1 /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
2 /*
3 * hcd.h - DesignWare HS OTG Controller host-mode declarations
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. The names of the above-listed copyright holders may not be used
17 * to endorse or promote products derived from this software without
18 * specific prior written permission.
19 *
20 * ALTERNATIVELY, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") as published by the Free Software
22 * Foundation; either version 2 of the License, or (at your option) any
23 * later version.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
36 */
37 #ifndef __DWC2_HCD_H__
38 #define __DWC2_HCD_H__
39
40 /*
41 * This file contains the structures, constants, and interfaces for the
42 * Host Contoller Driver (HCD)
43 *
44 * The Host Controller Driver (HCD) is responsible for translating requests
45 * from the USB Driver into the appropriate actions on the DWC_otg controller.
46 * It isolates the USBD from the specifics of the controller by providing an
47 * API to the USBD.
48 */
49
50 struct dwc2_qh;
51
52 /**
53 * struct dwc2_host_chan - Software host channel descriptor
54 *
55 * @hc_num: Host channel number, used for register address lookup
56 * @dev_addr: Address of the device
57 * @ep_num: Endpoint of the device
58 * @ep_is_in: Endpoint direction
59 * @speed: Device speed. One of the following values:
60 * - USB_SPEED_LOW
61 * - USB_SPEED_FULL
62 * - USB_SPEED_HIGH
63 * @ep_type: Endpoint type. One of the following values:
64 * - USB_ENDPOINT_XFER_CONTROL: 0
65 * - USB_ENDPOINT_XFER_ISOC: 1
66 * - USB_ENDPOINT_XFER_BULK: 2
67 * - USB_ENDPOINT_XFER_INTR: 3
68 * @max_packet: Max packet size in bytes
69 * @data_pid_start: PID for initial transaction.
70 * 0: DATA0
71 * 1: DATA2
72 * 2: DATA1
73 * 3: MDATA (non-Control EP),
74 * SETUP (Control EP)
75 * @multi_count: Number of additional periodic transactions per
76 * (micro)frame
77 * @xfer_buf: Pointer to current transfer buffer position
78 * @xfer_dma: DMA address of xfer_buf
79 * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not
80 * DWORD aligned
81 * @xfer_len: Total number of bytes to transfer
82 * @xfer_count: Number of bytes transferred so far
83 * @start_pkt_count: Packet count at start of transfer
84 * @xfer_started: True if the transfer has been started
85 * @do_ping: True if a PING request should be issued on this channel
86 * @error_state: True if the error count for this transaction is non-zero
87 * @halt_on_queue: True if this channel should be halted the next time a
88 * request is queued for the channel. This is necessary in
89 * slave mode if no request queue space is available when
90 * an attempt is made to halt the channel.
91 * @halt_pending: True if the host channel has been halted, but the core
92 * is not finished flushing queued requests
93 * @do_split: Enable split for the channel
94 * @complete_split: Enable complete split
95 * @hub_addr: Address of high speed hub for the split
96 * @hub_port: Port of the low/full speed device for the split
97 * @xact_pos: Split transaction position. One of the following values:
98 * - DWC2_HCSPLT_XACTPOS_MID
99 * - DWC2_HCSPLT_XACTPOS_BEGIN
100 * - DWC2_HCSPLT_XACTPOS_END
101 * - DWC2_HCSPLT_XACTPOS_ALL
102 * @requests: Number of requests issued for this channel since it was
103 * assigned to the current transfer (not counting PINGs)
104 * @schinfo: Scheduling micro-frame bitmap
105 * @ntd: Number of transfer descriptors for the transfer
106 * @halt_status: Reason for halting the host channel
107 * @hcint: Contents of the HCINT register when the interrupt came
108 * @qh: QH for the transfer being processed by this channel
109 * @hc_list_entry: For linking to list of host channels
110 * @desc_list_addr: Current QH's descriptor list DMA address
111 * @desc_list_sz: Current QH's descriptor list size
112 * @split_order_list_entry: List entry for keeping track of the order of splits
113 *
114 * This structure represents the state of a single host channel when acting in
115 * host mode. It contains the data items needed to transfer packets to an
116 * endpoint via a host channel.
