */
501 if (count < sizeof(u32))
502 return -EINVAL;
503 param.type = *(u32 *)buf;
504 buf += sizeof(u32);
505
506 /* The remaining buffer is the data payload */
507 if ((count - sizeof(u32)) > gsmi_dev.data_buf->length)
508 return -EINVAL;
509 param.data_len = count - sizeof(u32);
510
511 spin_lock_irqsave(&gsmi_dev.lock, flags);
512
513 /* data pointer */
514 memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
515 memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
516
517 /* parameter buffer */
518 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
519 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
520
521 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
522 if (rc < 0)
523 printk(KERN_ERR "gsmi: Set Event Log failed\n");
524
525 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
526
527 return (rc == 0) ? count : rc;
528
529 }
530
531 static struct bin_attribute eventlog_bin_attr = {
532 .attr = {.name = "append_to_eventlog", .mode = 0200},
533 .write = eventlog_write,
534 };
535
gsmi_clear_eventlog_store(struct kobject * kobj,struct kobj_attribute * attr,const char * buf,size_t count)536 static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
537 struct kobj_attribute *attr,
538 const char *buf, size_t count)
539 {
540 int rc;
541 unsigned long flags;
542 unsigned long val;
543 struct {
544 u32 percentage;
545 u32 data_type;
546 } param;
547
548 rc = kstrtoul(buf, 0, &val);
549 if (rc)
550 return rc;
551
552 /*
553 * Value entered is a percentage, 0 through 100, anything else
554 * is invalid.
555 */
556 if (val > 100)
557 return -EINVAL;
558
559 /* data_type here selects the smbios event log. */
560 param.percentage = val;
561 param.data_type = 0;
562
563 spin_lock_irqsave(&gsmi_dev.lock, flags);
564
565 /* parameter buffer */
566 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
567 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
568
569 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
570
571 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
572
573 if (rc)
574 return rc;
575 return count;
576 }
577
578 static struct kobj_attribute gsmi_clear_eventlog_attr = {
579 .attr = {.name = "clear_eventlog", .mode = 0200},
580 .store = gsmi_clear_eventlog_store,
581 };
582
gsmi_clear_config_store(struct kobject * kobj,struct kobj_attribute * attr,const char * buf,size_t count)583 static ssize_t gsmi_clear_config_store(struct kobject *kobj,
584 struct kobj_attribute *attr,
585 const char *buf, size_t count)
586 {
587 int rc;
588 unsigned long flags;
589
590 spin_lock_irqsave(&gsmi_dev.lock, flags);
591
592 /* clear parameter buffer */
593 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
594
595 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
596
597 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
598
599 if (rc)
600 return rc;
601 return count;
602 }
603
604 static struct kobj_attribute gsmi_clear_config_attr = {
605 .attr = {.name = "clear_config", .mode = 0200},
606 .store = gsmi_clear_config_store,
607 };
608
609 static const struct attribute *gsmi_attrs[] = {
610 &gsmi_clear_config_attr.attr,
611 &gsmi_clear_eventlog_attr.attr,
612 NULL,
613 };
614
gsmi_shutdown_reason(int reason)615 static int gsmi_shutdown_reason(int reason)
616 {
617 struct gsmi_log_entry_type_1 entry = {
618 .type = GSMI_LOG_ENTRY_TYPE_KERNEL,
619 .instance = reason,
620 };
621 struct gsmi_set_eventlog_param param = {
622 .data_len = sizeof(entry),
623 .type = 1,
624 };
625 static int saved_reason;
626 int rc = 0;
627 unsigned long flags;
628
629 /* avoid duplicate entries in the log */
630 if (saved_reason & (1 << reason))
631 return 0;
632
633 spin_lock_irqsave(&gsmi_dev.lock, flags);
634
635 saved_reason |= (1 << reason);
636
637 /* data pointer */
638 memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
639 memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
640
641 /* parameter buffer */
642 param.data_ptr = gsmi_dev.data_buf->address;
643 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
644 memcpy(gsmi_dev.param_buf->start, ¶m, sizeof(param));
645
646 rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
647
648 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
649
650 if (rc < 0)
651 printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
652 else
653 printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
654 reason);
655
656 return rc;
657 }
658
gsmi_reboot_callback(struct notifier_block * nb,unsigned long reason,void * arg)659 static int gsmi_reboot_callback(struct notifier_block *nb,
660 unsigned long reason, void *arg)
661 {
662 gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
663 return NOTIFY_DONE;
664 }
665
666 static struct notifier_block gsmi_reboot_notifier = {
667 .notifier_call = gsmi_reboot_callback
668 };
669
gsmi_die_callback(struct notifier_block * nb,unsigned long reason,void * arg)670 static int gsmi_die_callback(struct notifier_block *nb,
671 unsigned long reason, void *arg)
672 {
673 if (reason == DIE_OOPS)
674 gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
675 return NOTIFY_DONE;
676 }
677
678 static struct notifier_block gsmi_die_notifier = {
679 .notifier_call = gsmi_die_callback
680 };
681
gsmi_panic_callback(struct notifier_block * nb,unsigned long reason,void * arg)682 static int gsmi_panic_callback(struct notifier_block *nb,
683 unsigned long reason, void *arg)
684 {
685
686 /*
687 * Panic callbacks are executed with all other CPUs stopped,
688 * so we must not attempt to spin waiting for gsmi_dev.lock
689 * to be released.
