1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * ST Microelectronics MFD: stmpe's driver
4 *
5 * Copyright (C) ST-Ericsson SA 2010
6 *
7 * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
8 */
9
10 #include <linux/err.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/export.h>
13 #include <linux/kernel.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/irqdomain.h>
17 #include <linux/of.h>
18 #include <linux/pm.h>
19 #include <linux/slab.h>
20 #include <linux/mfd/core.h>
21 #include <linux/delay.h>
22 #include <linux/regulator/consumer.h>
23 #include "stmpe.h"
24
25 /**
26 * struct stmpe_platform_data - STMPE platform data
27 * @id: device id to distinguish between multiple STMPEs on the same board
28 * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
29 * @irq_trigger: IRQ trigger to use for the interrupt to the host
30 * @autosleep: bool to enable/disable stmpe autosleep
31 * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
32 */
33 struct stmpe_platform_data {
34 int id;
35 unsigned int blocks;
36 unsigned int irq_trigger;
37 bool autosleep;
38 int autosleep_timeout;
39 };
40
__stmpe_enable(struct stmpe * stmpe,unsigned int blocks)41 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
42 {
43 return stmpe->variant->enable(stmpe, blocks, true);
44 }
45
__stmpe_disable(struct stmpe * stmpe,unsigned int blocks)46 static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
47 {
48 return stmpe->variant->enable(stmpe, blocks, false);
49 }
50
__stmpe_reg_read(struct stmpe * stmpe,u8 reg)51 static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
52 {
53 int ret;
54
55 ret = stmpe->ci->read_byte(stmpe, reg);
56 if (ret < 0)
57 dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
58
59 dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
60
61 return ret;
62 }
63
__stmpe_reg_write(struct stmpe * stmpe,u8 reg,u8 val)64 static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
65 {
66 int ret;
67
68 dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
69
70 ret = stmpe->ci->write_byte(stmpe, reg, val);
71 if (ret < 0)
72 dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
73
74 return ret;
75 }
76
__stmpe_set_bits(struct stmpe * stmpe,u8 reg,u8 mask,u8 val)77 static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
78 {
79 int ret;
80
81 ret = __stmpe_reg_read(stmpe, reg);
82 if (ret < 0)
83 return ret;
84
85 ret &= ~mask;
86 ret |= val;
87
88 return __stmpe_reg_write(stmpe, reg, ret);
89 }
90
__stmpe_block_read(struct stmpe * stmpe,u8 reg,u8 length,u8 * values)91 static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
92 u8 *values)
93 {
94 int ret;
95
96 ret = stmpe->ci->read_block(stmpe, reg, length, values);
97 if (ret < 0)
98 dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
99
100 dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
101 stmpe_dump_bytes("stmpe rd: ", values, length);
102
103 return ret;
104 }
105
__stmpe_block_write(struct stmpe * stmpe,u8 reg,u8 length,const u8 * values)106 static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
107 const u8 *values)
108 {
109 int ret;
110
111 dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
112 stmpe_dump_bytes("stmpe wr: ", values, length);
113
114 ret = stmpe->ci->write_block(stmpe, reg, length, values);
115 if (ret < 0)
116 dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
117
118 return ret;
119 }
120
121 /**
122 * stmpe_enable - enable blocks on an STMPE device
123 * @stmpe: Device to work on
124 * @blocks: Mask of blocks (enum stmpe_block values) to enable
125 */
stmpe_enable(struct stmpe * stmpe,unsigned int blocks)126 int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
127 {
128 int ret;
129
130 mutex_lock(&stmpe->lock);
131 ret = __stmpe_enable(stmpe, blocks);
132 mutex_unlock(&stmpe->lock);
133
134 return ret;
135 }
136 EXPORT_SYMBOL_GPL(stmpe_enable);
137
138 /**
139 * stmpe_disable - disable blocks on an STMPE device
140 * @stmpe: Device to work on
141 * @blocks: Mask of blocks (enum stmpe_block values) to enable
142 */
stmpe_disable(struct stmpe * stmpe,unsigned int blocks)143 int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
144 {
145 int ret;
146
147 mutex_lock(&stmpe->lock);
148 ret = __stmpe_disable(stmpe, blocks);
149 mutex_unlock(&stmpe->lock);
150
151 return ret;
152 }
153 EXPORT_SYMBOL_GPL(stmpe_disable);
154
155 /**
156 * stmpe_reg_read() - read a single STMPE register
157 * @stmpe: Device to read from
158 * @reg: Register to read
159 */
stmpe_reg_read(struct stmpe * stmpe,u8 reg)160 int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
161 {
162 int ret;
163
164 mutex_lock(&stmpe->lock);
165 ret = __stmpe_reg_read(stmpe, reg);
166 mutex_unlock(&stmpe->lock);
167
168 return ret;
169 }
170 EXPORT_SYMBOL_GPL(stmpe_reg_read);
171
172 /**
173 * stmpe_reg_write() - write a single STMPE register
174 * @stmpe: Device to write to
175 * @reg: Register to write
176 * @val: Value to write
177 */
stmpe_reg_write(struct stmpe * stmpe,u8 reg,u8 val)178 int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
179 {
180 int ret;
181
182 mutex_lock(&stmpe->lock);
183 ret = __stmpe_reg_write(stmpe, reg, val);
184 mutex_unlock(&stmpe->lock);
185
186 return ret;
187 }
188 EXPORT_SYMBOL_GPL(stmpe_reg_write);
189
190 /**
191 * stmpe_set_bits() - set the value of a bitfield in a STMPE register
192 * @stmpe: Device to write to
193 * @reg: Register to write
194 * @mask: Mask of bits to set
195 * @val: Value to set
196 */
stmpe_set_bits(struct stmpe * stmpe,u8 reg,u8 mask,u8 val)197 int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
198 {
199 int ret;
200
201 mutex_lock(&stmpe->lock);
202 ret = __stmpe_set_bits(stmpe, reg, mask, val);
203 mutex_unlock(&stmpe->lock);
204
205 return ret;
206 }
207 EXPORT_SYMBOL_GPL(stmpe_set_bits);
208
209 /**
210 * stmpe_block_read() - read multiple STMPE registers
211 * @stmpe: Device to read from
212 * @reg: First register
213 * @length: Number of registers
214 * @values: Buffer to write to
215 */
stmpe_block_read(struct stmpe * stmpe,u8 reg,u8 length,u8 * values)216 int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
217 {
218 int ret;
219
220 mutex_lock(&stmpe->lock);
221 ret = __stmpe_block_read(stmpe, reg, length, values);
222 mutex_unlock(&stmpe->lock);
223
224 return ret;
225 }
226 EXPORT_SYMBOL_GPL(stmpe_block_read);
227
228 /**
229 * stmpe_block_write() - write multiple STMPE registers
230 * @stmpe: Device to write to
231 * @reg: First register
232 * @length: Number of registers
233 * @values: Values to write
234 */
stmpe_block_write(struct stmpe * stmpe,u8 reg,u8 length,const u8 * values)235 int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
236 const u8 *values)
237 {
238 int ret;
239
240 mutex_lock(&stmpe->lock);
241 ret = __stmpe_block_write(stmpe, reg, length, values);
242 mutex_unlock(&stmpe->lock);
243
244 return ret;
245 }
246 EXPORT_SYMBOL_GPL(stmpe_block_write);
247
248 /**
249 * stmpe_set_altfunc()- set the alternate function for STMPE pins
250 * @stmpe: Device to configure
251 * @pins: Bitmask of pins to affect
252 * @block: block to enable alternate functions for
253 *
254 * @pins is assumed to have a bit set for each of the bits whose alternate
255 * function is to be changed, numbered according to the GPIOXY numbers.
