1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (C) 2005-2007 by Texas Instruments
4 * Some code has been taken from tusb6010.c
5 * Copyrights for that are attributable to:
6 * Copyright (C) 2006 Nokia Corporation
7 * Tony Lindgren <tony@atomide.com>
8 *
9 * This file is part of the Inventra Controller Driver for Linux.
10 */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/sched.h>
14 #include <linux/init.h>
15 #include <linux/list.h>
16 #include <linux/io.h>
17 #include <linux/of.h>
18 #include <linux/platform_device.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/err.h>
22 #include <linux/delay.h>
23 #include <linux/usb/musb.h>
24 #include <linux/phy/omap_control_phy.h>
25 #include <linux/of_platform.h>
26
27 #include "musb_core.h"
28 #include "omap2430.h"
29
30 struct omap2430_glue {
31 struct device *dev;
32 struct platform_device *musb;
33 enum musb_vbus_id_status status;
34 struct work_struct omap_musb_mailbox_work;
35 struct device *control_otghs;
36 unsigned int is_runtime_suspended:1;
37 unsigned int needs_resume:1;
38 unsigned int phy_suspended:1;
39 };
40 #define glue_to_musb(g) platform_get_drvdata(g->musb)
41
42 static struct omap2430_glue *_glue;
43
omap2430_low_level_exit(struct musb * musb)44 static inline void omap2430_low_level_exit(struct musb *musb)
45 {
46 u32 l;
47
48 /* in any role */
49 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
50 l |= ENABLEFORCE; /* enable MSTANDBY */
51 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
52 }
53
omap2430_low_level_init(struct musb * musb)54 static inline void omap2430_low_level_init(struct musb *musb)
55 {
56 u32 l;
57
58 l = musb_readl(musb->mregs, OTG_FORCESTDBY);
59 l &= ~ENABLEFORCE; /* disable MSTANDBY */
60 musb_writel(musb->mregs, OTG_FORCESTDBY, l);
61 }
62
omap2430_musb_mailbox(enum musb_vbus_id_status status)63 static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
64 {
65 struct omap2430_glue *glue = _glue;
66
67 if (!glue) {
68 pr_err("%s: musb core is not yet initialized\n", __func__);
69 return -EPROBE_DEFER;
70 }
71 glue->status = status;
72
73 if (!glue_to_musb(glue)) {
74 pr_err("%s: musb core is not yet ready\n", __func__);
75 return -EPROBE_DEFER;
76 }
77
78 schedule_work(&glue->omap_musb_mailbox_work);
79
80 return 0;
81 }
82
83 /*
84 * HDRC controls CPEN, but beware current surges during device connect.
85 * They can trigger transient overcurrent conditions that must be ignored.
86 *
87 * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
88 * as set by musb_set_peripheral().
89 */
omap_musb_set_mailbox(struct omap2430_glue * glue)90 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
91 {
92 struct musb *musb = glue_to_musb(glue);
93 int error;
94
95 pm_runtime_get_sync(musb->controller);
96
97 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
98 usb_otg_state_string(musb->xceiv->otg->state),
99 musb_readb(musb->mregs, MUSB_DEVCTL));
100
101 switch (glue->status) {
102 case MUSB_ID_GROUND:
103 dev_dbg(musb->controller, "ID GND\n");
104 switch (musb->xceiv->otg->state) {
105 case OTG_STATE_A_IDLE:
106 error = musb_set_host(musb);
107 if (error)
108 break;
109 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
110 fallthrough;
111 case OTG_STATE_A_WAIT_VRISE:
112 case OTG_STATE_A_WAIT_BCON:
113 case OTG_STATE_A_HOST:
114 /*
115 * On multiple ID ground interrupts just keep enabling
116 * VBUS. At least cpcap VBUS shuts down otherwise.
