1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Freescale LINFlexD UART serial port driver
4 *
5 * Copyright 2012-2016 Freescale Semiconductor, Inc.
6 * Copyright 2017-2019 NXP
7 */
8
9 #include <linux/console.h>
10 #include <linux/io.h>
11 #include <linux/irq.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/of_device.h>
15 #include <linux/serial_core.h>
16 #include <linux/slab.h>
17 #include <linux/tty_flip.h>
18 #include <linux/delay.h>
19
20 /* All registers are 32-bit width */
21
22 #define LINCR1 0x0000 /* LIN control register */
23 #define LINIER 0x0004 /* LIN interrupt enable register */
24 #define LINSR 0x0008 /* LIN status register */
25 #define LINESR 0x000C /* LIN error status register */
26 #define UARTCR 0x0010 /* UART mode control register */
27 #define UARTSR 0x0014 /* UART mode status register */
28 #define LINTCSR 0x0018 /* LIN timeout control status register */
29 #define LINOCR 0x001C /* LIN output compare register */
30 #define LINTOCR 0x0020 /* LIN timeout control register */
31 #define LINFBRR 0x0024 /* LIN fractional baud rate register */
32 #define LINIBRR 0x0028 /* LIN integer baud rate register */
33 #define LINCFR 0x002C /* LIN checksum field register */
34 #define LINCR2 0x0030 /* LIN control register 2 */
35 #define BIDR 0x0034 /* Buffer identifier register */
36 #define BDRL 0x0038 /* Buffer data register least significant */
37 #define BDRM 0x003C /* Buffer data register most significant */
38 #define IFER 0x0040 /* Identifier filter enable register */
39 #define IFMI 0x0044 /* Identifier filter match index */
40 #define IFMR 0x0048 /* Identifier filter mode register */
41 #define GCR 0x004C /* Global control register */
42 #define UARTPTO 0x0050 /* UART preset timeout register */
43 #define UARTCTO 0x0054 /* UART current timeout register */
44
45 /*
46 * Register field definitions
47 */
48
49 #define LINFLEXD_LINCR1_INIT BIT(0)
50 #define LINFLEXD_LINCR1_MME BIT(4)
51 #define LINFLEXD_LINCR1_BF BIT(7)
52
53 #define LINFLEXD_LINSR_LINS_INITMODE BIT(12)
54 #define LINFLEXD_LINSR_LINS_MASK (0xF << 12)
55
56 #define LINFLEXD_LINIER_SZIE BIT(15)
57 #define LINFLEXD_LINIER_OCIE BIT(14)
58 #define LINFLEXD_LINIER_BEIE BIT(13)
59 #define LINFLEXD_LINIER_CEIE BIT(12)
60 #define LINFLEXD_LINIER_HEIE BIT(11)
61 #define LINFLEXD_LINIER_FEIE BIT(8)
62 #define LINFLEXD_LINIER_BOIE BIT(7)
63 #define LINFLEXD_LINIER_LSIE BIT(6)
64 #define LINFLEXD_LINIER_WUIE BIT(5)
65 #define LINFLEXD_LINIER_DBFIE BIT(4)
66 #define LINFLEXD_LINIER_DBEIETOIE BIT(3)
67 #define LINFLEXD_LINIER_DRIE BIT(2)
68 #define LINFLEXD_LINIER_DTIE BIT(1)
69 #define LINFLEXD_LINIER_HRIE BIT(0)
70
71 #define LINFLEXD_UARTCR_OSR_MASK (0xF << 24)
72 #define LINFLEXD_UARTCR_OSR(uartcr) (((uartcr) \
73 & LINFLEXD_UARTCR_OSR_MASK) >> 24)
74
75 #define LINFLEXD_UARTCR_ROSE BIT(23)
76
77 #define LINFLEXD_UARTCR_RFBM BIT(9)
78 #define LINFLEXD_UARTCR_TFBM BIT(8)
79 #define LINFLEXD_UARTCR_WL1 BIT(7)
80 #define LINFLEXD_UARTCR_PC1 BIT(6)
81
82 #define LINFLEXD_UARTCR_RXEN BIT(5)
83 #define LINFLEXD_UARTCR_TXEN BIT(4)
84 #define LINFLEXD_UARTCR_PC0 BIT(3)
85
86 #define LINFLEXD_UARTCR_PCE BIT(2)
87 #define LINFLEXD_UARTCR_WL0 BIT(1)
88 #define LINFLEXD_UARTCR_UART BIT(0)
89
90 #define LINFLEXD_UARTSR_SZF BIT(15)
91 #define LINFLEXD_UARTSR_OCF BIT(14)