256 *
257 * If the GPIO module is not enabled, this function automatically enables it in
258 * order to perform the change.
259 */
stmpe_set_altfunc(struct stmpe * stmpe,u32 pins,enum stmpe_block block)260 int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
261 {
262 struct stmpe_variant_info *variant = stmpe->variant;
263 u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
264 int af_bits = variant->af_bits;
265 int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
266 int mask = (1 << af_bits) - 1;
267 u8 regs[8];
268 int af, afperreg, ret;
269
270 if (!variant->get_altfunc)
271 return 0;
272
273 afperreg = 8 / af_bits;
274 mutex_lock(&stmpe->lock);
275
276 ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
277 if (ret < 0)
278 goto out;
279
280 ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
281 if (ret < 0)
282 goto out;
283
284 af = variant->get_altfunc(stmpe, block);
285
286 while (pins) {
287 int pin = __ffs(pins);
288 int regoffset = numregs - (pin / afperreg) - 1;
289 int pos = (pin % afperreg) * (8 / afperreg);
290
291 regs[regoffset] &= ~(mask << pos);
292 regs[regoffset] |= af << pos;
293
294 pins &= ~(1 << pin);
295 }
296
297 ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
298
299 out:
300 mutex_unlock(&stmpe->lock);
301 return ret;
302 }
303 EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
304
305 /*
306 * GPIO (all variants)
307 */
308
309 static struct resource stmpe_gpio_resources[] = {
310 /* Start and end filled dynamically */
311 {
312 .flags = IORESOURCE_IRQ,
313 },
314 };
315
316 static const struct mfd_cell stmpe_gpio_cell = {
317 .name = "stmpe-gpio",
318 .of_compatible = "st,stmpe-gpio",
319 .resources = stmpe_gpio_resources,
320 .num_resources = ARRAY_SIZE(stmpe_gpio_resources),
321 };
322
323 static const struct mfd_cell stmpe_gpio_cell_noirq = {
324 .name = "stmpe-gpio",
325 .of_compatible = "st,stmpe-gpio",
326 /* gpio cell resources consist of an irq only so no resources here */
327 };
328
329 /*
330 * Keypad (1601, 2401, 2403)
331 */
332
333 static struct resource stmpe_keypad_resources[] = {
334 /* Start and end filled dynamically */
335 {
336 .name = "KEYPAD",
337 .flags = IORESOURCE_IRQ,
338 },
339 {
340 .name = "KEYPAD_OVER",
341 .flags = IORESOURCE_IRQ,
342 },
343 };
344
345 static const struct mfd_cell stmpe_keypad_cell = {
346 .name = "stmpe-keypad",
347 .of_compatible = "st,stmpe-keypad",
348 .resources = stmpe_keypad_resources,
349 .num_resources = ARRAY_SIZE(stmpe_keypad_resources),
350 };
351
352 /*
353 * PWM (1601, 2401, 2403)
354 */
355 static struct resource stmpe_pwm_resources[] = {
356 /* Start and end filled dynamically */
357 {
358 .name = "PWM0",
359 .flags = IORESOURCE_IRQ,
360 },
361 {
362 .name = "PWM1",
363 .flags = IORESOURCE_IRQ,
364 },
365 {
366 .name = "PWM2",
367 .flags = IORESOURCE_IRQ,
368 },
369 };
370
371 static const struct mfd_cell stmpe_pwm_cell = {
372 .name = "stmpe-pwm",
373 .of_compatible = "st,stmpe-pwm",
374 .resources = stmpe_pwm_resources,
375 .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
376 };
377
378 /*
379 * STMPE801
380 */
381 static const u8 stmpe801_regs[] = {
382 [STMPE_IDX_CHIP_ID] = STMPE801_REG_CHIP_ID,
383 [STMPE_IDX_ICR_LSB] = STMPE801_REG_SYS_CTRL,
384 [STMPE_IDX_GPMR_LSB] = STMPE801_REG_GPIO_MP_STA,
385 [STMPE_IDX_GPSR_LSB] = STMPE801_REG_GPIO_SET_PIN,
386 [STMPE_IDX_GPCR_LSB] = STMPE801_REG_GPIO_SET_PIN,
387 [STMPE_IDX_GPDR_LSB] = STMPE801_REG_GPIO_DIR,
388 [STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
389 [STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
390
391 };
392
393 static struct stmpe_variant_block stmpe801_blocks[] = {
394 {
395 .cell = &stmpe_gpio_cell,
396 .irq = 0,
397 .block = STMPE_BLOCK_GPIO,
398 },
399 };
400
401 static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
402 {
403 .cell = &stmpe_gpio_cell_noirq,
404 .block = STMPE_BLOCK_GPIO,
405 },
406 };
407
stmpe801_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)408 static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
409 bool enable)
410 {
411 if (blocks & STMPE_BLOCK_GPIO)
412 return 0;
413 else
414 return -EINVAL;
415 }
416
417 static struct stmpe_variant_info stmpe801 = {
418 .name = "stmpe801",
419 .id_val = STMPE801_ID,
420 .id_mask = 0xffff,
421 .num_gpios = 8,
422 .regs = stmpe801_regs,
423 .blocks = stmpe801_blocks,
424 .num_blocks = ARRAY_SIZE(stmpe801_blocks),
425 .num_irqs = STMPE801_NR_INTERNAL_IRQS,
426 .enable = stmpe801_enable,
427 };
428
429 static struct stmpe_variant_info stmpe801_noirq = {
430 .name = "stmpe801",
431 .id_val = STMPE801_ID,
432 .id_mask = 0xffff,
433 .num_gpios = 8,
434 .regs = stmpe801_regs,
435 .blocks = stmpe801_blocks_noirq,
436 .num_blocks = ARRAY_SIZE(stmpe801_blocks_noirq),
437 .enable = stmpe801_enable,
438 };
439
440 /*
441 * Touchscreen (STMPE811 or STMPE610)
442 */
443
444 static struct resource stmpe_ts_resources[] = {
445 /* Start and end filled dynamically */
446 {
447 .name = "TOUCH_DET",
448 .flags = IORESOURCE_IRQ,
449 },
450 {
