1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * (c) Copyright 2002-2010, Ralink Technology, Inc.
4 * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
5 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
6 * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl>
7 */
8
9 #include "mt76x0.h"
10 #include "eeprom.h"
11 #include "mcu.h"
12 #include "initvals.h"
13 #include "initvals_init.h"
14 #include "../mt76x02_phy.h"
15
16 static void
mt76x0_set_wlan_state(struct mt76x02_dev * dev,u32 val,bool enable)17 mt76x0_set_wlan_state(struct mt76x02_dev *dev, u32 val, bool enable)
18 {
19 u32 mask = MT_CMB_CTRL_XTAL_RDY | MT_CMB_CTRL_PLL_LD;
20
21 /* Note: we don't turn off WLAN_CLK because that makes the device
22 * not respond properly on the probe path.
23 * In case anyone (PSM?) wants to use this function we can
24 * bring the clock stuff back and fixup the probe path.
25 */
26
27 if (enable)
28 val |= (MT_WLAN_FUN_CTRL_WLAN_EN |
29 MT_WLAN_FUN_CTRL_WLAN_CLK_EN);
30 else
31 val &= ~(MT_WLAN_FUN_CTRL_WLAN_EN);
32
33 mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
34 udelay(20);
35
36 /* Note: vendor driver tries to disable/enable wlan here and retry
37 * but the code which does it is so buggy it must have never
38 * triggered, so don't bother.
39 */
40 if (enable && !mt76_poll(dev, MT_CMB_CTRL, mask, mask, 2000))
41 dev_err(dev->mt76.dev, "PLL and XTAL check failed\n");
42 }
43
mt76x0_chip_onoff(struct mt76x02_dev * dev,bool enable,bool reset)44 void mt76x0_chip_onoff(struct mt76x02_dev *dev, bool enable, bool reset)
45 {
46 u32 val;
47
48 val = mt76_rr(dev, MT_WLAN_FUN_CTRL);
49
50 if (reset) {
51 val |= MT_WLAN_FUN_CTRL_GPIO_OUT_EN;
52 val &= ~MT_WLAN_FUN_CTRL_FRC_WL_ANT_SEL;
53
54 if (val & MT_WLAN_FUN_CTRL_WLAN_EN) {
55 val |= (MT_WLAN_FUN_CTRL_WLAN_RESET |
56 MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
57 mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
58 udelay(20);
59
60 val &= ~(MT_WLAN_FUN_CTRL_WLAN_RESET |
61 MT_WLAN_FUN_CTRL_WLAN_RESET_RF);
62 }
63 }
64
65 mt76_wr(dev, MT_WLAN_FUN_CTRL, val);
66 udelay(20);
67
68 mt76x0_set_wlan_state(dev, val, enable);
69 }
70 EXPORT_SYMBOL_GPL(mt76x0_chip_onoff);
71
mt76x0_reset_csr_bbp(struct mt76x02_dev * dev)72 static void mt76x0_reset_csr_bbp(struct mt76x02_dev *dev)
73 {
74 mt76_wr(dev, MT_MAC_SYS_CTRL,
75 MT_MAC_SYS_CTRL_RESET_CSR |
76 MT_MAC_SYS_CTRL_RESET_BBP);
77 msleep(200);
78 mt76_clear(dev, MT_MAC_SYS_CTRL,
79 MT_MAC_SYS_CTRL_RESET_CSR |
80 MT_MAC_SYS_CTRL_RESET_BBP);
81 }
82
83 #define RANDOM_WRITE(dev, tab) \
84 mt76_wr_rp(dev, MT_MCU_MEMMAP_WLAN, \
85 tab, ARRAY_SIZE(tab))
86
mt76x0_init_bbp(struct mt76x02_dev * dev)87 static int mt76x0_init_bbp(struct mt76x02_dev *dev)
88 {
89 int ret, i;
90
91 ret = mt76x0_phy_wait_bbp_ready(dev);
92 if (ret)
93 return ret;
94
95 RANDOM_WRITE(dev, mt76x0_bbp_init_tab);
96
97 for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) {
98 const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i];
99 const struct mt76_reg_pair *pair = &item->reg_pair;
100
101 if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20))
102 mt76_wr(dev, pair->reg, pair->value);
103 }
104
105 RANDOM_WRITE(dev, mt76x0_dcoc_tab);
106
107 return 0;
108 }
109
mt76x0_init_mac_registers(struct mt76x02_dev * dev)110 static void mt76x0_init_mac_registers(struct mt76x02_dev *dev)
111 {
112 RANDOM_WRITE(dev, common_mac_reg_table);
113
114 /* Enable PBF and MAC clock SYS_CTRL[11:10] = 0x3 */
115 RANDOM_WRITE(dev, mt76x0_mac_reg_table);
116
117 /* Release BBP and MAC reset MAC_SYS_CTRL[1:0] = 0x0 */
118 mt76_clear(dev, MT_MAC_SYS_CTRL, 0x3);
119
120 /* Set 0x141C[15:12]=0xF */
121 mt76_set(dev, MT_EXT_CCA_CFG, 0xf000);
122
123 mt76_clear(dev, MT_FCE_L2_STUFF, MT_FCE_L2_STUFF_WR_MPDU_LEN_EN);
124
125 /*
126 * tx_ring 9 is for mgmt frame
127 * tx_ring 8 is for in-band command frame.