92 #define LINFLEXD_UARTSR_PE3 BIT(13)
93 #define LINFLEXD_UARTSR_PE2 BIT(12)
94 #define LINFLEXD_UARTSR_PE1 BIT(11)
95 #define LINFLEXD_UARTSR_PE0 BIT(10)
96 #define LINFLEXD_UARTSR_RMB BIT(9)
97 #define LINFLEXD_UARTSR_FEF BIT(8)
98 #define LINFLEXD_UARTSR_BOF BIT(7)
99 #define LINFLEXD_UARTSR_RPS BIT(6)
100 #define LINFLEXD_UARTSR_WUF BIT(5)
101 #define LINFLEXD_UARTSR_4 BIT(4)
102
103 #define LINFLEXD_UARTSR_TO BIT(3)
104
105 #define LINFLEXD_UARTSR_DRFRFE BIT(2)
106 #define LINFLEXD_UARTSR_DTFTFF BIT(1)
107 #define LINFLEXD_UARTSR_NF BIT(0)
108 #define LINFLEXD_UARTSR_PE (LINFLEXD_UARTSR_PE0 |\
109 LINFLEXD_UARTSR_PE1 |\
110 LINFLEXD_UARTSR_PE2 |\
111 LINFLEXD_UARTSR_PE3)
112
113 #define LINFLEX_LDIV_MULTIPLIER (16)
114
115 #define DRIVER_NAME "fsl-linflexuart"
116 #define DEV_NAME "ttyLF"
117 #define UART_NR 4
118
119 #define EARLYCON_BUFFER_INITIAL_CAP 8
120
121 #define PREINIT_DELAY 2000 /* us */
122
123 static const struct of_device_id linflex_dt_ids[] = {
124 {
125 .compatible = "fsl,s32v234-linflexuart",
126 },
127 { /* sentinel */ }
128 };
129 MODULE_DEVICE_TABLE(of, linflex_dt_ids);
130
131 #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
132 static struct uart_port *earlycon_port;
133 static bool linflex_earlycon_same_instance;
134 static DEFINE_SPINLOCK(init_lock);
135 static bool during_init;
136
137 static struct {
138 char *content;
139 unsigned int len, cap;
140 } earlycon_buf;
141 #endif
142
linflex_stop_tx(struct uart_port * port)143 static void linflex_stop_tx(struct uart_port *port)
144 {
145 unsigned long ier;
146
147 ier = readl(port->membase + LINIER);
148 ier &= ~(LINFLEXD_LINIER_DTIE);
149 writel(ier, port->membase + LINIER);
150 }
151
linflex_stop_rx(struct uart_port * port)152 static void linflex_stop_rx(struct uart_port *port)
153 {
154 unsigned long ier;
155
156 ier = readl(port->membase + LINIER);
157 writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER);
158 }
159
linflex_transmit_buffer(struct uart_port * sport)160 static inline void linflex_transmit_buffer(struct uart_port *sport)
161 {
162 struct circ_buf *xmit = &sport->state->xmit;
163 unsigned char c;
164 unsigned long status;
165
166 while (!uart_circ_empty(xmit)) {
167 c = xmit->buf[xmit->tail];
168 writeb(c, sport->membase + BDRL);
169
170 /* Waiting for data transmission completed. */
171 while (((status = readl(sport->membase + UARTSR)) &
172 LINFLEXD_UARTSR_DTFTFF) !=
173 LINFLEXD_UARTSR_DTFTFF)
174 ;
175
176 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
177 sport->icount.tx++;
178
179 writel(status | LINFLEXD_UARTSR_DTFTFF,
180 sport->membase + UARTSR);
181 }
182
183 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
184 uart_write_wakeup(sport);
185
186 if (uart_circ_empty(xmit))
187 linflex_stop_tx(sport);
188 }
189
linflex_start_tx(struct uart_port * port)190 static void linflex_start_tx(struct uart_port *port)
191 {
192 unsigned long ier;
193
194 linflex_transmit_buffer(port);
195 ier = readl(port->membase + LINIER);
196 writel(ier | LINFLEXD_LINIER_DTIE, port->membase + LINIER);
197 }
198
linflex_txint(int irq,void * dev_id)199 static irqreturn_t linflex_txint(int irq, void *dev_id)
200 {
201 struct uart_port *sport = dev_id;
202 struct circ_buf *xmit = &sport->state->xmit;
203 unsigned long flags;