451 .name = "FIFO_TH",
452 .flags = IORESOURCE_IRQ,
453 },
454 };
455
456 static const struct mfd_cell stmpe_ts_cell = {
457 .name = "stmpe-ts",
458 .of_compatible = "st,stmpe-ts",
459 .resources = stmpe_ts_resources,
460 .num_resources = ARRAY_SIZE(stmpe_ts_resources),
461 };
462
463 /*
464 * ADC (STMPE811)
465 */
466
467 static struct resource stmpe_adc_resources[] = {
468 /* Start and end filled dynamically */
469 {
470 .name = "STMPE_TEMP_SENS",
471 .flags = IORESOURCE_IRQ,
472 },
473 {
474 .name = "STMPE_ADC",
475 .flags = IORESOURCE_IRQ,
476 },
477 };
478
479 static const struct mfd_cell stmpe_adc_cell = {
480 .name = "stmpe-adc",
481 .of_compatible = "st,stmpe-adc",
482 .resources = stmpe_adc_resources,
483 .num_resources = ARRAY_SIZE(stmpe_adc_resources),
484 };
485
486 /*
487 * STMPE811 or STMPE610
488 */
489
490 static const u8 stmpe811_regs[] = {
491 [STMPE_IDX_CHIP_ID] = STMPE811_REG_CHIP_ID,
492 [STMPE_IDX_SYS_CTRL] = STMPE811_REG_SYS_CTRL,
493 [STMPE_IDX_SYS_CTRL2] = STMPE811_REG_SYS_CTRL2,
494 [STMPE_IDX_ICR_LSB] = STMPE811_REG_INT_CTRL,
495 [STMPE_IDX_IER_LSB] = STMPE811_REG_INT_EN,
496 [STMPE_IDX_ISR_MSB] = STMPE811_REG_INT_STA,
497 [STMPE_IDX_GPMR_LSB] = STMPE811_REG_GPIO_MP_STA,
498 [STMPE_IDX_GPSR_LSB] = STMPE811_REG_GPIO_SET_PIN,
499 [STMPE_IDX_GPCR_LSB] = STMPE811_REG_GPIO_CLR_PIN,
500 [STMPE_IDX_GPDR_LSB] = STMPE811_REG_GPIO_DIR,
501 [STMPE_IDX_GPRER_LSB] = STMPE811_REG_GPIO_RE,
502 [STMPE_IDX_GPFER_LSB] = STMPE811_REG_GPIO_FE,
503 [STMPE_IDX_GPAFR_U_MSB] = STMPE811_REG_GPIO_AF,
504 [STMPE_IDX_IEGPIOR_LSB] = STMPE811_REG_GPIO_INT_EN,
505 [STMPE_IDX_ISGPIOR_MSB] = STMPE811_REG_GPIO_INT_STA,
506 [STMPE_IDX_GPEDR_LSB] = STMPE811_REG_GPIO_ED,
507 };
508
509 static struct stmpe_variant_block stmpe811_blocks[] = {
510 {
511 .cell = &stmpe_gpio_cell,
512 .irq = STMPE811_IRQ_GPIOC,
513 .block = STMPE_BLOCK_GPIO,
514 },
515 {
516 .cell = &stmpe_ts_cell,
517 .irq = STMPE811_IRQ_TOUCH_DET,
518 .block = STMPE_BLOCK_TOUCHSCREEN,
519 },
520 {
521 .cell = &stmpe_adc_cell,
522 .irq = STMPE811_IRQ_TEMP_SENS,
523 .block = STMPE_BLOCK_ADC,
524 },
525 };
526
stmpe811_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)527 static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
528 bool enable)
529 {
530 unsigned int mask = 0;
531
532 if (blocks & STMPE_BLOCK_GPIO)
533 mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
534
535 if (blocks & STMPE_BLOCK_ADC)
536 mask |= STMPE811_SYS_CTRL2_ADC_OFF;
537
538 if (blocks & STMPE_BLOCK_TOUCHSCREEN)
539 mask |= STMPE811_SYS_CTRL2_TSC_OFF;
540
541 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2], mask,
542 enable ? 0 : mask);
543 }
544
stmpe811_adc_common_init(struct stmpe * stmpe)545 int stmpe811_adc_common_init(struct stmpe *stmpe)
546 {
547 int ret;
548 u8 adc_ctrl1, adc_ctrl1_mask;
549
550 adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
551 STMPE_MOD_12B(stmpe->mod_12b) |
552 STMPE_REF_SEL(stmpe->ref_sel);
553 adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
554 STMPE_REF_SEL(0xff);
555
556 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
557 adc_ctrl1_mask, adc_ctrl1);
558 if (ret) {
559 dev_err(stmpe->dev, "Could not setup ADC\n");
560 return ret;
561 }
562
563 ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
564 STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
565 if (ret) {
566 dev_err(stmpe->dev, "Could not setup ADC\n");
567 return ret;
568 }
569
570 return 0;
571 }
572 EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
573
stmpe811_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)574 static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
575 {
576 /* 0 for touchscreen, 1 for GPIO */
577 return block != STMPE_BLOCK_TOUCHSCREEN;
578 }
579
580 static struct stmpe_variant_info stmpe811 = {
581 .name = "stmpe811",
582 .id_val = 0x0811,
583 .id_mask = 0xffff,
584 .num_gpios = 8,
585 .af_bits = 1,
586 .regs = stmpe811_regs,
587 .blocks = stmpe811_blocks,
588 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
589 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
590 .enable = stmpe811_enable,
591 .get_altfunc = stmpe811_get_altfunc,
592 };
593
594 /* Similar to 811, except number of gpios */
595 static struct stmpe_variant_info stmpe610 = {
596 .name = "stmpe610",
597 .id_val = 0x0811,
598 .id_mask = 0xffff,
599 .num_gpios = 6,
600 .af_bits = 1,
601 .regs = stmpe811_regs,
602 .blocks = stmpe811_blocks,
603 .num_blocks = ARRAY_SIZE(stmpe811_blocks),
604 .num_irqs = STMPE811_NR_INTERNAL_IRQS,
605 .enable = stmpe811_enable,
606 .get_altfunc = stmpe811_get_altfunc,
607 };
608
609 /*
610 * STMPE1600
611 * Compared to all others STMPE variant, LSB and MSB regs are located in this
612 * order : LSB addr
613 * MSB addr + 1
614 * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
615 */
616
617 static const u8 stmpe1600_regs[] = {
618 [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID,
619 [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL,
620 [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL,