117 */
118 struct dwc2_host_chan {
119 u8 hc_num;
120
121 unsigned dev_addr:7;
122 unsigned ep_num:4;
123 unsigned ep_is_in:1;
124 unsigned speed:4;
125 unsigned ep_type:2;
126 unsigned max_packet:11;
127 unsigned data_pid_start:2;
128 #define DWC2_HC_PID_DATA0 TSIZ_SC_MC_PID_DATA0
129 #define DWC2_HC_PID_DATA2 TSIZ_SC_MC_PID_DATA2
130 #define DWC2_HC_PID_DATA1 TSIZ_SC_MC_PID_DATA1
131 #define DWC2_HC_PID_MDATA TSIZ_SC_MC_PID_MDATA
132 #define DWC2_HC_PID_SETUP TSIZ_SC_MC_PID_SETUP
133
134 unsigned multi_count:2;
135
136 u8 *xfer_buf;
137 dma_addr_t xfer_dma;
138 dma_addr_t align_buf;
139 u32 xfer_len;
140 u32 xfer_count;
141 u16 start_pkt_count;
142 u8 xfer_started;
143 u8 do_ping;
144 u8 error_state;
145 u8 halt_on_queue;
146 u8 halt_pending;
147 u8 do_split;
148 u8 complete_split;
149 u8 hub_addr;
150 u8 hub_port;
151 u8 xact_pos;
152 #define DWC2_HCSPLT_XACTPOS_MID HCSPLT_XACTPOS_MID
153 #define DWC2_HCSPLT_XACTPOS_END HCSPLT_XACTPOS_END
154 #define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN
155 #define DWC2_HCSPLT_XACTPOS_ALL HCSPLT_XACTPOS_ALL
156
157 u8 requests;
158 u8 schinfo;
159 u16 ntd;
160 enum dwc2_halt_status halt_status;
161 u32 hcint;
162 struct dwc2_qh *qh;
163 struct list_head hc_list_entry;
164 dma_addr_t desc_list_addr;
165 u32 desc_list_sz;
166 struct list_head split_order_list_entry;
167 };
168
169 struct dwc2_hcd_pipe_info {
170 u8 dev_addr;
171 u8 ep_num;
172 u8 pipe_type;
173 u8 pipe_dir;
174 u16 maxp;
175 u16 maxp_mult;
176 };
177
178 struct dwc2_hcd_iso_packet_desc {
179 u32 offset;
180 u32 length;
181 u32 actual_length;
182 u32 status;
183 };
184
185 struct dwc2_qtd;
186
187 struct dwc2_hcd_urb {
188 void *priv;
189 struct dwc2_qtd *qtd;
190 void *buf;
191 dma_addr_t dma;
192 void *setup_packet;
193 dma_addr_t setup_dma;
194 u32 length;
195 u32 actual_length;
196 u32 status;
197 u32 error_count;
198 u32 packet_count;
199 u32 flags;
200 u16 interval;
201 struct dwc2_hcd_pipe_info pipe_info;
202 struct dwc2_hcd_iso_packet_desc iso_descs[];
203 };
204
205 /* Phases for control transfers */
206 enum dwc2_control_phase {
207 DWC2_CONTROL_SETUP,
208 DWC2_CONTROL_DATA,
209 DWC2_CONTROL_STATUS,
210 };
211
212 /* Transaction types */
213 enum dwc2_transaction_type {
214 DWC2_TRANSACTION_NONE,
215 DWC2_TRANSACTION_PERIODIC,
216 DWC2_TRANSACTION_NON_PERIODIC,
217 DWC2_TRANSACTION_ALL,
218 };
219
220 /* The number of elements per LS bitmap (per port on multi_tt) */
221 #define DWC2_ELEMENTS_PER_LS_BITMAP DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \
222 BITS_PER_LONG)
223
224 /**
225 * struct dwc2_tt - dwc2 data associated with a usb_tt
226 *
227 * @refcount: Number of Queue Heads (QHs) holding a reference.
228 * @usb_tt: Pointer back to the official usb_tt.
229 * @periodic_bitmaps: Bitmap for which parts of the 1ms frame are accounted
230 * for already. Each is DWC2_ELEMENTS_PER_LS_BITMAP
231 * elements (so sizeof(long) times that in bytes).
232 *
233 * This structure is stored in the hcpriv of the official usb_tt.