204 unsigned long status;
205
206 spin_lock_irqsave(&sport->lock, flags);
207
208 if (sport->x_char) {
209 writeb(sport->x_char, sport->membase + BDRL);
210
211 /* waiting for data transmission completed */
212 while (((status = readl(sport->membase + UARTSR)) &
213 LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF)
214 ;
215
216 writel(status | LINFLEXD_UARTSR_DTFTFF,
217 sport->membase + UARTSR);
218
219 goto out;
220 }
221
222 if (uart_circ_empty(xmit) || uart_tx_stopped(sport)) {
223 linflex_stop_tx(sport);
224 goto out;
225 }
226
227 linflex_transmit_buffer(sport);
228
229 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
230 uart_write_wakeup(sport);
231
232 out:
233 spin_unlock_irqrestore(&sport->lock, flags);
234 return IRQ_HANDLED;
235 }
236
linflex_rxint(int irq,void * dev_id)237 static irqreturn_t linflex_rxint(int irq, void *dev_id)
238 {
239 struct uart_port *sport = dev_id;
240 unsigned int flg;
241 struct tty_port *port = &sport->state->port;
242 unsigned long flags, status;
243 unsigned char rx;
244 bool brk;
245
246 spin_lock_irqsave(&sport->lock, flags);
247
248 status = readl(sport->membase + UARTSR);
249 while (status & LINFLEXD_UARTSR_RMB) {
250 rx = readb(sport->membase + BDRM);
251 brk = false;
252 flg = TTY_NORMAL;
253 sport->icount.rx++;
254
255 if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF |
256 LINFLEXD_UARTSR_PE)) {
257 if (status & LINFLEXD_UARTSR_BOF)
258 sport->icount.overrun++;
259 if (status & LINFLEXD_UARTSR_FEF) {
260 if (!rx) {
261 brk = true;
262 sport->icount.brk++;
263 } else
264 sport->icount.frame++;
265 }
266 if (status & LINFLEXD_UARTSR_PE)
267 sport->icount.parity++;
268 }
269
270 writel(status, sport->membase + UARTSR);
271 status = readl(sport->membase + UARTSR);
272
273 if (brk) {
274 uart_handle_break(sport);
275 } else {
276 if (uart_handle_sysrq_char(sport, (unsigned char)rx))
277 continue;
278 tty_insert_flip_char(port, rx, flg);
279 }
280 }
281
282 spin_unlock_irqrestore(&sport->lock, flags);
283
284 tty_flip_buffer_push(port);
285
286 return IRQ_HANDLED;
287 }
288
linflex_int(int irq,void * dev_id)289 static irqreturn_t linflex_int(int irq, void *dev_id)
290 {
291 struct uart_port *sport = dev_id;
292 unsigned long status;
293
294 status = readl(sport->membase + UARTSR);
295
296 if (status & LINFLEXD_UARTSR_DRFRFE)
297 linflex_rxint(irq, dev_id);
298 if (status & LINFLEXD_UARTSR_DTFTFF)
299 linflex_txint(irq, dev_id);
300
301 return IRQ_HANDLED;
302 }
303
304 /* return TIOCSER_TEMT when transmitter is not busy */
linflex_tx_empty(struct uart_port * port)305 static unsigned int linflex_tx_empty(struct uart_port *port)
306 {
307 unsigned long status;
308
309 status = readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF;
310
311 return status ? TIOCSER_TEMT : 0;
312 }
313
linflex_get_mctrl(struct uart_port * port)314 static unsigned int linflex_get_mctrl(struct uart_port *port)
315 {
316 return 0;
317 }
318
linflex_set_mctrl(struct uart_port * port,unsigned int mctrl)319 static void linflex_set_mctrl(struct uart_port *port, unsigned int mctrl)
320 {
321 }
322
linflex_break_ctl(struct uart_port * port,int break_state)323 static void linflex_break_ctl(struct uart_port *port, int break_state)
324 {
325 }
326