621 [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB,
622 [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB,
623 [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB,
624 [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB,
625 [STMPE_IDX_GPCR_LSB] = STMPE1600_REG_GPSR_LSB,
626 [STMPE_IDX_GPCR_CSB] = STMPE1600_REG_GPSR_MSB,
627 [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB,
628 [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB,
629 [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB,
630 [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB,
631 [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB,
632 };
633
634 static struct stmpe_variant_block stmpe1600_blocks[] = {
635 {
636 .cell = &stmpe_gpio_cell,
637 .irq = 0,
638 .block = STMPE_BLOCK_GPIO,
639 },
640 };
641
stmpe1600_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)642 static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
643 bool enable)
644 {
645 if (blocks & STMPE_BLOCK_GPIO)
646 return 0;
647 else
648 return -EINVAL;
649 }
650
651 static struct stmpe_variant_info stmpe1600 = {
652 .name = "stmpe1600",
653 .id_val = STMPE1600_ID,
654 .id_mask = 0xffff,
655 .num_gpios = 16,
656 .af_bits = 0,
657 .regs = stmpe1600_regs,
658 .blocks = stmpe1600_blocks,
659 .num_blocks = ARRAY_SIZE(stmpe1600_blocks),
660 .num_irqs = STMPE1600_NR_INTERNAL_IRQS,
661 .enable = stmpe1600_enable,
662 };
663
664 /*
665 * STMPE1601
666 */
667
668 static const u8 stmpe1601_regs[] = {
669 [STMPE_IDX_CHIP_ID] = STMPE1601_REG_CHIP_ID,
670 [STMPE_IDX_SYS_CTRL] = STMPE1601_REG_SYS_CTRL,
671 [STMPE_IDX_SYS_CTRL2] = STMPE1601_REG_SYS_CTRL2,
672 [STMPE_IDX_ICR_LSB] = STMPE1601_REG_ICR_LSB,
673 [STMPE_IDX_IER_MSB] = STMPE1601_REG_IER_MSB,
674 [STMPE_IDX_IER_LSB] = STMPE1601_REG_IER_LSB,
675 [STMPE_IDX_ISR_MSB] = STMPE1601_REG_ISR_MSB,
676 [STMPE_IDX_GPMR_LSB] = STMPE1601_REG_GPIO_MP_LSB,
677 [STMPE_IDX_GPMR_CSB] = STMPE1601_REG_GPIO_MP_MSB,
678 [STMPE_IDX_GPSR_LSB] = STMPE1601_REG_GPIO_SET_LSB,
679 [STMPE_IDX_GPSR_CSB] = STMPE1601_REG_GPIO_SET_MSB,
680 [STMPE_IDX_GPCR_LSB] = STMPE1601_REG_GPIO_CLR_LSB,
681 [STMPE_IDX_GPCR_CSB] = STMPE1601_REG_GPIO_CLR_MSB,
682 [STMPE_IDX_GPDR_LSB] = STMPE1601_REG_GPIO_SET_DIR_LSB,
683 [STMPE_IDX_GPDR_CSB] = STMPE1601_REG_GPIO_SET_DIR_MSB,
684 [STMPE_IDX_GPEDR_LSB] = STMPE1601_REG_GPIO_ED_LSB,
685 [STMPE_IDX_GPEDR_CSB] = STMPE1601_REG_GPIO_ED_MSB,
686 [STMPE_IDX_GPRER_LSB] = STMPE1601_REG_GPIO_RE_LSB,
687 [STMPE_IDX_GPRER_CSB] = STMPE1601_REG_GPIO_RE_MSB,
688 [STMPE_IDX_GPFER_LSB] = STMPE1601_REG_GPIO_FE_LSB,
689 [STMPE_IDX_GPFER_CSB] = STMPE1601_REG_GPIO_FE_MSB,
690 [STMPE_IDX_GPPUR_LSB] = STMPE1601_REG_GPIO_PU_LSB,
691 [STMPE_IDX_GPAFR_U_MSB] = STMPE1601_REG_GPIO_AF_U_MSB,
692 [STMPE_IDX_IEGPIOR_LSB] = STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
693 [STMPE_IDX_IEGPIOR_CSB] = STMPE1601_REG_INT_EN_GPIO_MASK_MSB,
694 [STMPE_IDX_ISGPIOR_MSB] = STMPE1601_REG_INT_STA_GPIO_MSB,
695 };
696
697 static struct stmpe_variant_block stmpe1601_blocks[] = {
698 {
699 .cell = &stmpe_gpio_cell,
700 .irq = STMPE1601_IRQ_GPIOC,
701 .block = STMPE_BLOCK_GPIO,
702 },
703 {
704 .cell = &stmpe_keypad_cell,
705 .irq = STMPE1601_IRQ_KEYPAD,
706 .block = STMPE_BLOCK_KEYPAD,
707 },
708 {
709 .cell = &stmpe_pwm_cell,
710 .irq = STMPE1601_IRQ_PWM0,
711 .block = STMPE_BLOCK_PWM,
712 },
713 };
714
715 /* supported autosleep timeout delay (in msecs) */
716 static const int stmpe_autosleep_delay[] = {
717 4, 16, 32, 64, 128, 256, 512, 1024,
718 };
719
stmpe_round_timeout(int timeout)720 static int stmpe_round_timeout(int timeout)
721 {
722 int i;
723
724 for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
725 if (stmpe_autosleep_delay[i] >= timeout)
726 return i;
727 }
728
729 /*
730 * requests for delays longer than supported should not return the
731 * longest supported delay
732 */
733 return -EINVAL;
734 }
735
stmpe_autosleep(struct stmpe * stmpe,int autosleep_timeout)736 static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
737 {
738 int ret;
739
740 if (!stmpe->variant->enable_autosleep)
741 return -ENOSYS;
742
743 mutex_lock(&stmpe->lock);
744 ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
745 mutex_unlock(&stmpe->lock);
746
747 return ret;
748 }
749
750 /*
751 * Both stmpe 1601/2403 support same layout for autosleep
752 */
stmpe1601_autosleep(struct stmpe * stmpe,int autosleep_timeout)753 static int stmpe1601_autosleep(struct stmpe *stmpe,
754 int autosleep_timeout)
755 {
756 int ret, timeout;
757
758 /* choose the best available timeout */
759 timeout = stmpe_round_timeout(autosleep_timeout);
760 if (timeout < 0) {
761 dev_err(stmpe->dev, "invalid timeout\n");
762 return timeout;
763 }
764
765 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
766 STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
767 timeout);
768 if (ret < 0)
769 return ret;
770
771 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL2],
772 STPME1601_AUTOSLEEP_ENABLE,
773 STPME1601_AUTOSLEEP_ENABLE);
774 }
775