234 */
235 struct dwc2_tt {
236 int refcount;
237 struct usb_tt *usb_tt;
238 unsigned long periodic_bitmaps[];
239 };
240
241 /**
242 * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus.
243 *
244 * @start_schedule_us: The start time on the main bus schedule. Note that
245 * the main bus schedule is tightly packed and this
246 * time should be interpreted as tightly packed (so
247 * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us
248 * instead of 125 us).
249 * @duration_us: How long this transfer goes.
250 */
251
252 struct dwc2_hs_transfer_time {
253 u32 start_schedule_us;
254 u16 duration_us;
255 };
256
257 /**
258 * struct dwc2_qh - Software queue head structure
259 *
260 * @hsotg: The HCD state structure for the DWC OTG controller
261 * @ep_type: Endpoint type. One of the following values:
262 * - USB_ENDPOINT_XFER_CONTROL
263 * - USB_ENDPOINT_XFER_BULK
264 * - USB_ENDPOINT_XFER_INT
265 * - USB_ENDPOINT_XFER_ISOC
266 * @ep_is_in: Endpoint direction
267 * @maxp: Value from wMaxPacketSize field of Endpoint Descriptor
268 * @maxp_mult: Multiplier for maxp
269 * @dev_speed: Device speed. One of the following values:
270 * - USB_SPEED_LOW
271 * - USB_SPEED_FULL
272 * - USB_SPEED_HIGH
273 * @data_toggle: Determines the PID of the next data packet for
274 * non-controltransfers. Ignored for control transfers.
275 * One of the following values:
276 * - DWC2_HC_PID_DATA0
277 * - DWC2_HC_PID_DATA1
278 * @ping_state: Ping state
279 * @do_split: Full/low speed endpoint on high-speed hub requires split
280 * @td_first: Index of first activated isochronous transfer descriptor
281 * @td_last: Index of last activated isochronous transfer descriptor
282 * @host_us: Bandwidth in microseconds per transfer as seen by host
283 * @device_us: Bandwidth in microseconds per transfer as seen by device
284 * @host_interval: Interval between transfers as seen by the host. If
285 * the host is high speed and the device is low speed this
286 * will be 8 times device interval.
287 * @device_interval: Interval between transfers as seen by the device.
288 * interval.
289 * @next_active_frame: (Micro)frame _before_ we next need to put something on
290 * the bus. We'll move the qh to active here. If the
291 * host is in high speed mode this will be a uframe. If
292 * the host is in low speed mode this will be a full frame.
293 * @start_active_frame: If we are partway through a split transfer, this will be
294 * what next_active_frame was when we started. Otherwise
295 * it should always be the same as next_active_frame.
296 * @num_hs_transfers: Number of transfers in hs_transfers.
297 * Normally this is 1 but can be more than one for splits.
298 * Always >= 1 unless the host is in low/full speed mode.
299 * @hs_transfers: Transfers that are scheduled as seen by the high speed
300 * bus. Not used if host is in low or full speed mode (but
301 * note that it IS USED if the device is low or full speed
302 * as long as the HOST is in high speed mode).
303 * @ls_start_schedule_slice: Start time (in slices) on the low speed bus
304 * schedule that's being used by this device. This
305 * will be on the periodic_bitmap in a
306 * "struct dwc2_tt". Not used if this device is high
307 * speed. Note that this is in "schedule slice" which
308 * is tightly packed.
309 * @ntd: Actual number of transfer descriptors in a list
310 * @dw_align_buf: Used instead of original buffer if its physical address
311 * is not dword-aligned
312 * @dw_align_buf_dma: DMA address for dw_align_buf
313 * @qtd_list: List of QTDs for this QH
314 * @channel: Host channel currently processing transfers for this QH
315 * @qh_list_entry: Entry for QH in either the periodic or non-periodic
316 * schedule
317 * @desc_list: List of transfer descriptors
318 * @desc_list_dma: Physical address of desc_list
319 * @desc_list_sz: Size of descriptors list
320 * @n_bytes: Xfer Bytes array. Each element corresponds to a transfer
321 * descriptor and indicates original XferSize value for the
322 * descriptor
323 * @unreserve_timer: Timer for releasing periodic reservation.
324 * @wait_timer: Timer used to wait before re-queuing.
325 * @dwc_tt: Pointer to our tt info (or NULL if no tt).
326 * @ttport: Port number within our tt.