linflex_setup_watermark(struct uart_port * sport)327 static void linflex_setup_watermark(struct uart_port *sport)
328 {
329 unsigned long cr, ier, cr1;
330
331 /* Disable transmission/reception */
332 ier = readl(sport->membase + LINIER);
333 ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
334 writel(ier, sport->membase + LINIER);
335
336 cr = readl(sport->membase + UARTCR);
337 cr &= ~(LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN);
338 writel(cr, sport->membase + UARTCR);
339
340 /* Enter initialization mode by setting INIT bit */
341
342 /* set the Linflex in master mode and activate by-pass filter */
343 cr1 = LINFLEXD_LINCR1_BF | LINFLEXD_LINCR1_MME
344 | LINFLEXD_LINCR1_INIT;
345 writel(cr1, sport->membase + LINCR1);
346
347 /* wait for init mode entry */
348 while ((readl(sport->membase + LINSR)
349 & LINFLEXD_LINSR_LINS_MASK)
350 != LINFLEXD_LINSR_LINS_INITMODE)
351 ;
352
353 /*
354 * UART = 0x1; - Linflex working in UART mode
355 * TXEN = 0x1; - Enable transmission of data now
356 * RXEn = 0x1; - Receiver enabled
357 * WL0 = 0x1; - 8 bit data
358 * PCE = 0x0; - No parity
359 */
360
361 /* set UART bit to allow writing other bits */
362 writel(LINFLEXD_UARTCR_UART, sport->membase + UARTCR);
363
364 cr = (LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN |
365 LINFLEXD_UARTCR_WL0 | LINFLEXD_UARTCR_UART);
366
367 writel(cr, sport->membase + UARTCR);
368
369 cr1 &= ~(LINFLEXD_LINCR1_INIT);
370
371 writel(cr1, sport->membase + LINCR1);
372
373 ier = readl(sport->membase + LINIER);
374 ier |= LINFLEXD_LINIER_DRIE;
375 ier |= LINFLEXD_LINIER_DTIE;
376
377 writel(ier, sport->membase + LINIER);
378 }
379
linflex_startup(struct uart_port * port)380 static int linflex_startup(struct uart_port *port)
381 {
382 int ret = 0;
383 unsigned long flags;
384
385 spin_lock_irqsave(&port->lock, flags);
386
387 linflex_setup_watermark(port);
388
389 spin_unlock_irqrestore(&port->lock, flags);
390
391 ret = devm_request_irq(port->dev, port->irq, linflex_int, 0,
392 DRIVER_NAME, port);
393
394 return ret;
395 }
396
linflex_shutdown(struct uart_port * port)397 static void linflex_shutdown(struct uart_port *port)
398 {
399 unsigned long ier;
400 unsigned long flags;
401
402 spin_lock_irqsave(&port->lock, flags);
403
404 /* disable interrupts */
405 ier = readl(port->membase + LINIER);
406 ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
407 writel(ier, port->membase + LINIER);
408
409 spin_unlock_irqrestore(&port->lock, flags);
410
411 devm_free_irq(port->dev, port->irq, port);
412 }
413
414 static void
linflex_set_termios(struct uart_port * port,struct ktermios * termios,struct ktermios * old)415 linflex_set_termios(struct uart_port *port, struct ktermios *termios,
416 struct ktermios *old)
417 {
418 unsigned long flags;
419 unsigned long cr, old_cr, cr1;
420 unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
421
422 cr = readl(port->membase + UARTCR);
423 old_cr = cr;
424
425 /* Enter initialization mode by setting INIT bit */
426 cr1 = readl(port->membase + LINCR1);
427 cr1 |= LINFLEXD_LINCR1_INIT;
428 writel(cr1, port->membase + LINCR1);
429
430 /* wait for init mode entry */
431 while ((readl(port->membase + LINSR)
432 & LINFLEXD_LINSR_LINS_MASK)
433 != LINFLEXD_LINSR_LINS_INITMODE)
434 ;
435
436 /*
437 * only support CS8 and CS7, and for CS7 must enable PE.
