1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2005-2006 Micronas USA Inc.
4 */
5
6 #include <linux/module.h>
7 #include <linux/init.h>
8 #include <linux/i2c.h>
9 #include <linux/videodev2.h>
10 #include <linux/ioctl.h>
11 #include <linux/slab.h>
12 #include <media/v4l2-subdev.h>
13 #include <media/v4l2-device.h>
14 #include <media/v4l2-ctrls.h>
15
16 #define TW2804_REG_AUTOGAIN 0x02
17 #define TW2804_REG_HUE 0x0f
18 #define TW2804_REG_SATURATION 0x10
19 #define TW2804_REG_CONTRAST 0x11
20 #define TW2804_REG_BRIGHTNESS 0x12
21 #define TW2804_REG_COLOR_KILLER 0x14
22 #define TW2804_REG_GAIN 0x3c
23 #define TW2804_REG_CHROMA_GAIN 0x3d
24 #define TW2804_REG_BLUE_BALANCE 0x3e
25 #define TW2804_REG_RED_BALANCE 0x3f
26
27 struct tw2804 {
28 struct v4l2_subdev sd;
29 struct v4l2_ctrl_handler hdl;
30 u8 channel:2;
31 u8 input:1;
32 int norm;
33 };
34
35 static const u8 global_registers[] = {
36 0x39, 0x00,
37 0x3a, 0xff,
38 0x3b, 0x84,
39 0x3c, 0x80,
40 0x3d, 0x80,
41 0x3e, 0x82,
42 0x3f, 0x82,
43 0x78, 0x00,
44 0xff, 0xff, /* Terminator (reg 0xff does not exist) */
45 };
46
47 static const u8 channel_registers[] = {
48 0x01, 0xc4,
49 0x02, 0xa5,
50 0x03, 0x20,
51 0x04, 0xd0,
52 0x05, 0x20,
53 0x06, 0xd0,
54 0x07, 0x88,
55 0x08, 0x20,
56 0x09, 0x07,
57 0x0a, 0xf0,
58 0x0b, 0x07,
59 0x0c, 0xf0,
60 0x0d, 0x40,
61 0x0e, 0xd2,
62 0x0f, 0x80,
63 0x10, 0x80,
64 0x11, 0x80,
65 0x12, 0x80,
66 0x13, 0x1f,
67 0x14, 0x00,
68 0x15, 0x00,
69 0x16, 0x00,
70 0x17, 0x00,
71 0x18, 0xff,
72 0x19, 0xff,
73 0x1a, 0xff,
74 0x1b, 0xff,
75 0x1c, 0xff,
76 0x1d, 0xff,
77 0x1e, 0xff,
78 0x1f, 0xff,
79 0x20, 0x07,
80 0x21, 0x07,
81 0x22, 0x00,
82 0x23, 0x91,
83 0x24, 0x51,
84 0x25, 0x03,
85 0x26, 0x00,
86 0x27, 0x00,
87 0x28, 0x00,
88 0x29, 0x00,
89 0x2a, 0x00,
90 0x2b, 0x00,
91 0x2c, 0x00,
92 0x2d, 0x00,
93 0x2e, 0x00,
94 0x2f, 0x00,
95 0x30, 0x00,
96 0x31, 0x00,
97 0x32, 0x00,
98 0x33, 0x00,
99 0x34, 0x00,
100 0x35, 0x00,
101 0x36, 0x00,
102 0x37, 0x00,
103 0xff, 0xff, /* Terminator (reg 0xff does not exist) */
104 };
105
write_reg(struct i2c_client * client,u8 reg,u8 value,u8 channel)106 static int write_reg(struct i2c_client *client, u8 reg, u8 value, u8 channel)
107 {
108 return i2c_smbus_write_byte_data(client, reg | (channel << 6), value);
109 }
110
write_regs(struct i2c_client * client,const u8 * regs,u8 channel)111 static int write_regs(struct i2c_client *client, const u8 *regs, u8 channel)
112 {
113 int ret;
114 int i;
115
116 for (i = 0; regs[i] != 0xff; i += 2) {
117 ret = i2c_smbus_write_byte_data(client,
118 regs[i] | (channel << 6), regs[i + 1]);
119 if (ret < 0)
120 return ret;
121 }
122 return 0;
123 }
124
read_reg(struct i2c_client * client,u8 reg,u8 channel)125 static int read_reg(struct i2c_client *client, u8 reg, u8 channel)
126 {
127 return i2c_smbus_read_byte_data(client, (reg) | (channel << 6));
128 }
129
to_state(struct v4l2_subdev * sd)130 static inline struct tw2804 *to_state(struct v4l2_subdev *sd)
131 {
132 return container_of(sd, struct tw2804, sd);
133 }
134
to_state_from_ctrl(struct v4l2_ctrl * ctrl)135 static inline struct tw2804 *to_state_from_ctrl(struct v4l2_ctrl *ctrl)