128 * WMM_RG0_TXQMA: this register setting is for FCE to
129 * define the rule of tx_ring 9
130 * WMM_RG1_TXQMA: this register setting is for FCE to
131 * define the rule of tx_ring 8
132 */
133 mt76_rmw(dev, MT_WMM_CTRL, 0x3ff, 0x201);
134 }
135
mt76x0_mac_stop(struct mt76x02_dev * dev)136 void mt76x0_mac_stop(struct mt76x02_dev *dev)
137 {
138 int i = 200, ok = 0;
139
140 mt76_clear(dev, MT_TXOP_CTRL_CFG, MT_TXOP_ED_CCA_EN);
141
142 /* Page count on TxQ */
143 while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
144 (mt76_rr(dev, 0x0a30) & 0x000000ff) ||
145 (mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
146 msleep(10);
147
148 if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX, 0, 1000))
149 dev_warn(dev->mt76.dev, "Warning: MAC TX did not stop!\n");
150
151 mt76_clear(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX |
152 MT_MAC_SYS_CTRL_ENABLE_TX);
153
154 /* Page count on RxQ */
155 for (i = 0; i < 200; i++) {
156 if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
157 !mt76_rr(dev, 0x0a30) &&
158 !mt76_rr(dev, 0x0a34)) {
159 if (ok++ > 5)
160 break;
161 continue;
162 }
163 msleep(1);
164 }
165
166 if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
167 dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
168 }
169 EXPORT_SYMBOL_GPL(mt76x0_mac_stop);
170
mt76x0_init_hardware(struct mt76x02_dev * dev)171 int mt76x0_init_hardware(struct mt76x02_dev *dev)
172 {
173 int ret, i, k;
174
175 if (!mt76x02_wait_for_wpdma(&dev->mt76, 1000))
176 return -EIO;
177
178 /* Wait for ASIC ready after FW load. */
179 if (!mt76x02_wait_for_mac(&dev->mt76))
180 return -ETIMEDOUT;
181
182 mt76x0_reset_csr_bbp(dev);
183 ret = mt76x02_mcu_function_select(dev, Q_SELECT, 1);
184 if (ret)
185 return ret;
186
187 mt76x0_init_mac_registers(dev);
188
189 if (!mt76x02_wait_for_txrx_idle(&dev->mt76))
190 return -EIO;
191
192 ret = mt76x0_init_bbp(dev);
193 if (ret)
194 return ret;
195
196 dev->mt76.rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG);
197
198 for (i = 0; i < 16; i++)
199 for (k = 0; k < 4; k++)
200 mt76x02_mac_shared_key_setup(dev, i, k, NULL);
201
202 for (i = 0; i < 256; i++)
203 mt76x02_mac_wcid_setup(dev, i, 0, NULL);
204
205 ret = mt76x0_eeprom_init(dev);
206 if (ret)
207 return ret;
208
209 mt76x0_phy_init(dev);
210
211 return 0;
212 }
213 EXPORT_SYMBOL_GPL(mt76x0_init_hardware);
214
215 static void
mt76x0_init_txpower(struct mt76x02_dev * dev,struct ieee80211_supported_band * sband)216 mt76x0_init_txpower(struct mt76x02_dev *dev,
217 struct ieee80211_supported_band *sband)
218 {
219 struct ieee80211_channel *chan;
220 struct mt76_rate_power t;
221 s8 tp;
222 int i;
223
224 for (i = 0; i < sband->n_channels; i++) {
225 chan = &sband->channels[i];
226
227 mt76x0_get_tx_power_per_rate(dev, chan, &t);
228 mt76x0_get_power_info(dev, chan, &tp);
229
230 chan->orig_mpwr = (mt76x02_get_max_rate_power(&t) + tp) / 2;
231 chan->max_power = min_t(int, chan->max_reg_power,
232 chan->orig_mpwr);
233 }
234 }
235
mt76x0_register_device(struct mt76x02_dev * dev)236 int mt76x0_register_device(struct mt76x02_dev *dev)
237 {
238 int ret;
239
240 ret = mt76x02_init_device(dev);
241 if (ret)
242 return ret;
243
244 mt76x02_config_mac_addr_list(dev);
245
246 ret = mt76_register_device(&dev->mt76, true, mt76x02_rates,
247 ARRAY_SIZE(mt76x02_rates));
248 if (ret)
249 return ret;
250
251 if (dev->mphy.cap.has_5ghz) {
252 struct ieee80211_supported_band *sband;
253
254 sband = &dev->mphy.sband_5g.sband;
255 sband->vht_cap.cap &= ~IEEE80211_VHT_CAP_RXLDPC;
256 mt76x0_init_txpower(dev, sband);
257 }
258
259 if (dev->mphy.cap.has_2ghz)
260 mt76x0_init_txpower(dev, &dev->mphy.sband_2g.sband);
261
262 mt76x02_init_debugfs(dev);
263
264 return 0;
265 }
266 EXPORT_SYMBOL_GPL(mt76x0_register_device);
267