438 * supported mode:
439 * - (7,e/o,1)
440 * - (8,n,1)
441 * - (8,e/o,1)
442 */
443 /* enter the UART into configuration mode */
444
445 while ((termios->c_cflag & CSIZE) != CS8 &&
446 (termios->c_cflag & CSIZE) != CS7) {
447 termios->c_cflag &= ~CSIZE;
448 termios->c_cflag |= old_csize;
449 old_csize = CS8;
450 }
451
452 if ((termios->c_cflag & CSIZE) == CS7) {
453 /* Word length: WL1WL0:00 */
454 cr = old_cr & ~LINFLEXD_UARTCR_WL1 & ~LINFLEXD_UARTCR_WL0;
455 }
456
457 if ((termios->c_cflag & CSIZE) == CS8) {
458 /* Word length: WL1WL0:01 */
459 cr = (old_cr | LINFLEXD_UARTCR_WL0) & ~LINFLEXD_UARTCR_WL1;
460 }
461
462 if (termios->c_cflag & CMSPAR) {
463 if ((termios->c_cflag & CSIZE) != CS8) {
464 termios->c_cflag &= ~CSIZE;
465 termios->c_cflag |= CS8;
466 }
467 /* has a space/sticky bit */
468 cr |= LINFLEXD_UARTCR_WL0;
469 }
470
471 if (termios->c_cflag & CSTOPB)
472 termios->c_cflag &= ~CSTOPB;
473
474 /* parity must be enabled when CS7 to match 8-bits format */
475 if ((termios->c_cflag & CSIZE) == CS7)
476 termios->c_cflag |= PARENB;
477
478 if ((termios->c_cflag & PARENB)) {
479 cr |= LINFLEXD_UARTCR_PCE;
480 if (termios->c_cflag & PARODD)
481 cr = (cr | LINFLEXD_UARTCR_PC0) &
482 (~LINFLEXD_UARTCR_PC1);
483 else
484 cr = cr & (~LINFLEXD_UARTCR_PC1 &
485 ~LINFLEXD_UARTCR_PC0);
486 } else {
487 cr &= ~LINFLEXD_UARTCR_PCE;
488 }
489
490 spin_lock_irqsave(&port->lock, flags);
491
492 port->read_status_mask = 0;
493
494 if (termios->c_iflag & INPCK)
495 port->read_status_mask |= (LINFLEXD_UARTSR_FEF |
496 LINFLEXD_UARTSR_PE0 |
497 LINFLEXD_UARTSR_PE1 |
498 LINFLEXD_UARTSR_PE2 |
499 LINFLEXD_UARTSR_PE3);
500 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
501 port->read_status_mask |= LINFLEXD_UARTSR_FEF;
502
503 /* characters to ignore */
504 port->ignore_status_mask = 0;
505 if (termios->c_iflag & IGNPAR)
506 port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
507 if (termios->c_iflag & IGNBRK) {
508 port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
509 /*
510 * if we're ignoring parity and break indicators,
511 * ignore overruns too (for real raw support).