117 */
118 otg_set_vbus(musb->xceiv->otg, 1);
119 break;
120 default:
121 musb->xceiv->otg->state = OTG_STATE_A_IDLE;
122 musb->xceiv->last_event = USB_EVENT_ID;
123 if (musb->gadget_driver) {
124 omap_control_usb_set_mode(glue->control_otghs,
125 USB_MODE_HOST);
126 otg_set_vbus(musb->xceiv->otg, 1);
127 }
128 break;
129 }
130 break;
131
132 case MUSB_VBUS_VALID:
133 dev_dbg(musb->controller, "VBUS Connect\n");
134
135 musb->xceiv->otg->state = OTG_STATE_B_IDLE;
136 musb->xceiv->last_event = USB_EVENT_VBUS;
137 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
138 break;
139
140 case MUSB_ID_FLOAT:
141 case MUSB_VBUS_OFF:
142 dev_dbg(musb->controller, "VBUS Disconnect\n");
143
144 musb->xceiv->last_event = USB_EVENT_NONE;
145 musb_set_peripheral(musb);
146 otg_set_vbus(musb->xceiv->otg, 0);
147 omap_control_usb_set_mode(glue->control_otghs,
148 USB_MODE_DISCONNECT);
149 break;
150 default:
151 dev_dbg(musb->controller, "ID float\n");
152 }
153 pm_runtime_mark_last_busy(musb->controller);
154 pm_runtime_put_autosuspend(musb->controller);
155 atomic_notifier_call_chain(&musb->xceiv->notifier,
156 musb->xceiv->last_event, NULL);
157 }
158
159
omap_musb_mailbox_work(struct work_struct * mailbox_work)160 static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
161 {
162 struct omap2430_glue *glue = container_of(mailbox_work,
163 struct omap2430_glue, omap_musb_mailbox_work);
164
165 omap_musb_set_mailbox(glue);
166 }
167
omap2430_musb_interrupt(int irq,void * __hci)168 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
169 {
170 unsigned long flags;
171 irqreturn_t retval = IRQ_NONE;
172 struct musb *musb = __hci;
173
174 spin_lock_irqsave(&musb->lock, flags);
175
176 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
177 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
178 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
179
180 if (musb->int_usb || musb->int_tx || musb->int_rx)
181 retval = musb_interrupt(musb);
182
183 spin_unlock_irqrestore(&musb->lock, flags);
184
185 return retval;
186 }
187
omap2430_musb_init(struct musb * musb)188 static int omap2430_musb_init(struct musb *musb)
189 {
190 u32 l;
191 int status = 0;
192 struct device *dev = musb->controller;
193 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
194 struct omap_musb_board_data *data = plat->board_data;
195
196 /* We require some kind of external transceiver, hooked
197 * up through ULPI. TWL4030-family PMICs include one,
198 * which needs a driver, drivers aren't always needed.
199 */
200 musb->phy = devm_phy_get(dev->parent, "usb2-phy");
201
202 /* We can't totally remove musb->xceiv as of now because
203 * musb core uses xceiv.state and xceiv.otg. Once we have
204 * a separate state machine to handle otg, these can be moved
205 * out of xceiv and then we can start using the generic PHY
206 * framework
207 */
208 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
209
210 if (IS_ERR(musb->xceiv)) {
211 status = PTR_ERR(musb->xceiv);
212
213 if (status == -ENXIO)
214 return status;
215
216 dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
217 return -EPROBE_DEFER;
218 }
219
220 if (IS_ERR(musb->phy)) {
221 dev_err(dev, "HS USB OTG: no PHY configured\n");
222 return PTR_ERR(musb->phy);
223 }
224 musb->isr = omap2430_musb_interrupt;
225 phy_init(musb->phy);
226 phy_power_on(musb->phy);
227
228 l = musb_readl(musb->mregs, OTG_INTERFSEL);
229
230 if (data->interface_type == MUSB_INTERFACE_UTMI) {
231 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
232 l &= ~ULPI_12PIN; /* Disable ULPI */
233 l |= UTMI_8BIT; /* Enable UTMI */
234 } else {
235 l |= ULPI_12PIN;
236 }
237
238 musb_writel(musb->mregs, OTG_INTERFSEL, l);
239
240 dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
241 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n",
242 musb_readl(musb->mregs, OTG_REVISION),
243 musb_readl(musb->mregs, OTG_SYSCONFIG),
244 musb_readl(musb->mregs, OTG_SYSSTATUS),
245 musb_readl(musb->mregs, OTG_INTERFSEL),
246 musb_readl(musb->mregs, OTG_SIMENABLE));
247
248 return 0;
249 }
250
omap2430_musb_enable(struct musb * musb)251 static void omap2430_musb_enable(struct musb *musb)
252 {
253 struct device *dev = musb->controller;
254 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
255
256 if (glue->status == MUSB_UNKNOWN)
257 glue->status = MUSB_VBUS_OFF;
258 omap_musb_set_mailbox(glue);
259 }
260
omap2430_musb_disable(struct musb * musb)261 static void omap2430_musb_disable(struct musb *musb)