stmpe1601_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)776 static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
777 bool enable)
778 {
779 unsigned int mask = 0;
780
781 if (blocks & STMPE_BLOCK_GPIO)
782 mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
783 else
784 mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
785
786 if (blocks & STMPE_BLOCK_KEYPAD)
787 mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
788 else
789 mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
790
791 if (blocks & STMPE_BLOCK_PWM)
792 mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
793 else
794 mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
795
796 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
797 enable ? mask : 0);
798 }
799
stmpe1601_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)800 static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
801 {
802 switch (block) {
803 case STMPE_BLOCK_PWM:
804 return 2;
805
806 case STMPE_BLOCK_KEYPAD:
807 return 1;
808
809 case STMPE_BLOCK_GPIO:
810 default:
811 return 0;
812 }
813 }
814
815 static struct stmpe_variant_info stmpe1601 = {
816 .name = "stmpe1601",
817 .id_val = 0x0210,
818 .id_mask = 0xfff0, /* at least 0x0210 and 0x0212 */
819 .num_gpios = 16,
820 .af_bits = 2,
821 .regs = stmpe1601_regs,
822 .blocks = stmpe1601_blocks,
823 .num_blocks = ARRAY_SIZE(stmpe1601_blocks),
824 .num_irqs = STMPE1601_NR_INTERNAL_IRQS,
825 .enable = stmpe1601_enable,
826 .get_altfunc = stmpe1601_get_altfunc,
827 .enable_autosleep = stmpe1601_autosleep,
828 };
829
830 /*
831 * STMPE1801
832 */
833 static const u8 stmpe1801_regs[] = {
834 [STMPE_IDX_CHIP_ID] = STMPE1801_REG_CHIP_ID,
835 [STMPE_IDX_SYS_CTRL] = STMPE1801_REG_SYS_CTRL,
836 [STMPE_IDX_ICR_LSB] = STMPE1801_REG_INT_CTRL_LOW,
837 [STMPE_IDX_IER_LSB] = STMPE1801_REG_INT_EN_MASK_LOW,
838 [STMPE_IDX_ISR_LSB] = STMPE1801_REG_INT_STA_LOW,
839 [STMPE_IDX_GPMR_LSB] = STMPE1801_REG_GPIO_MP_LOW,
840 [STMPE_IDX_GPMR_CSB] = STMPE1801_REG_GPIO_MP_MID,
841 [STMPE_IDX_GPMR_MSB] = STMPE1801_REG_GPIO_MP_HIGH,
842 [STMPE_IDX_GPSR_LSB] = STMPE1801_REG_GPIO_SET_LOW,
843 [STMPE_IDX_GPSR_CSB] = STMPE1801_REG_GPIO_SET_MID,
844 [STMPE_IDX_GPSR_MSB] = STMPE1801_REG_GPIO_SET_HIGH,
845 [STMPE_IDX_GPCR_LSB] = STMPE1801_REG_GPIO_CLR_LOW,
846 [STMPE_IDX_GPCR_CSB] = STMPE1801_REG_GPIO_CLR_MID,
847 [STMPE_IDX_GPCR_MSB] = STMPE1801_REG_GPIO_CLR_HIGH,
848 [STMPE_IDX_GPDR_LSB] = STMPE1801_REG_GPIO_SET_DIR_LOW,
849 [STMPE_IDX_GPDR_CSB] = STMPE1801_REG_GPIO_SET_DIR_MID,
850 [STMPE_IDX_GPDR_MSB] = STMPE1801_REG_GPIO_SET_DIR_HIGH,
851 [STMPE_IDX_GPRER_LSB] = STMPE1801_REG_GPIO_RE_LOW,
852 [STMPE_IDX_GPRER_CSB] = STMPE1801_REG_GPIO_RE_MID,
853 [STMPE_IDX_GPRER_MSB] = STMPE1801_REG_GPIO_RE_HIGH,
854 [STMPE_IDX_GPFER_LSB] = STMPE1801_REG_GPIO_FE_LOW,
855 [STMPE_IDX_GPFER_CSB] = STMPE1801_REG_GPIO_FE_MID,
856 [STMPE_IDX_GPFER_MSB] = STMPE1801_REG_GPIO_FE_HIGH,
857 [STMPE_IDX_GPPUR_LSB] = STMPE1801_REG_GPIO_PULL_UP_LOW,
858 [STMPE_IDX_IEGPIOR_LSB] = STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
859 [STMPE_IDX_IEGPIOR_CSB] = STMPE1801_REG_INT_EN_GPIO_MASK_MID,
860 [STMPE_IDX_IEGPIOR_MSB] = STMPE1801_REG_INT_EN_GPIO_MASK_HIGH,
861 [STMPE_IDX_ISGPIOR_MSB] = STMPE1801_REG_INT_STA_GPIO_HIGH,
862 };
863
864 static struct stmpe_variant_block stmpe1801_blocks[] = {
865 {
866 .cell = &stmpe_gpio_cell,
867 .irq = STMPE1801_IRQ_GPIOC,
868 .block = STMPE_BLOCK_GPIO,
869 },
870 {
871 .cell = &stmpe_keypad_cell,
872 .irq = STMPE1801_IRQ_KEYPAD,
873 .block = STMPE_BLOCK_KEYPAD,
874 },
875 };
876
stmpe1801_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)877 static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
878 bool enable)
879 {
880 unsigned int mask = 0;
881 if (blocks & STMPE_BLOCK_GPIO)
882 mask |= STMPE1801_MSK_INT_EN_GPIO;
883
884 if (blocks & STMPE_BLOCK_KEYPAD)
885 mask |= STMPE1801_MSK_INT_EN_KPC;
886
887 return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
888 enable ? mask : 0);
889 }
890
stmpe_reset(struct stmpe * stmpe)891 static int stmpe_reset(struct stmpe *stmpe)
892 {
893 u16 id_val = stmpe->variant->id_val;
894 unsigned long timeout;
895 int ret = 0;
896 u8 reset_bit;
897
898 if (id_val == STMPE811_ID)
899 /* STMPE801 and STMPE610 use bit 1 of SYS_CTRL register */
900 reset_bit = STMPE811_SYS_CTRL_RESET;
901 else
902 /* all other STMPE variant use bit 7 of SYS_CTRL register */
903 reset_bit = STMPE_SYS_CTRL_RESET;
904
905 ret = __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL],
906 reset_bit, reset_bit);
907 if (ret < 0)
908 return ret;
909
910 msleep(10);
911
912 timeout = jiffies + msecs_to_jiffies(100);
913 while (time_before(jiffies, timeout)) {
914 ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]);
915 if (ret < 0)
916 return ret;
917 if (!(ret & reset_bit))
918 return 0;
919 usleep_range(100, 200);
920 }
921 return -EIO;
922 }
923
924 static struct stmpe_variant_info stmpe1801 = {
925 .name = "stmpe1801",
926 .id_val = STMPE1801_ID,
927 .id_mask = 0xfff0,
928 .num_gpios = 18,
929 .af_bits = 0,