136 {
137 return container_of(ctrl->handler, struct tw2804, hdl);
138 }
139
tw2804_log_status(struct v4l2_subdev * sd)140 static int tw2804_log_status(struct v4l2_subdev *sd)
141 {
142 struct tw2804 *state = to_state(sd);
143
144 v4l2_info(sd, "Standard: %s\n",
145 state->norm & V4L2_STD_525_60 ? "60 Hz" : "50 Hz");
146 v4l2_info(sd, "Channel: %d\n", state->channel);
147 v4l2_info(sd, "Input: %d\n", state->input);
148 return v4l2_ctrl_subdev_log_status(sd);
149 }
150
151 /*
152 * These volatile controls are needed because all four channels share
153 * these controls. So a change made to them through one channel would
154 * require another channel to be updated.
155 *
156 * Normally this would have been done in a different way, but since the one
157 * board that uses this driver sees this single chip as if it was on four
158 * different i2c adapters (each adapter belonging to a separate instance of
159 * the same USB driver) there is no reliable method that I have found to let
160 * the instances know about each other.
161 *
162 * So implementing these global registers as volatile is the best we can do.
163 */
tw2804_g_volatile_ctrl(struct v4l2_ctrl * ctrl)164 static int tw2804_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
165 {
166 struct tw2804 *state = to_state_from_ctrl(ctrl);
167 struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
168
169 switch (ctrl->id) {
170 case V4L2_CID_GAIN:
171 ctrl->val = read_reg(client, TW2804_REG_GAIN, 0);
172 return 0;
173
174 case V4L2_CID_CHROMA_GAIN:
175 ctrl->val = read_reg(client, TW2804_REG_CHROMA_GAIN, 0);
176 return 0;
177
178 case V4L2_CID_BLUE_BALANCE:
179 ctrl->val = read_reg(client, TW2804_REG_BLUE_BALANCE, 0);
180 return 0;
181
182 case V4L2_CID_RED_BALANCE:
183 ctrl->val = read_reg(client, TW2804_REG_RED_BALANCE, 0);
184 return 0;
185 }
186 return 0;
187 }
188
tw2804_s_ctrl(struct v4l2_ctrl * ctrl)189 static int tw2804_s_ctrl(struct v4l2_ctrl *ctrl)
190 {
191 struct tw2804 *state = to_state_from_ctrl(ctrl);
192 struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
193 int addr;
194 int reg;
195
196 switch (ctrl->id) {
197 case V4L2_CID_AUTOGAIN:
198 addr = TW2804_REG_AUTOGAIN;
199 reg = read_reg(client, addr, state->channel);
200 if (reg < 0)
201 return reg;
202 if (ctrl->val == 0)
203 reg &= ~(1 << 7);
204 else
205 reg |= 1 << 7;
206 return write_reg(client, addr, reg, state->channel);
207
208 case V4L2_CID_COLOR_KILLER:
209 addr = TW2804_REG_COLOR_KILLER;
210 reg = read_reg(client, addr, state->channel);
211 if (reg < 0)
212 return reg;
213 reg = (reg & ~(0x03)) | (ctrl->val == 0 ? 0x02 : 0x03);
214 return write_reg(client, addr, reg, state->channel);
215
216 case V4L2_CID_GAIN:
217 return write_reg(client, TW2804_REG_GAIN, ctrl->val, 0);
218
219 case V4L2_CID_CHROMA_GAIN:
220 return write_reg(client, TW2804_REG_CHROMA_GAIN, ctrl->val, 0);
221
222 case V4L2_CID_BLUE_BALANCE:
223 return write_reg(client, TW2804_REG_BLUE_BALANCE, ctrl->val, 0);
224
225 case V4L2_CID_RED_BALANCE:
226 return write_reg(client, TW2804_REG_RED_BALANCE, ctrl->val, 0);