262 {
263 struct device *dev = musb->controller;
264 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
265
266 if (glue->status != MUSB_UNKNOWN)
267 omap_control_usb_set_mode(glue->control_otghs,
268 USB_MODE_DISCONNECT);
269 }
270
omap2430_musb_exit(struct musb * musb)271 static int omap2430_musb_exit(struct musb *musb)
272 {
273 struct device *dev = musb->controller;
274 struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
275
276 omap2430_low_level_exit(musb);
277 phy_power_off(musb->phy);
278 phy_exit(musb->phy);
279 musb->phy = NULL;
280 cancel_work_sync(&glue->omap_musb_mailbox_work);
281
282 return 0;
283 }
284
285 static const struct musb_platform_ops omap2430_ops = {
286 .quirks = MUSB_DMA_INVENTRA,
287 #ifdef CONFIG_USB_INVENTRA_DMA
288 .dma_init = musbhs_dma_controller_create,
289 .dma_exit = musbhs_dma_controller_destroy,
290 #endif
291 .init = omap2430_musb_init,
292 .exit = omap2430_musb_exit,
293
294 .enable = omap2430_musb_enable,
295 .disable = omap2430_musb_disable,
296
297 .phy_callback = omap2430_musb_mailbox,
298 };
299
300 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
301
omap2430_probe(struct platform_device * pdev)302 static int omap2430_probe(struct platform_device *pdev)
303 {
304 struct resource musb_resources[3];
305 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
306 struct omap_musb_board_data *data;
307 struct platform_device *musb;
308 struct omap2430_glue *glue;
309 struct device_node *np = pdev->dev.of_node;
310 struct musb_hdrc_config *config;
311 struct device_node *control_node;
312 struct platform_device *control_pdev;
313 int ret = -ENOMEM, val;
314
315 if (!np)
316 return -ENODEV;
317
318 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
319 if (!glue)
320 goto err0;
321
322 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
323 if (!musb) {
324 dev_err(&pdev->dev, "failed to allocate musb device\n");
325 goto err0;
326 }
327
328 musb->dev.parent = &pdev->dev;
329 musb->dev.dma_mask = &omap2430_dmamask;
330 musb->dev.coherent_dma_mask = omap2430_dmamask;
331
332 glue->dev = &pdev->dev;
333 glue->musb = musb;
334 glue->status = MUSB_UNKNOWN;
335 glue->control_otghs = ERR_PTR(-ENODEV);
336
337 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
338 if (!pdata)
339 goto err2;
340
341 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
342 if (!data)
343 goto err2;
344
345 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
346 if (!config)
347 goto err2;
348
349 of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
350 of_property_read_u32(np, "interface-type",
351 (u32 *)&data->interface_type);
352 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
353 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
354 of_property_read_u32(np, "power", (u32 *)&pdata->power);
355
356 ret = of_property_read_u32(np, "multipoint", &val);
357 if (!ret && val)
358 config->multipoint = true;
359
360 pdata->board_data = data;
361 pdata->config = config;
362
363 control_node = of_parse_phandle(np, "ctrl-module", 0);
364 if (control_node) {
365 control_pdev = of_find_device_by_node(control_node);
366 of_node_put(control_node);
367 if (!control_pdev) {
368 dev_err(&pdev->dev, "Failed to get control device\n");
369 ret = -EINVAL;
370 goto err2;
371 }
372 glue->control_otghs = &control_pdev->dev;
373 }
374
375 pdata->platform_ops = &omap2430_ops;
376
377 platform_set_drvdata(pdev, glue);
378
379 /*
380 * REVISIT if we ever have two instances of the wrapper, we will be
381 * in big trouble
382 */
383 _glue = glue;
384
385 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
386
387 memset(musb_resources, 0x00, sizeof(*musb_resources) *
388 ARRAY_SIZE(musb_resources));
389
390 musb_resources[0].name = pdev->resource[0].name;
391 musb_resources[0].start = pdev->resource[0].start;
392 musb_resources[0].end = pdev->resource[0].end;
393 musb_resources[0].flags = pdev->resource[0].flags;
394
395 musb_resources[1].name = pdev->resource[1].name;
396 musb_resources[1].start = pdev->resource[1].start;
397 musb_resources[1].end = pdev->resource[1].end;
398 musb_resources[1].flags = pdev->resource[1].flags;
399
400 musb_resources[2].name = pdev->resource[2].name;
401 musb_resources[2].start = pdev->resource[2].start;
402 musb_resources[2].end = pdev->resource[2].end;
403 musb_resources[2].flags = pdev->resource[2].flags;
404
405 ret = platform_device_add_resources(musb, musb_resources,
406 ARRAY_SIZE(musb_resources));
407 if (ret) {