930 .regs = stmpe1801_regs,
931 .blocks = stmpe1801_blocks,
932 .num_blocks = ARRAY_SIZE(stmpe1801_blocks),
933 .num_irqs = STMPE1801_NR_INTERNAL_IRQS,
934 .enable = stmpe1801_enable,
935 /* stmpe1801 do not have any gpio alternate function */
936 .get_altfunc = NULL,
937 };
938
939 /*
940 * STMPE24XX
941 */
942
943 static const u8 stmpe24xx_regs[] = {
944 [STMPE_IDX_CHIP_ID] = STMPE24XX_REG_CHIP_ID,
945 [STMPE_IDX_SYS_CTRL] = STMPE24XX_REG_SYS_CTRL,
946 [STMPE_IDX_SYS_CTRL2] = STMPE24XX_REG_SYS_CTRL2,
947 [STMPE_IDX_ICR_LSB] = STMPE24XX_REG_ICR_LSB,
948 [STMPE_IDX_IER_MSB] = STMPE24XX_REG_IER_MSB,
949 [STMPE_IDX_IER_LSB] = STMPE24XX_REG_IER_LSB,
950 [STMPE_IDX_ISR_MSB] = STMPE24XX_REG_ISR_MSB,
951 [STMPE_IDX_GPMR_LSB] = STMPE24XX_REG_GPMR_LSB,
952 [STMPE_IDX_GPMR_CSB] = STMPE24XX_REG_GPMR_CSB,
953 [STMPE_IDX_GPMR_MSB] = STMPE24XX_REG_GPMR_MSB,
954 [STMPE_IDX_GPSR_LSB] = STMPE24XX_REG_GPSR_LSB,
955 [STMPE_IDX_GPSR_CSB] = STMPE24XX_REG_GPSR_CSB,
956 [STMPE_IDX_GPSR_MSB] = STMPE24XX_REG_GPSR_MSB,
957 [STMPE_IDX_GPCR_LSB] = STMPE24XX_REG_GPCR_LSB,
958 [STMPE_IDX_GPCR_CSB] = STMPE24XX_REG_GPCR_CSB,
959 [STMPE_IDX_GPCR_MSB] = STMPE24XX_REG_GPCR_MSB,
960 [STMPE_IDX_GPDR_LSB] = STMPE24XX_REG_GPDR_LSB,
961 [STMPE_IDX_GPDR_CSB] = STMPE24XX_REG_GPDR_CSB,
962 [STMPE_IDX_GPDR_MSB] = STMPE24XX_REG_GPDR_MSB,
963 [STMPE_IDX_GPRER_LSB] = STMPE24XX_REG_GPRER_LSB,
964 [STMPE_IDX_GPRER_CSB] = STMPE24XX_REG_GPRER_CSB,
965 [STMPE_IDX_GPRER_MSB] = STMPE24XX_REG_GPRER_MSB,
966 [STMPE_IDX_GPFER_LSB] = STMPE24XX_REG_GPFER_LSB,
967 [STMPE_IDX_GPFER_CSB] = STMPE24XX_REG_GPFER_CSB,
968 [STMPE_IDX_GPFER_MSB] = STMPE24XX_REG_GPFER_MSB,
969 [STMPE_IDX_GPPUR_LSB] = STMPE24XX_REG_GPPUR_LSB,
970 [STMPE_IDX_GPPDR_LSB] = STMPE24XX_REG_GPPDR_LSB,
971 [STMPE_IDX_GPAFR_U_MSB] = STMPE24XX_REG_GPAFR_U_MSB,
972 [STMPE_IDX_IEGPIOR_LSB] = STMPE24XX_REG_IEGPIOR_LSB,
973 [STMPE_IDX_IEGPIOR_CSB] = STMPE24XX_REG_IEGPIOR_CSB,
974 [STMPE_IDX_IEGPIOR_MSB] = STMPE24XX_REG_IEGPIOR_MSB,
975 [STMPE_IDX_ISGPIOR_MSB] = STMPE24XX_REG_ISGPIOR_MSB,
976 [STMPE_IDX_GPEDR_LSB] = STMPE24XX_REG_GPEDR_LSB,
977 [STMPE_IDX_GPEDR_CSB] = STMPE24XX_REG_GPEDR_CSB,
978 [STMPE_IDX_GPEDR_MSB] = STMPE24XX_REG_GPEDR_MSB,
979 };
980
981 static struct stmpe_variant_block stmpe24xx_blocks[] = {
982 {
983 .cell = &stmpe_gpio_cell,
984 .irq = STMPE24XX_IRQ_GPIOC,
985 .block = STMPE_BLOCK_GPIO,
986 },
987 {
988 .cell = &stmpe_keypad_cell,
989 .irq = STMPE24XX_IRQ_KEYPAD,
990 .block = STMPE_BLOCK_KEYPAD,
991 },
992 {
993 .cell = &stmpe_pwm_cell,
994 .irq = STMPE24XX_IRQ_PWM0,
995 .block = STMPE_BLOCK_PWM,
996 },
997 };
998
stmpe24xx_enable(struct stmpe * stmpe,unsigned int blocks,bool enable)999 static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
1000 bool enable)
1001 {
1002 unsigned int mask = 0;
1003
1004 if (blocks & STMPE_BLOCK_GPIO)
1005 mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
1006
1007 if (blocks & STMPE_BLOCK_KEYPAD)
1008 mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
1009
1010 return __stmpe_set_bits(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL], mask,
1011 enable ? mask : 0);
1012 }
1013
stmpe24xx_get_altfunc(struct stmpe * stmpe,enum stmpe_block block)1014 static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
1015 {
1016 switch (block) {
1017 case STMPE_BLOCK_ROTATOR:
1018 return 2;
1019
1020 case STMPE_BLOCK_KEYPAD:
1021 case STMPE_BLOCK_PWM:
1022 return 1;
1023
1024 case STMPE_BLOCK_GPIO:
1025 default:
1026 return 0;
1027 }
1028 }
1029
1030 static struct stmpe_variant_info stmpe2401 = {
1031 .name = "stmpe2401",
1032 .id_val = 0x0101,
1033 .id_mask = 0xffff,
1034 .num_gpios = 24,
1035 .af_bits = 2,
1036 .regs = stmpe24xx_regs,
1037 .blocks = stmpe24xx_blocks,
1038 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1039 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1040 .enable = stmpe24xx_enable,
1041 .get_altfunc = stmpe24xx_get_altfunc,
1042 };
1043
1044 static struct stmpe_variant_info stmpe2403 = {
1045 .name = "stmpe2403",
1046 .id_val = 0x0120,
1047 .id_mask = 0xffff,
1048 .num_gpios = 24,
1049 .af_bits = 2,
1050 .regs = stmpe24xx_regs,
1051 .blocks = stmpe24xx_blocks,
1052 .num_blocks = ARRAY_SIZE(stmpe24xx_blocks),
1053 .num_irqs = STMPE24XX_NR_INTERNAL_IRQS,
1054 .enable = stmpe24xx_enable,
1055 .get_altfunc = stmpe24xx_get_altfunc,
1056 .enable_autosleep = stmpe1601_autosleep, /* same as stmpe1601 */
1057 };
1058
1059 static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
1060 [STMPE610] = &stmpe610,
1061 [STMPE801] = &stmpe801,
1062 [STMPE811] = &stmpe811,
1063 [STMPE1600] = &stmpe1600,
1064 [STMPE1601] = &stmpe1601,
1065 [STMPE1801] = &stmpe1801,
1066 [STMPE2401] = &stmpe2401,
1067 [STMPE2403] = &stmpe2403,
1068 };
1069
1070 /*
1071 * These devices can be connected in a 'no-irq' configuration - the irq pin
1072 * is not used and the device cannot interrupt the CPU. Here we only list
1073 * devices which support this configuration - the driver will fail probing
1074 * for any devices not listed here which are configured in this way.