512 */
513 if (termios->c_iflag & IGNPAR)
514 port->ignore_status_mask |= LINFLEXD_UARTSR_BOF;
515 }
516
517 writel(cr, port->membase + UARTCR);
518
519 cr1 &= ~(LINFLEXD_LINCR1_INIT);
520
521 writel(cr1, port->membase + LINCR1);
522
523 spin_unlock_irqrestore(&port->lock, flags);
524 }
525
linflex_type(struct uart_port * port)526 static const char *linflex_type(struct uart_port *port)
527 {
528 return "FSL_LINFLEX";
529 }
530
linflex_release_port(struct uart_port * port)531 static void linflex_release_port(struct uart_port *port)
532 {
533 /* nothing to do */
534 }
535
linflex_request_port(struct uart_port * port)536 static int linflex_request_port(struct uart_port *port)
537 {
538 return 0;
539 }
540
541 /* configure/auto-configure the port */
linflex_config_port(struct uart_port * port,int flags)542 static void linflex_config_port(struct uart_port *port, int flags)
543 {
544 if (flags & UART_CONFIG_TYPE)
545 port->type = PORT_LINFLEXUART;
546 }
547
548 static const struct uart_ops linflex_pops = {
549 .tx_empty = linflex_tx_empty,
550 .set_mctrl = linflex_set_mctrl,
551 .get_mctrl = linflex_get_mctrl,
552 .stop_tx = linflex_stop_tx,
553 .start_tx = linflex_start_tx,
554 .stop_rx = linflex_stop_rx,
555 .break_ctl = linflex_break_ctl,
556 .startup = linflex_startup,
557 .shutdown = linflex_shutdown,
558 .set_termios = linflex_set_termios,
559 .type = linflex_type,
560 .request_port = linflex_request_port,
561 .release_port = linflex_release_port,
562 .config_port = linflex_config_port,
563 };
564
565 static struct uart_port *linflex_ports[UART_NR];
566
567 #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
linflex_console_putchar(struct uart_port * port,int ch)568 static void linflex_console_putchar(struct uart_port *port, int ch)
569 {
570 unsigned long cr;
571
572 cr = readl(port->membase + UARTCR);
573
574 writeb(ch, port->membase + BDRL);
575
576 if (!(cr & LINFLEXD_UARTCR_TFBM))
577 while ((readl(port->membase + UARTSR) &
578 LINFLEXD_UARTSR_DTFTFF)
579 != LINFLEXD_UARTSR_DTFTFF)
580 ;
581 else
582 while (readl(port->membase + UARTSR) &
583 LINFLEXD_UARTSR_DTFTFF)
584 ;
585
586 if (!(cr & LINFLEXD_UARTCR_TFBM)) {
587 writel((readl(port->membase + UARTSR) |
588 LINFLEXD_UARTSR_DTFTFF),
589 port->membase + UARTSR);
590 }
591 }
592
linflex_earlycon_putchar(struct uart_port * port,int ch)593 static void linflex_earlycon_putchar(struct uart_port *port, int ch)
594 {
595 unsigned long flags;
596 char *ret;
597
598 if (!linflex_earlycon_same_instance) {
599 linflex_console_putchar(port, ch);
600 return;
601 }
602
603 spin_lock_irqsave(&init_lock, flags);
604 if (!during_init)
605 goto outside_init;
606
607 if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT)
608 goto init_release;
609
610 if (!earlycon_buf.cap) {
611 earlycon_buf.content = kmalloc(EARLYCON_BUFFER_INITIAL_CAP,
612 GFP_ATOMIC);
613 earlycon_buf.cap = earlycon_buf.content ?
614 EARLYCON_BUFFER_INITIAL_CAP : 0;
615 } else if (earlycon_buf.len == earlycon_buf.cap) {
616 ret = krealloc(earlycon_buf.content, earlycon_buf.cap << 1,
617 GFP_ATOMIC);
618 if (ret) {
619 earlycon_buf.content = ret;
620 earlycon_buf.cap <<= 1;
621 }
622 }
623
624 if (earlycon_buf.len < earlycon_buf.cap)
625 earlycon_buf.content[earlycon_buf.len++] = ch;
626
627 goto init_release;
628
629 outside_init:
630 linflex_console_putchar(port, ch);
631 init_release:
632 spin_unlock_irqrestore(&init_lock, flags);
633 }
634
linflex_string_write(struct uart_port * sport,const char * s,unsigned int count)635 static void linflex_string_write(struct uart_port *sport, const char *s,
636 unsigned int count)
637 {
638 unsigned long cr, ier = 0;
639
640 ier = readl(sport->membase + LINIER);
641 linflex_stop_tx(sport);
642
643 cr = readl(sport->membase + UARTCR);
644 cr |= (LINFLEXD_UARTCR_TXEN);
645 writel(cr, sport->membase + UARTCR);
646
647 uart_console_write(sport, s, count, linflex_console_putchar);
648
649 writel(ier, sport->membase + LINIER);
650 }
651
652 static void
linflex_console_write(struct console * co,const char * s,unsigned int count)653 linflex_console_write(struct console *co, const char *s, unsigned int count)
654 {
655 struct uart_port *sport = linflex_ports[co->index];
656 unsigned long flags;
657 int locked = 1;
658
659 if (sport->sysrq)
660 locked = 0;
661 else if (oops_in_progress)
662 locked = spin_trylock_irqsave(&sport->lock, flags);
663 else
664 spin_lock_irqsave(&sport->lock, flags);
665
666 linflex_string_write(sport, s, count);
667
668 if (locked)
669 spin_unlock_irqrestore(&sport->lock, flags);
670 }
671
672 /*
673 * if the port was already initialised (eg, by a boot loader),
674 * try to determine the current setup.