690 */
691 if (spin_is_locked(&gsmi_dev.lock))
692 return NOTIFY_DONE;
693
694 gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
695 return NOTIFY_DONE;
696 }
697
698 static struct notifier_block gsmi_panic_notifier = {
699 .notifier_call = gsmi_panic_callback,
700 };
701
702 /*
703 * This hash function was blatantly copied from include/linux/hash.h.
704 * It is used by this driver to obfuscate a board name that requires a
705 * quirk within this driver.
706 *
707 * Please do not remove this copy of the function as any changes to the
708 * global utility hash_64() function would break this driver's ability
709 * to identify a board and provide the appropriate quirk -- mikew@google.com
710 */
local_hash_64(u64 val,unsigned bits)711 static u64 __init local_hash_64(u64 val, unsigned bits)
712 {
713 u64 hash = val;
714
715 /* Sigh, gcc can't optimise this alone like it does for 32 bits. */
716 u64 n = hash;
717 n <<= 18;
718 hash -= n;
719 n <<= 33;
720 hash -= n;
721 n <<= 3;
722 hash += n;
723 n <<= 3;
724 hash -= n;
725 n <<= 4;
726 hash += n;
727 n <<= 2;
728 hash += n;
729
730 /* High bits are more random, so use them. */
731 return hash >> (64 - bits);
732 }
733
hash_oem_table_id(char s[8])734 static u32 __init hash_oem_table_id(char s[8])
735 {
736 u64 input;
737 memcpy(&input, s, 8);
738 return local_hash_64(input, 32);
739 }
740
741 static const struct dmi_system_id gsmi_dmi_table[] __initconst = {
742 {
743 .ident = "Google Board",
744 .matches = {
745 DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
746 },
747 },
748 {
749 .ident = "Coreboot Firmware",
750 .matches = {
751 DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"),
752 },
753 },
754 {}
755 };
756 MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
757
gsmi_system_valid(void)758 static __init int gsmi_system_valid(void)
759 {
760 u32 hash;
761 u16 cmd, result;
762
763 if (!dmi_check_system(gsmi_dmi_table))
764 return -ENODEV;
765
766 /*
767 * Only newer firmware supports the gsmi interface. All older
768 * firmware that didn't support this interface used to plug the
769 * table name in the first four bytes of the oem_table_id field.
770 * Newer firmware doesn't do that though, so use that as the
771 * discriminant factor. We have to do this in order to
772 * whitewash our board names out of the public driver.
773 */
774 if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
775 printk(KERN_INFO "gsmi: Board is too old\n");
776 return -ENODEV;
777 }
778
779 /* Disable on board with 1.0 BIOS due to Google bug 2602657 */
780 hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
781 if (hash == QUIRKY_BOARD_HASH) {
782 const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
783 if (strncmp(bios_ver, "1.0", 3) == 0) {
784 pr_info("gsmi: disabled on this board's BIOS %s\n",
785 bios_ver);
786 return -ENODEV;
787 }
788 }
789
790 /* check for valid SMI command port in ACPI FADT */
791 if (acpi_gbl_FADT.smi_command == 0) {
792 pr_info("gsmi: missing smi_command\n");
793 return -ENODEV;
794 }
795
796 /* Test the smihandler with a bogus command. If it leaves the
797 * calling argument in %ax untouched, there is no handler for
798 * GSMI commands.
799 */
800 cmd = GSMI_CALLBACK | GSMI_CMD_RESERVED << 8;
801 asm volatile (
802 "outb %%al, %%dx\n\t"
803 : "=a" (result)
804 : "0" (cmd),
805 "d" (acpi_gbl_FADT.smi_command)
806 : "memory", "cc"
807 );
808 if (cmd == result) {
809 pr_info("gsmi: no gsmi handler in firmware\n");
810 return -ENODEV;
811 }
812
813 /* Found */
814 return 0;
815 }
816
817 static struct kobject *gsmi_kobj;
818
819 static const struct platform_device_info gsmi_dev_info = {
820 .name = "gsmi",
821 .id = -1,
822 /* SMI callbacks require 32bit addresses */
823 .dma_mask = DMA_BIT_MASK(32),
824 };
825
826 #ifdef CONFIG_PM
gsmi_log_s0ix_info(u8 cmd)827 static void gsmi_log_s0ix_info(u8 cmd)
828 {
829 unsigned long flags;
830
831 /*
832 * If platform has not enabled S0ix logging, then no action is
833 * necessary.