327 * @tt_buffer_dirty True if clear_tt_buffer_complete is pending
328 * @unreserve_pending: True if we planned to unreserve but haven't yet.
329 * @schedule_low_speed: True if we have a low/full speed component (either the
330 * host is in low/full speed mode or do_split).
331 * @want_wait: We should wait before re-queuing; only matters for non-
332 * periodic transfers and is ignored for periodic ones.
333 * @wait_timer_cancel: Set to true to cancel the wait_timer.
334 *
335 * @tt_buffer_dirty: True if EP's TT buffer is not clean.
336 * A Queue Head (QH) holds the static characteristics of an endpoint and
337 * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
338 * be entered in either the non-periodic or periodic schedule.
339 */
340 struct dwc2_qh {
341 struct dwc2_hsotg *hsotg;
342 u8 ep_type;
343 u8 ep_is_in;
344 u16 maxp;
345 u16 maxp_mult;
346 u8 dev_speed;
347 u8 data_toggle;
348 u8 ping_state;
349 u8 do_split;
350 u8 td_first;
351 u8 td_last;
352 u16 host_us;
353 u16 device_us;
354 u16 host_interval;
355 u16 device_interval;
356 u16 next_active_frame;
357 u16 start_active_frame;
358 s16 num_hs_transfers;
359 struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
360 u32 ls_start_schedule_slice;
361 u16 ntd;
362 u8 *dw_align_buf;
363 dma_addr_t dw_align_buf_dma;
364 struct list_head qtd_list;
365 struct dwc2_host_chan *channel;
366 struct list_head qh_list_entry;
367 struct dwc2_dma_desc *desc_list;
368 dma_addr_t desc_list_dma;
369 u32 desc_list_sz;
370 u32 *n_bytes;
371 struct timer_list unreserve_timer;
372 struct hrtimer wait_timer;
373 struct dwc2_tt *dwc_tt;
374 int ttport;
375 unsigned tt_buffer_dirty:1;
376 unsigned unreserve_pending:1;
377 unsigned schedule_low_speed:1;
378 unsigned want_wait:1;
379 unsigned wait_timer_cancel:1;
380 };
381
382 /**
383 * struct dwc2_qtd - Software queue transfer descriptor (QTD)
384 *
385 * @control_phase: Current phase for control transfers (Setup, Data, or
386 * Status)
387 * @in_process: Indicates if this QTD is currently processed by HW
388 * @data_toggle: Determines the PID of the next data packet for the
389 * data phase of control transfers. Ignored for other
390 * transfer types. One of the following values:
391 * - DWC2_HC_PID_DATA0
392 * - DWC2_HC_PID_DATA1
393 * @complete_split: Keeps track of the current split type for FS/LS
394 * endpoints on a HS Hub
395 * @isoc_split_pos: Position of the ISOC split in full/low speed
396 * @isoc_frame_index: Index of the next frame descriptor for an isochronous
397 * transfer. A frame descriptor describes the buffer
398 * position and length of the data to be transferred in the
399 * next scheduled (micro)frame of an isochronous transfer.
400 * It also holds status for that transaction. The frame
401 * index starts at 0.
402 * @isoc_split_offset: Position of the ISOC split in the buffer for the
403 * current frame
404 * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT
405 * @error_count: Holds the number of bus errors that have occurred for
406 * a transaction within this transfer
407 * @n_desc: Number of DMA descriptors for this QTD
408 * @isoc_frame_index_last: Last activated frame (packet) index, used in
409 * descriptor DMA mode only
410 * @num_naks: Number of NAKs received on this QTD.
411 * @urb: URB for this transfer
412 * @qh: Queue head for this QTD
413 * @qtd_list_entry: For linking to the QH's list of QTDs
414 * @isoc_td_first: Index of first activated isochronous transfer
415 * descriptor in Descriptor DMA mode
416 * @isoc_td_last: Index of last activated isochronous transfer
417 * descriptor in Descriptor DMA mode
418 *
419 * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
420 * interrupt, or isochronous transfer. A single QTD is created for each URB
421 * (of one of these types) submitted to the HCD. The transfer associated with
422 * a QTD may require one or multiple transactions.