675 */
676 static void __init
linflex_console_get_options(struct uart_port * sport,int * parity,int * bits)677 linflex_console_get_options(struct uart_port *sport, int *parity, int *bits)
678 {
679 unsigned long cr;
680
681 cr = readl(sport->membase + UARTCR);
682 cr &= LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN;
683
684 if (!cr)
685 return;
686
687 /* ok, the port was enabled */
688
689 *parity = 'n';
690 if (cr & LINFLEXD_UARTCR_PCE) {
691 if (cr & LINFLEXD_UARTCR_PC0)
692 *parity = 'o';
693 else
694 *parity = 'e';
695 }
696
697 if ((cr & LINFLEXD_UARTCR_WL0) && ((cr & LINFLEXD_UARTCR_WL1) == 0)) {
698 if (cr & LINFLEXD_UARTCR_PCE)
699 *bits = 9;
700 else
701 *bits = 8;
702 }
703 }
704
linflex_console_setup(struct console * co,char * options)705 static int __init linflex_console_setup(struct console *co, char *options)
706 {
707 struct uart_port *sport;
708 int baud = 115200;
709 int bits = 8;
710 int parity = 'n';
711 int flow = 'n';
712 int ret;
713 int i;
714 unsigned long flags;
715 /*
716 * check whether an invalid uart number has been specified, and
717 * if so, search for the first available port that does have
718 * console support.
719 */
720 if (co->index == -1 || co->index >= ARRAY_SIZE(linflex_ports))
721 co->index = 0;
722
723 sport = linflex_ports[co->index];
724 if (!sport)
725 return -ENODEV;
726
727 if (options)
728 uart_parse_options(options, &baud, &parity, &bits, &flow);
729 else
730 linflex_console_get_options(sport, &parity, &bits);
731
732 if (earlycon_port && sport->mapbase == earlycon_port->mapbase) {
733 linflex_earlycon_same_instance = true;
734
735 spin_lock_irqsave(&init_lock, flags);
736 during_init = true;
737 spin_unlock_irqrestore(&init_lock, flags);
738
739 /* Workaround for character loss or output of many invalid
740 * characters, when INIT mode is entered shortly after a
741 * character has just been printed.
742 */
743 udelay(PREINIT_DELAY);
744 }
745
746 linflex_setup_watermark(sport);
747
748 ret = uart_set_options(sport, co, baud, parity, bits, flow);
749
750 if (!linflex_earlycon_same_instance)
751 goto done;
752
753 spin_lock_irqsave(&init_lock, flags);
754
755 /* Emptying buffer */
756 if (earlycon_buf.len) {
757 for (i = 0; i < earlycon_buf.len; i++)
758 linflex_console_putchar(earlycon_port,
759 earlycon_buf.content[i]);
760
761 kfree(earlycon_buf.content);
762 earlycon_buf.len = 0;
763 }
764
765 during_init = false;
766 spin_unlock_irqrestore(&init_lock, flags);
767
768 done:
769 return ret;
770 }
771
772 static struct uart_driver linflex_reg;
773 static struct console linflex_console = {
774 .name = DEV_NAME,
775 .write = linflex_console_write,
776 .device = uart_console_device,
777 .setup = linflex_console_setup,
778 .flags = CON_PRINTBUFFER,
779 .index = -1,
780 .data = &linflex_reg,
781 };
782
linflex_earlycon_write(struct console * con,const char * s,unsigned int n)783 static void linflex_earlycon_write(struct console *con, const char *s,
784 unsigned int n)
785 {
786 struct earlycon_device *dev = con->data;
787
788 uart_console_write(&dev->port, s, n, linflex_earlycon_putchar);
789 }
790
linflex_early_console_setup(struct earlycon_device * device,const char * options)791 static int __init linflex_early_console_setup(struct earlycon_device *device,
792 const char *options)
793 {
794 if (!device->port.membase)
795 return -ENODEV;
796
797 device->con->write = linflex_earlycon_write;
798 earlycon_port = &device->port;
799
