1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * drivers/hwmon/lis3lv02d_i2c.c
4 *
5 * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
6 * Driver is based on corresponding SPI driver written by Daniel Mack
7 * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
8 *
9 * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
10 *
11 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
12 */
13
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/err.h>
17 #include <linux/i2c.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/delay.h>
20 #include <linux/of.h>
21 #include <linux/of_platform.h>
22 #include <linux/of_device.h>
23
24 #include "lis3lv02d.h"
25
26 #define DRV_NAME "lis3lv02d_i2c"
27
28 static const char reg_vdd[] = "Vdd";
29 static const char reg_vdd_io[] = "Vdd_IO";
30
lis3_reg_ctrl(struct lis3lv02d * lis3,bool state)31 static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
32 {
33 int ret;
34 if (state == LIS3_REG_OFF) {
35 ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
36 lis3->regulators);
37 } else {
38 ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
39 lis3->regulators);
40 /* Chip needs time to wakeup. Not mentioned in datasheet */
41 usleep_range(10000, 20000);
42 }
43 return ret;
44 }
45
lis3_i2c_write(struct lis3lv02d * lis3,int reg,u8 value)46 static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
47 {
48 struct i2c_client *c = lis3->bus_priv;
49 return i2c_smbus_write_byte_data(c, reg, value);
50 }
51
lis3_i2c_read(struct lis3lv02d * lis3,int reg,u8 * v)52 static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
53 {
54 struct i2c_client *c = lis3->bus_priv;
55 *v = i2c_smbus_read_byte_data(c, reg);
56 return 0;
57 }
58
lis3_i2c_blockread(struct lis3lv02d * lis3,int reg,int len,u8 * v)59 static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
60 u8 *v)
61 {
62 struct i2c_client *c = lis3->bus_priv;
63 reg |= (1 << 7); /* 7th bit enables address auto incrementation */
64 return i2c_smbus_read_i2c_block_data(c, reg, len, v);
65 }
66
lis3_i2c_init(struct lis3lv02d * lis3)67 static int lis3_i2c_init(struct lis3lv02d *lis3)
68 {
69 u8 reg;
70 int ret;
71
72 lis3_reg_ctrl(lis3, LIS3_REG_ON);
73
74 lis3->read(lis3, WHO_AM_I, ®);
75 if (reg != lis3->whoami)
76 printk(KERN_ERR "lis3: power on failure\n");
77
78 /* power up the device */
79 ret = lis3->read(lis3, CTRL_REG1, ®);
80 if (ret < 0)
81 return ret;
82
83 if (lis3->whoami == WAI_3DLH)
84 reg |= CTRL1_PM0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
85 else
86 reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
87
88 return lis3->write(lis3, CTRL_REG1, reg);
89 }
90
91 /* Default axis mapping but it can be overwritten by platform data */
92 static union axis_conversion lis3lv02d_axis_map =
93 { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
94
95 #ifdef CONFIG_OF
96 static const struct of_device_id lis3lv02d_i2c_dt_ids[] = {
97 { .compatible = "st,lis3lv02d" },
98 {}
99 };
100 MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
101 #endif
102
lis3lv02d_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)103 static int lis3lv02d_i2c_probe(struct i2c_client *client,
104 const struct i2c_device_id *id)
105 {
106 int ret = 0;
107 struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
108
109 #ifdef CONFIG_OF
110 if (of_match_device(lis3lv02d_i2c_dt_ids, &client->dev)) {
111 lis3_dev.of_node = client->dev.of_node;
112 ret = lis3lv02d_init_dt(&lis3_dev);
113 if (ret)
114 return ret;
115 pdata = lis3_dev.pdata;
116 }
117 #endif
118
119 if (pdata) {
120 if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
121 (i2c_check_functionality(client->adapter,
122 I2C_FUNC_SMBUS_I2C_BLOCK)))
123 lis3_dev.blkread = lis3_i2c_blockread;
124
125 if (pdata->axis_x)
126 lis3lv02d_axis_map.x = pdata->axis_x;
127
128 if (pdata->axis_y)
129 lis3lv02d_axis_map.y = pdata->axis_y;
130
131 if (pdata->axis_z)
132 lis3lv02d_axis_map.z = pdata->axis_z;
133
134 if (pdata->setup_resources)
135 ret = pdata->setup_resources();
136
137 if (ret)