834 */
835 if (!s0ix_logging_enable)
836 return;
837
838 spin_lock_irqsave(&gsmi_dev.lock, flags);
839
840 memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
841
842 gsmi_exec(GSMI_CALLBACK, cmd);
843
844 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
845 }
846
gsmi_log_s0ix_suspend(struct device * dev)847 static int gsmi_log_s0ix_suspend(struct device *dev)
848 {
849 /*
850 * If system is not suspending via firmware using the standard ACPI Sx
851 * types, then make a GSMI call to log the suspend info.
852 */
853 if (!pm_suspend_via_firmware())
854 gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_SUSPEND);
855
856 /*
857 * Always return success, since we do not want suspend
858 * to fail just because of logging failure.
859 */
860 return 0;
861 }
862
gsmi_log_s0ix_resume(struct device * dev)863 static int gsmi_log_s0ix_resume(struct device *dev)
864 {
865 /*
866 * If system did not resume via firmware, then make a GSMI call to log
867 * the resume info and wake source.
868 */
869 if (!pm_resume_via_firmware())
870 gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_RESUME);
871
872 /*
873 * Always return success, since we do not want resume
874 * to fail just because of logging failure.
875 */
876 return 0;
877 }
878
879 static const struct dev_pm_ops gsmi_pm_ops = {
880 .suspend_noirq = gsmi_log_s0ix_suspend,
881 .resume_noirq = gsmi_log_s0ix_resume,
882 };
883
gsmi_platform_driver_probe(struct platform_device * dev)884 static int gsmi_platform_driver_probe(struct platform_device *dev)
885 {
886 return 0;
887 }
888
889 static struct platform_driver gsmi_driver_info = {
890 .driver = {
891 .name = "gsmi",
892 .pm = &gsmi_pm_ops,
893 },
894 .probe = gsmi_platform_driver_probe,
895 };
896 #endif
897
gsmi_init(void)898 static __init int gsmi_init(void)
899 {
900 unsigned long flags;
901 int ret;
902
903 ret = gsmi_system_valid();
904 if (ret)
905 return ret;
906
907 gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
908
909 #ifdef CONFIG_PM
910 ret = platform_driver_register(&gsmi_driver_info);
911 if (unlikely(ret)) {
912 printk(KERN_ERR "gsmi: unable to register platform driver\n");
913 return ret;
914 }
915 #endif
916
917 /* register device */
918 gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
919 if (IS_ERR(gsmi_dev.pdev)) {
920 printk(KERN_ERR "gsmi: unable to register platform device\n");
921 return PTR_ERR(gsmi_dev.pdev);
922 }
923
924 /* SMI access needs to be serialized */
925 spin_lock_init(&gsmi_dev.lock);
926
927 ret = -ENOMEM;
928
929 /*
930 * SLAB cache is created using SLAB_CACHE_DMA32 to ensure that the
931 * allocations for gsmi_buf come from the DMA32 memory zone. These
932 * buffers have nothing to do with DMA. They are required for
933 * communication with firmware executing in SMI mode which can only
934 * access the bottom 4GiB of physical memory. Since DMA32 memory zone
935 * guarantees allocation under the 4GiB boundary, this driver creates
936 * a SLAB cache with SLAB_CACHE_DMA32 flag.
937 */
938 gsmi_dev.mem_pool = kmem_cache_create("gsmi", GSMI_BUF_SIZE,
939 GSMI_BUF_ALIGN,
940 SLAB_CACHE_DMA32, NULL);
941 if (!gsmi_dev.mem_pool)
942 goto out_err;
943
944 /*
945 * pre-allocate buffers because sometimes we are called when
946 * this is not feasible: oops, panic, die, mce, etc
947 */
948 gsmi_dev.name_buf = gsmi_buf_alloc();
949 if (!gsmi_dev.name_buf) {
950 printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
951 goto out_err;
952 }
953
954 gsmi_dev.data_buf = gsmi_buf_alloc();
955 if (!gsmi_dev.data_buf) {
956 printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
957 goto out_err;
958 }
959
960 gsmi_dev.param_buf = gsmi_buf_alloc();
961 if (!gsmi_dev.param_buf) {
962 printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
963 goto out_err;
964 }
965
966 /*
967 * Determine type of handshake used to serialize the SMI
968 * entry. See also gsmi_exec().