423 *
424 * A QTD is linked to a Queue Head, which is entered in either the
425 * non-periodic or periodic schedule for execution. When a QTD is chosen for
426 * execution, some or all of its transactions may be executed. After
427 * execution, the state of the QTD is updated. The QTD may be retired if all
428 * its transactions are complete or if an error occurred. Otherwise, it
429 * remains in the schedule so more transactions can be executed later.
430 */
431 struct dwc2_qtd {
432 enum dwc2_control_phase control_phase;
433 u8 in_process;
434 u8 data_toggle;
435 u8 complete_split;
436 u8 isoc_split_pos;
437 u16 isoc_frame_index;
438 u16 isoc_split_offset;
439 u16 isoc_td_last;
440 u16 isoc_td_first;
441 u32 ssplit_out_xfer_count;
442 u8 error_count;
443 u8 n_desc;
444 u16 isoc_frame_index_last;
445 u16 num_naks;
446 struct dwc2_hcd_urb *urb;
447 struct dwc2_qh *qh;
448 struct list_head qtd_list_entry;
449 };
450
451 #ifdef DEBUG
452 struct hc_xfer_info {
453 struct dwc2_hsotg *hsotg;
454 struct dwc2_host_chan *chan;
455 };
456 #endif
457
458 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
459
460 /* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
dwc2_hsotg_to_hcd(struct dwc2_hsotg * hsotg)461 static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
462 {
463 return (struct usb_hcd *)hsotg->priv;
464 }
465
466 /*
467 * Inline used to disable one channel interrupt. Channel interrupts are
468 * disabled when the channel is halted or released by the interrupt handler.
469 * There is no need to handle further interrupts of that type until the
470 * channel is re-assigned. In fact, subsequent handling may cause crashes
471 * because the channel structures are cleaned up when the channel is released.
472 */
disable_hc_int(struct dwc2_hsotg * hsotg,int chnum,u32 intr)473 static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
474 {
475 u32 mask = dwc2_readl(hsotg, HCINTMSK(chnum));
476
477 mask &= ~intr;
478 dwc2_writel(hsotg, mask, HCINTMSK(chnum));
479 }
480
481 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
482 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
483 enum dwc2_halt_status halt_status);
484 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
485 struct dwc2_host_chan *chan);
486
487 /*
488 * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
489 * are read as 1, they won't clear when written back.
490 */
dwc2_read_hprt0(struct dwc2_hsotg * hsotg)491 static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
492 {
493 u32 hprt0 = dwc2_readl(hsotg, HPRT0);
494
495 hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
496 return hprt0;
497 }
498
dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info * pipe)499 static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe)
500 {
501 return pipe->ep_num;
502 }
503
dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info * pipe)504 static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
505 {
506 return pipe->pipe_type;
507 }
508
dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info * pipe)509 static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
510 {
511 return pipe->maxp;
512 }
513
dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info * pipe)514 static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
515 {
516 return pipe->maxp_mult;
517 }
518
dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info * pipe)519 static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
520 {
521 return pipe->dev_addr;
522 }
523
dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info * pipe)524 static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe)
525 {
526 return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC;
527 }
528
dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info * pipe)529 static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe)
530 {
531 return pipe->pipe_type == USB_ENDPOINT_XFER_INT;
532 }
533
dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info * pipe)534 static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe)
535 {
536 return pipe->pipe_type == USB_ENDPOINT_XFER_BULK;
537 }
538
dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info * pipe)539 static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe)
540 {
541 return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL;
542 }
543
dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info * pipe)544 static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe)
545 {
546 return pipe->pipe_dir == USB_DIR_IN;
547 }
548
dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info * pipe)549 static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe)
