1# SPDX-License-Identifier: GPL-2.0-only 2# 3# PHY Layer Configuration 4# 5 6config PHYLINK 7 tristate 8 depends on NETDEVICES 9 select PHYLIB 10 select SWPHY 11 help 12 PHYlink models the link between the PHY and MAC, allowing fixed 13 configuration links, PHYs, and Serdes links with MAC level 14 autonegotiation modes. 15 16menuconfig PHYLIB 17 tristate "PHY Device support and infrastructure" 18 depends on NETDEVICES 19 select MDIO_DEVICE 20 select MDIO_DEVRES 21 help 22 Ethernet controllers are usually attached to PHY 23 devices. This option provides infrastructure for 24 managing PHY devices. 25 26if PHYLIB 27 28config SWPHY 29 bool 30 31config LED_TRIGGER_PHY 32 bool "Support LED triggers for tracking link state" 33 depends on LEDS_TRIGGERS 34 help 35 Adds support for a set of LED trigger events per-PHY. Link 36 state change will trigger the events, for consumption by an 37 LED class driver. There are triggers for each link speed currently 38 supported by the PHY and also a one common "link" trigger as a 39 logical-or of all the link speed ones. 40 All these triggers are named according to the following pattern: 41 <mii bus id>:<phy>:<speed> 42 43 Where speed is in the form: 44 <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link 45 for any speed known to the PHY. 46 47 48config FIXED_PHY 49 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" 50 depends on PHYLIB 51 select SWPHY 52 help 53 Adds the platform "fixed" MDIO Bus to cover the boards that use 54 PHYs that are not connected to the real MDIO bus. 55 56 Currently tested with mpc866ads and mpc8349e-mitx. 57 58config SFP 59 tristate "SFP cage support" 60 depends on I2C && PHYLINK 61 depends on HWMON || HWMON=n 62 select MDIO_I2C 63 64comment "MII PHY device drivers" 65 66config AMD_PHY 67 tristate "AMD PHYs" 68 help 69 Currently supports the am79c874 70 71config MESON_GXL_PHY 72 tristate "Amlogic Meson GXL Internal PHY" 73 depends on ARCH_MESON || COMPILE_TEST 74 help 75 Currently has a driver for the Amlogic Meson GXL Internal PHY 76 77config ADIN_PHY 78 tristate "Analog Devices Industrial Ethernet PHYs" 79 help 80 Adds support for the Analog Devices Industrial Ethernet PHYs. 81 Currently supports the: 82 - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY 83 - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit 84 Ethernet PHY 85 86config ADIN1100_PHY 87 tristate "Analog Devices Industrial Ethernet T1L PHYs" 88 help 89 Adds support for the Analog Devices Industrial T1L Ethernet PHYs. 90 Currently supports the: 91 - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY 92 93config AQUANTIA_PHY 94 tristate "Aquantia PHYs" 95 help 96 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 97 98config AX88796B_PHY 99 tristate "Asix PHYs" 100 help 101 Currently supports the Asix Electronics PHY found in the X-Surf 100 102 AX88796B package. 103 104config BROADCOM_PHY 105 tristate "Broadcom 54XX PHYs" 106 select BCM_NET_PHYLIB 107 select BCM_NET_PHYPTP if NETWORK_PHY_TIMESTAMPING 108 depends on PTP_1588_CLOCK_OPTIONAL 109 help 110 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, 111 BCM5481, BCM54810 and BCM5482 PHYs. 112 113config BCM54140_PHY 114 tristate "Broadcom BCM54140 PHY" 115 depends on PHYLIB 116 depends on HWMON || HWMON=n 117 select BCM_NET_PHYLIB 118 help 119 Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. 