1075 */
1076 static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
1077 [STMPE801] = &stmpe801_noirq,
1078 };
1079
stmpe_irq(int irq,void * data)1080 static irqreturn_t stmpe_irq(int irq, void *data)
1081 {
1082 struct stmpe *stmpe = data;
1083 struct stmpe_variant_info *variant = stmpe->variant;
1084 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1085 u8 israddr;
1086 u8 isr[3];
1087 int ret;
1088 int i;
1089
1090 if (variant->id_val == STMPE801_ID ||
1091 variant->id_val == STMPE1600_ID) {
1092 int base = irq_find_mapping(stmpe->domain, 0);
1093
1094 handle_nested_irq(base);
1095 return IRQ_HANDLED;
1096 }
1097
1098 if (variant->id_val == STMPE1801_ID)
1099 israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
1100 else
1101 israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
1102
1103 ret = stmpe_block_read(stmpe, israddr, num, isr);
1104 if (ret < 0)
1105 return IRQ_NONE;
1106
1107 for (i = 0; i < num; i++) {
1108 int bank = num - i - 1;
1109 u8 status = isr[i];
1110 u8 clear;
1111
1112 status &= stmpe->ier[bank];
1113 if (!status)
1114 continue;
1115
1116 clear = status;
1117 while (status) {
1118 int bit = __ffs(status);
1119 int line = bank * 8 + bit;
1120 int nestedirq = irq_find_mapping(stmpe->domain, line);
1121
1122 handle_nested_irq(nestedirq);
1123 status &= ~(1 << bit);
1124 }
1125
1126 stmpe_reg_write(stmpe, israddr + i, clear);
1127 }
1128
1129 return IRQ_HANDLED;
1130 }
1131
stmpe_irq_lock(struct irq_data * data)1132 static void stmpe_irq_lock(struct irq_data *data)
1133 {
1134 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1135
1136 mutex_lock(&stmpe->irq_lock);
1137 }
1138
stmpe_irq_sync_unlock(struct irq_data * data)1139 static void stmpe_irq_sync_unlock(struct irq_data *data)
1140 {
1141 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1142 struct stmpe_variant_info *variant = stmpe->variant;
1143 int num = DIV_ROUND_UP(variant->num_irqs, 8);
1144 int i;
1145
1146 for (i = 0; i < num; i++) {
1147 u8 new = stmpe->ier[i];
1148 u8 old = stmpe->oldier[i];
1149
1150 if (new == old)
1151 continue;
1152
1153 stmpe->oldier[i] = new;
1154 stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB + i], new);
1155 }
1156
1157 mutex_unlock(&stmpe->irq_lock);
1158 }
1159
stmpe_irq_mask(struct irq_data * data)1160 static void stmpe_irq_mask(struct irq_data *data)
1161 {
1162 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1163 int offset = data->hwirq;
1164 int regoffset = offset / 8;
1165 int mask = 1 << (offset % 8);
1166
1167 stmpe->ier[regoffset] &= ~mask;
1168 }
1169
stmpe_irq_unmask(struct irq_data * data)1170 static void stmpe_irq_unmask(struct irq_data *data)
1171 {
1172 struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
1173 int offset = data->hwirq;
1174 int regoffset = offset / 8;
1175 int mask = 1 << (offset % 8);
1176
1177 stmpe->ier[regoffset] |= mask;
1178 }
1179
1180 static struct irq_chip stmpe_irq_chip = {
1181 .name = "stmpe",
1182 .irq_bus_lock = stmpe_irq_lock,
1183 .irq_bus_sync_unlock = stmpe_irq_sync_unlock,
1184 .irq_mask = stmpe_irq_mask,
1185 .irq_unmask = stmpe_irq_unmask,
1186 };
1187
stmpe_irq_map(struct irq_domain * d,unsigned int virq,irq_hw_number_t hwirq)1188 static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
1189 irq_hw_number_t hwirq)
1190 {
1191 struct stmpe *stmpe = d->host_data;
1192 struct irq_chip *chip = NULL;
1193
1194 if (stmpe->variant->id_val != STMPE801_ID)
1195 chip = &stmpe_irq_chip;
1196
1197 irq_set_chip_data(virq, stmpe);
1198 irq_set_chip_and_handler(virq, chip, handle_edge_irq);
1199 irq_set_nested_thread(virq, 1);
1200 irq_set_noprobe(virq);
1201
1202 return 0;
1203 }
1204
stmpe_irq_unmap(struct irq_domain * d,unsigned int virq)1205 static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
1206 {
1207 irq_set_chip_and_handler(virq, NULL, NULL);
1208 irq_set_chip_data(virq, NULL);
1209 }
1210
1211 static const struct irq_domain_ops stmpe_irq_ops = {
1212 .map = stmpe_irq_map,
1213 .unmap = stmpe_irq_unmap,
1214 .xlate = irq_domain_xlate_twocell,
1215 };
1216
stmpe_irq_init(struct stmpe * stmpe,struct device_node * np)1217 static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
1218 {
1219 int base = 0;
1220 int num_irqs = stmpe->variant->num_irqs;
1221
1222 stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
1223 &stmpe_irq_ops, stmpe);
1224 if (!stmpe->domain) {
1225 dev_err(stmpe->dev, "Failed to create irqdomain\n");
1226 return -ENOSYS;
1227 }
1228
1229 return 0;
1230 }
1231
stmpe_chip_init(struct stmpe * stmpe)1232 static int stmpe_chip_init(struct stmpe *stmpe)
1233 {
1234 unsigned int irq_trigger = stmpe->pdata->irq_trigger;
1235 int autosleep_timeout = stmpe->pdata->autosleep_timeout;
1236 struct stmpe_variant_info *variant = stmpe->variant;
1237 u8 icr = 0;
1238 unsigned int id;
1239 u8 data[2];
1240 int ret;
1241
1242 ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
1243 ARRAY_SIZE(data), data);
1244 if (ret < 0)
1245 return ret;
1246
1247 id = (data[0] << 8) | data[1];
1248 if ((id & variant->id_mask) != variant->id_val) {
1249 dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
1250 return -EINVAL;
1251 }
1252
1253 dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
1254
1255 /* Disable all modules -- subdrivers should enable what they need. */
1256 ret = stmpe_disable(stmpe, ~0);
1257 if (ret)
1258 return ret;
1259
1260 ret = stmpe_reset(stmpe);
1261 if (ret < 0)
1262 return ret;
1263
1264 if (stmpe->irq >= 0) {
1265 if (id == STMPE801_ID || id == STMPE1600_ID)
1266 icr = STMPE_SYS_CTRL_INT_EN;
1267 else
1268 icr = STMPE_ICR_LSB_GIM;
1269
1270 /* STMPE801 and STMPE1600 don't support Edge interrupts */
1271 if (id != STMPE801_ID && id != STMPE1600_ID) {
1272 if (irq_trigger == IRQF_TRIGGER_FALLING ||
1273 irq_trigger == IRQF_TRIGGER_RISING)
1274 icr |= STMPE_ICR_LSB_EDGE;
1275 }
1276
1277 if (irq_trigger == IRQF_TRIGGER_RISING ||
1278 irq_trigger == IRQF_TRIGGER_HIGH) {
1279 if (id == STMPE801_ID || id == STMPE1600_ID)
1280 icr |= STMPE_SYS_CTRL_INT_HI;
1281 else
1282 icr |= STMPE_ICR_LSB_HIGH;
1283 }
1284 }
1285
1286 if (stmpe->pdata->autosleep) {
1287 ret = stmpe_autosleep(stmpe, autosleep_timeout);
1288 if (ret)
1289 return ret;
1290 }
1291
1292 return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
1293 }
1294
stmpe_add_device(struct stmpe * stmpe,const struct mfd_cell * cell)1295 static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
1296 {
1297 return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
1298 NULL, 0, stmpe->domain);
1299 }
1300
stmpe_devices_init(struct stmpe * stmpe)1301 static int stmpe_devices_init(struct stmpe *stmpe)
1302 {
1303 struct stmpe_variant_info *variant = stmpe->variant;