408 dev_err(&pdev->dev, "failed to add resources\n");
409 goto err2;
410 }
411
412 ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
413 if (ret) {
414 dev_err(&pdev->dev, "failed to add platform_data\n");
415 goto err2;
416 }
417
418 pm_runtime_enable(glue->dev);
419
420 ret = platform_device_add(musb);
421 if (ret) {
422 dev_err(&pdev->dev, "failed to register musb device\n");
423 goto err3;
424 }
425
426 return 0;
427
428 err3:
429 pm_runtime_disable(glue->dev);
430
431 err2:
432 platform_device_put(musb);
433
434 err0:
435 return ret;
436 }
437
omap2430_remove(struct platform_device * pdev)438 static int omap2430_remove(struct platform_device *pdev)
439 {
440 struct omap2430_glue *glue = platform_get_drvdata(pdev);
441
442 platform_device_unregister(glue->musb);
443 pm_runtime_disable(glue->dev);
444
445 return 0;
446 }
447
448 #ifdef CONFIG_PM
449
omap2430_runtime_suspend(struct device * dev)450 static int omap2430_runtime_suspend(struct device *dev)
451 {
452 struct omap2430_glue *glue = dev_get_drvdata(dev);
453 struct musb *musb = glue_to_musb(glue);
454
455 if (!musb)
456 return 0;
457
458 musb->context.otg_interfsel = musb_readl(musb->mregs,
459 OTG_INTERFSEL);
460
461 omap2430_low_level_exit(musb);
462
463 if (!glue->phy_suspended) {
464 phy_power_off(musb->phy);
465 phy_exit(musb->phy);
466 }
467
468 glue->is_runtime_suspended = 1;
469
470 return 0;
471 }
472
omap2430_runtime_resume(struct device * dev)473 static int omap2430_runtime_resume(struct device *dev)
474 {
475 struct omap2430_glue *glue = dev_get_drvdata(dev);
476 struct musb *musb = glue_to_musb(glue);
477
478 if (!musb)
479 return 0;
480
481 if (!glue->phy_suspended) {
482 phy_init(musb->phy);
483 phy_power_on(musb->phy);
484 }
485
486 omap2430_low_level_init(musb);
487 musb_writel(musb->mregs, OTG_INTERFSEL,
488 musb->context.otg_interfsel);
489
490 /* Wait for musb to get oriented. Otherwise we can get babble */
491 usleep_range(200000, 250000);
492
493 glue->is_runtime_suspended = 0;
494
495 return 0;
496 }
497
498 /* I2C and SPI PHYs need to be suspended before the glue layer */
omap2430_suspend(struct device * dev)499 static int omap2430_suspend(struct device *dev)
500 {
501 struct omap2430_glue *glue = dev_get_drvdata(dev);
502 struct musb *musb = glue_to_musb(glue);
503
504 phy_power_off(musb->phy);
505 phy_exit(musb->phy);
506 glue->phy_suspended = 1;
507
508 return 0;
509 }
510
511 /* Glue layer needs to be suspended after musb_suspend() */
omap2430_suspend_late(struct device * dev)512 static int omap2430_suspend_late(struct device *dev)
513 {
514 struct omap2430_glue *glue = dev_get_drvdata(dev);
515
516 if (glue->is_runtime_suspended)
517 return 0;
518
519 glue->needs_resume = 1;
520
521 return omap2430_runtime_suspend(dev);
522 }
523
omap2430_resume_early(struct device * dev)524 static int omap2430_resume_early(struct device *dev)
525 {
526 struct omap2430_glue *glue = dev_get_drvdata(dev);
527
528 if (!glue->needs_resume)
529 return 0;
530
531 glue->needs_resume = 0;
532
533 return omap2430_runtime_resume(dev);
534 }
535
omap2430_resume(struct device * dev)536 static int omap2430_resume(struct device *dev)
537 {
538 struct omap2430_glue *glue = dev_get_drvdata(dev);
539 struct musb *musb = glue_to_musb(glue);
540
541 phy_init(musb->phy);
542 phy_power_on(musb->phy);
543 glue->phy_suspended = 0;
544
545 return 0;
546 }
547
548 static const struct dev_pm_ops omap2430_pm_ops = {
549 .runtime_suspend = omap2430_runtime_suspend,
550 .runtime_resume = omap2430_runtime_resume,
551 .suspend = omap2430_suspend,
552 .suspend_late = omap2430_suspend_late,
553 .resume_early = omap2430_resume_early,
554 .resume = omap2430_resume,
555 };
556
557 #define DEV_PM_OPS (&omap2430_pm_ops)
558 #else
559 #define DEV_PM_OPS NULL
560 #endif
561
562 #ifdef CONFIG_OF
563 static const struct of_device_id omap2430_id_table[] = {
564 {
565 .compatible = "ti,omap4-musb"
566 },
567 {
568 .compatible = "ti,omap3-musb"
569 },
570 {},
571 };
572 MODULE_DEVICE_TABLE(of, omap2430_id_table);
573 #endif
574
575 static struct platform_driver omap2430_driver = {
576 .probe = omap2430_probe,
577 .remove = omap2430_remove,
578 .driver = {
579 .name = "musb-omap2430",
580 .pm = DEV_PM_OPS,
581 .of_match_table = of_match_ptr(omap2430_id_table),
582 },
583 };
584
585 module_platform_driver(omap2430_driver);
586
587 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
588 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
589 MODULE_LICENSE("GPL v2");
590