120 121 This driver also supports the hardware monitoring of this PHY and 122 exposes voltage and temperature sensors. 123 124config BCM63XX_PHY 125 tristate "Broadcom 63xx SOCs internal PHY" 126 depends on BCM63XX || COMPILE_TEST 127 select BCM_NET_PHYLIB 128 help 129 Currently supports the 6348 and 6358 PHYs. 130 131config BCM7XXX_PHY 132 tristate "Broadcom 7xxx SOCs internal PHYs" 133 select BCM_NET_PHYLIB 134 help 135 Currently supports the BCM7366, BCM7439, BCM7445, and 136 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. 137 138config BCM84881_PHY 139 tristate "Broadcom BCM84881 PHY" 140 depends on PHYLIB 141 help 142 Support the Broadcom BCM84881 PHY. 143 144config BCM87XX_PHY 145 tristate "Broadcom BCM8706 and BCM8727 PHYs" 146 help 147 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. 148 149config BCM_CYGNUS_PHY 150 tristate "Broadcom Cygnus/Omega SoC internal PHY" 151 depends on ARCH_BCM_IPROC || COMPILE_TEST 152 depends on MDIO_BCM_IPROC 153 select BCM_NET_PHYLIB 154 help 155 This PHY driver is for the 1G internal PHYs of the Broadcom 156 Cygnus and Omega Family SoC. 157 158 Currently supports internal PHY's used in the BCM11300, 159 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, 160 BCM58303 & BCM58305 Broadcom Cygnus SoCs. 161 162config BCM_NET_PHYLIB 163 tristate 164 165config BCM_NET_PHYPTP 166 tristate 167 168config CICADA_PHY 169 tristate "Cicada PHYs" 170 help 171 Currently supports the cis8204 172 173config CORTINA_PHY 174 tristate "Cortina EDC CDR 10G Ethernet PHY" 175 help 176 Currently supports the CS4340 phy. 177 178config DAVICOM_PHY 179 tristate "Davicom PHYs" 180 help 181 Currently supports dm9161e and dm9131 182 183config ICPLUS_PHY 184 tristate "ICPlus PHYs" 185 help 186 Currently supports the IP175C and IP1001 PHYs. 187 188config LXT_PHY 189 tristate "Intel LXT PHYs" 190 help 191 Currently supports the lxt970, lxt971 192 193config INTEL_XWAY_PHY 194 tristate "Intel XWAY PHYs" 195 help 196 Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. 197 These PHYs are marked as standalone chips under the names 198 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel 199 SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. 200 201config LSI_ET1011C_PHY 202 tristate "LSI ET1011C PHY" 203 help 204 Supports the LSI ET1011C PHY. 205 206config MARVELL_PHY 207 tristate "Marvell Alaska PHYs" 208 help 209 Currently has a driver for the 88E1XXX 210 211config MARVELL_10G_PHY 212 tristate "Marvell Alaska 10Gbit PHYs" 213 help 214 Support for the Marvell Alaska MV88X3310 and compatible PHYs. 215 216config MARVELL_88X2222_PHY 217 tristate "Marvell 88X2222 PHY" 218 help 219 Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet 220 Transceiver. 221 222config MAXLINEAR_GPHY 223 tristate "Maxlinear Ethernet PHYs" 224 select POLYNOMIAL if HWMON 225 depends on HWMON || HWMON=n 226 help 227 Support for the Maxlinear GPY115, GPY211, GPY212, GPY215, 228 GPY241, GPY245 PHYs. 229 230config MEDIATEK_GE_PHY 231 tristate "MediaTek Gigabit Ethernet PHYs" 232 help 233 Supports the MediaTek Gigabit Ethernet PHYs. 234 235config MICREL_PHY 236 tristate "Micrel PHYs" 237 depends on PTP_1588_CLOCK_OPTIONAL 238 help 239 Supports the KSZ9021, VSC8201, KS8001 PHYs. 240 241config MICROCHIP_PHY 242 tristate "Microchip PHYs" 243 help 244 Supports the LAN88XX PHYs. 245 246config MICROCHIP_T1_PHY 247 tristate "Microchip T1 PHYs" 248 help 249 Supports the LAN87XX PHYs. 250 251config