227
228 case V4L2_CID_BRIGHTNESS:
229 return write_reg(client, TW2804_REG_BRIGHTNESS,
230 ctrl->val, state->channel);
231
232 case V4L2_CID_CONTRAST:
233 return write_reg(client, TW2804_REG_CONTRAST,
234 ctrl->val, state->channel);
235
236 case V4L2_CID_SATURATION:
237 return write_reg(client, TW2804_REG_SATURATION,
238 ctrl->val, state->channel);
239
240 case V4L2_CID_HUE:
241 return write_reg(client, TW2804_REG_HUE,
242 ctrl->val, state->channel);
243
244 default:
245 break;
246 }
247 return -EINVAL;
248 }
249
tw2804_s_std(struct v4l2_subdev * sd,v4l2_std_id norm)250 static int tw2804_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
251 {
252 struct tw2804 *dec = to_state(sd);
253 struct i2c_client *client = v4l2_get_subdevdata(sd);
254 bool is_60hz = norm & V4L2_STD_525_60;
255 u8 regs[] = {
256 0x01, is_60hz ? 0xc4 : 0x84,
257 0x09, is_60hz ? 0x07 : 0x04,
258 0x0a, is_60hz ? 0xf0 : 0x20,
259 0x0b, is_60hz ? 0x07 : 0x04,
260 0x0c, is_60hz ? 0xf0 : 0x20,
261 0x0d, is_60hz ? 0x40 : 0x4a,
262 0x16, is_60hz ? 0x00 : 0x40,
263 0x17, is_60hz ? 0x00 : 0x40,
264 0x20, is_60hz ? 0x07 : 0x0f,
265 0x21, is_60hz ? 0x07 : 0x0f,
266 0xff, 0xff,
267 };
268
269 write_regs(client, regs, dec->channel);
270 dec->norm = norm;
271 return 0;
272 }
273
tw2804_s_video_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)274 static int tw2804_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output,
275 u32 config)
276 {
277 struct tw2804 *dec = to_state(sd);
278 struct i2c_client *client = v4l2_get_subdevdata(sd);
279 int reg;
280
281 if (config && config - 1 != dec->channel) {
282 if (config > 4) {
283 dev_err(&client->dev,
284 "channel %d is not between 1 and 4!\n", config);
285 return -EINVAL;
286 }
287 dec->channel = config - 1;
288 dev_dbg(&client->dev, "initializing TW2804 channel %d\n",
289 dec->channel);
290 if (dec->channel == 0 &&
291 write_regs(client, global_registers, 0) < 0) {
292 dev_err(&client->dev,
293 "error initializing TW2804 global registers\n");
294 return -EIO;
295 }
296 if (write_regs(client, channel_registers, dec->channel) < 0) {
297 dev_err(&client->dev,
298 "error initializing TW2804 channel %d\n",
299 dec->channel);
300 return -EIO;
301 }
302 }
303
304 if (input > 1)
305 return -EINVAL;
306
307 if (input == dec->input)
308 return 0;
309
310 reg = read_reg(client, 0x22, dec->channel);
311
312 if (reg >= 0) {
313 if (input == 0)
314 reg &= ~(1 << 2);
315 else
316 reg |= 1 << 2;
317 reg = write_reg(client, 0x22, reg, dec->channel);
318 }
319
320 if (reg >= 0)
321 dec->input = input;
322 else
323 return reg;
324 return 0;
325 }
326
327 static const struct v4l2_ctrl_ops tw2804_ctrl_ops = {
328 .g_volatile_ctrl = tw2804_g_volatile_ctrl,
329 .s_ctrl = tw2804_s_ctrl,
330 };
331
332 static const struct v4l2_subdev_video_ops tw2804_video_ops = {
333 .s_std = tw2804_s_std,
334 .s_routing = tw2804_s_video_routing,
335 };
336
337 static const struct v4l2_subdev_core_ops tw2804_core_ops = {
338 .log_status = tw2804_log_status,
339 };
340
341 static const struct v4l2_subdev_ops tw2804_ops = {
342 .core = &tw2804_core_ops,