550 {
551 return !dwc2_hcd_is_pipe_in(pipe);
552 }
553
554 int dwc2_hcd_init(struct dwc2_hsotg *hsotg);
555 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg);
556
557 /* Transaction Execution Functions */
558 enum dwc2_transaction_type dwc2_hcd_select_transactions(
559 struct dwc2_hsotg *hsotg);
560 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
561 enum dwc2_transaction_type tr_type);
562
563 /* Schedule Queue Functions */
564 /* Implemented in hcd_queue.c */
565 struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
566 struct dwc2_hcd_urb *urb,
567 gfp_t mem_flags);
568 void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
569 int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
570 void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
571 void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
572 int sched_csplit);
573
574 void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb);
575 int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
576 struct dwc2_qh *qh);
577
578 /* Unlinks and frees a QTD */
dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg * hsotg,struct dwc2_qtd * qtd,struct dwc2_qh * qh)579 static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg,
580 struct dwc2_qtd *qtd,
581 struct dwc2_qh *qh)
582 {
583 list_del(&qtd->qtd_list_entry);
584 kfree(qtd);
585 }
586
587 /* Descriptor DMA support functions */
588 void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg,
589 struct dwc2_qh *qh);
590 void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg,
591 struct dwc2_host_chan *chan, int chnum,
592 enum dwc2_halt_status halt_status);
593
594 int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
595 gfp_t mem_flags);
596 void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh);
597
598 /* Check if QH is non-periodic */
599 #define dwc2_qh_is_non_per(_qh_ptr_) \
600 ((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \
601 (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL)
602
603 #ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC
dbg_hc(struct dwc2_host_chan * hc)604 static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; }
dbg_qh(struct dwc2_qh * qh)605 static inline bool dbg_qh(struct dwc2_qh *qh) { return true; }
dbg_urb(struct urb * urb)606 static inline bool dbg_urb(struct urb *urb) { return true; }
dbg_perio(void)607 static inline bool dbg_perio(void) { return true; }
608 #else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */
dbg_hc(struct dwc2_host_chan * hc)609 static inline bool dbg_hc(struct dwc2_host_chan *hc)
610 {
611 return hc->ep_type == USB_ENDPOINT_XFER_BULK ||
612 hc->ep_type == USB_ENDPOINT_XFER_CONTROL;
613 }
614
dbg_qh(struct dwc2_qh * qh)615 static inline bool dbg_qh(struct dwc2_qh *qh)
616 {
617 return qh->ep_type == USB_ENDPOINT_XFER_BULK ||
618 qh->ep_type == USB_ENDPOINT_XFER_CONTROL;
619 }
620
dbg_urb(struct urb * urb)621 static inline bool dbg_urb(struct urb *urb)
622 {
623 return usb_pipetype(urb->pipe) == PIPE_BULK ||
624 usb_pipetype(urb->pipe) == PIPE_CONTROL;
625 }
626
dbg_perio(void)627 static inline bool dbg_perio(void) { return false; }
628 #endif
629
630 /*
631 * Returns true if frame1 index is greater than frame2 index. The comparison
632 * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
633 * frame number when the max index frame number is reached.
634 */
dwc2_frame_idx_num_gt(u16 fr_idx1,u16 fr_idx2)635 static inline bool dwc2_frame_idx_num_gt(u16 fr_idx1, u16 fr_idx2)
636 {
637 u16 diff = fr_idx1 - fr_idx2;
638 u16 sign = diff & (FRLISTEN_64_SIZE >> 1);
639
640 return diff && !sign;
641 }
642
643 /*
644 * Returns true if frame1 is less than or equal to frame2. The comparison is
645 * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
646 * frame number when the max frame number is reached.
647 */
dwc2_frame_num_le(u16 frame1,u16 frame2)648 static inline int dwc2_frame_num_le(u16 frame1, u16 frame2)
649 {
650 return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1);
651 }
652
653 /*
654 * Returns true if frame1 is greater than frame2. The comparison is done
655 * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
656 * number when the max frame number is reached.
657 */
dwc2_frame_num_gt(u16 frame1,u16 frame2)658 static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2)
659 {
660 return (frame1 != frame2) &&
661 ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1);
662 }
663
664 /*
665 * Increments frame by the amount specified by inc. The addition is done
666 * modulo HFNUM_MAX_FRNUM. Returns the incremented value.