969 *
970 * There's a "behavior" present on some chipsets where writing the
971 * SMI trigger register in the southbridge doesn't result in an
972 * immediate SMI. Rather, the processor can execute "a few" more
973 * instructions before the SMI takes effect. To ensure synchronous
974 * behavior, implement a handshake between the kernel driver and the
975 * firmware handler to spin until released. This ioctl determines
976 * the type of handshake.
977 *
978 * NONE: The firmware handler does not implement any
979 * handshake. Either it doesn't need to, or it's legacy firmware
980 * that doesn't know it needs to and never will.
981 *
982 * CF: The firmware handler will clear the CF in the saved
983 * state before returning. The driver may set the CF and test for
984 * it to clear before proceeding.
985 *
986 * SPIN: The firmware handler does not implement any handshake
987 * but the driver should spin for a hundred or so microseconds
988 * to ensure the SMI has triggered.
989 *
990 * Finally, the handler will return -ENOSYS if
991 * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
992 * HANDSHAKE_NONE.
993 */
994 spin_lock_irqsave(&gsmi_dev.lock, flags);
995 gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
996 gsmi_dev.handshake_type =
997 gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
998 if (gsmi_dev.handshake_type == -ENOSYS)
999 gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
1000 spin_unlock_irqrestore(&gsmi_dev.lock, flags);
1001
1002 /* Remove and clean up gsmi if the handshake could not complete. */
1003 if (gsmi_dev.handshake_type == -ENXIO) {
1004 printk(KERN_INFO "gsmi version " DRIVER_VERSION
1005 " failed to load\n");
1006 ret = -ENODEV;
1007 goto out_err;
1008 }
1009
1010 /* Register in the firmware directory */
1011 ret = -ENOMEM;
1012 gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
1013 if (!gsmi_kobj) {
1014 printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
1015 goto out_err;
1016 }
1017
1018 /* Setup eventlog access */
1019 ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
1020 if (ret) {
1021 printk(KERN_INFO "gsmi: Failed to setup eventlog");
1022 goto out_err;
1023 }
1024
1025 /* Other attributes */
1026 ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
1027 if (ret) {
1028 printk(KERN_INFO "gsmi: Failed to add attrs");
1029 goto out_remove_bin_file;
1030 }
1031
1032 #ifdef CONFIG_EFI
1033 ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj);
1034 if (ret) {
1035 printk(KERN_INFO "gsmi: Failed to register efivars\n");
1036 sysfs_remove_files(gsmi_kobj, gsmi_attrs);
1037 goto out_remove_bin_file;
1038 }
1039 #endif
1040
1041 register_reboot_notifier(&gsmi_reboot_notifier);
1042 register_die_notifier(&gsmi_die_notifier);
1043 atomic_notifier_chain_register(&panic_notifier_list,
1044 &gsmi_panic_notifier);
1045
1046 printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
1047
1048 return 0;
1049
1050 out_remove_bin_file:
1051 sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
1052 out_err:
1053 kobject_put(gsmi_kobj);
1054 gsmi_buf_free(gsmi_dev.param_buf);
1055 gsmi_buf_free(gsmi_dev.data_buf);
1056 gsmi_buf_free(gsmi_dev.name_buf);
1057 kmem_cache_destroy(gsmi_dev.mem_pool);
1058 platform_device_unregister(gsmi_dev.pdev);
1059 pr_info("gsmi: failed to load: %d\n", ret);
1060 #ifdef CONFIG_PM
1061 platform_driver_unregister(&gsmi_driver_info);
1062 #endif
1063 return ret;
1064 }
1065
gsmi_exit(void)1066 static void __exit gsmi_exit(void)
1067 {
1068 unregister_reboot_notifier(&gsmi_reboot_notifier);
1069 unregister_die_notifier(&gsmi_die_notifier);
1070 atomic_notifier_chain_unregister(&panic_notifier_list,
1071 &gsmi_panic_notifier);
1072 #ifdef CONFIG_EFI
1073 efivars_unregister(&efivars);
1074 #endif
1075
1076 sysfs_remove_files(gsmi_kobj, gsmi_attrs);
1077 sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
1078 kobject_put(gsmi_kobj);
1079 gsmi_buf_free(gsmi_dev.param_buf);
1080 gsmi_buf_free(gsmi_dev.data_buf);
1081 gsmi_buf_free(gsmi_dev.name_buf);
1082 kmem_cache_destroy(gsmi_dev.mem_pool);
1083 platform_device_unregister(gsmi_dev.pdev);
1084 #ifdef CONFIG_PM
1085 platform_driver_unregister(&gsmi_driver_info);
1086 #endif
1087 }
1088
1089 module_init(gsmi_init);
1090 module_exit(gsmi_exit);
1091
1092 MODULE_AUTHOR("Google, Inc.");
1093 MODULE_LICENSE("GPL");
1094