138 goto fail;
139 }
140
141 lis3_dev.regulators[0].supply = reg_vdd;
142 lis3_dev.regulators[1].supply = reg_vdd_io;
143 ret = regulator_bulk_get(&client->dev,
144 ARRAY_SIZE(lis3_dev.regulators),
145 lis3_dev.regulators);
146 if (ret < 0)
147 goto fail;
148
149 lis3_dev.pdata = pdata;
150 lis3_dev.bus_priv = client;
151 lis3_dev.init = lis3_i2c_init;
152 lis3_dev.read = lis3_i2c_read;
153 lis3_dev.write = lis3_i2c_write;
154 lis3_dev.reg_ctrl = lis3_reg_ctrl;
155 lis3_dev.irq = client->irq;
156 lis3_dev.ac = lis3lv02d_axis_map;
157 lis3_dev.pm_dev = &client->dev;
158
159 i2c_set_clientdata(client, &lis3_dev);
160
161 /* Provide power over the init call */
162 lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
163
164 ret = lis3lv02d_init_device(&lis3_dev);
165
166 lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
167
168 if (ret)
169 goto fail2;
170 return 0;
171
172 fail2:
173 regulator_bulk_free(ARRAY_SIZE(lis3_dev.regulators),
174 lis3_dev.regulators);
175 fail:
176 if (pdata && pdata->release_resources)
177 pdata->release_resources();
178 return ret;
179 }
180
lis3lv02d_i2c_remove(struct i2c_client * client)181 static void lis3lv02d_i2c_remove(struct i2c_client *client)
182 {
183 struct lis3lv02d *lis3 = i2c_get_clientdata(client);
184 struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
185
186 if (pdata && pdata->release_resources)
187 pdata->release_resources();
188
189 lis3lv02d_joystick_disable(lis3);
190 lis3lv02d_remove_fs(&lis3_dev);
191
192 regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
193 lis3_dev.regulators);
194 }
195
196 #ifdef CONFIG_PM_SLEEP
lis3lv02d_i2c_suspend(struct device * dev)197 static int lis3lv02d_i2c_suspend(struct device *dev)
198 {
199 struct i2c_client *client = to_i2c_client(dev);
200 struct lis3lv02d *lis3 = i2c_get_clientdata(client);
201
202 if (!lis3->pdata || !lis3->pdata->wakeup_flags)
203 lis3lv02d_poweroff(lis3);
204 return 0;
205 }
206
lis3lv02d_i2c_resume(struct device * dev)207 static int lis3lv02d_i2c_resume(struct device *dev)
208 {
209 struct i2c_client *client = to_i2c_client(dev);
210 struct lis3lv02d *lis3 = i2c_get_clientdata(client);
211
212 /*
213 * pm_runtime documentation says that devices should always
214 * be powered on at resume. Pm_runtime turns them off after system
215 * wide resume is complete.
216 */
217 if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
218 pm_runtime_suspended(dev))
219 lis3lv02d_poweron(lis3);
220
221 return 0;
222 }
223 #endif /* CONFIG_PM_SLEEP */
224
225 #ifdef CONFIG_PM
lis3_i2c_runtime_suspend(struct device * dev)226 static int lis3_i2c_runtime_suspend(struct device *dev)
227 {
228 struct i2c_client *client = to_i2c_client(dev);
229 struct lis3lv02d *lis3 = i2c_get_clientdata(client);
230
231 lis3lv02d_poweroff(lis3);
232 return 0;
233 }
234
lis3_i2c_runtime_resume(struct device * dev)235 static int lis3_i2c_runtime_resume(struct device *dev)
236 {
237 struct i2c_client *client = to_i2c_client(dev);
238 struct lis3lv02d *lis3 = i2c_get_clientdata(client);
239
240 lis3lv02d_poweron(lis3);
241 return 0;
242 }
243 #endif /* CONFIG_PM */
244
245 static const struct i2c_device_id lis3lv02d_id[] = {
246 {"lis3lv02d", LIS3LV02D},
247 {"lis331dlh", LIS331DLH},
248 {}
249 };
250
251 MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
252
253 static const struct dev_pm_ops lis3_pm_ops = {
254 SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
255 lis3lv02d_i2c_resume)
256 SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
257 lis3_i2c_runtime_resume,
258 NULL)
259 };
260
261 static struct i2c_driver lis3lv02d_i2c_driver = {
262 .driver = {
263 .name = DRV_NAME,
264 .pm = &lis3_pm_ops,
265 .of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids),
266 },
267 .probe = lis3lv02d_i2c_probe,
268 .remove = lis3lv02d_i2c_remove,
269 .id_table = lis3lv02d_id,
270 };
271
272 module_i2c_driver(lis3lv02d_i2c_driver);
273
274 MODULE_AUTHOR("Nokia Corporation");
275 MODULE_DESCRIPTION("lis3lv02d I2C interface");
276 MODULE_LICENSE("GPL");
277