800 return 0;
801 }
802
803 OF_EARLYCON_DECLARE(linflex, "fsl,s32v234-linflexuart",
804 linflex_early_console_setup);
805
806 #define LINFLEX_CONSOLE (&linflex_console)
807 #else
808 #define LINFLEX_CONSOLE NULL
809 #endif
810
811 static struct uart_driver linflex_reg = {
812 .owner = THIS_MODULE,
813 .driver_name = DRIVER_NAME,
814 .dev_name = DEV_NAME,
815 .nr = ARRAY_SIZE(linflex_ports),
816 .cons = LINFLEX_CONSOLE,
817 };
818
linflex_probe(struct platform_device * pdev)819 static int linflex_probe(struct platform_device *pdev)
820 {
821 struct device_node *np = pdev->dev.of_node;
822 struct uart_port *sport;
823 struct resource *res;
824 int ret;
825
826 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
827 if (!sport)
828 return -ENOMEM;
829
830 ret = of_alias_get_id(np, "serial");
831 if (ret < 0) {
832 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
833 return ret;
834 }
835 if (ret >= UART_NR) {
836 dev_err(&pdev->dev, "driver limited to %d serial ports\n",
837 UART_NR);
838 return -ENOMEM;
839 }
840
841 sport->line = ret;
842
843 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
844 if (!res)
845 return -ENODEV;
846
847 sport->mapbase = res->start;
848 sport->membase = devm_ioremap_resource(&pdev->dev, res);
849 if (IS_ERR(sport->membase))
850 return PTR_ERR(sport->membase);
851
852 sport->dev = &pdev->dev;
853 sport->type = PORT_LINFLEXUART;
854 sport->iotype = UPIO_MEM;
855 sport->irq = platform_get_irq(pdev, 0);
856 sport->ops = &linflex_pops;
857 sport->flags = UPF_BOOT_AUTOCONF;
858 sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE);
859
860 linflex_ports[sport->line] = sport;
861
862 platform_set_drvdata(pdev, sport);
863
864 return uart_add_one_port(&linflex_reg, sport);
865 }
866
linflex_remove(struct platform_device * pdev)867 static int linflex_remove(struct platform_device *pdev)
868 {
869 struct uart_port *sport = platform_get_drvdata(pdev);
870
871 uart_remove_one_port(&linflex_reg, sport);
872
873 return 0;
874 }
875
876 #ifdef CONFIG_PM_SLEEP
linflex_suspend(struct device * dev)877 static int linflex_suspend(struct device *dev)
878 {
879 struct uart_port *sport = dev_get_drvdata(dev);
880
881 uart_suspend_port(&linflex_reg, sport);
882
883 return 0;
884 }
885
linflex_resume(struct device * dev)886 static int linflex_resume(struct device *dev)
887 {
888 struct uart_port *sport = dev_get_drvdata(dev);
889
890 uart_resume_port(&linflex_reg, sport);
891
892 return 0;
893 }
894 #endif
895
896 static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume);
897
898 static struct platform_driver linflex_driver = {
899 .probe = linflex_probe,
900 .remove = linflex_remove,
901 .driver = {
902 .name = DRIVER_NAME,
903 .of_match_table = linflex_dt_ids,
904 .pm = &linflex_pm_ops,
905 },
906 };
907
linflex_serial_init(void)908 static int __init linflex_serial_init(void)
909 {
910 int ret;
911
912 ret = uart_register_driver(&linflex_reg);
913 if (ret)
914 return ret;
915
916 ret = platform_driver_register(&linflex_driver);
917 if (ret)
918 uart_unregister_driver(&linflex_reg);
919
920 return ret;
921 }
922
linflex_serial_exit(void)923 static void __exit linflex_serial_exit(void)
924 {
925 platform_driver_unregister(&linflex_driver);
926 uart_unregister_driver(&linflex_reg);
927 }
928
929 module_init(linflex_serial_init);
930 module_exit(linflex_serial_exit);
931
932 MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
933 MODULE_LICENSE("GPL v2");
934