343 .video = &tw2804_video_ops,
344 };
345
tw2804_probe(struct i2c_client * client,const struct i2c_device_id * id)346 static int tw2804_probe(struct i2c_client *client,
347 const struct i2c_device_id *id)
348 {
349 struct i2c_adapter *adapter = client->adapter;
350 struct tw2804 *state;
351 struct v4l2_subdev *sd;
352 struct v4l2_ctrl *ctrl;
353 int err;
354
355 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
356 return -ENODEV;
357
358 state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
359 if (state == NULL)
360 return -ENOMEM;
361 sd = &state->sd;
362 v4l2_i2c_subdev_init(sd, client, &tw2804_ops);
363 state->channel = -1;
364 state->norm = V4L2_STD_NTSC;
365
366 v4l2_ctrl_handler_init(&state->hdl, 10);
367 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
368 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
369 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
370 V4L2_CID_CONTRAST, 0, 255, 1, 128);
371 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
372 V4L2_CID_SATURATION, 0, 255, 1, 128);
373 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
374 V4L2_CID_HUE, 0, 255, 1, 128);
375 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
376 V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
377 v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
378 V4L2_CID_AUTOGAIN, 0, 1, 1, 0);
379 ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
380 V4L2_CID_GAIN, 0, 255, 1, 128);
381 if (ctrl)
382 ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
383 ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
384 V4L2_CID_CHROMA_GAIN, 0, 255, 1, 128);
385 if (ctrl)
386 ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
387 ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
388 V4L2_CID_BLUE_BALANCE, 0, 255, 1, 122);
389 if (ctrl)
390 ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
391 ctrl = v4l2_ctrl_new_std(&state->hdl, &tw2804_ctrl_ops,
392 V4L2_CID_RED_BALANCE, 0, 255, 1, 122);
393 if (ctrl)
394 ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
395 sd->ctrl_handler = &state->hdl;
396 err = state->hdl.error;
397 if (err) {
398 v4l2_ctrl_handler_free(&state->hdl);
399 return err;
400 }
401
402 v4l_info(client, "chip found @ 0x%02x (%s)\n",
403 client->addr << 1, client->adapter->name);
404
405 return 0;
406 }
407
tw2804_remove(struct i2c_client * client)408 static void tw2804_remove(struct i2c_client *client)
409 {
410 struct v4l2_subdev *sd = i2c_get_clientdata(client);
411 struct tw2804 *state = to_state(sd);
412
413 v4l2_device_unregister_subdev(sd);
414 v4l2_ctrl_handler_free(&state->hdl);
415 }
416
417 static const struct i2c_device_id tw2804_id[] = {
418 { "tw2804", 0 },
419 { }
420 };
421 MODULE_DEVICE_TABLE(i2c, tw2804_id);
422
423 static struct i2c_driver tw2804_driver = {
424 .driver = {
425 .name = "tw2804",
426 },
427 .probe = tw2804_probe,
428 .remove = tw2804_remove,
429 .id_table = tw2804_id,
430 };
431
432 module_i2c_driver(tw2804_driver);
433
434 MODULE_LICENSE("GPL v2");
435 MODULE_DESCRIPTION("TW2804/TW2802 V4L2 i2c driver");
436 MODULE_AUTHOR("Micronas USA Inc");
437