MICROSEMI_PHY 252 tristate "Microsemi PHYs" 253 depends on MACSEC || MACSEC=n 254 depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING 255 select CRYPTO_LIB_AES if MACSEC 256 help 257 Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs 258 259config MOTORCOMM_PHY 260 tristate "Motorcomm PHYs" 261 help 262 Enables support for Motorcomm network PHYs. 263 Currently supports the YT8511 gigabit PHY. 264 265config NATIONAL_PHY 266 tristate "National Semiconductor PHYs" 267 help 268 Currently supports the DP83865 PHY. 269 270config NXP_C45_TJA11XX_PHY 271 tristate "NXP C45 TJA11XX PHYs" 272 depends on PTP_1588_CLOCK_OPTIONAL 273 help 274 Enable support for NXP C45 TJA11XX PHYs. 275 Currently supports only the TJA1103 PHY. 276 277config NXP_TJA11XX_PHY 278 tristate "NXP TJA11xx PHYs support" 279 depends on HWMON 280 help 281 Currently supports the NXP TJA1100 and TJA1101 PHY. 282 283config AT803X_PHY 284 tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs" 285 depends on REGULATOR 286 help 287 Currently supports the AR8030, AR8031, AR8033, AR8035 and internal 288 QCA8337(Internal qca8k PHY) model 289 290config QSEMI_PHY 291 tristate "Quality Semiconductor PHYs" 292 help 293 Currently supports the qs6612 294 295config REALTEK_PHY 296 tristate "Realtek PHYs" 297 help 298 Supports the Realtek 821x PHY. 299 300config RENESAS_PHY 301 tristate "Renesas PHYs" 302 help 303 Supports the Renesas PHYs uPD60620 and uPD60620A. 304 305config ROCKCHIP_PHY 306 tristate "Rockchip Ethernet PHYs" 307 help 308 Currently supports the integrated Ethernet PHY. 309 310config SMSC_PHY 311 tristate "SMSC PHYs" 312 help 313 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs 314 315config STE10XP 316 tristate "STMicroelectronics STe10Xp PHYs" 317 help 318 This is the driver for the STe100p and STe101p PHYs. 319 320config TERANETICS_PHY 321 tristate "Teranetics PHYs" 322 help 323 Currently supports the Teranetics TN2020 324 325config DP83822_PHY 326 tristate "Texas Instruments DP83822/825/826 PHYs" 327 help 328 Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S, 329 DP83826C and DP83826NC PHYs. 330 331config DP83TC811_PHY 332 tristate "Texas Instruments DP83TC811 PHY" 333 help 334 Supports the DP83TC811 PHY. 335 336config DP83848_PHY 337 tristate "Texas Instruments DP83848 PHY" 338 help 339 Supports the DP83848 PHY. 340 341config DP83867_PHY 342 tristate "Texas Instruments DP83867 Gigabit PHY" 343 help 344 Currently supports the DP83867 PHY. 345 346config DP83869_PHY 347 tristate "Texas Instruments DP83869 Gigabit PHY" 348 help 349 Currently supports the DP83869 PHY. This PHY supports copper and 350 fiber connections. 351 352config DP83TD510_PHY 353 tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY" 354 help 355 Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports 356 a 10M single pair Ethernet connection for up to 1000 meter cable. 357 358config VITESSE_PHY 359 tristate "Vitesse PHYs" 360 help 361 Currently supports the vsc8244 362 363config XILINX_GMII2RGMII 364 tristate "Xilinx GMII2RGMII converter driver" 365 help 366 This driver support xilinx GMII to RGMII IP core it provides 367 the Reduced Gigabit Media Independent Interface(RGMII) between 368 Ethernet physical media devices and the Gigabit Ethernet controller. 369 370endif # PHYLIB 371 372config MICREL_KS8995MA 373 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" 374 depends on SPI 375