667 */
dwc2_frame_num_inc(u16 frame,u16 inc)668 static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc)
669 {
670 return (frame + inc) & HFNUM_MAX_FRNUM;
671 }
672
dwc2_frame_num_dec(u16 frame,u16 dec)673 static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec)
674 {
675 return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM;
676 }
677
dwc2_full_frame_num(u16 frame)678 static inline u16 dwc2_full_frame_num(u16 frame)
679 {
680 return (frame & HFNUM_MAX_FRNUM) >> 3;
681 }
682
dwc2_micro_frame_num(u16 frame)683 static inline u16 dwc2_micro_frame_num(u16 frame)
684 {
685 return frame & 0x7;
686 }
687
688 /*
689 * Returns the Core Interrupt Status register contents, ANDed with the Core
690 * Interrupt Mask register contents
691 */
dwc2_read_core_intr(struct dwc2_hsotg * hsotg)692 static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
693 {
694 return dwc2_readl(hsotg, GINTSTS) &
695 dwc2_readl(hsotg, GINTMSK);
696 }
697
dwc2_hcd_urb_get_status(struct dwc2_hcd_urb * dwc2_urb)698 static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
699 {
700 return dwc2_urb->status;
701 }
702
dwc2_hcd_urb_get_actual_length(struct dwc2_hcd_urb * dwc2_urb)703 static inline u32 dwc2_hcd_urb_get_actual_length(
704 struct dwc2_hcd_urb *dwc2_urb)
705 {
706 return dwc2_urb->actual_length;
707 }
708
dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb * dwc2_urb)709 static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb)
710 {
711 return dwc2_urb->error_count;
712 }
713
dwc2_hcd_urb_set_iso_desc_params(struct dwc2_hcd_urb * dwc2_urb,int desc_num,u32 offset,u32 length)714 static inline void dwc2_hcd_urb_set_iso_desc_params(
715 struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset,
716 u32 length)
717 {
718 dwc2_urb->iso_descs[desc_num].offset = offset;
719 dwc2_urb->iso_descs[desc_num].length = length;
720 }
721
dwc2_hcd_urb_get_iso_desc_status(struct dwc2_hcd_urb * dwc2_urb,int desc_num)722 static inline u32 dwc2_hcd_urb_get_iso_desc_status(
723 struct dwc2_hcd_urb *dwc2_urb, int desc_num)
724 {
725 return dwc2_urb->iso_descs[desc_num].status;
726 }
727
dwc2_hcd_urb_get_iso_desc_actual_length(struct dwc2_hcd_urb * dwc2_urb,int desc_num)728 static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length(
729 struct dwc2_hcd_urb *dwc2_urb, int desc_num)
730 {
731 return dwc2_urb->iso_descs[desc_num].actual_length;
732 }
733
dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg * hsotg,struct usb_host_endpoint * ep)734 static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg,
735 struct usb_host_endpoint *ep)
736 {
737 struct dwc2_qh *qh = ep->hcpriv;
738
739 if (qh && !list_empty(&qh->qh_list_entry))
740 return 1;
741
742 return 0;
743 }
744
dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg * hsotg,struct usb_host_endpoint * ep)745 static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg,
746 struct usb_host_endpoint *ep)
747 {
748 struct dwc2_qh *qh = ep->hcpriv;
749
750 if (!qh) {
751 WARN_ON(1);
752 return 0;
753 }
754
755 return qh->host_us;
756 }
757
758 void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
759 struct dwc2_host_chan *chan, int chnum,
760 struct dwc2_qtd *qtd);
761
762 /* HCD Core API */
763
764 /**
765 * dwc2_handle_hcd_intr() - Called on every hardware interrupt
766 *
767 * @hsotg: The DWC2 HCD
768 *
769 * Returns IRQ_HANDLED if interrupt is handled
770 * Return IRQ_NONE if interrupt is not handled
771 */
772 irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg);
773
774 /**
775 * dwc2_hcd_stop() - Halts the DWC_otg host mode operation
776 *
777 * @hsotg: The DWC2 HCD
778 */
779 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg);
780
781 /**
782 * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host,
783 * and 0 otherwise
784 *
785 * @hsotg: The DWC2 HCD
786 */
787 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg);
788
789 /**
790 * dwc2_hcd_dump_state() - Dumps hsotg state
791 *
792 * @hsotg: The DWC2 HCD
793 *
794 * NOTE: This function will be removed once the peripheral controller code
795 * is integrated and the driver is stable
796 */
797 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg);
798
799 /* URB interface */
800
801 /* Transfer flags */
802 #define URB_GIVEBACK_ASAP 0x1
803 #define URB_SEND_ZERO_PACKET 0x2
804
805 /* Host driver callbacks */
806 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg,
807 void *context, gfp_t mem_flags,
808 int *ttport);
809
810 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg,
811 struct dwc2_tt *dwc_tt);
812 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
813 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
814 int status);
815
816 #endif /* __DWC2_HCD_H__ */
817