1304 unsigned int platform_blocks = stmpe->pdata->blocks;
1305 int ret = -EINVAL;
1306 int i, j;
1307
1308 for (i = 0; i < variant->num_blocks; i++) {
1309 struct stmpe_variant_block *block = &variant->blocks[i];
1310
1311 if (!(platform_blocks & block->block))
1312 continue;
1313
1314 for (j = 0; j < block->cell->num_resources; j++) {
1315 struct resource *res =
1316 (struct resource *) &block->cell->resources[j];
1317
1318 /* Dynamically fill in a variant's IRQ. */
1319 if (res->flags & IORESOURCE_IRQ)
1320 res->start = res->end = block->irq + j;
1321 }
1322
1323 platform_blocks &= ~block->block;
1324 ret = stmpe_add_device(stmpe, block->cell);
1325 if (ret)
1326 return ret;
1327 }
1328
1329 if (platform_blocks)
1330 dev_warn(stmpe->dev,
1331 "platform wants blocks (%#x) not present on variant",
1332 platform_blocks);
1333
1334 return ret;
1335 }
1336
stmpe_of_probe(struct stmpe_platform_data * pdata,struct device_node * np)1337 static void stmpe_of_probe(struct stmpe_platform_data *pdata,
1338 struct device_node *np)
1339 {
1340 struct device_node *child;
1341
1342 pdata->id = of_alias_get_id(np, "stmpe-i2c");
1343 if (pdata->id < 0)
1344 pdata->id = -1;
1345
1346 of_property_read_u32(np, "st,autosleep-timeout",
1347 &pdata->autosleep_timeout);
1348
1349 pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
1350
1351 for_each_available_child_of_node(np, child) {
1352 if (of_device_is_compatible(child, stmpe_gpio_cell.of_compatible))
1353 pdata->blocks |= STMPE_BLOCK_GPIO;
1354 else if (of_device_is_compatible(child, stmpe_keypad_cell.of_compatible))
1355 pdata->blocks |= STMPE_BLOCK_KEYPAD;
1356 else if (of_device_is_compatible(child, stmpe_ts_cell.of_compatible))
1357 pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
1358 else if (of_device_is_compatible(child, stmpe_adc_cell.of_compatible))
1359 pdata->blocks |= STMPE_BLOCK_ADC;
1360 else if (of_device_is_compatible(child, stmpe_pwm_cell.of_compatible))
1361 pdata->blocks |= STMPE_BLOCK_PWM;
1362 }
1363 }
1364
1365 /* Called from client specific probe routines */
stmpe_probe(struct stmpe_client_info * ci,enum stmpe_partnum partnum)1366 int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
1367 {
1368 struct stmpe_platform_data *pdata;
1369 struct device_node *np = ci->dev->of_node;
1370 struct stmpe *stmpe;
1371 struct gpio_desc *irq_gpio;
1372 int ret;
1373 u32 val;
1374
1375 pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
1376 if (!pdata)
1377 return -ENOMEM;
1378
1379 stmpe_of_probe(pdata, np);
1380
1381 if (of_find_property(np, "interrupts", NULL) == NULL)
1382 ci->irq = -1;
1383
1384 stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
1385 if (!stmpe)
1386 return -ENOMEM;
1387
1388 mutex_init(&stmpe->irq_lock);
1389 mutex_init(&stmpe->lock);
1390
1391 if (!of_property_read_u32(np, "st,sample-time", &val))
1392 stmpe->sample_time = val;
1393 if (!of_property_read_u32(np, "st,mod-12b", &val))
1394 stmpe->mod_12b = val;
1395 if (!of_property_read_u32(np, "st,ref-sel", &val))
1396 stmpe->ref_sel = val;
1397 if (!of_property_read_u32(np, "st,adc-freq", &val))
1398 stmpe->adc_freq = val;
1399
1400 stmpe->dev = ci->dev;
1401 stmpe->client = ci->client;
1402 stmpe->pdata = pdata;
1403 stmpe->ci = ci;
1404 stmpe->partnum = partnum;
1405 stmpe->variant = stmpe_variant_info[partnum];
1406 stmpe->regs = stmpe->variant->regs;
1407 stmpe->num_gpios = stmpe->variant->num_gpios;
1408 stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
1409 if (!IS_ERR(stmpe->vcc)) {
1410 ret = regulator_enable(stmpe->vcc);
1411 if (ret)
1412 dev_warn(ci->dev, "failed to enable VCC supply\n");
1413 }
1414 stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
1415 if (!IS_ERR(stmpe->vio)) {
1416 ret = regulator_enable(stmpe->vio);
1417 if (ret)
1418 dev_warn(ci->dev, "failed to enable VIO supply\n");
1419 }
1420 dev_set_drvdata(stmpe->dev, stmpe);
1421
1422 if (ci->init)
1423 ci->init(stmpe);
1424
1425 irq_gpio = devm_gpiod_get_optional(ci->dev, "irq", GPIOD_ASIS);
1426 ret = PTR_ERR_OR_ZERO(irq_gpio);
1427 if (ret) {
1428 dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n", ret);
1429 return ret;
1430 }
1431
1432 if (irq_gpio) {
1433 stmpe->irq = gpiod_to_irq(irq_gpio);
1434 pdata->irq_trigger = gpiod_is_active_low(irq_gpio) ?
1435 IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
1436 } else {
1437 stmpe->irq = ci->irq;
1438 pdata->irq_trigger = IRQF_TRIGGER_NONE;
1439 }
1440
1441 if (stmpe->irq < 0) {
1442 /* use alternate variant info for no-irq mode, if supported */
1443 dev_info(stmpe->dev,
1444 "%s configured in no-irq mode by platform data\n",
1445 stmpe->variant->name);
1446 if (!stmpe_noirq_variant_info[stmpe->partnum]) {
1447 dev_err(stmpe->dev,
1448 "%s does not support no-irq mode!\n",
1449 stmpe->variant->name);
1450 return -ENODEV;
1451 }
1452 stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
1453 } else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
1454 pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
1455 }
1456
1457 ret = stmpe_chip_init(stmpe);
1458 if (ret)
1459 return ret;
1460
1461 if (stmpe->irq >= 0) {
1462 ret = stmpe_irq_init(stmpe, np);
1463 if (ret)
1464 return ret;
1465
1466 ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
1467 stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
1468 "stmpe", stmpe);
1469 if (ret) {
1470 dev_err(stmpe->dev, "failed to request IRQ: %d\n",
1471 ret);
1472 return ret;
1473 }
1474 }
1475
1476 ret = stmpe_devices_init(stmpe);
1477 if (!ret)
1478 return 0;
1479
1480 dev_err(stmpe->dev, "failed to add children\n");
1481 mfd_remove_devices(stmpe->dev);
1482
1483 return ret;
1484 }
1485
stmpe_remove(struct stmpe * stmpe)1486 void stmpe_remove(struct stmpe *stmpe)
1487 {
1488 if (!IS_ERR(stmpe->vio) && regulator_is_enabled(stmpe->vio))
1489 regulator_disable(stmpe->vio);
1490 if (!IS_ERR(stmpe->vcc) && regulator_is_enabled(stmpe->vcc))
1491 regulator_disable(stmpe->vcc);
1492
1493 __stmpe_disable(stmpe, STMPE_BLOCK_ADC);
1494
1495 mfd_remove_devices(stmpe->dev);
1496 }
1497
1498 #ifdef CONFIG_PM
stmpe_suspend(struct device * dev)1499 static int stmpe_suspend(struct device *dev)
1500 {
1501 struct stmpe *stmpe = dev_get_drvdata(dev);
1502
1503 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1504 enable_irq_wake(stmpe->irq);
1505
1506 return 0;
1507 }
1508
stmpe_resume(struct device * dev)1509 static int stmpe_resume(struct device *dev)
1510 {
1511 struct stmpe *stmpe = dev_get_drvdata(dev);
1512
1513 if (stmpe->irq >= 0 && device_may_wakeup(dev))
1514 disable_irq_wake(stmpe->irq);
1515
1516 return 0;
1517 }
1518
1519 const struct dev_pm_ops stmpe_dev_pm_ops = {
1520 .suspend = stmpe_suspend,
1521 .resume = stmpe_resume,
1522 };
1523 #endif
1524